A general method of improving the accuracy of approximate solutions of circular cylindrical shells.
Improved Donnell equations for concentrated load of circular cylindrical shell
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Improved Donnell equations for concentrated load of circular cylindrical shell
The paper extends an approximate prediction method involving the integral form of the momentum equation to deduce the flow quantities of interest when compressibility effects become important and heat transfer may occur. The approximate method is applicable to a two-dimensional laminar boundary layer on an impermeable surface of negligible curvature for a specified integral momentum equation. The proposed approximate method involves the use of similar solutions in conjunction with the integral momentum equation for isentropic freestream flow of a perfect gas by assuming that viscosity is proportional to stagnation condition and Prandtl number is unity. The study pertains to larger values of acceleration (acceleration parameter to 20 rather than 2) than previously considered to account for rapidly accelerating flows such as in supersonic nozzles. A discussion of some applications confirms the advantages of the method in establishing better confidence in the predictions.
An alternative to an optimal method of automated classification of signals modulated with M-ary phase-shift-keying (M-ary PSK or MPSK) has been derived. The alternative method is approximate, but it offers nearly optimal performance and entails much less complexity, which translates to much less computation time. Modulation classification is becoming increasingly important in radio-communication systems that utilize multiple data modulation schemes and include software-defined or software-controlled receivers. Such a receiver may "know" little a priori about an incoming signal but may be required to correctly classify its data rate, modulation type, and forward error-correction code before properly configuring itself to acquire and track the symbol timing, carrier frequency, and phase, and ultimately produce decoded bits. Modulation classification has long been an important component of military interception of initially unknown radio signals transmitted by adversaries. Modulation classification may also be useful for enabling cellular telephones to automatically recognize different signal types and configure themselves accordingly. The concept of modulation classification as outlined in the preceding paragraph is quite general. However, at the present early stage of development, and for the purpose of describing the present alternative method, the term "modulation classification" or simply "classification" signifies, more specifically, a distinction between M-ary and M'-ary PSK, where M and M' represent two different integer multiples of 2. Both the prior optimal method and the present alternative method require the acquisition of magnitude and phase values of a number (N) of consecutive baseband samples of the incoming signal + noise. The prior optimal method is based on a maximum- likelihood (ML) classification rule that requires a calculation of likelihood functions for the M and M' hypotheses: Each likelihood function is an integral, over a full cycle of carrier phase, of a complicated sum of functions of the baseband sample values, the carrier phase, the carrier-signal and noise magnitudes, and M or M'. Then the likelihood ratio, defined as the ratio between the likelihood functions, is computed, leading to the choice of whichever hypothesis - M or M'- is more likely. In the alternative method, the integral in each likelihood function is approximated by a sum over values of the integrand sampled at a number, 1, of equally spaced values of carrier phase. Used in this way, 1 is a parameter that can be adjusted to trade computational complexity against the probability of misclassification. In the limit as 1 approaches infinity, one obtains the integral form of the likelihood function and thus recovers the ML classification. The present approximate method has been tested in comparison with the ML method by means of computational simulations. The results of the simulations have shown that the performance (as quantified by probability of misclassification) of the approximate method is nearly indistinguishable from that of the ML method (see figure).
Aeroassisted orbital transfer vehicles (AOTVs) and HSTs fly hypersonically at altitudes higher than those of Apollo and Space Shuttle type, whose flowfield could be considered a continuum with insignificant chemical nonequilibrium effects; AOTVs and HSTs will by contrast fly in the transitional regime between continuum and free molecule flow, where chemical nonequilibrium within the shock layer can be significant. Attention is presently given to the numerical and approximate methods of hypersonic flowfield calculation, emphasizing the role of aerodynamic heating. The development status of boundary layer methods, fully viscous methods, and gas models is evaluated.
In order to understand primordial and stellar nucleosynthesis, we have studied {sup 2}H(d,p){sup 3}H reaction at 0, 4 MeV down to astrophysical energies. Knowledge of this S-factor is interesting also to plan reactions for fusion reactors to produce energy. {sup 2}H(d,p){sup 3}H has been studied through the Trojan Horse Method applied to the three-body reaction {sup 2}H({sup 3}He,pt)H, at a beam energy of 17 MeV. Once protons and tritons are detected in coincidence and the quasi-free events are selected, the obtained S-factor has been compared with direct reactions results. Such data are in agreement with the direct ones, and a pole invariance test has been obtained comparing the present result with another {sup 2}H(d,p){sup 3}H THM one, performed with a different spectator particle (see fig. 1).
Generalized quantum master equations (GQMEs) are an important tool in modeling chemical and physical processes. For a large number of problems, it has been shown that exact and approximate quantum dynamics methods can be made dramatically more efficient, and in the latter case more accurate, by proceeding via the GQME formalism. However, there are many situations where utilizing the GQME approach with an approximate method has been observed to return the same dynamics as using that method directly. Here, for systems both in and out of equilibrium, we provide a more detailed understanding of the conditions under which using an approximate method can yield benefits when combined with the GQME formalism. In particular, we demonstrate the necessary manipulations, which are satisfied by exact quantum dynamics, that are required to recast the memory kernel in a form that can be analytically shown to yield the same result as a direct application of the dynamics regardless of the approximation used. By considering the connections between these forms of the kernel, we derive the conditions that approximate methods must satisfy if they are to offer different results when used in conjunction with the GQME formalism. These analytical results thus provide new insights as to when proceeding via the GQME approach can be used to improve the accuracy of simulations.
A new method for the solution of non-linear mathematical programming problems in the field of structural optimization is presented. It is an iterative scheme which for each iteration refines the approximation of objective and constraint functions by accumulating the function values of previously visited design points. The method has proven to be competitive for a number of well-known examples of which one is presented here. Furthermore because of the accumulation strategy, the method produces convergence even when the sensitivity analysis is inaccurate.
The use of broken-symmetry electronic structure methods is required in order to obtain correct behavior of electronically strained open-shell systems, such as transition states, biradicals, and transition metals. This approach often has issues with spin contamination, which can lead to significant errors in predicted energies, geometries, and properties. Approximate projection schemes are able to correct for spin contamination and can often yield improved results. To fully make use of these methods and to carry out exploration of the potential energy surface, it is desirable to develop an efficient second energy derivative theory. In this paper, we formulate the analytical second derivatives for the Yamaguchi approximate projection scheme, building on recent work that has yielded an efficient implementation of the analytical first derivatives.
The matched filtering technique that uses the cross correlation of a waveform of interest with archived signals from a template library has proven to be a powerful tool for detecting events in regions with repeating seismicity. However, waveform correlation is computationally expensive and therefore impractical for large template sets unless dedicated distributed computing hardware and software are used. In this paper, we introduce an approximate nearest neighbor (ANN) approach that enables the use of very large template libraries for waveform correlation. Our method begins with a projection into a reduced dimensionality space, based on correlation with a randomized subset of the full template archive. Searching for a specified number of nearest neighbors for a query waveform is accomplished by iteratively comparing it with the neighbors of its immediate neighbors. We used the approach to search for matches to each of ~2300 analyst-reviewed signal detections reported in May 2010 for the International Monitoring System station MKAR. The template library in this case consists of a data set of more than 200,000 analyst-reviewed signal detections for the same station from February 2002 to July 2016 (excluding May 2010). Of these signal detections, 73% are teleseismic first P and 17% regional phases (Pn, Pg, Sn, and Lg). Finally, the analyses performed on a standard desktop computer show that the proposed ANN approach performs a search of the large template libraries about 25 times faster than the standard full linear search and achieves recall rates greater than 80%, with the recall rate increasing for higher correlation thresholds.
The approximate axisymmetric method presented for accurately calculating the surface and flowfield properties of fully viscous hypersonic flow over blunt-nosed bodies incorporates the turbulence model of Cebeci-Smith (1970) and the equilibrium air tables of Hansen (1959). The method is faster than the parabolized Navier-Stokes or viscous shock layer solvers that it could replace for preliminary design determinations. Surface heat transfer and pressure predictions for the present method are comparable with the more accurate viscous shock layer method as well as flight test and wind tunnel data. A starting solution is not required.
In this work, we present composite Bernstein polynomials as a direct collocation method for approximating optimal control problems. An analysis of the convergence properties of composite Bernstein polynomials is provided, and beneficial properties of composite Bernstein polynomials for the solution of optimal control problems are discussed. The efficacy of the proposed approximation method is demonstrated through a bang-bang example. Lastly, we apply this method to a motion planning problem, offering a practical solution that emphasizes the ability of this method to solve complex optimal control problems.
Most neural network models do not specifically deal with temporal data. Handling of these variables is complicated by the different uses to which temporal data are put, depending on the application. Even within the same application, temporal variables are often used in a number of different ways. In this paper, types of temporal data are discussed, along with their implications for approximate reasoning. Methods for integrating approximate temporal reasoning into existing neural network structures are presented. These methods are illustrated in a medical application for diagnosis of graft-versus-host disease which requires the use of several types of temporal data.
It is shown, how analytical solutions of non-linear partial differential equations (PDE) may be applied for a design of their numerical solutions are considered. First, explicit particular exact and asymptotic solutions predict important features of the waves behavior even outside their formal applicability realized in numerics. Thus a prediction may be done whether an arbitrary initial condition splits into the train of localized waves, and each of these waves in numerical solution is described by the analytical travelling wave solution. This happens both for the bell-shaped and kink-shaped localized waves. Second application concerns the study of numerical dispersion and dissipation using the method of differential approximation. This method allows us to study defects of a discrete scheme by an analysis of a non-linear PDE obtained from the scheme. In particular, exact solutions of this equation help us to improve the scheme diminishing unwanted effects.
The time-dependent generator coordinate method (TDGCM) is a powerful method to study the largeamplitude collective motion of quantum many-body systems such as atomic nuclei. Under the GaussianOverlap Approximation (GOA), the TDGCM leads to a local, time-dependent Schrödinger equation in amulti-dimensional collective space. In this paper, we present the version 2.0 of the code FELIX that solvesthe collective Schrödinger equation in a finite element basis. This new version features: (i) the ability tosolve a generalized TDGCM+GOA equation with a metric term in the collective Hamiltonian, (ii) supportfor new kinds of finite elements and different types of quadrature to compute the discretized Hamiltonianand overlap matrices, (iii) the possibility to leverage the spectral element scheme, (iv) an explicit Krylovapproximation of the time propagator for time integration instead of the implicit Crank–Nicolson methodimplemented in the first version, (v) an entirely redesigned workflow. We benchmark this release on ananalytic problem as well as on realistic two-dimensional calculations of the low-energy fission of240Puand256Fm. Low to moderate numerical precision calculations are most efficiently performed with simplexelements with a degree 2 polynomial basis. Higher precision calculations should instead use the spectralelement method with a degree 4 polynomial basis. We emphasize that in a realistic calculation of fissionmass distributions of240Pu, FELIX-2.0 is about 20 times faster than its previous release (within a numericalprecision of a few percents).
An approximate semianalytical method for determination of interlaminar shear stress distribution through the thickness of an arbitrarily laminated thick plate has been presented. The method is based on the assumptions of transverse inextensibility and layerwise constant shear angle theory (LCST) and utilizes an assumed quadratic displacement potential energy based finite element method (FEM). Centroid of the triangular surface has been proved from a rigorous mathematical point of view (Aubin-Nitsche theory), to be the point of exceptional accuracy for the interlaminar shear stresses. Numerical results indicate close agreement with the available three-dimensional elasticity theory solutions. A comparison between the present theory and that due to an assumed stress hybrid FEM suggest that the (normal) traction-free-edge condition is not satisfied in the latter approach. Furthermore, the present paper is the first to present the results for interlaminar shear stresses in a two-layer thick square plate of balanced unsymmetric angle-ply construction. A comparison with the recently proposed Equilibrium Method (EM) indicates the superiority of the present method, because the latter assures faster convergence as well as simultaneous vanishing of the transverse shear stresses on both of the exposed surfaces of the laminate. Superiority of the present method over the EM, in the case of a symmetric laminate, is limited to faster convergence alone. It has also been demonstrated that the combination of the present method and the reduced (quadratic order) numerical integration scheme yields convergence of the interlaminar shear stresses almost as rapidly as that of the nodal displacements, in the case of a thin plate.
A comparison with NASA conducted simulator studies has shown that the approximate digital method for computing rotor blade flapping responses to random inputs, tentatively suggested in Phase I Report, gives with increasing rotor advance ratio the wrong trend. Consequently, three alternative methods of solution have been considered and are described: (1) an approximate method based on the functional relation between input and output double frequency spectra, (2) a numerical method based on the system responses to deterministic inputs and (3) a perturbation approach. Among these the perturbation method requires the least amount of computation and has been developed in two forms - the first form to obtain the response correlation function and the second for the time averaged spectra of flapping oscillations.
High-resolution skin-friction fields are extracted from pressure-sensitive paint (PSP) data obtained in shock-wave/boundary-layer interaction (SWBLI). The method of extracting skin friction from surface pressure is described, including the fundamental relation between skin friction and surface pressure, the variational method, error analysis, and an approximate iterative method. The proposed method is based on a coupling relation between skin friction and surface pressure, where the boundary enstrophy flux is suitably modeled or approximated. This method is applied to unsteady PSP data obtained in incident SWBLIs at Mach 2.5 for different Reynolds numbers, revealing the skin-friction structures of the flows: particularly, the separation bubble induced by the incident shock wave. The extracted results are in good agreement with the data obtained by the surface-stress-sensitive film.
Wave energy resource characterization investigations have been hindered because frequency-directional wave spectra are not broadly available for many coastal regions due to the insufficient spatial coverage of buoy observation networks and spectral wave model hindcast outputs. We address this problem by developing and validating a practical method for approximating temporally-averaged frequency-directional wave spectra averaged over periods of months or years from bulk wave parameters, which are available at a much greater coverage and resolution than frequency-directional wave spectra. While the temporally averaged frequency-directional wave spectrum over these periods cannot be used for analyzing a single sea state, it aggregates multiple sea states, identifies dominant wave energy systems representing wave climate, and resolves their spectral characteristics. Therefore, modelling temporally averaged frequency-directional wave spectra is of great value for planning and designing wave energy projects, e.g., resource characterization, site assessment, and conceptual design of wave energy converters. Temporally-averaged frequency-directional wave spectra and related important wave energy parameters approximated using this method are found to be more accurate than commonly used parametric wave spectrum models. This method can be applied to a wide range of wave climates given its universality and high accuracy. Also, the availability of bulk wave parameters from multi-decade high-resolution wave model hindcasts is increasing.