Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomistic simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Spatially-varying inversion near grain boundaries in MgAl 2 O 4 spinel

Atomistic simulations reveal increased cation inversion at grain boundaries in spinel. As the grain size is reduced, the apparent level of inversion in the material will increase as the grain boundaries become an increasing fraction of the material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Topology induced crossover between Langevin, subdiffusion, and Brownian diffusion regimes in supercooled water

Despite extensive studies of supercooled water, it remains challenging to understand its peculiar dynamic anomalous properties. In this work, we integrated full atomistic simulations of supercooled water over the temperature range of room temperature to 200 K using a quantum-mechanics-based polarizable force field with the dressed dynamics method that couples fast collision events and slow reorganization dynamics of hydrogen-bond networks. Our analysis unveils the salient multiscale features in the transient relaxation dynamics of supercooled water. A classical Langevin behavior dominates at fast timescales, while long-time relaxations unveil two different activation barriers in two temperature regions: below and above 230 K. The modulation of the entropy spectrum by temperature is elucidated in terms of a three-state model underlined by the complexity of the water dynamics associated with a topological transition of a strong hydrogen-bond network. This state-dependent network topology is quantitatively characterized by power-law exponents of inverse network connectivity from 200 to 298 K. Finally, this work provides valuable guidance for further studies on the transient relaxation dynamics of supercooled water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An interplay between a hydrogen atmosphere and dislocation characteristics in BCC Fe from time-averaged molecular dynamics

The interplay between hydrogen and dislocations (e.g., core and elastic energies, and dislocation–dislocation interactions) has implications on hydrogen embrittlement but is poorly understood. Continuum models of hydrogen enhanced local plasticity have not considered the effect of hydrogen on dislocation core energies. Energy minimization atomistic simulations can only resolve dislocation core energies in hydrogen-free systems because hydrogen motion is omitted so hydrogen atmosphere formation can’t occur. Additionally, previous studies focused more on face-centered-cubic than body-centered-cubic metals. Discrete dislocation dynamics studies of hydrogen–dislocation interactions assume isotropic elasticity, but the validity of this assumption isn’t understood. Here, we perform time-averaged molecular dynamics simulations to study the effect of hydrogen on dislocation energies in body-centered-cubic iron for several dislocation character angles. We see atmosphere formation and highly converged dislocation energies. We find that hydrogen reduces dislocation core energies but can increase or decrease elastic energies of isolated dislocations and dislocation–dislocation interaction energies depending on character angle. We also find that isotropic elasticity can be well fitted to dislocation energies obtained from simulations if the isotropic elastic constants are not constrained to their anisotropic counterparts. These results are relevant to ongoing efforts in understanding hydrogen embrittlement and provide a foundation for future work in this field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ZeoNet: 3D convolutional neural networks for predicting adsorption in nanoporous zeolites

Zeolites are one of the most widely used materials in the chemical industry due to their nanometer-sized pores that can adsorb and react upon molecules selectively. With hundreds of known framework topologies and hundreds of thousands of computationally predicted structures, the ability to rapidly predict zeolite performance allows researchers to prioritize their efforts on the most promising structures for a given application. Although the accuracy of forcefield-based atomistic simulations has advanced significantly in the past two decades, these simulations can be computationally expensive, especially for long-chain, complex molecules. Here, we present ZeoNet, a representation learning framework using convolutional neural networks (ConvNets) and 3D volumetric representations for predicting adsorption in zeolites. ZeoNet was trained on the task of predicting Henry's constants for adsorption, k H , of n-octadecane in more than 330 000 known and predicted zeolite materials. Employing a 3D grid based on the distances to solvent-accessible surfaces, a volumetric representation that can be generated efficiently, the best-performing ZeoNet achieved a correlation coefficient r 2 = 0.977 and a mean-squared error MSE = 3.8 in ln k H , which corresponds to an error of 9.3 kJ mol -1 in adsorption free energy. In comparison, a model based on hand-designed geometric features has values of r 2 = 0.783 and MSE = 35.7. ZeoNet is also relatively efficient and can process ≈8 structures per second on an Nvidia RTX 2080TI GPU, orders of magnitude faster than forcefield-based simulations. A systematic analysis was conducted to investigate how the choice of ConvNet architectures, the linear dimension (L) and spatial resolution (Δd) of the distance grids, batch size, optimizer, and learning rate impact the model performance. We found that ConvNets based on the ResNet architecture offer the best tradeoff between expressiveness and efficiency. The performance for all models reaches a plateau at L = 30–45 Å and depends less sensitively on grid resolution, with a small benefit around Δd = 0.30–0.45 Å. Finally, saliency maps were visualized to identify which regions of the materials contributed the most to model predictions. It was found, interestingly, that the predictions are driven primarily by the accessible pore volume rather than the region occupied by the framework atoms.

36 MATERIALS SCIENCE↗

Structure and mechanical properties of grain boundaries in molybdenum disulfide (MoS 2 )

Molybdenum disulfide (MoS 2 ) is a two-dimensional material widely used as a lubricant in many applications involving mechanical loading under a wide range of operating temperatures. Since many synthesis and processing techniques yield MoS 2 in its polycrystalline form, establishing grain boundary (GB) structure–property relations is key to designing MoS 2 microstructures with tailored properties. Here, we employ classical, reactive atomistic simulations to investigate the structure and mechanical behavior of a wide range of GBs in MoS 2 as a function of temperature. Using a bicrystal MoS 2 geometry, we characterize the atomic structure and calculate the energy of several low-angle GBs. Then, we simulate the tensile deformation behavior of MoS 2 bicrystals at several temperatures. Our results reveal that at temperatures above 100 K, the deformation of MoS 2 bicrystals is characterized by the nucleation of shear bands from GBs that grow, with subsequent loading, into the MoS 2 crystals. At low temperatures, the tensile deformation is characterized by the nucleation and propagation of deformation fronts, resulting in altered bond angles and bond lengths. Quantitative analysis reveals a decrease in the ultimate tensile stress and ultimate failure strain of MoS 2 bicrystals with the increase in temperature. Furthermore, our simulations of the mechanical behavior of metastable GBs reveal that the strength and ductility decrease with the increase in energy of these boundary structures. In broad terms, our work provides future avenues to employ GB engineering as a strategy to tailor the properties of MoS 2 microstructures.

Moore, Robert D. [Lehigh Univ., Bethlehem, PA (Uni↗

Medium-range icosahedral order in quasicrystal-forming Zr{sub 2}Pd binary metallic glass

Medium-range order in Zr{sub 2}Pd metallic glass was studied using a combination of x-ray diffraction experiment and atomistic simulations. We show that, in contrast to earlier experimental interpretations, the icosahedral-like polyhedron is centered around Pd, rather than Zr. Furthermore, we find that the ordered icosahedral packing around Pd extends to the third shell in the way similar to that in the Bergman-type clusters. The existence of Bergman-type clusters sheds interesting light into the formation of nanoquasicrystal phase during crystallization process of Zr{sub 2}Pd metallic glass.

36 MATERIALS SCIENCE↗

On the characteristic length scales associated with plastic deformation in metallic glasses

Atomistic simulations revealed that the spatial correlations of plastic displacements in three metallic glasses, FeP, MgAl, and CuZr, follow an exponential law with a characteristic length scale l{sub c} that governs Poisson's ratio {nu}, shear band thickness t{sub SB}, and fracture mode in these materials. Among the three glasses, FeP exhibits smallest l{sub c}, thinnest t{sub SB}, lowest {nu}, and brittle fracture; CuZr exhibits largest l{sub c}, thickest t{sub SB}, highest {nu}, and ductile fracture, while properties of MgAl lie in between those of FeP and CuZr. These findings corroborate well with existing experimental observations and suggest l{sub c} as a fundamental measure of the shear transformation zone size in metallic glasses.

36 MATERIALS SCIENCE↗

Effects of defect clustering on optical properties of GaN by single and molecular ion irradiation

The effects of irradiation by F, P, and PF{sub 4} on optical properties of GaN were studied experimentally and by atomistic simulations. Additionally, the effect of Ag was studied by simulation. The irradiation energy was 0.6 keV/amu for all projectiles. The measured photoluminescence (PL) decay time was found to be decreasing faster when irradiation was done by molecular ion compared to light ion irradiation. The PL decay time change is connected with the types of defect produced by different projectiles. Simulation results show that the light ions mainly produce isolated point defects while molecular and heavy ions produce clusters of point defects. The total amount of defects produced by the PF{sub 4} projectile was found to be very close to the sum of all defects produced in five individual cascades started by one P and four F single ions. This and the similar depth profiles of damage produced by molecular and light ion irradiations suggest that the defect clusters are one of the important reasons for fast PL decay. Moreover, the simulations of irradiation by Ag ions, whose mass is close to the mass of the PF{sub 4} molecule, showed that the produced defects are clustering in even bigger conglomerates compared to PF{sub 4} case. The latter has a tendency to split in the pre-surface region, reducing on average the density of the collision cascade.

36 MATERIALS SCIENCE↗

Exceptional ion rejection ability of directional solvent for non-membrane desalination

The recently demonstrated directional solvent extraction (DSE) is promising for very low temperature, membrane-free water desalination. In this paper, we combine atomistic simulations and experimental validation to demonstrate that the currently used directional solvent, decanoic acid, can reject all major salt ions in seawater, with very high rejection rates. The salinities of the DSE recovered water show that ion rejection rates are ∼98%–99%—similar to those of the best reverse osmosis membranes. Our test also shows that the DSE process can desalt seawater to produce fresh water that meets drinking water standards.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computational study of heterojunction graphene nanoribbon tunneling transistors with p-d orbital tight-binding method

The graphene nanoribbon (GNR) tunneling field effect transistor (TFET) has been a promising candidate for a future low power logic device due to its sub-60 mV/dec subthreshold characteristic and its superior gate control on the channel electrons due to its one-dimensional nature. Even though many theoretical studies have been carried out, it is not clear that GNR TFETs would outperform conventional silicon metal oxide semiconductor field effect transistors (MOSFETs). With rigorous atomistic simulations using the p/d orbital tight-binding model, this study focuses on the optimization of GNR TFETs by tuning the doping density and the size of GNRs. It is found that the optimized GNR TFET can operate at a half of the supply voltage of silicon nanowire MOSFETs in the ballistic limit. However, a study on the effects of edge roughness on the performance of the optimized GNR TFET structure reveals that experimentally feasible edge roughness can deteriorates the on-current performance if the off-current is normalized with the low power requirement specified in the international technology roadmap for semiconductors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A novel method for calculating the energy barriers for carbon diffusion in ferrite under heterogeneous stress

A novel method for accurate and efficient evaluation of the change in energy barriers for carbon diffusion in ferrite under heterogeneous stress is introduced. This method, called Linear Combination of Stress States, is based on the knowledge of the effects of simple stresses (uniaxial or shear) on these diffusion barriers. Then, it is assumed that the change in energy barriers under a complex stress can be expressed as a linear combination of these already known simple stress effects. The modifications of energy barriers by either uniaxial traction/compression and shear stress are determined by means of atomistic simulations with the Climbing Image-Nudge Elastic Band method and are stored as a set of functions. The results of this method are compared to the predictions of anisotropic elasticity theory. It is shown that, linear anisotropic elasticity fails to predict the correct energy barrier variation with stress (especially with shear stress) whereas the proposed method provides correct energy barrier variation for stresses up to ∼3 GPa. This study provides a basis for the development of multiscale models of diffusion under non-uniform stress.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Universal tight binding model for chemical reactions in solution and at surfaces. III. Stoichiometric and reduced surfaces of titania and the adsorption of water

We demonstrate a model for stoichiometric and reduced titanium dioxide intended for use in molecular dynamics and other atomistic simulations and based in the polarizable ion tight binding theory. This extends the model introduced in two previous papers from molecular and liquid applications into the solid state, thus completing the task of providing a comprehensive and unified scheme for studying chemical reactions, particularly aimed at problems in catalysis and electrochemistry. As before, experimental results are given priority over theoretical ones in selecting targets for model fitting, for which we used crystal parameters and band gaps of titania bulk polymorphs, rutile and anatase. The model is applied to six low index titania surfaces, with and without oxygen vacancies and adsorbed water molecules, both in dissociated and non-dissociated states. Finally, we present the results of molecular dynamics simulation of an anatase cluster with a number of adsorbed water molecules and discuss the role of edge and corner atoms of the cluster.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ablation enhancement of silicon by ultrashort double-pulse laser ablation

In this study, the ultrashort double-pulse ablation of silicon is investigated. An atomistic simulation model is developed to analyze the underlying physics. It is revealed that the double-pulse ablation could significantly increase the ablation rate of silicon, compared with the single pulse ablation with the same total pulse energy, which is totally different from the case of metals. In the long pulse delay range (over 1 ps), the enhancement is caused by the metallic transition of melted silicon with the corresponding absorption efficiency. At ultrashort pulse delay (below 1 ps), the enhancement is due to the electron excitation by the first pulse. The enhancement only occurs at low and moderate laser fluence. The ablation is suppressed at high fluence due to the strong plasma shielding effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Statistics of dislocation pinning at localized obstacles

Pinning of dislocations at nanosized obstacles like precipitates, voids, and bubbles is a crucial mechanism in the context of phenomena like hardening and creep. The interaction between such an obstacle and a dislocation is often studied at fundamental level by means of analytical tools, atomistic simulations, and finite element methods. Nevertheless, the information extracted from such studies cannot be utilized to its maximum extent on account of insufficient information about the underlying statistics of this process comprising a large number of dislocations and obstacles in a system. Here, we propose a new statistical approach, where the statistics of pinning of dislocations by idealized spherical obstacles is explored by taking into account the generalized size-distribution of the obstacles along with the dislocation density within a three-dimensional framework. Starting with a minimal set of material parameters, the framework employs the method of geometrical statistics with a few simple assumptions compatible with the real physical scenario. The application of this approach, in combination with the knowledge of fundamental dislocation-obstacle interactions, has successfully been demonstrated for dislocation pinning at nanovoids in neutron irradiated type 316-stainless steel in regard to the non-conservative motion of dislocations. An interesting phenomenon of transition from rare pinning to multiple pinning regimes with increasing irradiation temperature is revealed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Recognizing molecular patterns by machine learning: An agnostic structural definition of the hydrogen bond

The concept of chemical bonding can ultimately be seen as a rationalization of the recurring structural patterns observed in molecules and solids. Chemical intuition is nothing but the ability to recognize and predict such patterns, and how they transform into one another. Here, we discuss how to use a computer to identify atomic patterns automatically, so as to provide an algorithmic definition of a bond based solely on structural information. We concentrate in particular on hydrogen bonding – a central concept to our understanding of the physical chemistry of water, biological systems, and many technologically important materials. Since the hydrogen bond is a somewhat fuzzy entity that covers a broad range of energies and distances, many different criteria have been proposed and used over the years, based either on sophisticate electronic structure calculations followed by an energy decomposition analysis, or on somewhat arbitrary choices of a range of structural parameters that is deemed to correspond to a hydrogen-bonded configuration. We introduce here a definition that is univocal, unbiased, and adaptive, based on our machine-learning analysis of an atomistic simulation. The strategy we propose could be easily adapted to similar scenarios, where one has to recognize or classify structural patterns in a material or chemical compound.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stiffness and strength of oxygen-functionalized graphene with vacancies

The 2D elastic modulus (E{sup 2D}) and strength (σ{sup 2D}) of defective graphene sheets containing vacancies, epoxide, and hydroxyl functional groups are evaluated at 300 K by atomistic simulations. The fraction of vacancies is controlled in the range 0% to 5%, while the density of functional groups corresponds to O:C ratios in the range 0% to 25%. In-plane modulus and strength diagrams as functions of vacancy and functional group densities are generated using models with a single type of defect and with combinations of two types of defects (vacancies and functional groups). It is observed that in models containing only vacancies, the rate at which strength decreases with increasing the concentration of defects is largest, followed by models containing only epoxide groups and those with only hydroxyl groups. The effect on modulus of vacancies and epoxides present alone in the model is similar, and much stronger than that of hydroxyl groups. When the concentration of defects is large, the combined effect of the functional groups and vacancies cannot be obtained as the superposition of individual effects of the two types of defects. The elastic modulus deteriorates faster (slower) than predicted by superposition in systems containing vacancies and hydroxyl groups (vacancies and epoxide groups)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗