Search NASA⌕ Search

SEARCH · Search NASA

Results for “dimensional analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

THREE-DIMENSIONAL GEOMETRIES AND THE ANALYSIS OF H II REGIONS

We compare emission line intensities from photoionization models of smooth and fractal shell geometries for low density H II regions, with particular focus on the low-ionization diagnostic diagram [N II]/H{alpha} versus H{alpha}. Building on previously published models and observations of Barnard's Loop, we show that the observed range of intensities and variations in the line intensity ratios may be reproduced with a three-dimensional shell geometry. Our models adopt solar abundances throughout the model nebula, in contrast with previous one-dimensional modeling which suggested the variations in line intensity ratios could only be reproduced if the heavy element abundances were increased by a factor of {approx}1.4. For spatially resolved H II regions, the multiple sightlines that pierce and sample different ionization and temperature conditions within smooth and fractal shells produce a range of line intensities that are easily overlooked if only the total integrated intensities from the entire nebula model are computed. Our conclusion is that inference of H II region properties, such as elemental abundances, via photoionization models of one-dimensional geometries must be treated with caution and further tested through three-dimensional modeling.

79 ASTRONOMY AND ASTROPHYSICS↗

A provisional analysis of two-dimensional turbulent mixing with variable density

A predictive method for the titled flows based on the Prandtl energy method was developed and assessed by comparing predicted results with experimental results. For constant-density flows, both gross properties such as spreading rate and maximum turbulent kinetic energy and detailed properties such as mean shear stress distributions are shown to be well predicted. For variable-density flows, considerable attention is devoted to the inclusion in the analysis of the added effect of pressure fluctuations and of the variation in the several extant empirical parameters on the turbulent kinetic energy. It is found that a variation with Mach number of the characteristic Reynolds number for turbulent transport is needed to account for the observed decrease in spreading rate. The predictions which result from these considerations are compared with the limited experimental data presently available for the two crucial cases: compressible adiabatic mixing and low-speed isothermal mixing of two dissimilar gases.

Libby, P. A.↗

Application of satellite data to the variational analysis of the three dimensional wind field

The use of a hybrid vertical velocity algorithm, composed of the kinematic and adiabatic methods of Pettersen (1956), to analyze three-dimensional wind fields is studied. The basic principles and advantages and disadvantages of the adiabatic and kinematic techniques are discussed. The adiabatic method is useful in the clear regions and above the tropopause and the kinematic method is applicable near the surface and in cloudy regions. The effects of a finite difference scheme and the objective analysis of Barnes (1973) on a wind field are investigated. The variational algorithm is evaluated by applying it to SESAME data collected in April 1979.

Chance, Barbara A.↗

Analysis of a hydrocarbon scramjet with augmented preburning

This paper presents the results of a feasibility study of a hydrocarbon scramjet design utilizing an augmented preburner upstream of the main fuel injector locations. The combustor design evaluated here is for a small hypersonic research vehicle. It consists of a preburner into which a small amount of fuel is burned with on-board liquid oxygen and injected into the main airflow, upstream of the main fuel injector locations, thus ensuring that combustion is present and uninterrupted. Two degrees of analysis are presented including a one-dimensional cycle analysis and a complete computational fluid dynamic analysis with finite-rate chemistry and a two-equation turbulence model. Comparison of these analyses show good agreement when the CFD-predicted fuel consumption schedule is used in the cycle analysis.

Molvik, Gregory A.↗

Comparative analysis of three-dimensional structures of homodimers of uridine phosphorylase from Salmonella typhimurium in the unligated state and in a complex with potassium ion

The spatial organization of the homodimer of unligated uridine phosphorylase from Salmonella typhimurium (St UPh) was determined with high accuracy. The structure was refined at 1.80 A resolution to R{sub work} = 16.1% and R{sub free} = 20.0%. The rms deviations for the bond lengths, bond angles, and chiral angles are 0.006 A, 1.042{sup o}, and 0.071{sup o}, respectively. The coordinate error estimated by the Luzzati plot is 0.166 A. The coordinate error based on the maximum likelihood is 0.199 A. A comparative analysis of the spatial organization of the homodimer in two independently refined structures and the structure of the homodimer St UPh in the complex with a K{sup +} ion was performed. The substrate-binding sites in the homodimers StUPhs in the unligated state were found to act asynchronously. In the presence of a potassium ion, the three-dimensional structures of the subunits in the homodimer are virtually identical, which is apparently of importance for the synchronous action of both substrate-binding sites. The atomic coordinates of the refined structure of the homodimer and structure factors have been deposited in the Protein Data Bank (PDB ID code 3DPS).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantitative Analysis Of Three-dimensional Branching Systems From X-ray Computed Microtomography Data

Branching structures such as lungs, blood vessels and plant roots play a critical role in life. Growth, structure, and function of these branching structures have an immense effect on our lives. Therefore, quantitative size information on such structures in their native environment is invaluable for studying their growth and the effect of the environment on them. X-ray computed tomography (XCT) has been an effective tool for in situ imaging and analysis of branching structures. We developed a costless tool that approximates the surface and volume of branching structures. Our methodology of noninvasive imaging, segmentation and extraction of quantitative information is demonstrated through the analysis of a plant root in its soil medium from 3D tomography data. XCT data collected on a grass specimen was used to visualize its root structure. A suite of open-source software was employed to segment the root from the soil and determine its isosurface, which was used to calculate its volume and surface. This methodology of processing 3D data is applicable to other branching structures even when the structure of interest is of similar x-ray attenuation to its environment and difficulties arise with sample segmentation.

Environmental Molecular Sciences Laboratory↗

LaserOrigami (LO) of three-dimensional (3D) components: Experimental analysis and numerical modeling-part II

The present work explores how the choice of the scanning patterns can affect the final shapes of 3D components manufactured by laser-origami with a High-Power Diode Laser (HPDL). The experimental approach allowed the achievement of high bending angles, also avoiding any distortion on the surface of AISI 304 stainless steel workpiece. Optimization of the operational parameters led to the best prototype of the 3D components, with the closest respect of the strictest dimensional and geometrical tolerances. In addition, a thermo-mechanical model to predict the final shape of the 3D components was developed. The numerical model, implemented by Finite Element Method (FEM), was discovered to be a reliable tool in predicting the final shape of the prototypes, matching with a great deal of accuracy the experimental results. Specifically, the model allowed the estimation of the temperature distribution and nodal displacements of the components varying both the setting of the laser parameters and the choice of the scanning patterns.

47 OTHER INSTRUMENTATION↗

Comparison study of the partial-breast irradiation techniques: Dosimetric analysis of three-dimensional conformal radiation therapy, electron beam therapy, and helical tomotherapy depending on various tumor locations

The partial-breast irradiation (PBI) technique, an alternative to whole-breast irradiation, is a beam delivery method that uses a limited range of treatment volume. The present study was designed to determine the optimal PBI treatment modalities for 8 different tumor locations. Treatment planning was performed on computed tomography (CT) data sets of 6 patients who had received lumpectomy treatments. Tumor locations were classified into 8 subsections according to breast quadrant and depth. Three-dimensional conformal radiation therapy (3D-CRT), electron beam therapy (ET), and helical tomotherapy (H-TOMO) were utilized to evaluate the dosimetric effect for each tumor location. Conformation number (CN), radical dose homogeneity index (rDHI), and dose delivered to healthy tissue were estimated. The Kruskal-Wallis, Mann-Whitney U, and Bonferroni tests were used for statistical analysis. The ET approach showed good sparing effects and acceptable target coverage for the lower inner quadrant—superficial (LIQ-S) and lower inner quadrant—deep (LIQ-D) locations. The H-TOMO method was the least effective technique as no evaluation index achieved superiority for all tumor locations except CN. The ET method is advisable for treating LIQ-S and LIQ-D tumors, as opposed to 3D-CRT or H-TOMO, because of acceptable target coverage and much lower dose applied to surrounding tissue.

61 RADIATION PROTECTION AND DOSIMETRY↗

Cosmological analysis of three-dimensional BOSS galaxy clustering and Planck CMB lensing cross correlations via Lagrangian perturbation theory

In this work, we present a formalism for jointly fitting pre- and post-reconstruction redshift-space clustering (RSD) and baryon acoustic oscillations (BAO) plus gravitational lensing (of the CMB) that works directly with the observed 2-point statistics. The formalism is based upon (effective) Lagrangian perturbation theory and a Lagrangian bias expansion, which models RSD, BAO and galaxy-lensing cross correlations within a consistent dynamical framework. As an example we present an analysis of clustering measured by the Baryon Oscillation Spectroscopic Survey in combination with CMB lensing measured by Planck. The post-reconstruction BAO strongly constrains the distance-redshift relation, the full-shape redshift-space clustering constrains the matter density and growth rate, and CMB lensing constrains the clustering amplitude. Using only the redshift space data we obtain Ω m = 0.303 ± 0.008, $H_0$ = 69.21 ± 0.78 and $σ_8$ = 0.743 ± 0.043. The addition of lensing information, even when restricted to the Northern Galactic Cap, improves constraints to Ω m = 0.303 ± 0.008, $H_0$ = 69.21 ± 0.77 and $σ_8$ = 0.707 ± 0.035, in tension with CMB and cosmic shear constraints. The combination of Ω m and $H_0$ are consistent with Planck, though their constraints derive mostly from redshift-space clustering. The low $σ_8$ value are driven by cross correlations with CMB lensing in the low redshift bin ($\textit{z}$ ≃ 0.38) and at large angular scales, which show a 20% deficit compared to expectations from galaxy clustering alone. We conduct several systematics tests on the data and find none that could fully explain these tensions.

79 ASTRONOMY AND ASTROPHYSICS↗

Viscous-inviscid aerodynamic analysis of two-dimensional thrust augmentors

A theory for the computation of two-dimensional thrust augmentor performance is developed. The flow field is assumed to be incompressible, of uniform density and statistically steady. The flow in and around the augmentor is assumed to consist of an outer, inviscid part and an inner, viscous part. The outer field is calculated analytically and then matched with the inner, viscous field, which is computed by means of integral methods. This form of analysis leads to a simple and economical approach, particularly useful for conducting parametric studies. The theoretical results are compared with recently acquired experimental data.

Tavella, D. A.↗

Comparison of Experimental Data and Computations Fluid Dynamics Analysis for a Three Dimensional Linear Plug Nozzle

A three dimensional linear plug nozzle of area ratio 12.79 was designed by EADS Space Transportation (former Astrium Space Infrastructure). The nozzle was tested within the German National Technology Program 'LION' in a cold air wind tunnel by TU Dresden. The experimental hardware and test conditions are described. Experimental data was obtained for the nozzle without plug side wall fences at a nozzle pressure ratio of 116 and then with plug side wall fences at NPR 110. Schlieren images were recorded and axial profiles of plug wall static pressures were measured at several spanwise locations and on the plug base. Detailed CFD analysis was performed for these nozzle configurations at NPR 116 by NASA MSFC. The CFD exhibits good agreement with the experimental data. A detailed comparison of the CFD results and the experimental plug wall pressure data are given. Comparisons are made for both the without and with plug side wall fence configurations. Numerical results for density gradient are compared to experimental Schlieren images. Experimental nozzle thrust efficiencies are calculated based on the CFD results. The CFD results are used to illustrate the plug nozzle fluid dynamics. The effect of the plug side wall is emphasized.

Ruf, J. H.↗

Comparison of Experimental Data and Computations Fluid Dynamics Analysis for a Three Dimensional Linear Plug Nozzle

A three dimensional linear plug nozzle of area ratio 12.79 was designed by Astrium. The nozzle was tested within the German National Technology Program LION in a cold air wind tunnel by TU Dresden. The experimental hardware and test conditions are described. Experimental data was obtained for the nozzle without plug side wall fences and then with plug side wall fences. Experimental data for two nozzle pressure ratios (NPR), 116 and 45, are presented for the without fence and with fence configurations. Schlieren images of both NPR were recorded. Axial profiles of plug wall static pressures were measured at several spanwise locations and on the plug base. Detailed computational fluid dynamics (CFD) analysis was performed for these nozzle configurations by NASA MSFC. The CFD exhibits good agreement with the experimental data. A detailed comparison of the CFD results and the experimental plug wall pressure data is given for four test conditions; at both NPRs, without and with plug side wall fences. Numerical schlieren images are compared to experimental schlieren images. Nozzle thrust efficiencies are calculated from the CFD results. The CFD results are used to illustrate the plug nozzle fluid dynamics for all four test conditions. The effect of the plug side wall fences at both NPRs is emphasized.

Ruf, J. H.↗

Histogram data analysis for a three-dimensional diluted ferromagnetic 3- and 4-state potts models

On the basis of a histogram data analysis, phase transitions (PTs) in a three-dimensional diluted ferromagnetic 3- and 4-state Potts models are investigated. Systems with linear dimensions of L = 20-60 and spin concentrations of p = 1.00, 0.95, and 0.65 are studied. It is shown that the introduction of weak disorder (p {approx} 0.95) into the system in the three-dimensional Potts model with q = 3 is sufficient to change a first-order phase transition to a second-order one, whereas, in the three-dimensional Potts model with q = 4, the change of a first-order phase transition to a second-order one occurs only in the presence of strong disorder (p {approx} 0.65).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A two-dimensional finite difference program for thermal analysis of rocket thrust chambers

A two-dimensional finite difference computer model for thermal analysis of rocket thrust chambers has been developed. The model uses an iterative scheme for calculating the temperature distribution within the chamber wall and implements a successive overrelaxation formula for a quick convergence. The inputs of the models are the dimensions of the thrust chamber wall, types of materials used, heat transfer coefficients and temperatures of the hot gas and the coolant. The resulting output of the program consists of the nodal temperature distribution, heat transfer to the coolant and heat transfer from the hot gas.

Naraghi, Mohammad H.↗

Static aeroelastic analysis of a three-dimensional generic wing

A continuation of research on the static aeroelastic analysis of a generic wing configuration is presented. Results of the study of the asymmetric oblique wing model developed by Rockwell International, in conjunction with the NASA Oblique Wing Research Aircraft Program, are reported. The capability to perform static aeroelastic analyses of an oblique wing at arbitrary skew positions is demonstrated by applying the MSC/NASTRAN static analysis scheme modified by the aerodynamic influence coefficient matrix created by the NASA Ames aerodynamic panel codes. The oblique wing is studied at two skew angles, and in particular, the capability to calculate 3-D thickness effects on the aerodynamic properties of the wing is investigated. The ability to model asymmetric wings in both subsonic and supersonic Mach numbers is shown. The aerodynamic influence coefficient matrix computed by the external programs is inserted in MSC/NASTRAN static aeroelasticity analysis run stream to compute the aeroelastic deformation and internal forces. Various aerodynamic coefficients of the oblique wing were computed for two Mach numbers, 0.7 and 1.4, and the angle of attach -5 through 15 deg.

Green, John A.↗

Fractal analysis of Venus topography in Tinatin Planitia and Ovda Regio

A one-dimensional fractal analysis is applied to Magellan altimetry data for two 20 x 20 deg equatorial regions on Venus. For the Ovda Regio, highlands the power spectra of the altimetry data correlate well with power law (fractal) statistics over the full range of wavelengths considered 36-703 km; the mean fractal dimension is D(Ovda) = 1.64. For the Tinatin Planitia lowlands, the power spectra consistently show a rollover at long wavelengths, (greater than 200 km), the long-wavelength topography in this region either never developed or has subsequently relaxed. The mean of the best fit fractal dimension for Tinatin is D(Tinatin) = 1.41. The measure of roughness (RA) correlates well with variations in relief, especially at short wavelengths (about 50 km). The quantitative analysis of Venus topography can be applied on a global scale. The one-dimensional method can be extended to two-dimensional space, yielding two-dimensional maps of regional D and RA, allowing a more complete use of regional two-dimensional altimetry data.

Kucinskas, Algis B.↗