Search NASA⌕ Search

SEARCH · Search NASA

Results for “Unstructured Mesh”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Development of a Novel Accelerator for Neutron Transport Solution Using the Galerkin Spectral Element Methods (Final Report)

This report summarizes the results of a three-year research project sponsored by the U.S. Department of Energy (DOE) Nuclear Energy University Program (NEUP) to develop and implement advanced acceleration schemes for the DOE NEAMS neutronics code PROTEUSSN. The project team included the University of Massachusetts Lowell, The Ohio State University, University of Michigan, and Argonne National Laboratory. The PROTEUS code is a high-fidelity capable deterministic neutron transport code based on unstructured finite element meshes, which solves the steady-state and transient neutron transport problem using the 2nd-order discrete ordinate method (SN2ND), the method of characteristics (MOC), and the advanced nodal transport method (NODAL). The DSA scheme has been implemented in PROTEUS to speed up SN transport calculations. The existing DSA scheme employs a consistent finite element formulation on the same fine mesh structure as the SN solution While the use of consistent discretizations makes the DSA method effective, it does not necessarily make it efficient because the numerical solution of a discretized elliptic diffusion problem itself can be costly, particularly when the problem size becomes large. We developed a new discontinuous Galerkin (DG) discretization of the diffusion equation, called DG-DSA, which can effectively and efficiently accelerate the SN transport iterations. As compared with the previous work, the novelty of our method is that the diffusion equation is solved on a coarse-mesh grid using the DG methods, and the DG diffusion discretization incorporates local hp adaptation, i.e., local adaptation of mesh size and/or polynomial degree, based on local total cross section (or optical thickness). Therefore, the resulting number of degrees of freedom (DOF) of the DG discretization is much less than the conventional consistent DSA discretizations, and thus DG-DSA can achieve significant improvement in computational efficiency. We implemented this scheme in PROTEUS-SN. In addition, we developed a new stabilization scheme named linear prolongation CMFD (lpCMFD). A novel feature of this scheme is that the conventional flat flux ratio–based scaling approach is replaced with a linear interpolation of the scalar flux differences at the coarse-mesh cell edges between the neutron transport and CMFD calculations. Fourier convergence analysis and numerical results show that lpCMFD is unconditionally stable and more effective than other CMFD based on acceleration schemes such as pCMFD, odCMFD. We also developed a new nonlinear diffusion acceleration scheme for solving neutron transport equations. This scheme, called LR-NDA, employs a local refinement approach on the framework of CMFD by solving a local boundary value problem of the scalar flux on the coarse-mesh structure to replace the piecewise constant scalar flux obtained by CMFD. The refined flux is then used to update the scalar flux in the neutron transport source iteration. It has been demonstrated that that LR-NDA is much more effective and stable than CMFD for a wide range of optical thicknesses. LR-NDA is a local adaptive method, which means LR-NDA does not necessarily require local refinement for all the coarse-mesh cells on the problem domain, i.e., it can be used only for relatively optically thick regions where the standard CMFD scheme would encounter the convergence problem.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Fuel Injection Dynamics and Composition Effects on RDE Performance

Rotating detonation engines (RDEs) provide a promising route to substantially increasing cycle efficiency in stationary gas turbines. Much of this increase relies on the ability to achieve consistent pressure gain within the combustor. In particular, the design of injectors that feed fuel and air into the detonation channel plays a crucial role. Such injectors have to ensure proper mixing of fuel and oxidizer, while minimizing backflow of detonation products into the feed plenums, and reduce susceptibility to the complex wave structures that exist within the combustor. From a practical perspective, such RDEs also need to operate with variable fuel composition. When fuel mixtures with components that possess vastly different oxidation pathways and time-scales are used, there could be additional losses through deflagrative burning instead of detonation-driven heat release. Such sensitivity to the complete flow path is akin to the physics of thermoacoustic instabilities in conventional gas turbines. In this sense, RDEs pose a unique research challenge: the performance of the device relies on the small-scale heat release process, which is highly dependent on the flow interactions within the full-scale system. As a result, canonical flow configurations, instrumented with detailed diagnostics or modeled using high-fidelity tools, but only focus on the small-scale processes will not contain the key system-level interactions. At the same time, macroscopic measurements and models that only capture system-level performance will not provide insight into the key sources of pressure losses. These couplings and sensitivities provide a formidable challenge to both experimental and simulation studies of the effects Thus, a joint experimental/computational program designed specifically to address these challenges was undertaken in this program. The focus of this program was on two key topics: a) the interaction between injector flow and the overall wave dynamics within the combustor, and b) the deflagration/detonation structure in multi-component fuels that are of practical interest. Both topics involve interaction of small-scale heat release processes with the geometry-dependent wave structure. Studies focused on the study of full-scale RDE systems, based on a 6-inch conventional annular geometry. Experimentally RDEs were studied using a combination of diagnostics. A combination of optical diagnostics and aero-thermo-acoustic analysis based on a combination of spectral and mode decomposition analysis was used to identify the dynamics of the detonation wave and other secondary waves that exist in the system. These studies have helped the identification and investigation of injector and detonation dynamics arising from coupling, and how they affect RDE mixing, detonation structure, operability and performance. Performance of RDEs was investigated through thrust stand measurements, which was used to evaluate the effective pressure gain generated by the system through the concept of equivalent available pressure. Optical diagnostics were developed and implemented to investigate the distribution of heat release, across the detonation wave. Novel optical diagnostics of NIR imaging was also developed and applied to investigate the high temperature / high pressure distribution across the detonation wave. In order to complement the experiments, the computational tools were geared to simulate the full experimental setup. GPU-based acceleration of the models and computations were developed to enable rapid simulation of the full system. In addition, the use of adaptive mesh refinement, and unstructured grid formulation, enabled the investigation of realistic geometries studied in the laboratory. The simulations produced a wealth of detail on the structure of the detonation wave under different operating conditions. Emphasis was placed on quantifying mixture pre-burning and the impact on wave propagation and structure.

03 NATURAL GAS↗

SCEPTRE 2.7 User's Guide

Sandia’s Computational Engine for Particle Transport for Radiation Effects (SCEPTRE) is a computer code that solves the linear Boltzmann transport equation, particularly targeting coupled photon-electron problems. It uses unstructured finite element meshes in space, multigroup in energy, and discrete ordinates (Sn) or other methods in angle. SCEPTRE uses an xml-based input file to specify the problem. This report documents the options and syntax of that input file.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

SCEPTRE 2.6 User's Guide

Sandia’s Computational Engine for Particle Transport for Radiation Effects (SCEPTRE) is a computer code that solves the linear Boltzmann transport equation, particularly targeting coupled photon-electron problems. It uses unstructured finite element meshes in space, multigroup in energy, and discrete ordinates (S n ) or other methods in angle. SCEPTRE uses an xml-based input file to specify the problem. This report documents the options and syntax of that input file.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Interim report on fuel cycle neutronics code development.

As part of the Global Nuclear Energy Partnership (GNEP), a fast reactor simulation program was launched in April 2007 to develop a suite of modern simulation tools specifically for the analysis and design of sodium cooled fast reactors. The general goal of the new suite of codes is to reduce the uncertainties and biases in the various areas of reactor design activities by enhanced prediction capabilities. Under this fast reactor simulation program, a high-fidelity deterministic neutron transport code named UNIC is being developed. The final objective is to produce an integrated, advanced neutronics code that allows the high fidelity description of a nuclear reactor and simplifies the multi-step design process by direct coupling with thermal-hydraulics and structural mechanics calculations. Currently there are three solvers for the neutron transport code incorporated in UNIC: PN2ND, SN2ND, and MOCFE. PN2ND is based on a second-order even-parity spherical harmonics discretization of the transport equation and its primary target area of use is the existing homogenization approaches that are prevalent in reactor physics. MOCFE is based upon the method of characteristics applied to an unstructured finite element mesh and its primary target area of use is the fine grained nature of the explicit geometrical problems which is the long term goal of this project. SN2ND is based on a second-order, even-parity discrete ordinates discretization of the transport equation and its primary target area is the modeling transition region between the PN2ND and MOCFE solvers. The major development goal in fiscal year 2008 for the MOCFE solver was to include a two-dimensional capability that is scalable to hundreds of processors. The short term goal of this solver is to solve two-dimensional representations of reactor systems such that the energy and spatial self-shielding are accounted for and reliable cross sections can be generated for the homogeneous calculations. In this report we present good results for an OECD benchmark obtained using the new two-dimensional capability of the MOCFE solver. Additional work on the MOCFE solver is focused on studying the current parallelization algorithms that can be applied to both the two- and three-dimensional implementations such that they are scalable to thousands of processors. The initial research into this topic indicates that, as expected, the current parallelization scheme is not sufficiently scalable for the detailed reactor geometry that it is intended for. As a consequence, we are starting the investigative research to determine the alternatives that are applicable for massively parallel machines. The major development goal in fiscal year 2008 for the PN2ND and SN2ND solvers was to introduce parallelism by angle and energy. The motivation for this is two-fold: (1) reduce the memory burden by picking a simpler preconditioner with reduced matrix storage and (2) improve parallel performance by solving the angular subsystems of the within group equation simultaneously. The solver development in FY2007 focused on using PETSc to solve the within group equation where only spatial parallelization was utilized. Because most homogeneous problems required relatively few spatial degrees of freedom (tens of thousands) the only way to improve the parallelism was to spread the angular moment subsystems across the parallel system. While the coding has been put into place for parallelization by space, angle, and group, we have not optimized any of the solvers and therefore do not give an assessment of the achievement of this work in this report. The immediate task to be completed is to implement and validate Tchebychev acceleration of the fission source iteration algorithm (inverse power method in this work) and optimize both the PN2ND and SN2ND solvers. We further intend to extend the applicability of the UNIC code by adding a first-order discrete ordinates solver termed SN1ST. Upon completion of this work, all memory usage problems are to be identified and studied in the solvers with the intent of making the new version of an exportable production code in either FY2008 or FY2009. This report covers the status of these tasks and discusses the work yet to be completed.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Novel Two-Scale Discretization Schemes for Lagrangian Hydrodynamics

In this report we propose novel higher order conservative schemes of discontinuous Galerkin (or DG) type for the equations of gas dynamics in Lagrangian coordinates suitable for general unstructured finite element meshes. The novelty of our approach is in the formulation of two-scale non-oscillatory function recovery procedures utilizing integral moments of the quantities of interest (pressure and velocity). The integral moments are computed on a primary mesh (cells or zones) which defines our original scale that governs the accuracy of the schemes. In the non-oscillatory smooth function recovery procedures, we introduce a finer mesh which defines the second scale. Mathematically, the recovery can be formulated as nonlinear energy functional minimization subject to equality and nonlinear inequality constraints. The schemes are highly accurate due to both the embedded (local) mesh refinement features as well as the ability to utilize higher order integral moments. The new DG schemes seem to offer an alternative to currently used artificial viscosity techniques and limiters since the two-scale recovery procedures aim at resolving these issues. We report on some preliminary tests for the lowest order case, and outline some possible future research directions.

99 GENERAL AND MISCELLANEOUS↗

Adaptive remeshing for three-dimensional compressible flow computations

A practical solution algorithm for steady 3D Euler flows is presented. This algorithm employs coupling of a surface triangulator, an automatic tetrahedral mesh generator, an unstructured grid flow solver, and an error estimation procedure. The performance of the method is illustrated using a shock interaction problem in high Mach number flow over a swept circular cylinder.

Peraire, J.↗

Experience with parametric binary dissection

Parametric Binary Dissection (PBD) is a new algorithm that can be used for partitioning graphs embedded in 2- or 3-dimensional space. It partitions explicitly on the basis of nodes + (lambda)x(edges cut), where lambda is the ratio of time to communicate over an edge to the time to compute at a node. The new algorithm is faster than the original binary dissection algorithm and attempts to obtain better partitions than the older algorithm, which only takes nodes into account. The performance of parametric dissection with plain binary dissection on 3 large unstructured 3-d meshes obtained from computational fluid dynamics and on 2 random graphs were compared. It was showm that the new algorithm can usually yield partitions that are substantially superior, but that its performance is heavily dependent on the input data.

Bokhari, Shahid H.↗

Portable Parallel Programming for the Dynamic Load Balancing of Unstructured Grid Applications

The ability to dynamically adapt an unstructured -rid (or mesh) is a powerful tool for solving computational problems with evolving physical features; however, an efficient parallel implementation is rather difficult, particularly from the view point of portability on various multiprocessor platforms We address this problem by developing PLUM, tin automatic anti architecture-independent framework for adaptive numerical computations in a message-passing environment. Portability is demonstrated by comparing performance on an SP2, an Origin2000, and a T3E, without any code modifications. We also present a general-purpose load balancer that utilizes symmetric broadcast networks (SBN) as the underlying communication pattern, with a goal to providing a global view of system loads across processors. Experiments on, an SP2 and an Origin2000 demonstrate the portability of our approach which achieves superb load balance at the cost of minimal extra overhead.

Biswas, Rupak↗

Parallel Processing of Adaptive Meshes with Load Balancing

Many scientific applications involve grids that lack a uniform underlying structure. These applications are often also dynamic in nature in that the grid structure significantly changes between successive phases of execution. In parallel computing environments, mesh adaptation of unstructured grids through selective refinement/coarsening has proven to be an effective approach. However, achieving load balance while minimizing interprocessor communication and redistribution costs is a difficult problem. Traditional dynamic load balancers are mostly inadequate because they lack a global view of system loads across processors. In this paper, we propose a novel and general-purpose load balancer that utilizes symmetric broadcast networks (SBN) as the underlying communication topology, and compare its performance with a successful global load balancing environment, called PLUM, specifically created to handle adaptive unstructured applications. Our experimental results on an IBM SP2 demonstrate that the SBN-based load balancer achieves lower redistribution costs than that under PLUM by overlapping processing and data migration.

Das, Sajal K.↗

Visualization of CFD Results in Immersive Virtual Environments

An object-oriented event-driven immersive virtual environment (VE) is described for the visualization of computational fluid dynamics (CFD) results. The VE incorporates the following types of primitive software objects: interface objects, support objects, geometric entities, and finite elements. The fluid domain is discretized using either a multi-block structured grid or an unstructured finite element mesh. The VE allows natural 'fly-through' visualization of the model, the CFD grid, and the model's surroundings. In order to help visualize the flow and its effects on the model, the VE incorporates the following objects: stream objects (lines, surface-restricted lines. ribbons. and volumes); colored surfaces; elevation surfaces; surface arrows; global and local iso-surfaces; vortex cores; and separation/attachment surfaces and lines. Most of these objects can be used for dynamically probing the flow. Particles and arrow animations can be displayed on top of stream objects. Primitive response quantities as well as derived quantities can be used. A recursive tree search algorithm is used for real-time point and value search in the CFD grid.

Wasfy, Tamer M.↗

Computational Modeling of Liquid and Gaseous Control Valves

In this paper computational modeling efforts undertaken at NASA Stennis Space Center in support of rocket engine component testing are discussed. Such analyses include structurally complex cryogenic liquid valves and gas valves operating at high pressures and flow rates. Basic modeling and initial successes are documented, and other issues that make valve modeling at SSC somewhat unique are also addressed. These include transient behavior, valve stall, and the determination of flow patterns in LOX valves. Hexahedral structured grids are used for valves that can be simplifies through the use of axisymmetric approximation. Hybrid unstructured methodology is used for structurally complex valves that have disparate length scales and complex flow paths that include strong swirl, local recirculation zones/secondary flow effects. Hexahedral (structured), unstructured, and hybrid meshes are compared for accuracy and computational efficiency. Accuracy is determined using verification and validation techniques.

Daines, Russell↗

Accuracy Quantification of the Loci-CHEM Code for Chamber Wall Heat Transfer in a GO2/GH2 Single Element Model Problem

All solutions with Loci-CHEM achieved demonstrated steady state and mesh convergence. Preconditioning had no effect on solution accuracy and typically yields a 3-5times solution speed-up. The SST turbulence model has superior performance, relative to the data in the head end region, for the rise rate and peak heat flux. It was slightly worse than the others in the downstream region where all over-predicted the data by 30-100%.There was systematic mesh refinement in the unstructured volume and structured boundary layer areas produced only minor solution differences. Mesh convergence was achieved. Overall, Loci-CHEM satisfactorily predicts heat flux rise rate and peak heat flux and significantly over predicts the downstream heat flux.

West, Jeff↗

Sensitivity Analysis of Multidisciplinary Rotorcraft Simulations

A multidisciplinary sensitivity analysis of rotorcraft simulations involving tightly coupled high-fidelity computational fluid dynamics and comprehensive analysis solvers is presented and evaluated. An unstructured sensitivity-enabled Navier-Stokes solver, FUN3D, and a nonlinear flexible multibody dynamics solver, DYMORE, are coupled to predict the aerodynamic loads and structural responses of helicopter rotor blades. A discretely-consistent adjoint-based sensitivity analysis available in FUN3D provides sensitivities arising from unsteady turbulent flows and unstructured dynamic overset meshes, while a complex-variable approach is used to compute DYMORE structural sensitivities with respect to aerodynamic loads. The multidisciplinary sensitivity analysis is conducted through integrating the sensitivity components from each discipline of the coupled system. Numerical results verify accuracy of the FUN3D/DYMORE system by conducting simulations for a benchmark rotorcraft test model and comparing solutions with established analyses and experimental data. Complex-variable implementation of sensitivity analysis of DYMORE and the coupled FUN3D/DYMORE system is verified by comparing with real-valued analysis and sensitivities. Correctness of adjoint formulations for FUN3D/DYMORE interfaces is verified by comparing adjoint-based and complex-variable sensitivities. Finally, sensitivities of the lift and drag functions obtained by complex-variable FUN3D/DYMORE simulations are compared with sensitivities computed by the multidisciplinary sensitivity analysis, which couples adjoint-based flow and grid sensitivities of FUN3D and FUN3D/DYMORE interfaces with complex-variable sensitivities of DYMORE structural responses.

Wang, Li↗

High-Fidelity Multidisciplinary Design Optimization Methodology with Application to Rotor Blades

A multidisciplinary design optimization procedure has been developed and applied to rotorcraft simulations involving tightly-coupled, high-fidelity computational fluid dynamics and comprehensive analysis. A discretely-consistent, adjoint-based sensitivity analysis available in the fluid dynamics solver provides sensitivities arising from unsteady turbulent flows on unstructured, dynamic, overset meshes, while a complex-variable approach is used to compute structural sensitivities with respect to aerodynamic loads. The multidisciplinary sensitivity analysis is conducted through integrating the sensitivity components from each discipline of the coupled system. Accuracy of the coupled system for high-fidelity rotorcraft analysis is verified; simulation results exhibit good agreement with established solutions. A constrained gradient-based design optimization for a HART-II rotorcraft configuration is demonstrated. The computational cost for individual components of the multidisciplinary sensitivity analysis is assessed and improved.

Wang, Li↗

High-fidelity Multidisciplinary Sensitivity Analysis and Design Optimization for Rotorcraft Applications

A multidisciplinary sensitivity analysis of rotorcraft simulations involving tightly coupled high-fidelity computational fluid dynamics and comprehensive analysis solvers is presented and evaluated. A sensitivity-enabled fluid dynamics solver and a nonlinear flexible multibody dynamics solver are coupled to predict aerodynamic loads and structural responses of helicopter rotor blades. A discretely consistent adjoint-based sensitivity analysis available in the fluid dynamics solver provides sensitivities arising from unsteady turbulent flows and unstructured dynamic overset meshes, while a complex-variable approach is used to compute structural sensitivities with respect to aerodynamic loads. The multidisciplinary sensitivity analysis is conducted through integrating the sensitivity components from each discipline of the coupled system. Accuracy of the coupled system is validated by conducting simulations for a benchmark rotorcraft model and comparing solutions with established analyses and experimental data. Sensitivities of lift computed by the multidisciplinary sensitivity analysis are verified by comparison with the sensitivities obtained by complex-variable simulations. Finally the multidisciplinary sensitivity analysis is applied to a constrained gradient-based design optimization for a HART-II rotorcraft configuration.

Wang, Li↗

Akuna - Integrated Toolsets Supporting Advanced Subsurface Flow and Transport Simulations for Environmental Management

A next generation open source subsurface simulator and user environment for environmental management is being developed through a collaborative effort across Department of Energy National Laboratories. The flow and transport simulator, Amanzi, will be capable of modeling complex subsurface environments and processes using both unstructured and adaptive meshes at very fine spatial resolutions that require supercomputing-scale resources. The user environment, Akuna, provides users with a range of tools to manage environmental and simulator data sets, create models, manage and share simulation data, and visualize results. Underlying the user interface are core toolsets that provide algorithms for sensitivity analysis, parameter estimation, and uncertainty quantification. Akuna is open-source, cross platform software that is initially being demonstrated on the Hanford BC Cribs remediation site. In this paper, we describe the emerging capabilities of Akuna and illustrate how these are being applied to the BC Cribs site.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

PRELIMINARY COUPLING OF THE MONTE CARLO CODE OPENMC AND THE MULTIPHYSICS OBJECT-ORIENTED SIMULATION ENVIRONMENT (MOOSE) FOR ANALYZING DOPPLER FEEDBACK IN MONTE CARLO SIMULATIONS

In recent years the use of Monte Carlo methods for modeling reactors has become feasible due to the increasing availability of massively parallel computer systems. One of the primary challenges yet to be fully resolved, however, is the efficient and accurate inclusion of multiphysics feedback in Monte Carlo simulations. The research in this paper presents a preliminary coupling of the open source Monte Carlo code OpenMC with the open source Multiphysics Object-Oriented Simulation Environment (MOOSE). The coupling of OpenMC and MOOSE will be used to investigate efficient and accurate numerical methods needed to include multiphysics feedback in Monte Carlo codes. An investigation into the sensitivity of Doppler feedback to fuel temperature approximations using a two dimensional 17x17 PWR fuel assembly is presented in this paper. The results show a functioning multiphysics coupling between OpenMC and MOOSE. The coupling utilizes Functional Expansion Tallies to accurately and efficiently transfer pin power distributions tallied in OpenMC to unstructured finite element meshes used in MOOSE. The two dimensional PWR fuel assembly case also demonstrates that for a simplified model the pin-by-pin doppler feedback can be adequately replicated by scaling a representative pin based on pin relative powers.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗