Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface coverage”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Water Uptake by Silica Nanopores: Impacts of Surface Hydrophilicity and Pore Size

Water uptake at 298 K by two mesoporous silicas with different pore sizes was studied using volumetric vapor sorption. Here, through variation of sample pretreatment temperature and time, the number of surface hydroxyl groups was varied, leading to marked changes in the water sorption behavior. With increasing surface hydroxyl density, the adsorption of water to the pore surfaces increases, leading to formation of a thicker and denser water sorption layer. The BET model was used to measure surface hydroxyl density from low pressure parts of water adsorption isotherms. Adsorption of water molecules scales with the number density of surface hydroxyl groups, and monolayer coverage is reached at reduced pressure of ca. 0.3. The onset of adsorption pore condensation of water shifts to lower reduced pressure with increasing surface hydroxyl density, indicating growing thickness of adsorption layers. However, the water pore condensation step of the desorption branch shifts to smaller reduced pressure with increasing surface hydroxylation, reducing the adsorption-desorption hysteresis width. An adsorbed phase model is utilized to calculate the distribution of pore water molecules between adsorbed and pore condensation phases, and characterize the density and thickness of the water sorption phase. In the smaller pores, the adsorbed phase forms a sparse monolayer, while approximately a bilayer is formed in the wider pores. The previously reported silica nanopore underfilling by water is confirmed and rationalized by a significantly reduced water density in the adsorbed phase with respect to bulk, while the pore core is filled with water of approximately bulk density.

36 MATERIALS SCIENCE↗

Hydrogen desorption from the surface and subsurface of cobalt

The influence of coverage on the diffusion of hydrogen into the subsurface of cobalt was studied using density functional theory (DFT) and temperature programmed desorption (TPD). DFT calculations show that as the hydrogen coverage on Co(0001) increases, the barrier for hydrogen diffusion into the bulk decreases by 20%. Additionally, subsurface hydrogen on a hydrogen covered surface was found to be more stable when compared to a clean cobalt surface. To test these theoretical findings experimentally, excited hydrogen was used in an ultra-high vacuum environment to access higher hydrogen coverages. Here, our TPD studies showed that at high hydrogen coverages, a sharp low temperature feature appeared, indicating the stabilization of subsurface hydrogen. Further DFT calculations indicate that this sharp low temperature feature results from associative hydrogen desorption from a hydrogen saturated surface with a population of subsurface hydrogen. Microkinetic modelling was used to model the TPD spectra for hydrogen desporption from cobalt with and without subsurface hydrogen, showing reasonable agreement with experiment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermally induced nanoscale structural and morphological changes for atomic-layer-deposited Pt on SrTiO{sub 3}(001).

Platinum grown by atomic layer deposition (ALD) on SrTiO{sub 3}(001) surfaces was studied as a function of Pt coverage and post-deposition thermal treatment. The combination of atomic-force microscopy, scanning electron microscopy, x-ray fluorescence, x-ray reflectivity, and grazing-incidence small-angle x-ray scattering reveals significant changes in the nanoscale surface morphology and crystallinity for the differently prepared films. Surfaces with Pt coverages from 1 to 40 monolayers (ML) show different initial morphologies that evolve into different final Pt microstructures after annealing to 800 C. These distinct nanoscale structural changes are explained by surface diffusion and the surface and interface energies for noble metals on oxides.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pd3Ag(111) as a Model System for Hydrogen Separation Membranes: Combined Effects of CO Adsorption and Surface Termination on the Activation of Molecular Hydrogen

Abstract The co-adsorption of hydrogen and carbon monoxide on Pd 3 Ag(111) alloy surfaces has been studied as a model system for Pd-Ag alloys in membrane and catalysis applications using periodic density functional theory calculations (PW91-GGA). We explored the effects of Pd–Ag surface composition, since segregation of silver towards and away from the surface has been suggested to explain the experimentally observed changes in H 2 activation, CO inhibition and reactivity. We found that CO pre-adsorbed on the surface weakens the adsorption of H on Pd 3 Ag(111) alloy surfaces irrespective of whether the surface termination corresponds to the bulk Pd 3 Ag composition, or is purely Pd-terminated. A higher coverage of H with CO present is obtained for the Pd-terminated surface; this surface also exhibits a larger range of chemical potentials for co-adsorbed hydrogen and CO. The barrier for H 2 activation increases with increasing CO coverage, but the surface composition has the largest impact on H 2 activation at intermediate CO coverage. The results imply that Pd-based membranes with typically ~ 23 wt% Ag are less prone to CO poisoning if the surface becomes Pd-terminated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Application of Multihop Relay for Performance Enhancement of AeroMACS Networks

A new transmission technology, based on IEEE 802.16-2009 (WiMAX), is currently being developed for airport surface communications. A C-band spectrum allocation at 5091-5150 MHz has been created by ITU to carry this application. The proposed technology, known as AeroMACS, will be used to support fixed and mobile ground to ground applications and services. This article proposes and demonstrates that IEEE 802.16j-amendment-based WiMAX is most feasible for AeroMACS applications. This amendment introduces multihop relay as an optional deployment that may be used to provide additional coverage and/or enhance the capacity of the network. Particular airport surface radio coverage situations for which IEEE 802.16-2009-WiMAX provides resolutions that are inefficient, costly, or excessively power consuming are discussed. In all these cases, it is argued that 16j technology offers a much better alternative. A major concern about deployment of AeroMACS is interference to co-allocated applications such as the Mobile Satellite Service (MSS) feeder link. Our initial simulation results suggest that no additional interference to MSS feeder link is caused by deployment of IEEE 802.16j-based AeroMACS.

Kamali, Behnam↗

Adsorption, charge transfer and a coverage-driven transition of alkali metals on rutile TiO 2 (110)

The interaction of alkali metals with metal oxide surfaces is central to tuning surface reactivity in heterogeneous catalysis and photocatalysis. Here we present a comprehensive DFT+U study of the adsorption of alkali metals (Li, Na, K, Rb, Cs) on the (110) surface of rutile TiO 2 . At low coverage (θ = 1/8), all alkali metals bind preferentially to bridging oxygen sites with adsorption energies in the range −4.06 to −3.33 eV, transferring nearly one full electron (0.92–0.99 |e|) to the substrate and inducing Ti 4+ → Ti 3+ reduction. The excess charge localizes preferentially at subsurface Ti sites in the form of small polarons. Diffusion barriers indicate facile motion along bridging-oxygen rows, whereas inter-row hopping is strongly hindered. Coverage effects were examined systematically for potassium: adsorption energy and charge transfer per K atom decrease monotonically with increasing θ. Strikingly, a sharp energy discontinuity occurs between θ = 4/8 and θ = 5/8 (ΔE ≈ 1 eV per atom), which we identify as a coverage-driven structural transition arising from steric packing constraints and enhanced K–K electrostatic repulsion once every (1×1) surface cell is occupied. This structural transition perfectly correlates with a dramatic drop in the work function down to an ultra-low minimum of 0.84 eV at θ=5/8, followed by a metallization- driven recovery at higher coverages. Ab initio molecular dynamics simulations confirm zigzag K arrangements at moderate coverage (θ = 1/3), while at high coverage (θ = 2/3) short-range K–K correlations emerge without long-range order. These results provide atomistic insight into the structure–activity relationships underlying alkali promotion effects on oxide-supported catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Application of Multihop Relay for Performance Enhancement of AeroMACS Networks

A new transmission technology, based on IEEE 802.16-2009 (WiMAX), is currently being developed for airport surface communications. A C-band spectrum allocation at 5091 to 5150 MHz has been created by International Telecommunications Union (ITU) to carry this application. The proposed technology, known as AeroMACS, will be used to support fixed and mobile ground to ground applications and services. This article proposes and demonstrates that IEEE 802.16j-amendment-based WiMAX is most feasible for AeroMACS applications. This amendment introduces multihop relay as an optional deployment that may be used to provide additional coverage and/or enhance the capacity of the network. Particular airport surface radio coverage situations for which IEEE 802.16-2009-WiMAX provides resolutions that are inefficient, costly, or excessively power consuming are discussed. In all these cases, it is argued that 16j technology offers a much better alternative. A major concern about deployment of AeroMACS is interference to co-allocated applications such as the Mobile Satellite Service (MSS) feeder link. Our initial simulation results suggest that no additional interference to MSS feeder link is caused by deployment of IEEE 802.16j-based AeroMACS.

Kamali, Behnam↗

Transmission X-ray scattering as a probe for complex liquid-surface structures

The need for functional materials calls for increasing complexity in self-assembly systems. As a result, the ability to probe both local structure and heterogeneities, such as phase-coexistence and domain morphologies, has become increasingly important to controlling self-assembly processes, including those at liquid surfaces. The traditional X-ray scattering methods for liquid surfaces, such as specular reflectivity and grazing-incidence diffraction, are not well suited to spatially resolving lateral heterogeneities due to large illuminated footprint. A possible alternative approach is to use scanning transmission X-ray scattering to simultaneously probe local intermolecular structures and heterogeneous domain morphologies on liquid surfaces. To test the feasibility of this approach, transmission small- and wide-angle X-ray scattering (TSAXS/TWAXS) studies of Langmuir films formed on water meniscus against a vertically immersed hydrophilic Si substrate were recently carried out. First-order diffraction rings were observed in TSAXS patterns from a monolayer of hexagonally packed gold nanoparticles and in TWAXS patterns from a monolayer of fluorinated fatty acids, both as a Langmuir monolayer on water meniscus and as a Langmuir–Blodgett monolayer on the substrate. The patterns taken at multiple spots have been analyzed to extract the shape of the meniscus surface and the ordered-monolayer coverage as a function of spot position. These results, together with continual improvement in the brightness and spot size of X-ray beams available at synchrotron facilities, support the possibility of using scanning-probe TSAXS/TWAXS to characterize heterogeneous structures at liquid surfaces.

Fukuto, Masafumi↗

Investigating the Global Biogeophysical Impact of Area and Mass Based Wood Harvest in a Vegetation Demography Model

Wood harvesting alters land surface properties and energy redistribution, but there is a lack of studies estimating these changes on a global scale. We coupled a vegetation demographic model, the Functionally Assembled Terrestrial Ecosystem Simulator, with the E3SM land model to perform offline model simulation to investigate the land biogeophysical responses, including canopy coverage, leaf area index, albedo, surface roughness length, and energy fluxes, to historical wood harvest on the global scale. In this study, we found 50% less harvested carbon (C) when choosing the area-based harvest rate as driving data that has not been spatially harmonized, compared to reharmonized mass-based harvesting. By considering the uncertainty from reconstruction of historical wood harvest time series and the choice of wood harvest approach in the model, continuous wood harvest (1850–2015) results in 5%–10% of canopy coverage loss, contributing 0.5%–1% increase of albedo over disturbed land, which is much stronger than a non-demographic land surface model. Changes in energy flux from the wood harvest are negligible (<1%), but the responses of land surface properties vary (up to 30%) due to differences in model structure between the single canopy, sun-shade leaf model and vegetation demographic model.

Shu, Shijie [Lawrence Berkeley National Laboratory↗

BEAST DB: Grand-Canonical Database of Electrocatalyst Properties

We present BEAST DB, an open-source database comprised of ab initio electrochemical data computed using grand-canonical density functional theory in implicit solvent at consistent calculation parameters. The database contains over 20,000 surface calculations and covers a broad set of heterogeneous catalyst materials and electrochemical reactions. Calculations were performed at self-consistent fixed potential as well as constant charge to facilitate comparisons to the computational hydrogen electrode. This article presents common use cases of the database to rationalize trends in catalyst activity, screen catalyst material spaces, understand elementary mechanistic steps, analyze the electronic structure, and train machine learning models to predict higher fidelity properties. Users can interact graphically with the database by querying for individual calculations to gain a granular understanding of reaction steps or by querying for an entire reaction pathway on a given material using an interactive reaction pathway tool. BEAST DB will be periodically updated, with planned future updates to include advanced electronic structure data, surface speciation studies, and greater reaction coverage.

database↗

Oxidation of H 2 S by coadsorbed oxygen on the α-Cr 2 O 3 (0001) surface

The interactions of H 2 S and oxygen have been explored on the α-Cr 2 O 3 (0001) surface using temperature programmed desorption (TPD), Auger electron spectroscopy (AES) and sticking coefficient measurements. H 2 S adsorbs with near unity sticking on the clean α-Cr 2 O 3 (0001) surface at 125 K up to a coverage of ~1.6 ML (where 1 ML is defined as the surface areal density of Cr 3+ sites). Reversible adsorption is evidenced in TPD by three desorption states evolving between 150 and 315 K. Although no S-containing decomposition products were observed in TPD, AES detected S on the surface after TPD indicating that some degree of irreversible decomposition occurred. The level of H 2 S decomposition on the clean surface was estimated to be between 0.2-0.5 ML using water TPD as an indicator of S site blocking. In contrast, preadsorbed O 2 at three temperatures (125, 400 and 800 K) exerted drastic changes on the surface chemistry of H 2 S seen on the clean surface. At 400 and 800 K, O 2 adsorption on clean α-Cr 2 O 3 (0001) is dissociative, populating the surface with chromyl groups (Cr=O) in the former case (corresponding to roughly 1 O per Cr 3+ surface site) and resulting in a nearly complete O-termination sheet (~3 O per Cr 3+ ) in the latter case. Little or no H2S chemistry is observed on the O-terminated surface based on TPD and AES. However, availability of Cr-coordination sites on the chromyl-terminated surface facilitated H 2 S adsorption and oxidation during TPD to SO 2 (445-470 K) and H 2 O (320 K). Isotopic-labeling studies suggest that the oxygen atom in the water product originates from dosed oxygen whereas that in the SO 2 product comes from the lattice. Similar results were obtained from H 2 S dosed on the surface pretreated with O 2 at 125 K, where O 2 adsorption is predominately molecular, except that S 2 was also detected in TPD at 525 K and the amount of SO 2 produced at 445 K decreased. These results suggest that atomically adsorbed oxygen effectively oxidizes H 2 S, but that molecularly adsorbed O 2 is key to the partial oxidation of H 2 S to elemental sulfur.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Density Functional Theory Study of the Initial Stages of Cl-Induced Degradation of α -Cr 2 O 3 Passive Film

The ion exchange and point defect models are two prominent models describing the role of anions, such as chlorides, in the degradation of passive oxide films. Here the thermodynamic feasibility of critical steps of Cl-induced degradation of a hydroxylated α-Cr 2 O 3 (0001) surface, as proposed by these two models, are studied. Both models begin with Cl substitution of surface OH and H 2 O, which becomes less favorable with increasing Cl coverage. The initial stages of Cl-induced breakdown of the α-Cr 2 O 3 depend on Cl coverage and the presence of O vacancy near the surface as follows: (1) neither Cl insertion (supporting the ion exchange model) nor Cr vacancy formation (supporting the point defect model) is feasible at low Cl coverages except in the presence of O vacancies near the surface, where Cl insertion is thermodynamically feasible even at low coverages, (2) in the absence of O vacancies, Cr vacancy formation becomes feasible from 10/12 ML onwards whereas Cl insertion by exchange with subsurface OH only becomes feasible at full coverage. This implies that at higher coverages Cl-induced degradation first initiates through a vacancy formation mechanism, but both insertion and vacancy formation would be feasible at full coverage.

36 MATERIALS SCIENCE↗

Seasonal Changes in Surface Temperatures on Titan

The surface brightness temperatures on Titan have been measured by the Composite Infrared Spectrometer (CIRS) aboard Cassini during the period spanning late northern winter through vernal equinox. CIRS observes radiance from the surface through a spectral window at 19 microns where the atmosphere has an opacity minimum [I]. CIRS is now seeing a shift in the latitudinal distribution of temperatures froth a distinctly warmer south to a more symmetrical north -south pattern, similar to that found by Voyager IRIS [2,3] at the time of the previous vernal equinox. Near the equator the temperatures remain close to the 93.7 K value found at the surface by Huygens [4]. From the equator to the poles the temperature gradients are 2-3 K. When compared with predictions froth general circulation models [5] the measured temperatures and their seasonal changes constrain the possible types of surface material. As Cassini continues through Titan's northern spring CiRS will extend its, global coverage to took for correlations between surface temperatures and albedo and to search for diurnal temperature variations

Jennings, D. E.↗

Diffusion and photon-stimulated desorption of CO on TiO2(110)

Thermal diffusion of CO adsorbed on rutile TiO2(110) was studied in the 20 - 110 K range using photon-stimulated desorption (PSD), temperature programmed desorption (TPD) and scanning tunneling microscopy. During UV irradiation, CO desorbs from certain photoactive sites (e.g. oxygen vacancies). This phenomenon was exploited to study CO thermal diffusion in three steps: first empty these sites during a first irradiation cycle, then replenish them with CO during annealing, and finally probe the active site occupancy in the second PSD cycle. The PSD and TPD experiments show that the CO diffusion rate correlates with the CO adsorption energy – stronger binding corresponds to slower diffusion. Increasing the CO coverage or hydroxylation of the surface decreases the CO binding and increases the CO diffusion rate. Relative to the reduced surface, the CO adsorption energy increases and the diffusion decreases on the oxidized surface. The CO diffusion kinetics can be modeled satisfactorily as an Arrhenius process with a “normal” prefactor (i.e. = 1012 s 1) and a Gaussian distribution of activation energies where the peak of the distribution is ~0.28 eV and the full width at half maximum (FWHM) is 0.1 eV at the lowest coverages. The observations are consistent with a significant electrostatic component of the CO binding energy on the TiO2(110) surface which is affected by changes in the surface dipole and dipole-dipole interactions.

Petrik, Nikolay G.↗

Scaling of the structural characteristics of nanoholes created by local droplet etching

We study the tuneability of nanoholes created by local droplet etching of AlGaAs surfaces with Al droplets at varied coverage θ of the deposited droplet material and process temperature T. For the contact angle of the as-grown droplets a mean value of 66° is determined, which depends neither on θ nor on T. The experimental results on the hole structural characteristics are interpreted in terms of scaling models yielding a general form f(θ,T)∝θ{sup q}exp(E/[k{sub B}T]), with constants q and E and Boltzmann's constant k{sub B}. In detail, the hole density varies from N = 4.0 × 10{sup 6} up to 1.5 × 10{sup 8} cm{sup −2}, and the scaling parameters are q = 0 and E = E{sub N} = 2.46 eV. The hole diameter varies from 50 up to 190 nm with scaling parameters q = 1/3 and E = −E{sub N}/3. Moreover, the hole depth varies from 9 up to 125 nm with q = 2/3 and E = −1.73 eV. Furthermore, a threshold coverage of at least 0.2 monolayers (ML) must be deposited before hole formation takes place. In situ electron diffraction indicates that these 0.2 ML are consumed for a surface reconstruction change from (3 × 1) to (2 × 1). For coverages above 2.0 ML holes with a bimodal depth distribution are observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A model for arsenic anti-site incorporation in GaAs grown by hydride vapor phase epitaxy

GaAs growth by hydride vapor phase epitaxy (HVPE) has regained interest as a potential route to low cost, high efficiency thin film photovoltaics. In order to attain the highest efficiencies, deep level defect incorporation in these materials must be understood and controlled. The arsenic anti-site defect, As{sub Ga} or EL2, is the predominant deep level defect in HVPE-grown GaAs. In the present study, the relationships between HVPE growth conditions and incorporation of EL2 in GaAs epilayers were determined. Epitaxial n-GaAs layers were grown under a wide range of deposition temperatures (T{sub D}) and gallium chloride partial pressures (P{sub GaCl}), and the EL2 concentration, [EL2], was determined by deep level transient spectroscopy. [EL2] agreed with equilibrium thermodynamic predictions in layers grown under conditions in which the growth rate, R{sub G}, was controlled by conditions near thermodynamic equilibrium. [EL2] fell below equilibrium levels when R{sub G} was controlled by surface kinetic processes, with the disparity increasing as R{sub G} decreased. The surface chemical composition during growth was determined to have a strong influence on EL2 incorporation. Under thermodynamically limited growth conditions, e.g., high T{sub D} and/or low P{sub GaCl}, the surface vacancy concentration was high and the bulk crystal was close to equilibrium with the vapor phase. Under kinetically limited growth conditions, e.g., low T{sub D} and/or high P{sub GaCl}, the surface attained a high GaCl coverage, blocking As adsorption. This competitive adsorption process reduced the growth rate and also limited the amount of arsenic that incorporated as As{sub Ga}. A defect incorporation model which accounted for the surface concentration of arsenic as a function of the growth conditions, was developed. This model was used to identify optimal growth parameters for the growth of thin films for photovoltaics, conditions in which a high growth rate and low [EL2] could be attained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Laboratory Study of the Effect of Frost Flowers on C Band Radar Backscatter from Sea Ice

C band images of Arctic sea ice taken by the ERS 1 synthetic aperture radar show transitory regions of enhanced radar backscatter from young sea ice. Published field observations associate this increase with frost flower growth and the capture of blowing snow by the flowers. To investigate the first part of this phenomenon, we carried out a laboratory experiment on the response of C band radar backscatter to frost flowers growing on the surface of newly formed saline ice. The experiment took place in a 5 m by 7 m by 1.2 m deep saline water pool located in a two-story indoor refrigerated facility at the Cold Regions Research and Engineering Laboratory. Sodium chloride ice was grown in this pool at an air temperature of -28 C. The frost flowers first appeared on the ice surface as dendrites and then changed to needles as the ice sheet grew thicker and the surface temperatures became colder. The frost flowers reached to a height of 10-15 mm, and beneath each cluster of frost flowers a slush layer formed to a thickness of approximately 4 mm. Far-field radar measurements of the backscatter from the ice were made at incident angles from 20 to 40 deg and at approximately 6-hour intervals throughout the 3-day period of the experiment. A backscatter minimum occurred early in the flower growth at the time coincident with an abrupt doubling in the ice surface salinity. Once the full flower coverage was achieved, we removed first the crystal flowers and then the slush layer from the ice surface. The results for these cases show that the crystals have little impact on the backscatter, while the underlying slush patches yield a backscatter increase of 3-5 dB over that of bare ice. The laboratory results suggest that this relative backscatter increase of approximately 5 dB can be used as an index to mark the full area coverage of frost flowers.

Nghiem, S. V.↗