Search NASA⌕ Search

SEARCH · Search NASA

Results for “aqueous processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

A novel process for recycling and resynthesizing LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} from the cathode scraps intended for lithium-ion batteries

Highlights: • A simple process to recycle cathode scraps intended for lithium-ion batteries. • Complete separation of the cathode material from the aluminum foil is achieved. • The recovered aluminum foil is highly pure. • LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} is directly resynthesized from the separated cathode material. - Abstract: To solve the recycling challenge for aqueous binder based lithium-ion batteries (LIBs), a novel process for recycling and resynthesizing LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} from the cathode scraps generated during manufacturing process is proposed in this study. Trifluoroacetic acid (TFA) is employed to separate the cathode material from the aluminum foil. The effects of TFA concentration, liquid/solid (L/S) ratio, reaction temperature and time on the separation efficiencies of the cathode material and aluminum foil are investigated systematically. The cathode material can be separated completely under the optimal experimental condition of 15 vol.% TFA solution, L/S ratio of 8.0 mL g{sup −1}, reacting at 40 °C for 180 min along with appropriate agitation. LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} is successfully resynthesized from the separated cathode material by solid state reaction method. Several kinds of characterizations are performed to verify the typical properties of the resynthesized LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} powder. Electrochemical tests show that the initial charge and discharge capacities of the resynthesized LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} are 201 mAh g{sup −1} and 155.4 mAh g{sup −1} (2.8–4.5 V, 0.1 C), respectively. The discharge capacity remains at 129 mAh g{sup −1} even after 30 cycles with a capacity retention ratio of 83.01%.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The Flotation Chemistry of Nonsulfide Minerals

Particulate separations are of considerable significance in many areas of technology ranging from pharmaceutics and microelectronics, to mining and construction materials industries. In addition, particulate separation technology is of critical importance in the environmental area, for example, the development of advanced water treatment processes for the 21st century will rely on more efficient particulate separation techniques. In this regard it is most appropriate that the Separations Program of the Division of Chemical Sciences, Geosciences, and Biosciences, Office of Basic Energy Sciences, of DOE supports basic science research in the area of particulate separations. One such particulate separation process of special importance is froth flotation, a physico-chemical process that is used to separate particles in an aqueous suspension via differences in hydrophobicity as established by the interaction of various reagents at the solid/water, solid/gas and water/gas interfaces. Surfactants, called collectors, are added to a suspension to selectively adsorb at the surface of specific particles, rendering these particles hydrophobic. Regulators are employed to promote collector adsorption at the desired surfaces, while preventing such reactions at other surfaces. When air is dispersed into the suspension, the bubbles generated attach to the hydrophobic particles. The resulting bubble/particle aggregates float to the suspension surface and are collected in a froth phase as a concentrate. The remaining hydrophilic particles are retained in suspension and discharged as a tailings product. Clearly, particulate separation by froth flotation is an outstanding example of applied surface chemistry, and is used in the food, petroleum, pulp/paper, and mineral industries. The use of flotation technology is perhaps most significant in the mineral industry where, in the U. S. alone, over 500,000 tons/day of nonsulfide minerals are processed. The estimated value of all nonfuel mineral materials processed in the United States during 2015 totaled $630 billion. It is evident that particle separation by flotation is an important process that is used in many of the mineral industries. Understanding of the interfacial chemistry for the development of improved flotation separations is required for more effective production and utilization of our mineral resources, especially the critical minerals as identified in the 2017 USGS report, “Critical Mineral Resources of the United States – Economic and Environmental Geology and Prospects for Future Supply.” In this regard, a research program has been in progress with DOE support from Grant DE-FGO2-93ER14315 to study the fundamental interfacial chemistry features in nonsulfide mineral flotation systems in order to increase our understanding and provide for improved separation efficiencies and energy economy in the processing of our mineral resources. Significant contributions have been made to the flotation chemistry of flotation separations in many areas, including, salt minerals; collector adsorption; wetting, surface forces, bubble attachment; interfacial water structure; phyllosilicate minerals, and critical mineral resources such as rare earth minerals and lithium resources. The research results summarized herein have resulted in more than 225 publications, the education of 28 PhD graduate students, and impressive recognition with university, national, and international awards. For example, among many other awards, Distinguished Professor Jan Miller, PI, was elected to be a member of the National Academy of Engineering (1993) and the National Academy of Inventors (2014). In 2015 he received the University of Utah’s most prestigious award presented annually to a faculty member, the Rosenblatt Prize for Excellence. Research Professor Xuming Wang was selected by SME to be a Henry Krumb Lecturer (2013-2014), and many of the student researchers involved in the program received national awards from AIME, ICE, IPMI, SME, and TMS. It is evident that the flotation separation research program has been quite successful. Unfortunately, the flotation chemistry research for mineral particle separation has been terminated even though the renewal proposal received excellent reviews with recommended funding. The need for continued support of minerals separation research is of critical importance as recognized by 1) the recent 2017 USGS report, “Critical Mineral Resources of the United States – Economic and Environmental Geology and Prospects for Future Supply,” and by 2) the 20 December 2017 executive order from President Trump to increase the discovery, production, and domestic refining of critical minerals. In view of our research accomplishments, the excellent reviews of the renewal proposal, and the expressed need for attention to the production of critical minerals, termination of “The Flotation Chemistry of Nonsulfide Minerals” research program by DOE is not appropriate, and continued support should be reconsidered.

58 GEOSCIENCES↗

Interinstitutional Study of the New EURO-GANEX Process Resistance by Gamma Irradiation Test Loops

As part of the homogeneous actinides recycling strategy, the EURO-GANEX process is one of the most promising options to achieve the goal of minor actinides recovery. However, EURO-GANEX also has various drawbacks that are being addressed. Improvements made to EURO-GANEX system have resulted in the emergence of the so-called New EURO-GANEX process, where the composition of the solvent has been modified by replacing TODGA and DMDOHEMA with cis-mTDDGA in the organic phase and SO3-Ph-BTP with PyTri-Diol in the aqueous phase in order to resolve important issues. The objective of this work is twofold: evaluate the gamma radiolysis resistance of the new EURO-GANEX process by dynamic irradiation conditions simulating the three main steps of the process and validate the design of CIEMAT Náyade, CEA Marcel and INL irradiation loop devices since each of them mimics different aspects of the real process. Náyade and the INL loops could irradiate together the organic and aqueous phases, whereas in the CEA loop, the irradiated solvent is recycled continuously inside a platform with several stages of mixer-settlers containing aqueous flows simulating the three main steps of the process. The extraction performances and changes in the composition of the solvent have been analysed during the irradiation experiment by different techniques: gamma spectrometry and ICP-MS/OES for cations or tracers extraction, and HPLC-MS to quantify the degradation and evaluate the degradation compounds. Additionally, in spite of some differences between the three-irradiation facilities, this inter-institutional study shows that they are three comparative tools, which provide results on the stability towards radiolysis of a liquid-liquid extraction system. Favourable extraction results for the different steps are obtained according to the static irradiation studies found in literature. However, the degradation of cis-mTDDGA is appreciable leading to degradation compounds, some of which form precipitates and produce important changes in viscosity, important aspects that must be addressed prior to the successful industrial application of the new EURO-GANEX process.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Process for Encapsulating Protein Crystals

A process for growing protein crystals encapsulated within membranes has been invented. This process begins with the encapsulation of a nearly saturated aqueous protein solution inside semipermeable membranes to form microcapsules. The encapsulation is effected by use of special formulations of a dissolved protein and a surfactant in an aqueous first liquid phase, which is placed into contact with a second, immiscible liquid phase that contains one or more polymers that are insoluble in the first phase. The second phase becomes formed into the semipermeable membranes that surround microglobules of the first phase, thereby forming the microcapsules. Once formed, the microcapsules are then dehydrated osmotically by exposure to a concentrated salt or polymer solution. The dehydration forms supersaturated solutions inside the microcapsules, thereby enabling nucleation and growth of protein crystals inside the microcapsules. By suitable formulation of the polymer or salt solution and of other physical and chemical parameters, one can control the rate of transport of water out of the microcapsules through the membranes and thereby create physicochemical conditions that favor the growth, within each microcapsule, of one or a few large crystals suitable for analysis by x-ray diffraction. The membrane polymer can be formulated to consist of low-molecular-weight molecules that do not interfere with the x-ray diffraction analysis of the encapsulated crystals. During dehydration, an electrostatic field can be applied to exert additional control over the rate of dehydration. This protein-crystal-encapsulation process is expected to constitute the basis of protein-growth experiments to be performed on the space shuttle and the International Space Station. As envisioned, the experiments would involve the exposure of immiscible liquids to each other in sequences of steps under microgravitational conditions. The experiments are expected to contribute to knowledge of the precise conditions under which protein crystals form. By enhancing the ability to grow crystals suitable for x-ray diffraction analysis, this knowledge can be expected to benefit not only the space program but also medicine and the pharmaceutical industry.

Morrison, Dennis R.↗

Hybrid Quantum Mechanical/Molecular Mechanics Study of the SN2 Reaction of CH3Cl+OH- in Water

The SN2 mechanism for the reaction of CH3Cl + OH- in aqueous solution was investigated using combined quantum mechanical and molecular mechanics methodology. We analyzed structures of reactant, transition and product states along the reaction pathway. The free energy profile was calculated using the multi-layered representation with the DFT and CCSD(T) level of theory for the quantum-mechanical description of the reactive region. Our results show that the aqueous environment has a significant impact on the reaction process. We find that solvation energy contribution raises the reaction barrier by ~18.9 kcal/mol and the reaction free energy by ~24.5 kcal/mol. The presence of the solvent also induces perturbations in the electronic structure of the solute leading to an increase of 3.5 kcal/mol for the reaction barrier and a decrease of 5.6 kcal/mol for the reaction free energy respectively. Combining the results of two previous calculation results on CHCl3 + OH- and CH2Cl2 + OH- reactions in water, we demonstrate that increase in the chlorination of the methyl group (from CH3Cl to CHCl3) is accompanied by the decrease in the free energy reaction barrier, with the CH3Cl + OH- having the largest barrier among the three reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Redox potential evolution of nitric species and plutonium in HNO{sub 3}-HNO{sub 2} system

In France, the reprocessing process of spent fuel is carried out using the Purex process. The first chemical step of this process is the dissolution of the spent fuel in aqueous concentrated nitric acid. This dissolution solution is composed of many oxidizing species and it is necessary to understand the chemistry of these species to apprehend the behavior of structural materials. The redox potential is a useful discriminate variable to differentiate the effect of each species. In this framework, only the effect of NO{sub 3}{sup -}/HNO{sub 2} couple and PuO{sub 2}{sup 2+}/Pu{sup 4+} couple were investigated. These species were chosen because one is the main couple of medium and the other has a high standard potential. Their influence was investigated from the Nernst's equation. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Multi-scale processes of beech wood disintegration and pretreatment with 1-ethyl-3-methylimidazolium acetate/water mixtures

The valorization of biomass for chemicals and fuels requires efficient pretreatment. One effective strategy involves the pretreatment with ionic liquids which enables enzymatic saccharification of wood within a few hours under mild conditions. This pretreatment strategy is, however, limited by water and the ionic liquids are rather expensive. The scarce understanding of the involved effects, however, challenges the design of alternative pretreatment concepts. This work investigates the multi length-scale effects of pretreatment of wood in 1-ethyl-3-methylimidazolium acetate (EMIMAc) in mixtures with water using spectroscopy, X-ray and neutron scattering. The structure of beech wood is disintegrated in EMIMAc/water mixtures with a water content up to 8.6 wt%. Above 10.7 wt%, the pretreated wood is not disintegrated, but still much better digested enzymatically compared to native wood. In both regimes, component analysis of the solid after pretreatment shows an extraction of few percent of lignin and hemicellulose. In concentrated EMIMAc, xylan is extracted more efficiently and lignin is defunctionalized. Corresponding to the disintegration at macroscopic scale, SANS and XRD show isotropy and a loss of crystallinity in the pretreated wood, but without distinct reflections of type II cellulose. Hence, the microfibril assembly is decrystallized into rather amorphous cellulose within the cell wall. The molecular and structural changes elucidate the processes of wood pretreatment in EMIMAc/water mixtures. In the aqueous regime with >10.7 wt% water in EMIMAc, xyloglucan and lignin moieties are extracted, which leads to coalescence of fibrillary cellulose structures. Dilute EMIMAc/water mixtures thus resemble established aqueous pretreatment concepts. In concentrated EMIMAc, the swelling due to decrystallinization of cellulose, dissolution of cross-linking xylan, and defunctionalization of lignin releases the mechanical stress to result in macroscopic disintegration of cells. The remaining cell wall constituents of lignin and hemicellulose, however, limit a recrystallization of the solvated cellulose. These pretreatment mechanisms are beyond common pretreatment concepts and pave the way for a formulation of mechanistic requirements of pretreatment with simpler pretreatment liquors.

09 BIOMASS FUELS↗

Fate of arsenic during up to 4.5 years of aging of Fe III -As V coprecipitates at acidic pH: Effect of reaction media (Nitrate vs. Sulfate), Fe/As molar ratio, and pH

Iron-arsenate (Fe III -As V ) coprecipitate generated in acid mine drainage and hydrometallurgical practices is one of the potential sources of As contamination in the environment. However, the As behavior as well as the transformation process of the Fe III -As V coprecipitate is still not fully understood under acidic conditions. This work systematically studied the effect of reaction media (sulfate vs. nitrate), Fe/As molar ratios, and acidic pH values on the transformation rates, routes, and products of the Fe III -As V coprecipitates at different temperatures during up to 4.5 years of aging. X-ray diffraction (XRD), transmission electron spectroscopy (TEM), Raman spectroscopy, and extended X-ray absorption fine structure spectroscopy (EXAFS) results showed that the Fe III -As V coprecipitates with Fe/As = 2 transformed to scorodite at pH 4 in both sulfate and nitrate media with poorly crystalline ferric arsenate as precursor. In comparison, for the Fe/As = 4 samples, parascorodite and hematite were formed in sulfate and nitrate media, respectively. We note arsenic was released into the liquid phase during the aging process for the samples with Fe/As = 2 and 4. The aqueous As concentrations ([As] aq ) in sulfate media were larger than those in nitrate media for both the Fe/As = 2 and 4 samples. In addition, the transformation products were goethite and Na-jarosite at Fe/As = 8 and 16, pH 2.5 with the decrease of [As] aq . The results also indicated that 6-line ferrihydrite was a common intermediate for many Fe-As transformation processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nuclear Fuel Reprocessing

Reprocessing is essential to closing nuclear fuel cycle. Natural uranium contains only 0.7 percent 235U, the fissile (see glossary for technical terms) isotope that produces most of the fission energy in a nuclear power plant. Prior to being used in commercial nuclear fuel, uranium is typically enriched to 3–5% in 235U. If the enrichment process discards depleted uranium at 0.2 percent 235U, it takes more than seven tonnes of uranium feed to produce one tonne of 4%-enriched uranium. Nuclear fuel discharged at the end of its economic lifetime contains less one percent 235U, but still more than the natural ore. Less than one percent of the uranium that enters the fuel cycle is actually used in a single pass through the reactor. The other naturally occurring isotope, 238U, directly contributes in a minor way to power generation. However, its main role is to transmute into plutoniumby neutron capture and subsequent radioactive decay of unstable uraniumand neptuniumisotopes. 239Pu and 241Pu are fissile isotopes that produce more than 40% of the fission energy in commercially deployed reactors. It is recovery of the plutonium (and to a lesser extent the uranium) for use in recycled nuclear fuel that has been the primary focus of commercial reprocessing. Uraniumtargets irradiated in special purpose reactors are also reprocessed to obtain the fission product 99Mo, the parent isotope of technetium, which is widely used inmedical procedures. Among the fission products, recovery of such expensive metals as platinum and rhodium is technically achievable, but not economically viable in current market and regulatory conditions. During the past 60 years, many different techniques for reprocessing used nuclear fuel have been proposed and tested in the laboratory. However, commercial reprocessing has been implemented along a single line of aqueous solvent extraction technology called plutonium uranium reduction extraction process (PUREX). Similarly, hundreds of types of reactor fuels have been irradiated for different purposes, but the vast majority of commercial fuel is uranium oxide clad in zirconium alloy tubing. As a result, commercial reprocessing plants have relatively narrow technical requirements for used nuclear that is accepted for processing.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

RARE EARTH ELEMENT IMPACTS ON BIOLOGICAL WASTEWATER TREATMENT

Increasing demand for rare earth elements (REE) is expected to lead to new development and expansion in industries processing and or recycling REE. For some industrial operators, sending aqueous waste streams to a municipal wastewater treatment plant, or publicly owned treatment works (POTW), may be a cost effective disposal option. However, wastewaters that adversely affect the performance of biological wastewater treatment at the POTW will not be accepted. The objective of our research is to assess the effects of wastewaters that might be generated by new rare earth element (REE) beneficiation or recycling processes on biological wastewater treatment systems. We have been investigating the impact of yttrium and europium on the biological activity of activated sludge collected from an operating municipal wastewater treatment plant. We have also examined the effect of an organic complexant that is commonly used in REE extraction and separations; similar compounds may be a component of newly developed REE recycling processes. Our preliminary results indicate that in the presence of Eu, respiration rates for the activated sludge decrease relative to the no-Eu controls, at Eu concentrations ranging from <10 to 660 µM. Yttrium appears to inhibit respiration as well, although negative impacts have been observed only at the highest Y amendment level tested (660 µM). The organic complexant appears to have a negative impact on activated sludge activity as well, although results are variable. Ultimately the intent of this research is to help REE industries to develop environmentally friendly and economically sustainable beneficiation and recycling processes.

54 ENVIRONMENTAL SCIENCES↗

Testing of UV Oxidation Process for Acetonitrile Destruction

The Hanford Site Effluent Treatment Facility (ETF) currently treats aqueous waste streams that include condensates from the 242-A evaporator, leachate from the Environmental Restoration Disposal Facility (ERDF), as well as laboratory wastes and, in the future, will treat liquid effluents from the Hanford Waste Treatment and Immobilization Plant (WTP) and Integrated Disposal Facility (IDF) leachate. Liquid effluents from the WTP will have significant concentrations of acetonitrile. Acetonitrile is formed by reaction of nitrates and sugar in the WTP low activity waste (LAW) melters and is prevalent in the submerged bed scrubber (SBS) and wet electrostatic precipitator (WESP) liquid effluents from WTP off-gas treatment. When these liquids are concentrated in the WTP Effluent Management Facility (EMF) evaporator in the direct feed low activity waste (DFLAW) flow-sheet, testing has shown that the majority of the acetonitrile partitions to the evaporator condensate. Since the evaporator condensate is directed to the ETF, this creates a potential issue with the ETF waste acceptance criteria and, specifically, the ETF Delisting Modification treatability envelope limits. Consequently, there is a need to assess possible mitigation approaches, one of which involves identification and assessment of potential treatment processes to destroy the acetonitrile, which is the subject of the present report.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effects of a modular two-step ozone-water and annealing process on silicon carbide graphene

By combining ozone and water, the effect of exposing epitaxial graphene on silicon carbide to an aggressive wet-chemical process has been evaluated after high temperature annealing in ultra high vacuum. The decomposition of ozone in water produces a number of oxidizing species, however, despite long exposure times to the aqueous-ozone environment, no graphene oxide was observed after the two-step process. The systems were comprehensively characterized before and after processing using Raman spectroscopy, core level photoemission spectroscopy, and angle resolved photoemission spectroscopy together with low energy electron diffraction, low energy electron microscopy, and atomic force microscopy. In spite of the chemical potential of the aqueous-ozone reaction environment, the graphene domains were largely unaffected raising the prospect of employing such simple chemical and annealing protocols to clean or prepare epitaxial graphene surfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Managing Zirconium Chemistry and Phase Compatibility in Combined Process Separations for Minor Actinide Partitioning

In response to the NEUP Program Supporting Fuel Cycle R&D Separations and Waste Forms call DEFOA- 0000799, this report describes the results of an R&D project focusing on streamlining separation processes for advanced fuel cycles. An example of such a process relevant to the U.S. DOE FCR&D program would be one combining the functions of the TRUEX process for partitioning of lanthanides and minor actinides from PUREX(UREX) raffinates with that of the TALSPEAK process for separating transplutonium actinides from fission product lanthanides. A fully-developed PUREX(UREX)/TRUEX/TALSPEAK suite would generate actinides as product(s) for reuse (or transmutation) and fission products as waste. As standalone, consecutive unit-operations, TRUEX and TALSPEAK employ different extractant solutions (solvating (CMPO, octyl(phenyl)-N,Ndiisobutylcarbamoylmethylphosphine oxide) vs. cation exchanging (HDEHP, di-2(ethyl)hexylphosphoric acid) extractants), and distinct aqueous phases (2-4 M HNO 3 vs. concentrated pH 3.5 carboxylic acid buffers containing actinide selective chelating agents). The separate processes may also operate with different phase transfer kinetic constraints. Experience teaches (and it has been demonstrated at the lab scale) that, with proper control, multiple process separation systems can operate successfully. However, it is also recognized that considerable economies of scale could be achieved if multiple operations could be merged into a single process based on a combined extractant solvent. The task of accountability of nuclear materials through the process(es) also becomes more robust with fewer steps, providing that the processes can be accurately modeled. Work is underway in the U.S. and Europe on developing several new options for combined processes (TRUSPEAK, ALSEP, SANEX, GANEX, ExAm are examples). There are unique challenges associated with the operation of such processes, some relating to organic phase chemistry, others arising from the variable composition of the aqueous medium. This project targets in particular two problematic issues in designing combined process systems: managing the chemistry of challenging aqueous species (like Zr 4+ ) and optimizing the composition and properties of combined extractant organic phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A robust ligand exchange approach for preparing hydrophilic, biocompatible photoluminescent quantum dots

Graphical abstract: - Highlights: • Aqueous CdSe/ZnS QDs were prepared using polymaleic anhydrides as capping ligand. • Effect of reaction temperature and time were systematically studied in the synthesis process. • Water-soluble QDs exhibited a good stability in physiological relevant environment. • The aqueous QDs were applied as biological probe to detect human embryonic stem cell. - Abstract: This paper describes a robust ligand exchange approach for preparing biocompatible CdSe/ZnS quantum dots (QDs) to make bioprobe for effective cell imaging. In this method, polymaleic anhydride (PMA) ligand are first used to replace original hydrophobic ligand (oleic acid) and form a protection shell with multiple hydrophilic groups to coat and protect CdSe/ZnS QDs. The as-prepared aqueous QDs exhibit small particle size, good colloidal stability in aqueous solutions with a wide range of pH, salt concentrations and under thermal treatment, which are necessary for biological applications. The use of this new class of aqueous QDs for effective cell imaging shows strong fluorescence signal to human embryonic stem cell, which demonstrate that PMA coated QDs are fully satisfied with the requirements of preparing high quality biological probe.

36 MATERIALS SCIENCE↗

Identification and Characterization of Herbicide Penoxsulam Transformation Products in Aqueous Media by UPLC-QTOF-MS

Photodegradation is an important non-biodegradation process of pesticide degradation in aquatic environments. In this study, the effect of different forms of nitrogen on the photodegradation kinetics of penoxsulam was investigated. The photodegradation of penoxsulam was accelerated by NO{sup 3−} and NO{sup 2−} but was not affected by NH{sup 4+}. Ultra-high-performance liquid chromatography coupled with time-of-flight mass spectrometry was used to separate and identify the transformation products (TPs)converted by photodegradation of penoxsulam in an aqueous solution under UV–Vis (290–800 nm) irradiation. Seven major transformation products were identified based on mass spectral data. The structure was determined by elemental composition calculations, comparison of structural analogs, and existing literature. The main pathways of photodegradation were found to be sulfonamide bond cleavage, rearrangement, triazole ring cleavage, and hydroxylation. These findings are critical to elucidate the environmental fate of penoxsulam in aquatic ecosystems and provide a basis for further environmental risk assessment.

54 ENVIRONMENTAL SCIENCES↗