Search NASA⌕ Search

SEARCH · Search NASA

Results for “coded computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

An application of interactive computer graphics technology to the design of dispersal mechanisms

Interactive computer graphics technology is combined with a general purpose mechanisms computer code to study the operational behavior of three guided bomb dispersal mechanism designs. These studies illustrate the use of computer graphics techniques to discover operational anomalies, to assess the effectiveness of design improvements, to reduce the time and cost of the modeling effort, and to provide the mechanism designer with a visual understanding of the physical operation of such systems.

Richter, B. J.↗
NASA NTRS1982

A Piecewise Linear State Variable Technique for Real Time Propulsion System Simulation

The emphasis on increased aircraft and propulsion control system integration and piloted simulation has created a need for higher fidelity real time dynamic propulsion models. A real time propulsion system modeling technique which satisfies this need and which provides the capabilities needed to evaluate propulsion system performance and aircraft system interaction on manned flight simulators was developed and demonstrated using flight simulator facilities at NASA Ames. A piecewise linear state variable technique is used. This technique provides the system accuracy, stability and transient response required for integrated aircraft and propulsion control system studies. The real time dynamic model includes the detail and flexibility required for the evaluation of critical control parameters and propulsion component limits over a limited flight envelope. The model contains approximately 7.0 K bytes of in-line computational code and 14.7 K of block data. It has an 8.9 ms cycle time on a Xerox Sigma 9 computer. A Pegasus-Harrier propulsion system was used as a baseline for developing the mathematical modeling and simulation technique. A hydromechanical and water injection control system was also simulated. The model was programmed for interfacing with a Harrier aircraft simulation at NASA Ames. Descriptions of the real time methodology and model capabilities are presented.

Mihaloew, J. R.↗
NASA NTRS1982

A piecewise linear state variable technique for real time propulsion system simulation

The emphasis on increased aircraft and propulsion control system integration and piloted simulation has created a need for higher fidelity real time dynamic propulsion models. A real time propulsion system modeling technique which satisfies this need and which provides the capabilities needed to evaluate propulsion system performance and aircraft system interaction on manned flight simulators was developed and demonstrated using flight simulator facilities at NASA Ames. A piecewise linear state variable technique is used. This technique provides the system accuracy, stability and transient response required for integrated aircraft and propulsion control system studies. The real time dynamic model includes the detail and flexibility required for the evaluation of critical control parameters and propulsion component limits over a limited flight envelope. The model contains approximately 7.0 K bytes of in-line computational code and 14.7 K of block data. It has an 8.9 ms cycle time on a Xerox Sigma 9 computer. A Pegasus-Harrier propulsion system was used as a baseline for developing the mathematical modeling and simulation technique. A hydromechanical and water injection control system was also simulated. The model was programmed for interfacing with a Harrier aircraft simulation at NASA Ames. Descriptions of the real time methodology and model capabilities are presented.

Mihaloew, J. R.↗
NASA NTRS1987

Integration of topographic data with synthetic aperture radar data for determining forest properties in mountainous terrain

The elevation gradients affecting tropical forest stand characteristics are presently studied in light of multipolarization airborne SAR data. A 'rubber sheeting' computer code was used to georeference the SAR data sets to the digital elevation data. The TOPO code from NASA's NSTL generated the terrain slope and aspect angle data from the terrain elevation data set; computed local incidence angles were used to delete those data areas that were shadowed, and to produce local incidence angle data that were not shadowed. The results obtained demonstrate that the SAR data are related to the elevation gradient.

Wu, Shih-Tseng↗
NASA NTRS1989

Asymptotic/numerical analysis of supersonic propeller noise

An asymptotic analysis based on the Mach surface structure of the field of a supersonic helical source distribution is applied to predict thickness and loading noise radiated by high speed propeller blades. The theory utilizes an integral representation of the Ffowcs-Williams Hawkings equation in a fully linearized form. The asymptotic results are used for chordwise strips of the blade, while required spanwise integrations are performed numerically. The form of the analysis enables predicted waveforms to be interpreted in terms of Mach surface propagation. A computer code developed to implement the theory is described and found to yield results in close agreement with more exact computations.

Myers, M. K.↗
NASA NTRS1989

Recent advances in Runge-Kutta schemes for solving 3-D Navier-Stokes equations

A thin-layer Navier-Stokes has been developed for solving high Reynolds number, turbulent flows past aircraft components under transonic flow conditions. The computer code has been validated through data comparisons for flow past isolated wings, wing-body configurations, prolate spheroids and wings mounted inside wind-tunnels. The basic code employs an explicit Runge-Kutta time-stepping scheme to obtain steady state solution to the unsteady governing equations. Significant gain in the efficiency of the code has been obtained by implementing a multigrid acceleration technique to achieve steady-state solutions. The improved efficiency of the code has made it feasible to conduct grid-refinement and turbulence model studies in a reasonable amount of computer time. The non-equilibrium turbulence model of Johnson and King has been extended to three-dimensional flows and excellent agreement with pressure data has been obtained for transonic separated flow over a transport type of wing.

Vatsa, Veer N.↗
NASA NTRS1991

Effect of non-equilibrium flow chemistry and surface catalysis on surface heating to AFE

The effect of nonequilibrium flow chemistry on the surface temperature distribution over the forebody heat shield on the Aeroassisted Flight Experiment (AFE) vehicle was investigated using a reacting boundary-layer code. Computations were performed by using boundary-layer-edge properties determined from global iterations between the boundary-layer code and flow field solutions from a viscous shock layer (VSL) and a full Navier-Stokes solution. Surface temperature distribution over the AFE heat shield was calculated for two flight conditions during a nominal AFE trajectory. This study indicates that the surface temperature distribution is sensitive to the nonequilibrium chemistry in the shock layer. Heating distributions over the AFE forebody calculated using nonequilibrium edge properties were similar to values calculated using the VSL program.

Stewart, David A.↗
NASA NTRS1993

Computing Flow Transition On Parallel Processors

Parallel algorithm developed on multiple-microprocessor computer. Program initiated to develop computer codes capable of directly simulating and mathematically modeling transition process at mach numbers ranging from subsonic to hypersonic. Parallel computers potentially offer reduction of processing time; processing time inversely proportional to number of available processors.

Bokhari, S.↗
NASA NTRS1993

Burnett solutions along the stagnation line of a cooled cylinder in low-density hypersonic flows

The Burnett equations in the cylindrical coordinate system have been applied to the hypersonic flow over a cylinder in low density environments. Through a local similarity transformation, the Burnett equations are degenerated into nonlinear third-order ordinary differential equations which are only valid along the stagnation line. These equations are solved by the multi-staged Runge-Kutta integration technique. Steady state solutions are asymptotically reached by the time-marching procedure. A newly-developed computer code is used to solve both the Navier-Stokes and the Burnett equations within the shock layer. The computed heat transfer coefficients are consistent with wind-tunnel and STS flight data. Comparisons with the DSMC solutions and the Boltzmann solutions show that the Burnett equations are more appropriate as the governing equations than the Navier-Stokes equations in the transitional flow regime.

Liaw, G. S.↗
NASA NTRS1994

Computing Flows Of Coolants In Turbomachines

Coolant Passage Flow (CPF) computer code developed to predict accurately coolant flow and heat transfer inside turbomachinery cooling passages (either radial or axial blading). Computes flow in one-inlet/one-outlet passage of any shape. Calculates rate of flow of coolant, temperature, pressure, velocity, and heat-transfer coefficients along passage. Integrates one-dimensional momentum and energy equations along defined flow path, taking into account change in area, addition or subtraction of mass, pumping, friction, and transfer of heat. Written in FORTRAN IV.

Meitner, P. L.↗
NASA NTRS1995

Calibration and Application of Plume Radiation Code: PARRAD

The next generation of Reusable Launch Vehicle (RLV) design requires careful considerations towards Thermal Protection System (TPS) not only in the high-heating regions, also in the base region. The use of hydrocarbon based liquid propulsion engine and the construction, launch and operational cost limitations places a significant burden on the base region TPS design. The radiation from the rocket-plume is expected to dominate base heating during ascent. The objective of this paper is to evaluate the accuracy of a plume radiation modeling with the PARRAD code. The original PARRAD code has been modified to work with single and multiple /overset grids and plume-field solution generated by computational codes, such as GASP. These modifications will be detailed in the proposed paper. To establish accuracy, simulations of the Space Shuttle Main Engine nozzle were performed and the radiative heating predicted by PARRAD are compared with ground based measurements. These results and pertinent discussion of issues related to accuracy will be detailed. In addition, predictions for the X-34 RLV, yet to be performed, will be presented and the significance (or lack) of base heating due to plume radiation will be discussed.

Venkatapathy, Ethiraj↗
NASA NTRS1987

Lewis inverse design code (LINDES): Users manual

The method of complex characteristics and hodograph transformation for the design of shockless airfoils was introduced by Bauer, Garabedian, and Korn and has been extended by the author to design subcritical and supercritical cascades with high solidities and large inlet angles. This new capability was achieved by introducing a new conformal mapping of the hodograph domain onto an ellipse and expanding the solution in terms of Chebyshev polynomials. A new computer code, the NASA Lewis inverse design code, was developed based on this idea. This new design code is an efficient method for the design of airfoils in cascade. In particular, the design of subcritical cascades of airfoils is a very fast, robust, and versatile process. The inverse design code can be made to interact with a turbulent boundary layer calculation to obtain airfoils with no separated flows at the design condition. This report is intended to serve as a users manual for this design code. Material previously reported by the author is included here for completeness and quick access to the user. The manual contains a description of the method followed by a discussion of the design procedure and examples. The input parameters necessary to run the code are then described and their default values given. Output listings corresponding to six different blade shapes designed with the code are given, as well as the necessary input data to reproduce the computer runs. The examples have been chosen to show that a wide range of applications can be covered with the code, ranging from supercritical propeller sections to wind tunnel turning vanes that can operate with a large inlet flow angle range.

Sanz, Jose M.↗
NASA NTRS1978

End-wall boundary layer prediction for axial compressors

An integral boundary layer procedure was developed for the computation of viscous and secondary flows along the annulus walls of an axial compressor. The procedure is an outgrowth and extension of the pitch-averaged methods of Mellor and Horlock. In the present work secondary flow theory is used to develop approximations for the velocity profiles inside a rotating blade row and for the blade force deficit terms in the momentum integral equations. The computer code based on this procedure was iteratively coupled to a quasi-one-dimensional model for the external inviscid flow. Computed results are compared with measurements in a compressor cascade.

Sockol, P. M.↗
NASA NTRS1980

'GAIM' - Gas-addition, impedance-matched arc driver

A conceptual view for a GAIM energy/driver system to maximize shock-tube performance through efficient interfacing of the energy source with the gas dynamics of the arc driver is presented. Electrical and arc-chamber requirements are evaluated utilizing two new computer codes. One code calculates the shock wave generated for a selected time rate and magnitude of arc-energy input; the other computes the values of external circuit elements required to produce the selected energy input, with the driver represented as the load element of the electrical discharge circuit. Results indicate that the energy-storage capability and the driver arrangement needed to produce the highest shock Mach number can be achieved by means of driver gas addition and by impedance matching (GAIM). Design criteria are presented for arc energy requirements necessary to produce given shock-wave speeds. Shock velocities as high as the 70 km/sec required for simulating Jovian entry now seem possible in shock-tube operation. Practical implementation of a GAIM system is discussed.

Dannenberg, R. E.↗
NASA NTRS1998

Multiphysics Code Demonstrated for Propulsion Applications

The utility of multidisciplinary analysis tools for aeropropulsion applications is being investigated at the NASA Lewis Research Center. The goal of this project is to apply Spectrum, a multiphysics code developed by Centric Engineering Systems, Inc., to simulate multidisciplinary effects in turbomachinery components. Many engineering problems today involve detailed computer analyses to predict the thermal, aerodynamic, and structural response of a mechanical system as it undergoes service loading. Analysis of aerospace structures generally requires attention in all three disciplinary areas to adequately predict component service behavior, and in many cases, the results from one discipline substantially affect the outcome of the other two. There are numerous computer codes currently available in the engineering community to perform such analyses in each of these disciplines. Many of these codes are developed and used in-house by a given organization, and many are commercially available. However, few, if any, of these codes are designed specifically for multidisciplinary analyses. The Spectrum code has been developed for performing fully coupled fluid, thermal, and structural analyses on a mechanical system with a single simulation that accounts for all simultaneous interactions, thus eliminating the requirement for running a large number of sequential, separate, disciplinary analyses. The Spectrum code has a true multiphysics analysis capability, which improves analysis efficiency as well as accuracy. Centric Engineering, Inc., working with a team of Lewis and AlliedSignal Engines engineers, has been evaluating Spectrum for a variety of propulsion applications including disk quenching, drum cavity flow, aeromechanical simulations, and a centrifugal compressor flow simulation.

Lawrence, Charles↗
NASA NTRS1999

Parallelizing OVERFLOW: Experiences, Lessons, Results

The computer code OVERFLOW is widely used in the aerodynamic community for the numerical solution of the Navier-Stokes equations. Current trends in computer systems and architectures are toward multiple processors and parallelism, including distributed memory. This report describes work that has been carried out by the author and others at Ames Research Center with the goal of parallelizing OVERFLOW using a variety of parallel architectures and parallelization strategies. This paper begins with a brief description of the OVERFLOW code. This description includes the basic numerical algorithm and some software engineering considerations. Next comes a description of a parallel version of OVERFLOW, OVERFLOW/PVM, using PVM (Parallel Virtual Machine). This parallel version of OVERFLOW uses the manager/worker style and is part of the standard OVERFLOW distribution. Then comes a description of a parallel version of OVERFLOW, OVERFLOW/MPI, using MPI (Message Passing Interface). This parallel version of OVERFLOW uses the SPMD (Single Program Multiple Data) style. Finally comes a discussion of alternatives to explicit message-passing in the context of parallelizing OVERFLOW.

Jespersen, Dennis C.↗
NASA NTRS1983

Wall-function boundary conditions in the solution of the Navier-Stokes equations for complex compressible flows

To make computer codes for two-dimensional compressible flows more robust and economical, wall functions for these flows, under adiabatic conditions, have been developed and tested. These wall functions have been applied to three two-equation models of turbulence. The tests consist of comparisons of calculated and experimental results for transonic and supersonic flow over a flat plate and for two-dimensional and axisymmetrical transonic shock-wave/boundary-layer interaction flows with and without separation. The calculations are performed with an implicit algorithm that solves the Reynolds-averaged Navier-Stokes equations. It is shown that results obtained agree very well with the data for the complex compressible flows tested, provided criteria for use of the wall functions are followed. The expected savings in cost of the computations and improved robustness of the code were achieved.

Viegas, J. R.↗
NASA NTRS2000

Verification and Validation Data for Computational Unsteady Aerodynamics

Computational Unsteady Aerodynamics computer codes are being increasingly used. In order to validate their results they must be tested against valid experimental data. The present report aims at collecting reliable experimental data on unsteady aerodynamics and presenting them in a form which permits use for verification of codes. For ease of handling, the data are also presented in machine readable form (CD-ROM). Data on increasingly complex generic forms were selected and the following categories are covered: flutter, buffet, stability and control, dynamic stall, cavity flows, store separation. Computational solutions are included in order to permit evaluation of codes and analysis of solutions which differ from experimental data.

Applied Vehicle Technology Panel (AVT)Task Group↗