OLED Lighting Substrate and Encapsulation System for Breakthrough Cost Reductions
OLED lighting is predicted to contribute a significant part of the US energy savings that will result from the implementation of Solid-State Lighting (SSL). OLED lighting adoption is predicted to reach approximately 5% of the lighting market by 2020. The primary purpose of this study was to address a barrier in OLED lighting adoption, this being OLED production costs. This project enabled the elimination of the anode patterning steps, by physically insulating the cathode contact area from the blanket coated ITO anode. Furthermore, this technology eliminates the need to change shadow masks between the organic materials and the cathode, making the OLED deposition machines simpler, lower cost, and less prone to particle generation. Finally, the process developed here permits the creation of a perfectly hermetic seal thereby eliminating the cost of desiccant materials. In this project, we successfully developed an ultrasonic soldering process to create a perfectly hermetic metal-on-glass bond. This required the evaluation of many ultrasonic solder materials, soldering parameters, and solder hardware configurations. In addition, methods to evaluate the hermeticity of the solder seal were developed and successfully tested. Our work demonstrated the ability to make a hermetic solder seal between a device glass and a cover glass using a Cerasolzer 155 ultrasonic solder. The resulting process could be leveraged to almost any OLED configuration. As we did not have the opportunity to produce a significant quantity of OLED devices for environmental testing, hermeticity was verified by measuring helium leakage rates through the seal. A second facet of this project required the development of a patterned glass frit insulating barrier over surface of the anode. To accomplish this, the appropriate insulator formulation and geometry needed to be established. In addition, this insulator needed to be robust enough to hold up to the ultrasonic soldering process previously mentioned. Given the aggressive nature of the ultrasonic soldering process, it was a significant challenge to develop an insulator which would withstand the resulting solder cavitation. The frit material and firing process turned out to be quite expensive and time consuming which was a major contributor to the higher than anticipated cost of this technology. In the end, it was found that a Vanadium Phosphate glass frit provided the most reliable insulator over the ITO.