Search NASA⌕ Search

SEARCH · Search NASA

Results for “facets”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Direct imaging of InSb (110)-(1x1) surface grown by molecular beam epitaxy

High-resolution transmission electron microscopy under a profile imaging condition (HR-profile TEM) was employed to determine the structural model for the InSb(110)-(1x1) relaxation surface grown by molecular beam epitaxy (MBE). HR-profile TEM analyses indicate that the chevron model, which is widely accepted for zinc-blende-type III-V(110)-(1x1) surfaces prepared by cleavage, is also applicable to the InSb(110)-(1x1) surface prepared under an Sb-rich MBE condition. The assignment of atomic species (In or Sb) of InSb(110)-(1x1) surfaces was confirmed based on a HR-profile TEM image that captures the connected facets of InSb(110)-(1x1) and InSb(111)B-(2x2). On the basis of the well-known atomic species of InSb(111)B-(2x2), the atomic species of the InSb(110)-(1x1) surface were deduced straightforwardly: the atoms shifted upward and downward at the topmost layer of the InSb(110)-(1x1) surface are Sb and In, respectively. The atomic arrangements of the InSb(110)-(1x1)-InSb(111)B-(2x2) facet determined by HR-profile TEM may represent the atomic arrangements of zinc-blende-type III-V(331)B surfaces.

36 MATERIALS SCIENCE↗

Scanning tunneling microscopy reveals LiMnAs is a room temperature anti-ferromagnetic semiconductor

We performed scanning tunneling microscopy and spectroscopy on a LiMnAs(001) thin film epitaxially grown on an InAs(001) substrate by molecular beam epitaxy. While the in situ cleavage exposed only the InAs(110) non-polar planes, the cleavage continued into the LiMnAs thin layer across several facets. We combined both topography and current mappings to confirm that the facets correspond to LiMnAs. By spectroscopy we show that LiMnAs has a band gap. The band gap evidenced in this study, combined with the known Neel temperature well above room temperature, confirms that LiMnAs is a promising candidate for exploring the concepts of high temperature semiconductor spintronics based on antiferromagnets.

36 MATERIALS SCIENCE↗

Ge atom distribution in buried dome islands

Laser-assisted atom probe tomography microscopy is used to provide direct and quantitative compositional measurements of tri-dimensional Ge distribution in Ge dome islands buried by Si. Sub-nanometer spatial resolution 3D imaging shows that islands keep their facets after deposition of the Si cap, and that the island/substrate/Si cap interfaces are abrupt. The core of the domes contains 55% of Ge, while the island shell exhibits a constant composition of 15% of Ge. The {l_brace}113{r_brace} facets of the islands present a Ge enrichment up to 35%. The wetting layer composition is not homogeneous, varying from 9.5% to 30% of Ge.

36 MATERIALS SCIENCE↗

Surfactant assisted growth of MgO films on GaN

Thin epitaxial films of <111> oriented MgO on [0001]-oriented GaN were grown by molecular beam epitaxy and pulsed laser deposition using the assistance of a vapor phase surfactant. In both cases, surfactant incorporation enabled layer-by-layer growth and a smooth terminal surface by stabilizing the {l_brace}111{r_brace} rocksalt facet. Metal-insulator-semiconductor capacitor structures were fabricated on n-type GaN. A comparison of leakage current density for conventional and surfactant-assisted growth reveals a nearly 100 Multiplication-Sign reduction in leakage current density for the surfactant-assisted samples. These data verify numerous predictions regarding the role of H-termination in regulating the habit of rocksalt crystals.

36 MATERIALS SCIENCE↗

High transformer ratio drive beams for wakefield accelerator studies

For wakefield based acceleration schemes, use of an asymmetric (or linearly ramped) drive bunch current profile has been predicted to enhance the transformer ratio and generate large accelerating wakes. We discuss plans and initial results for producing such bunches using the 20 to 23 GeV electron beam at the FACET facility at SLAC National Accelerator Laboratory and sending them through plasmas and dielectric tubes to generate transformer ratios greater than 2 (the limit for symmetric bunches). The scheme proposed utilizes the final FACET chicane compressor and transverse collimation to shape the longitudinal phase space of the beam.

43 PARTICLE ACCELERATORS↗

Head erosion with emittance growth in PWFA

Head erosion is one of the limiting factors in plasma wakefield acceleration (PWFA). We present a study of head erosion with emittance growth in field-ionized plasma from the PWFA experiments performed at the FACET user facility at SLAC. At FACET, a 20.3 GeV bunch with 1.8 Multiplication-Sign 10{sup 10} electrons is optimized in beam transverse size and combined with a high density lithium plasma for beam-driven plasma wakefield acceleration experiments. A target foil is inserted upstream of the plasma source to increase the bunch emittance through multiple scattering. Its effect on beamplasma interaction is observed with an energy spectrometer after a vertical bend magnet. Results from the first experiments show that increasing the emittance has suppressed vapor field-ionization and plasma wakefields excitation. Plans for the future are presented.

43 PARTICLE ACCELERATORS↗

Step-step interactions on GaAs (110) nanopatterns

The step-step interactions on vicinal GaAs (110) surface patterns have been extracted from the quantitative analysis of the terrace width distribution (TWD). We have specifically studied the interactions in near-equilibrium faceting and kinetics-driven step bunching and meandering formed by spontaneous self-organization or through the modification of GaAs growth kinetics by atomic hydrogen. We show that the experimental TWDs determined from atomic force microscopy measurements can be accurately described by a weighed sum of a generalized Wigner distribution and several Gaussians. The results of our calculations indicate that straight facets are formed during high temperature homoepitaxy due to attractive interactions between [110] steps. At low temperatures, steady state attractive interactions in [110] step bunches are preceded by a transition regime dominated by entropic and energetic repulsions between meandering [11n]-type steps (n {>=} 2), whose population density exceeds that of the [110] bunched steps. In addition, it has been found that atomic H reduces the attractive interactions between [110] bunched steps and enhances entropic and dipole-induced energetic repulsions between H-terminated [11n] steps through the inhibition of As-As bond formation at step edges. Our analysis has evidenced a correlation between the value of the adjustable parameter that accounts in our model for the specific weight of the secondary peaks in the TWD ({beta}) and the extent of transverse meandering on the vicinal surface.

36 MATERIALS SCIENCE↗

Volmer-Weber growth of AlSb on Si(111)

AlSb is grown by molecular beam epitaxy. The evolution and the relaxation of the deposited AlSb layer is investigated by synchrotron-based in situ grazing incidence x-ray diffraction (GID), and the analysis of the real space distribution is performed by atomic force microscopy. AlSb forms islands with (111)A polarity and {l_brace}110{r_brace} surface orientations with different side facets following the Volmer-Weber growth mode. GID investigations reveal facet rods originating from AlSb{l_brace}110{r_brace} islands. It is shown that a concentration of only 0.7% AlSb{l_brace}110{r_brace} oriented domains influences the diffraction pattern in such a way that additional crystal truncation rods parallel to the surface appear.

36 MATERIALS SCIENCE↗

Validation of transport models using additive flux minimization technique

A new additive flux minimization technique is proposed for carrying out the verification and validation (V and V) of anomalous transport models. In this approach, the plasma profiles are computed in time dependent predictive simulations in which an additional effective diffusivity is varied. The goal is to obtain an optimal match between the computed and experimental profile. This new technique has several advantages over traditional V and V methods for transport models in tokamaks and takes advantage of uncertainty quantification methods developed by the applied math community. As a demonstration of its efficiency, the technique is applied to the hypothesis that the paleoclassical density transport dominates in the plasma edge region in DIII-D tokamak discharges. A simplified version of the paleoclassical model that utilizes the Spitzer resistivity for the parallel neoclassical resistivity and neglects the trapped particle effects is tested in this paper. It is shown that a contribution to density transport, in addition to the paleoclassical density transport, is needed in order to describe the experimental profiles. It is found that more additional diffusivity is needed at the top of the H-mode pedestal, and almost no additional diffusivity is needed at the pedestal bottom. The implementation of this V and V technique uses the FACETS::Core transport solver and the DAKOTA toolkit for design optimization and uncertainty quantification. The FACETS::Core solver is used for advancing the plasma density profiles. The DAKOTA toolkit is used for the optimization of plasma profiles and the computation of the additional diffusivity that is required for the predicted density profile to match the experimental profile.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evanescent-wave coupled right angled buried waveguide: Applications in carbon nanotube mode-locking

We present an evanescent-field device based on a right-angled waveguide. This consists of orthogonal waveguides, with their points of intersection lying along an angled facet of the chip. Light guided along one waveguide is incident at the angled dielectric-air facet at an angle exceeding the critical angle, so that the totally internally reflected light is coupled into the second waveguide. By depositing a nanotube film on the angled surface, the chip is then used to mode-lock an Erbium doped fiber ring laser with a repetition rate of 26 MHz, and pulse duration of 800 fs.

36 MATERIALS SCIENCE↗

Controlled synthesis of nickel ferrite nanocrystals with tunable properties using a novel induction thermal plasma method

Nickel ferrite spinel nanopowders were synthesised using a solution spray radio-frequency inductively coupled plasma reactor over a wide range of compositions (Ni{sub x}Fe{sub 3-x}O{sub 4}, x ≤ 1), with metastable powders produced for x = 0, 0.25, and 0.5. X-ray fluorescence and X-ray diffraction coupled to Rietveld refinement show that this synthesis technique offers an excellent level of control over both the chemical and crystallographic composition of the nanopowder through the control of the input Fe/Ni ratio. The technique produces highly crystalline nanopowders without the need for post-synthesis annealing. A bulk Fe/Ni ratio ≥2 yields a pure spinel Ni{sub x}Fe{sub 3-x}O{sub 4} phase, whereas Fe/Ni ratio <2 results in the excess Ni partitioning to a secondary bunsenite (Ni{sub x},Fe{sub 1-x})O phase. Morphological analysis using transmission electron microscopy shows that two types of particles are produced in different parts of the reactor: a highly faceted powder with the truncated octahedron morphology and a smaller-sized random agglomerate. The faceted particles have a log-normal particle size distribution, with an average size of about 30 nm while the agglomerates have a characteristic length of ∼3–5 nm.

36 MATERIALS SCIENCE↗

Strain-induced vertical self-organization of semiconductor quantum dots: A computational study

Atomistic strain simulations based on the valence force field method are employed to study the vertical arrangements of semiconductor quantum dot (QD) multilayers. The effects of the QD shape, dimensions, and materials parameters are systematically investigated, varying independently the following parameters: spacer width H, QD lateral spacing D, base b, and height h, slope of the side facets, elastic properties of the dot and the substrate materials, and lattice mismatch between the dot and the substrate. The transition between vertically aligned and anti-aligned structures is found to be determined mainly by the ratios H/D and b/D, as well as by the strain anisotropy of the substrate and to a lesser extent of the QD. The dependence on the QD height h is significant only for steep side facets and large aspect ratios h/b, and the effects of the lattice mismatch strain and the bulk elastic moduli are found to be negligible. The comparison with experimental data shows an excellent agreement with the results from the simulations, demonstrating that the presented analysis results in precise theoretical predictions for the vertical self-organization regime in a wide range of QD materials systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analyses of heterogeneous deformation and subsurface fatigue crack generation in alpha titanium alloy at low temperature

Subsurface crack initiation in high-cycle fatigue has been detected as (0001) transgranular facet in titanium alloys at low temperature. The discussion on the subsurface crack generation was reviewed. Analyses by neutron diffraction and full constraints model under tension mode as well as crystallographic identification of the facet were focused. The accumulated tensile stress along <0001> may be responsible to initial microcracking on (0001) and the crack opening.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magic angle and height quantization in nanofacets on SiC(0001) surfaces

We report on the density-functional calculations that provide microscopic mechanism of the facet formation on the SiC (0001) surface. We first identify atom-scale structures of single-, double-, and quad-bilayer steps and find that the single-bilayer (SB) step has the lowest formation energy. We then find that the SB steps are bunched to form a nanofacet with a particular angle relative to the (0001) plane (magic facet angle) and with a discretized height along the (0001) direction (height quantization). We also clarify a microscopic reason for the self-organization of the nanofacet observed experimentally.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Integrated patch and slot array antenna for terahertz quantum cascade lasers at 4.7 THz

Our work presents a slot and a patch array antenna at the front facet of a 4.7 THz quantum cascade laser as extractor, decreasing the facet reflectivity down to 2.6%. The resulting output power increases by a factor 2 and the slope efficiency by a factor 4. The simulated and the measured far-fields are in good agreement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The DFT+Umol method and its application to the adsorption of CO on platinum model clusters

Semi-local DFT approximations are well-known for their difficulty with describing the correct site preference for the adsorption of CO molecules on (111) surfaces of several late transition metals. To address this problem originating from a residual self-interaction in the CO LUMO, we present the DFT+Umol approach which generalizes the empirical DFT+U correction to fragment molecular orbitals. This correction is applied to examine CO adsorption energies at various sites on the (111) facets of cuboctahedral clusters Pt{sub m}(CO){sub 8} (m = 79, 140, 225). The DFT+Umol correction leaves the electronic ground state of metal clusters, in particular their d-band structure, essentially unchanged, affecting almost exclusively the energy of the CO LUMO. As a result, that correction is significantly stronger for complexes at hollow sites, hence increases the propensity for adsorption at top sites. We also analyze competing edge effects on the (111) facets of the cluster models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Semipolar (202{sup ¯}1) GaN and InGaN quantum wells on sapphire substrates

Here, we demonstrate a process to produce planar semipolar (202{sup ¯}1) GaN templates on sapphire substrates. We obtain (202{sup ¯}1) oriented GaN by inclined c-plane sidewall growth from etched sapphire, resulting in single crystal material with on-axis x-ray diffraction linewidth below 200 arc sec. The surface, composed of (101{sup ¯}1) and (101{sup ¯}0) facets, is planarized by the chemical-mechanical polishing of full 2 in. wafers, with a final surface root mean square roughness of <0.5 nm. We then analyze facet formation and roughening mechanisms on the (202{sup ¯}1) surface and establish a growth condition in N{sub 2} carrier gas to maintain a planar surface for further device layer growth. Finally, the capability of these semipolar (202{sup ¯}1) GaN templates to produce high quality device structures is verified by the growth and characterization of InGaN/GaN multiple quantum well structures. It is expected that the methods shown here can enable the benefits of using semipolar orientations in a scalable and practical process and can be readily extended to achieve devices on surfaces using any orientation of semipolar GaN on sapphire.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗