Search NASA⌕ Search

SEARCH · Search NASA

Results for “data reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Investigation of otolith responses using ground based vestibular research facility

The general goal was to examine tilt sensitivity of horizontal semicircular canal afferents. Computer programs were tested which controlled the short axis centrifuge at the Vestibular Research Facility, acquired action potentials and produced data reduction analyses including histograms and gain and phase calculations. A pre-amplifier was also developed for the acquisition of action potentials. The data were gathered that can be used to contribute toward the understanding of the tilt sensitivity of semicircular canal afferents in the unanesthetized gerbil preparation.

Correia, Manning J.↗

Deimos: A reddish, D-type asteroid spectrum

We have obtained high quality CCD spectra of Deimos from 0.5 to 1.0 microns at a spectral resolution of 15 A. The spectra are remarkably red, similar to the spectra of D type asteroids rather than those of carbonaceous chondrites or C type asteroids. During the 1988 opposition of Mars, we obtained new CCD spectra of its outer satellite, Deimos. The data were obtained over a 2 1/2 hour period on the night of 9 Oct., using the 1.54 meter Catalina telescope and the LPL long-slit CCD spectrometer. From 0.5 to 1.1 microns, the spectrum is dispersed across an 800 x 800 Texas Instruments CCD chip at a scale of 7.21 A per pixel for an effective lambda/delta(lambda) approximately equals 500. The primary observational difficulty in ground based spectroscopy of Deimos was its proximity to Mars. To minimize scattered light from Mars, Deimos was observed near greatest elongation. The spectrograph slit was narrowed to 2.5 arcseconds, slightly larger than the seeing disk. An apodizing mask at the re-imaged telescope primary, to remove the diffraction cross of Mars light caused by the telescope's secondary mirror mount. Residual scattered light was modeled and removed in data reduction. Solar analog stars BS560, BS2007, and BS8931 were observed to allow removal of telluric absorptions. The resulting spectrum is plotted with other data.

Grundy, William M.↗

ADDRAS - An integrated systems approach

NASA-Langley's Acoustics Division Data Reduction and Analysis System (ADDRAS) computes far-field noise spectral estimates on the basis of weather, aircraft state and position, and acoustic data sets. The structure and function of ADDRAS has been primarily determined by rotorcraft flyover test design, data acquisition, and data flow criteria. The RIM relational database management software is used to organize all noise test data for ADDRAS.

Becker, Lawrence E.↗

Mars Exploration Rover airbag landing loads testing and analsysis

This paper presents a summary of the testing and analysis used to quantify the expected airbag landing loads for the Mars Exploration Rovers. The airbag drop test setup, lander instrumentation, and the test data reduction method are discussed in order to provide an understanding of the empirical loads. A set of limiting cases that bound the empirical data are developed for use in finite element modeling of the lander and rover models.

modeling↗

Space Probes Program Status Report

Brief of Progress: A. Preparations for the 26 November launching of ABLE-4 ATLAS are proceeding as scheduled, with no problems apparent at this time. Many of the electrical tests and subsystems checks have been completed. Minor modifications have been made to the solar paddle tie-down and release mechanism, after an extensive testing program; B. Work toward the 10 December launching of ABLE-4 THOR is also progressing on schedule. Subsystem checks have been started, and mechanical fit checks have been completed; C. During the month of October, a total of 136 tests were performed on components and assemblies related to the ABLE program. These included acceptance tests, type tests, R&D tests, etc. Of this total, only three failures occurred, all of which have been corrected; D. The Space Physics Data Library, Los Angeles, California, is now in operation. Data reduction gear in the Library is in breadboard operation with completion of the installation expected by mid-November. Analysis of ABLE-3 data is progressing satisfactorily at the Library.

Source record↗

JRC-IRMM/ORNL Collaboration on Nuclear Data for Nuclear Criticality Safety - 14486

Concerns about using cross sections recommended in the main evaluated data libraries (i.e. ENDF/B, JEFF and JENDL) for nuclear criticality calculations have been a prime motivator for new cross section measurements. The measurements and evaluations discussed in this work are part of a collaboration between the Oak Ridge National Laboratory (ORNL) and the Institute for Reference Material and Measurements of the Joint Research Center (JRC-IRMM) of the European Commission (EC). They are performed in response to the US Nuclear Criticality Safety Program (NCSP) data needs. In particular, the NCSP five-year plan encompasses a listing of elements that have been identified for measurements and evaluations to address issues on criticality safety applications. This listing is based on data deficiency concerns in practical applications that are conveyed by criticality safety practitioners. In general these deficiencies are obtained through the analysis of benchmark calculations. A wealth of evaluations in the main libraries were derived from results of measurements made with poor time-of-flight resolution, and also the description of some data in the neutron energy range above several tens of keV is crude. This impacts both the resolved and unresolved resonance region, and leads to bias effects when resonance structures play an important role. As a consequence only average corrections can be applied in calculations for nuclear criticality calculations where self-shielding, multiple scattering, or Doppler broadening are important. This can lead to erroneous results. Furthermore, many evaluations for nuclides having small neutron-capture cross sections show erroneously high cross sections because the influence of the neutron sensitivity of the old measurement systems was underestimated. Although their neutron capture cross sections are small, these nuclides, if occurring in large amounts, can be important absorbers in criticality calculations, so an accurate determination of these cross sections is required. Over the last seven years the JRC-IRMM/ORNL collaboration has produced many neutron induced cross section data using the Geel Electron Linear Accelerator (GELINA) neutron time-of-flight facility. This facility is ideally suited to measure total, fission and capture cross sections in the energy range from 1 eV to ∼600 keV, which is important for nuclear criticality calculations. In this paper the facility and experimental set-ups at GELINA will be described together with the data reduction and analysis procedures which result in experimental observables including their full covariance information. The importance of combining transmission and partial cross section data will be emphasized. We will give a list of the measured nuclides and discuss the impact of the resulting data and evaluations. (authors)

42 ENGINEERING↗

FITTING THE UNION2.1 SUPERNOVA SAMPLE WITH THE R{sub h} = ct UNIVERSE

The analysis of Type Ia supernova data over the past decade has been a notable success story in cosmology. These standard candles offer us an unparalleled opportunity to study the cosmological expansion out to a redshift of {approx}1.5. The consensus today appears to be that {Lambda}CDM offers the best explanation for the luminosity-distance relationship seen in these events. However, a significant incompatibility is now emerging between the standard model and other equally important observations, such as those of the cosmic microwave background. {Lambda}CDM does not provide an accurate representation of the cosmological expansion at high redshifts (z >> 2). It is therefore essential to re-analyze the Type Ia supernova data in light of the cosmology (the R{sub h} = ct universe) that best represents the universe's dynamical evolution at early times. In this paper, we directly compare the distance relationship in {Lambda}CDM with that predicted by R{sub h} = ct, and each with the Union2.1 sample, and show that the two theories produce virtually indistinguishable profiles, though the fit with R{sub h} = ct has not yet been optimized. This is because the data cannot be determined independently of the assumed cosmology-the supernova luminosities must be evaluated by optimizing four parameters simultaneously with those in the adopted model. This renders the data compliant to the underlying theory, so the model-dependent data reduction should not be ignored in any comparative analysis between competing cosmologies. In this paper, we use R{sub h} = ct to fit the data reduced with {Lambda}CDM, and though quite promising, the match is not perfect. An even better fit would result with an optimization of the data using R{sub h} = ct from the beginning.

79 ASTRONOMY AND ASTROPHYSICS↗

Understanding Skill in EVA Mass Handling: Empirical Investigation - Volume 2

In this report we describe the details of our empirical protocol effort investigating skill in extravehicular mass handling using NASA's principal mass handling simulator, the precision air bearing floor. Contents of this report include a description of the necessary modifications to the mass handling simulator; choice of task, and the description of an operationally relevant protocol. Our independent variables are presented in the context of the specific operational issues they were designed to simulate. The explanation of our dependent variables focuses on the specific data processing procedures used to transform data from common laboratory instruments into measures that are relevant to a special class of nested control systems (discussed in Volume 1): manual interactions between an individual and the substantial environment. The data reduction is explained in the context of the theoretical foundation described in Volume 1. Finally as a preface to the presentation of the empirical data in Volume 3 of this report series, a set of detailed hypotheses is presented.

Riccio, Gary↗

Interacting Surfaces and Atmospheres in the Outer Solar System

The work reported here is an extension of ongoing efforts in data reduction and modeling of the spectral reflectances of several objects in the outer Solar System. In general terms, this requires an evaluation of the data obtained at the telescope, conversion of those data into geometric albedo units, and the combination of individual spectrum segments into a complete spectrum over the wavelength interval of interest. The modeling effort to produce a synthetic spectrum of a given Solar System object requires the complex refractive indices (the optical constants) of candidate surface materials, including ices, minerals, and organic solids. Those indices are primarily available only through contacts with other researchers, including colleagues at NASA Ames and at other institutions. Once obtained, the indices must be convolved with the telescopic data and then used in a computational model to produce the required synthetic spectrum for comparison with the data obtained at the telescope. In this way, we reach a convergence on the chemical composition and microstructural properties of the surfaces of objects in the outer Solar System.

DalleOre, Cristina↗

NICMOS Spectroscopy of HD 189733b

Spectral features corresponding to methane and water opacity were reported based on transmission spectroscopy of HD 189733b with Hubble/NICMOS. Recently, these data, and a similar data set for XO-1b, have been reexamined in Gibson et al. 2010, who claim they cannot reliably reproduce prior results. We examine the methods used by the Gibson team and identify two specific issues that could act to increase the formal uncertainties and to create instability in the minimization process. This would also be consistent with the GPA10 finding that they could not identify a way to select among the several instrument models they constructed. In the case of XO-1b, the Gibson team significantly changed the way in which the instrument model is defined (both with respect to the three approaches they used for HD 189733b, and the approach used by previous authors); this change, which omits the effect of the spectrum position on the detector, makes direct intercomparison of results difficult. In the experience of our group, the position of the spectrum on the detector is an important element of the instrument model because of the significant residual structure in the NICMOS spectral flat field. The approach of changing instrument models significantly complicates understanding the data reduction process and interpreting the results. Our team favors establishing a consistent method of handling NICMOS instrument systematic errors and applying it uniformly to data sets.

infrared↗

OPTICAL SPECTROSCOPIC SURVEY OF HIGH-LATITUDE WISE-SELECTED SOURCES

We report on the results of an optical spectroscopic survey at high Galactic latitude (|b| {>=} 30 Degree-Sign ) of a sample of WISE-selected targets, grouped by WISE W1 ({lambda}{sub eff} = 3.4 {mu}m) flux, which we use to characterize the sources WISE detected. We observed 762 targets in 10 disjoint fields centered on ultraluminous infrared galaxy candidates using DEIMOS on Keck II. We find 0.30 {+-} 0.02 galaxies arcmin{sup -2} with a median redshift of z = 0.33 {+-} 0.01 for the sample with W1 {>=} 120 {mu}Jy. The foreground stellar densities in our survey range from 0.23 {+-} 0.07 arcmin{sup -2} to 1.1 {+-} 0.1 arcmin{sup -2} for the same sample. We obtained spectra that produced science grade redshifts for {>=}90% of our targets for sources with W1 flux {>=}120 {mu}Jy that also had an i-band flux {approx}> 18 {mu}Jy. We used this for targeting very preliminary data reductions available to the team in 2010 August. Our results therefore present a conservative estimate of what is possible to achieve using WISE's Preliminary Data Release for the study of field galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

PROBING THE IGM/GALAXY CONNECTION. IV. THE LCO/WFCCD GALAXY SURVEY OF 20 FIELDS SURROUNDING UV-BRIGHT QUASARS

We publish the survey for galaxies in 20 fields containing ultraviolet bright quasars (with z{sub em} {approx} 0.1-0.5) that can be used to study the association between galaxies and absorption systems from the low-z intergalactic medium (IGM). The survey is magnitude limited (R {approx} 19.5 mag) and highly complete out to 10' from the quasar in each field. It was designed to detect dwarf galaxies (L {approx} 0.1L*) at an impact parameter {rho} {approx} 1 Mpc (z = 0.1) from a quasar. The complete sample (all 20 fields) includes R-band photometry for 84,718 sources and confirmed redshifts for 2800 sources. This includes 1198 galaxies with 0.005 < z < (z{sub em} - 0.01) at a median redshift of 0.18, which may associated with IGM absorption lines. All of the imaging was acquired with cameras on the Swope 40'' telescope and the spectra were obtained via slit mask observations using the WFCCD spectrograph on the Dupont 100'' telescope at Las Campanas Observatory. This paper describes the data reduction, imaging analysis, photometry, and spectral analysis of the survey. We tabulate the principal measurements for all sources in each field and provide the spectroscopic data set online.

79 ASTRONOMY AND ASTROPHYSICS↗

Computational Flame Diagnostics for Direct Numerical Simulations with Detailed Chemistry of Transportation Fuels

The goal of the proposed research is to create computational flame diagnostics (CFLD) that are rigorous numerical algorithms for systematic detection of critical flame features, such as ignition, extinction, and premixed and non-premixed flamelets, and to understand the underlying physicochemical processes controlling limit flame phenomena, flame stabilization, turbulence-chemistry interactions and pollutant emissions etc. The goal has been accomplished through an integrated effort on mechanism reduction, direct numerical simulations (DNS) of flames at engine conditions and a variety of turbulent flames with transport fuels, computational diagnostics, turbulence modeling, and DNS data mining and data reduction. The computational diagnostics are primarily based on the chemical explosive mode analysis (CEMA) and a recently developed bifurcation analysis using datasets from first-principle simulations of 0-D reactors, 1-D laminar flames, and 2-D and 3-D DNS (collaboration with J.H. Chen and S. Som at Argonne, and C.S. Yoo at UNIST). Non-stiff reduced mechanisms for transportation fuels amenable for 3-D DNS are developed through graph-based methods and timescale analysis. The flame structures, stabilization mechanisms, local ignition and extinction etc., and the rate controlling chemical processes are unambiguously identified through CFLD. CEMA is further employed to segment complex turbulent flames based on the critical flame features, such as premixed reaction fronts, and to enable zone-adaptive turbulent combustion modeling.

42 ENGINEERING↗

A comparison of two transient methods of measuring thermal conductivity of particulate samples.

A comparison is made of the line source (LS) method and the differential line source (DLS) method of measuring thermal conductivity of particulate materials in vacuum. The DLS method requires more instrumentation in the measuring circuitry (an additional amplifier and a differentiating circuit), but since it does not require a stable temperature to initiate a test, it does not need a sample temperature control system. DLS tests can be taken as the temperature in the samples is rising from liquid nitrogen temperature to room temperature. This eliminates the practice of extrapolating thermal conductivity over this large temperature range. Also, the advantages of reduced test time, data reduction time, and small sample temperature rise enable the experimenter to take about 7-12 DLS tests in the time of 2 LS tests. Test data from the two methods agree very well.

Scott, R. W.↗

A rocket-borne pulse-height analyzer for energetic particle measurements

The pulse-height analyzer basically resembles a time-sharing multiplexing data-acquisition system which acquires analog data (from energetic particle spectrometers) and converts them into digital code. The PHA simultaneously acquires pulse-height information from the analog signals of the four input channels and sequentially multiplexes the digitized data to a microprocessor. The PHA together with the microprocessor form an on-board real-time data-manipulation system. The system processes data obtained during the rocket flight and reduces the amount of data to be sent back to the ground station. Consequently the data-reduction process for the rocket experiments is speeded up. By using a time-sharing technique, the throughput rate of the microprocessor is increased. Moreover, data from several particle spectrometers are manipulated to share one information channel; consequently, the TM capacity is increased.

Leung, W.↗

The Hubble space telescope UV legacy survey of galactic globular clusters. I. Overview of the project and detection of multiple stellar populations

In this paper we describe a new UV-initiative Hubble Space Telescope project (GO-13297) that will complement the existing F606W and F814W database of the Advanced Camera for Surveys Globular Cluster (GC) Treasury by imaging most of its clusters through UV/blue WFC3/UVIS filters F275W, F336W, and F438W. This “magic trio” of filters has shown an uncanny ability to disentangle and characterize multiple population (MP) patterns in GCs in a way that is exquisitely sensitive to C, N, and O abundance variations. Combination of these passbands with those in the optical also gives the best leverage for measuring helium enrichment. The dozen clusters that had previously been observed in these bands exhibit a bewildering variety of MP patterns, and the new survey will map the full variance of the phenomenon. The ubiquity of multiple stellar generations in GCs has made the formation of these cornerstone objects more intriguing than ever; GC formation and the origin of their MPs have now become one and the same problem. In this paper we will describe the database and our data reduction strategy, as well as the uses we intend to make of the final photometry, astrometry, and PMs. We will also present preliminary color–magnitude diagrams from the data so far collected. These diagrams also draw on data from GO-12605 and GO-12311, which served as a pilot project for the present GO-13297.

79 ASTRONOMY AND ASTROPHYSICS↗

Methods for Incorporating Model Uncertainty into Exoplanet Atmospheric Analysis

A key goal of exoplanet spectroscopy is to measure atmospheric properties, such as abundances of chemical species, in order to connect them to our understanding of atmospheric physics and planet formation. In this new era of high-quality JWST data, it is paramount that these measurement methods are robust. When comparing atmospheric models to observations, multiple candidate models may produce reasonable fits to the data. Typically, conclusions are reached by selecting the best-performing model according to some metric. This ignores model uncertainty in favor of specific model assumptions, potentially leading to measured atmospheric properties that are overconfident and/or incorrect. In this paper, we compare three ensemble methods for addressing model uncertainty by combining posterior distributions from multiple analyses: Bayesian model averaging, a variant of Bayesian model averaging using leave-one-out predictive densities, and stacking of predictive distributions. We demonstrate these methods by fitting the Hubble Space Telescope (HST) + Spitzer transmission spectrum of the hot Jupiter HD 209458b using models with different cloud and haze prescriptions. All of our ensemble methods lead to uncertainties on retrieved parameters that are larger but more realistic and consistent with physical and chemical expectations. Since they have not typically accounted for model uncertainty, uncertainties of retrieved parameters from HST spectra have likely been underreported. We recommend stacking as the most robust model combination method. Our methods can be used to combine results from independent retrieval codes and from different models within one code. They are also widely applicable to other exoplanet analysis processes, such as combining results from different data reductions.

79 ASTRONOMY AND ASTROPHYSICS↗