Search NASA⌕ Search

SEARCH · Search NASA

Results for “frequency range”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Control of Jovian Radio Emission by Callisto

Galileo has been in orbit around Jupiter since December 1995 and a large database has been collected. We present the results of a survey of the plasma wave data for the frequency range 2.0 MHz to 5.6 MHz, the low frequency decametric (DAM) emissions. While the control of a portion of the radio emission by the moon lo is well known, and Ganymede control has been more recently indicated, we report that a small but significant portion of DAM emission is seen to be correlated with the orbital phase of Callisto. While the occurrence rate of emission controlled by Ganymede and Callisto is considerably less than for lo, the power levels can be nearly the same. We estimate the power of the Callisto-dependent emission to be approx. 70% of the Io-dependent radio emission and about the same as the Ganymede-dependent radio emission. This result indicates an Alfven current system associated with Callisto, and thus a significant interaction of the magnetosphere of Callisto with that of Jupiter as is believed to exist for both lo and Ganymede.

Menietti, J. D.↗

Ultrasonic Studies of Composites Undergoing Thermal and Fatigue Loading

New composite materials possess attractive properties for use in advanced aircraft. A necessary requirement for their introduction into aeronautic use is an accurate understanding of their long term aging processes so that proper design criteria can be established. In order to understand those properties, these composites must be exposed to thermal and load cycles that are characteristic of flight conditions. Additionally, airline companies will require nondestructive evaluation (NDE) methods that can be used in the field to assess the condition of these new materials as they age. As part of an effort to obtain the required information about new composites for aviation use, we are performing ultrasonic measurements both in the NDE laboratory and in the materials testing laboratory at NASA. The materials testing laboratory is equipped with environmental chambers mounted on load frames so that composite samples can be exposed to thermal and loading cycles representative of flight protocols. Applying both temperature and load simultaneously will help to highlight temperature and load interactions during the aging of these composite materials. This study reports on our initial ultrasonic attenuation results from thermoset and thermoplastic composite samples. Ultrasonic attenuation measurements have been used reliably to assess the effects of material degradation. For example, recently, researchers have shown that by using frequencies of ultrasound on the order of 24 MHz, they could obtain adequate contrast in the evaluation of thermal degradation in these composites. This paper will present data that shows results at a lower frequency range. In addition, we report results on the frequency dependence of attenuation as the slope of attenuation with respect to frequency, beta = delta alpha (f) / delta f. The slope of attenuation is an attractive parameter since it is quantitative, yet does not require interface corrections like conventional quantitative attenuation measurements. This is a consequence of the assumption that interface correction terms are frequently independent. Uncertainty in those corrections terms compromises the value of conventional quantitative attenuation data.

Madaras, Eric I.↗

Infrared Optical Properties of La(sub 0.7)Ca(sub 0.3)MnO(sub 3) Epitaxial Films

The reflectance of La(sub 0.7)Ca(sub 0.3)MnO(sub 3) epitaxial films on perovskite substrates with a range of lattice constants is studied in the frequency range of 50 cm(sup -1) - 5000cm(sup -1). The complex dielectric functions of the bare La(sub 0.7)Ca(sub 0.3)MnO(sub 3) films are obtained by modeling the measured reflectivity spectra of the two-layer La(sub 0.7)Ca(sub 0.3)MnO(sub 3)/substrate system with separaately measured dielectric functions of the bare substrate.

lattice distortion epitaxial films lattice polaron↗

High Temperature Characteristics of Coplanar Waveguide on R-Plane Sapphire and Alumina

This paper presents the characteristics of coplanar waveguide transmission lines on R-plane sapphire and alumina over the temperature range of 25 to 400 C and the frequency range of 45 MHz to 50 GHz. A Thru-Reflect-Line calibration technique and open circuited terminated stubs are used to extract the attenuation and effective permittivity. It is shown that the effective permittivity of the transmission lines and, therefore, the relative dielectric constant of the two substrates increase linearly with temperature. The attenuation of the coplanar waveguide varies linearly with temperature through 200 C, and increases at a greater rate above 200 C.

Ponchak, George E.↗

Acoustic Optimization for Anti-Phase Asymmetric Rotor

This investigation seeks to optimize the implementation of anti-phase alternating trailing edge (TE) patterns for rotor noise suppression. The design objective is to maximize reduction of noise perceived by the community while maintaining the aerodynamic thrust. Computations using a three-dimensional Unsteady-Reynolds-Averaged-Navier-Stokes (URANS) with k-w Shear Stress Transport (SST) turbulence model and Ffowcs-Williams and Hawkings (FW-H) formula are used to obtain aerodynamic thrust and far-field noise level. A parametric acoustic study of 13 configurations of KDE rotor with variable alternating trailing edge period, alternating trailing edge length, and trailing edge deflection angle is conducted. The best design candidate for the KDE rotor has a four-period TE waveform which results in a reduction in far-field noise level of 2.1 dB in the hover condition and a reduction of 1.1 dB in the forward flight condition at 9.7 m/s. A further parametric acoustic study is conducted for a different rotor manufactured by APC. Six APC rotor design candidates are simulated. The best design candidate 4H for the APC rotor results in a reduction in far-field noise level of 4.0 dB in the hover condition and a reduction of 1.3 dB in the forward flight condition at 9.7 m/s. A series of acoustic experiments in the Penn State University (PSU) anechoic chamber have been conducted. In the forward flight condition at 9.7 m/s, the APC anti-phase 4H rotor offers clear evidence of noise suppression capability across a wide range of the azimuthal angle. In the broadband frequency range of 2000-4000 Hz, the APC anti-phase 4H rotor produces as much as 6 dB noise reduction. The experimental results appear to confirm the noise suppression capability of the proposed anti-phase rotor design concepts.

Xiong, Juntao↗

Noise Properties of Rectifying Nanopore

Ion currents through three types of rectifying nanoporous structures are studied and compared: conically shaped polymer nanopores, glass nanopipettes, and silicon nitride nanopores. Time signals of ion currents are analyzed by the power spectrum. We focus on the low-frequency range where the power spectrum magnitude scales with frequency, f, as 1/f. Glass nanopipettes and polymer nanopores exhibit nonequilibrium 1/f noise; thus, the normalized power spectrum depends on the voltage polarity and magnitude. In contrast, 1/f noise in rectifying silicon nitride nanopores is of equilibrium character. Various mechanisms underlying the voltage-dependent 1/f noise are explored and discussed, including intrinsic pore wall dynamics and formation of vortices and nonlinear flow patterns in the pore. Experimental data are supported by modeling of ion currents based on the coupled Poisson-Nernst-Planck and Navier-Stokes equations. We conclude that the voltage-dependent 1/f noise observed in polymer and glass asymmetric nanopores might result from high and asymmetric electric fields, inducing secondary effects in the pore, such as enhanced water dissociation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adding linear kinetic effects to existing finite-difference simulations

We present the proof-of-principle KINETIC-J module for iterative addition of all-order kinetic effects (parallel and perpendicular) in both the IC and EC frequency ranges, to any existing FD or FE frequency-domain full-wave RF simulation. The module calculates the linear, kinetic plasma current, such that given f 0 (r,v) and the cold plasma solution as an initial guess at the wave electric field, iterating the KINETIC-J module and the existing code (its internal plasma current replaced with the output of the module) converges to the kinetic solution. Since KINETIC-J does not use the k-space representation of the hot plasma dielectric, in favor of data parallel numeric integrals, implementing the module requires minimal code changes.

Green, David L↗

Structural and dielectric properties of Ba{sub 2}LaSbO{sub 6} ceramics

The ceramic Ba{sub 2}LaSbO{sub 6} (BLS) is synthesized by the solid state reaction technique. The Rietveld refinement of X-ray diffraction pattern at room temperature shows Monoclinic P2{sub 1}/n space group symmetry with lattice parameter a = 6.0720 (0) Å, b = 6.1058 (3) Å, c = 8.6016 (6) Å and β =89.7091 ° (8). Dielectric study of sample has been performed in the temperature range from 30 °C to 300 °C in the frequency range 50 Hz to 1.1 MHz. Dielectric relaxation peaks are observed in the imaginary part of complex permittivity of the spectra. The frequency dependence of real and imaginary parts of dielectric permittivity is analyzed using Cole-Cole model. The temperature dependent relaxation time is found to obey the Arrhenius law having activation energy 0.48 eV which indicates that the conduction mechanism in the materials may be due to polaron hopping based on electron carriers. The complex plane plots of BLS shows the presence of both grain and grain boundary effects. Conductivity spectra follow the power law.

36 MATERIALS SCIENCE↗

Vestibular and Non-vestibular Contributions to Eye Movements that Compensate for Head Rotations during Viewing of Near Targets

We studied horizontal eye movements induced by en-bloc yaw rotation, over a frequency range 0.2 - 2.8 Hz, in 10 normal human subjects as they monocularly viewed a target located at their near point of focus. We measured gain and phase relationships between eye-in-head velocity and head velocity when the near target was either earth-fixed or head-fixed. During viewing of the earth-fixed near target, median gain was 1.49 (range 1.24 - 1.87) at 0.2 Hz for the group of subjects, but declined at higher frequencies, so that at 2.8 Hz median gain was 1.08 (range 0.68 - 1.67). During viewing of the head-fixed near target , median gain was 0.03 (range 0.01 - 0.10) at 0.2 Hz for the group of subjects, but increased at higher frequencies, so that at 2.8 Hz median gain was 0.71 (range 0.28 - 0.94). We estimated the vestibular contribution to these responses vestibulo-ocular reflex gain (Gvor) by applying transient head perturbations (peak acceleration> 1,000 deg/s(exp 2)) during sinusoidal rotation under the two viewing conditions. Median Gvor, estimated < 70ms after the onset of head perturbation, was 0.98 (range 0.39 - 1.42) while viewing the earth-fixed near target, and 0.97 (range 0.37 - 1.33) while viewing the head-fixed near target. For the group of subjects, 9 out of 10 subjects showed no significant difference of Gvor between the two viewing conditions ( p > 0.053 ) at all test frequencies. Since Gvor accounted for only -73% of the overall response gain during viewing of the earth-fixed target, we investigated the relative contributions of non-vestibular factors. When subjects viewed the earth-fixed target under strobe illumination, to eliminate retinal image slip information, the gain of compensatory eye movements declined compared with viewing in ambient room light. During sum-of-sine head rotations, while viewing the earth-fixed target, to Han et al./VOR during near-viewing minimize contributions from predictive mechanisms, gain also declined Nonetheless, simple superposition of smooth-pursuit tracking of sinusoidal target motion could not fully account for the overall response at higher frequencies, suggesting other nonvestibular contributions. During binocular viewing conditions when vergence angle was significantly greater than monocular viewing (p < 0.00l), the gain of compensatory eye movements did not show proportional change; indeed, gain could not be correlated with vergence angle during monocular or binocular viewing. We conclude that several separate factors contribute to generate eye rotations during sinusoidal yaw head rotations while viewing a near target; these include the VOR, visual-tracking eye movements that utilize retinal image motion, predictive eye movements and, possibly, other unidentified non-vestibular factors. For these experiments, vergence was not an important determinant of response gam.

Han, Yanning H.↗

Electron Landau damping in toroidal plasma with Solov’ev equilibrium

The contribution of untrapped and two groups of trapped particles to the longitudinal (with respect to the magnetic field) elements of the dielectric susceptibility is determined by solving the drift-kinetic equations for such particles in axisymmetric tokamaks with Solov’ev equilibrium. The obtained dielectric characteristics are applicable for studying linear wave processes in the frequency range of Alfvén and fast magnetosonic waves in small- and large-aspect-ratio tokamaks with circular, elliptical, and D-shaped cross sections of magnetic surfaces. The high-frequency power absorbed in plasma via electron Landau damping is estimated by summing up terms containing the imaginary parts of both diagonal and non-diagonal elements of the longitudinal susceptibility. The imaginary part of the longitudinal susceptibility is calculated numerically for spherical tokamaks in a wide range of wave frequencies and magnetic surface radii.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of Sm doping on structural and dielectric properties of Y{sub 1-x}Sm{sub x}MnO{sub 3} (x = 0, 0.10, 0.20) manganites

Structural and dielectric properties of polycrystalline YMnO{sub 3} (x = 0.0, 0.10 and 0.20) which was prepared by solid-state reaction route, have been investigated. The X-ray diffraction pattern reveals that all the samples are in single phase and show hexagonal structure with P63cm space group. The particle size decreases with increase in Sm doping while to that X-ray density increases with increasing x. The dielectric constant (ε’) of Y{sub 1-x}Sm{sub x}MnO{sub 3} measured in the frequency range 10 Hz to 1MHz is much higher at lower frequencies (≤ 1KHz) and its value decreases with enhanced frequency. At very high frequencies, ε’ becomes frequency independent and is attributed to Maxwell Wagner type of interfacial polarization model. A very high value of dielectric constant ∼18642 is observed for x = 10%. The dielectric loss (tan δ) decreases wit increase in Sm doping.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

First results from the Clark Lake Multifrequency Radioheliograph

The characteristics of the Clark Lake Multifrequency Radioheliograph, which is presently being used for solar research in the frequency range 20-125 MHz, are examined and several solar maps obtained with this instrument are presented. Two-dimensional images of the sun's corona at several frequencies within this range are examined, which were obtained with time resolution as good as 1.28 s. It is found that the shape of the sun's outer corona as observed at meter-decameter wavelengths appears to change in time periods as short as a few seconds.

Kundu, M. R.↗

Magnetic and dielectric behavior of chromium substituted Co-Mg ferrite nanoparticles

The chromium doped Co-Mg ferrite with composition Co{sub 0.5}Mg{sub 0.5}Cr{sub 0.2}Fe{sub 1.8}O{sub 4} has been synthesized using sol-gel auto combustion method. The crystal structure has been analyzed by X-ray diffraction (XRD) technique. XRD pattern reveals the formation of single phase cubic spinel structure. The magnetic measurements show ferromagnetic behavior at room temperature and large coercivity is observed on cooling down the temperature to 20 K. Dielectric constant (ε’) and dielectric loss tangent (tan δ) have been determined at room temperature as a function of frequency in the frequency range 75 kHz to 80 MHz. The decrease in dielectric constant with increasing frequency attributes to Maxwell Wagner model and conduction mechanism in ferrites.

36 MATERIALS SCIENCE↗

Temperature-dependent optical properties of Cd(1-x),Zn(x),Te substitute material

In this study, we report cryogenic optical properties of Cd(l-x), Zn(x), Te wafers that are used as substrate seed layers in the manufacturing of HgCdTe focal-plane array detectors. These studies are motivated by the fact that the substrate optical properties influence the overall detector performance. The studies consist of measuring the substrate frequency dependent transmittance T(W) and reflectance R(W) above and below the optical band-gap in the UV/Visible and infrared frequency ranges, and with temperature variation of the sample from 5 to 300 K. Determination of the optical absorption from these measurements show that the optical absorption energy gap near 1.6 eV shows a substantial increase as the temperature is reduced from 300 to 5 K. Furthermore, we observe the presence of infrared-active optical phonons whose peak frequency shifts as the temperature of the sample is varied over the measured temperature range. The theoretical frequency dependent optical conductivity, with allowance for redistribution of spectral weight among the interband transition charge carriers, will be discussed.

Quijada, Manuel A.↗

DETECTION OF HIGH-DEGREE PROGRADE SECTORAL MODE SEQUENCES IN THE A-STAR KIC 8054146?

This paper examines the 46 frequencies found in the {delta} Sct star KIC 8054146 involving a frequency spacing of exactly 2.814 cycles day{sup -1} (32.57 {mu}Hz), which is also a dominant low-frequency peak near or equal to the rotational frequency. These 46 frequencies range up to 146 cycles day{sup -1}. Three years of Kepler data reveal distinct sequences of these equidistantly spaced frequencies, including the basic sequence and side lobes associated with other dominant modes (i.e., small amplitude modulations). The amplitudes of the basic sequence show a high-low pattern. The basic sequence follows the equation f{sub m} = 2.8519 + m*2.81421 cycles day{sup -1} with m ranging from 25 to 35. The zero-point offset and the lack of low-order harmonics eliminate an interpretation in terms of a Fourier series of a non-sinusoidal light curve. The exactness of the spacing eliminates high-order asymptotic pulsation. The frequency pattern is not compatible with simple hypotheses involving single or multiple spots, even with differential rotation. The basic high-frequency sequence is interpreted in terms of prograde sectoral modes. These can be marginally unstable, while their corresponding low-degree counterparts are stable due to stronger damping. The measured projected rotation velocity (300 km s{sup -1}) indicates that the star rotates with {approx}>70% of the Keplerian break-up velocity. This suggests a near equator-on view. We qualitatively examine the visibility of prograde sectoral high-degree g-modes in integrated photometric light in such a geometrical configuration and find that prograde sectoral modes can reproduce the frequencies and the odd-even amplitude pattern of the high-frequency sequence.

79 ASTRONOMY AND ASTROPHYSICS↗

De-convolution of bulk and interfacial contributions based on impedance spectroscopy with external load resistance

De-convolution of impedance spectra is often ambiguous, mainly due to overlapped contributions, or when a prevailing interfacial contribution raises uncertainties about much smaller bulk contributions at higher frequencies. This can be avoided by performing impedance spectroscopy with a parallel external load resistance, which might exert selective decrease in interfacial contributions, with much smaller changes on high frequency contributions. By suitable selection of a parallel load resistance one obtained clearer interpretation for incompletely resolved high capacitance contributions, especially when the frequency range of the equipment does not reach sufficiently low frequencies. This method is discussed in detail and applied to de-convolution of impedance spectra of selected study cases. This includes ionic, or mixed conductors based on Yb{sub 2}Ti{sub 2}O{sub 7}, CGO and strontium titanate. One also provides guidelines for selection of suitable ranges of external resistors.

36 MATERIALS SCIENCE↗

Widely tunable room temperature semiconductor terahertz source

We present a widely tunable, monolithic terahertz source based on intracavity difference frequency generation within a mid-infrared quantum cascade laser at room temperature. A three-section ridge waveguide laser design with two sampled grating sections and a distributed-Bragg section is used to achieve the terahertz (THz) frequency tuning. Room temperature single mode THz emission with a wide tunable frequency range of 2.6–4.2 THz (∼47% of the central frequency) and THz power up to 0.1 mW is demonstrated, making such device an ideal candidate for THz spectroscopy and sensing.

36 MATERIALS SCIENCE↗