Search NASA⌕ Search

SEARCH · Search NASA

Results for “full scale testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

NASA broadened-specification fuels combustion technology program

The broadened-Specification Fuels Combustion Technology program's purpose is to evolve and demonstrate the technology required to enable current and next generation high-thrust, high-bypass-ratio turbofan engines to use fuels with broadened properties and to verify the evolved technology in full scale engine tests. The three phases of the program are combustor concept screening, combustor optimization testing, and engine verification testing. Constraints for designing combustion systems are outlined and problems to be expected in the use of broadened properties fuels are listed.

Fear, J. S.↗
NASA NTRS1980

NASA Broad-Specification Fuels Combustion Technology Program - Status and description

The use of 'broad-specification' fuels in aircraft gas turbine engines can be a significant factor in offsetting anticipated shortages of current-specification jet fuel in the latter part of the century. The changes in fuel properties accompanying the use of broad-specification fuels will tend to cause numerous emissions, performance, and durability problems in currently-designed combustion systems. The NASA Broad-Specification Fuels Combustion Technology Program is a contracted effort to evolve and demonstrate the technology required to utilize broad-specification fuels in current and next generation commercial Conventional Takeoff and Landing (CTOL) aircraft engines, and to verify this technology in full-scale engine tests in 1983. The program consists of three phases: Combustor Concept Screening, Combustor Optimization Testing, and Engine Verification Testing.

Fear, J. S.↗
NASA NTRS1981

Thin film strain transducer

Previous attempts to develop an appropriate sensor for measuring the stress or strain of high altitude balloons during flight are reviewed as well as the various conditions that must be met by such a device. The design, development and calibration of a transducer which promises to satisfy the necessary design constraints are described. The thin film strain transducer has a low effective modulus so as not to interfere with the strain that would naturally occur in the balloon. In addition, the transducer has a high sensitivity to longitudinal strain (7.216 mV/V/unit strain) which is constant for all temperature from room temperature to -80 C and all strains from 5 percent compression to 10 percent tensile strain. At the same time, the sensor is relatively insensitive (0.27 percent) to transverse forces. The device has a standard 350 ohm impedance which is compatible with available bridge balance, amplification and telemetry instrumentation now available for balloon flight. Recommendations are included for improved coatings to provide passive thermal control as well as model, tethered and full scale flight testing.

Rand, J. L.↗
NASA NTRS1981

The design and development of a mixer compound exhaust system for a quiet clean general aviation turbofan

Lower engine fuel consumption has become a dominant factor in turbofan engine design due to rapidly increasing fuel costs. One engine component with a large impact on engine performance is the exhaust system. Previous exhaust system studies have demonstrated the significant exhaust system efficiency gains available through mixing of the core and bypass flows. Typically, a large, costly rig and engine program are required to develop and optimize these gains. The purpose of this paper is to present the results of the low-cost design system used for the quiet, clean general aviation turbofan mixer nozzle design and development. The scale model and full-scale engine test results confirm the predicted 3 to 5% reduction in cruise fuel consumption. This unique design system, which is based on integrating advanced three-dimensional viscous numerical methods with empirical optimization techniques, is summarized and detailed comparisons with test data are presented. The ability to accurately predict relative performance of mixer systems with substantially reduced development time and cost savings is demonstrated.

Blackmore, W. L.↗
NASA NTRS1983

JT150 1/2-scale nozzle jet noise experiment and comparison with prediction

As part of a program to study flight effects on the exhaust noise of a full scale JT15D engine, static half scale model jet noise experiments were conducted. Acoustic data were recorded for microphone angles of 45 deg to 155 deg with jet conditions for the model scale nozzle corresponding closely to those at 55, 73 and 97 percent of corrected rated speed for the full scale engine. These data are useful for determining the relative importance of jet and core noise in the static full scale engine test data and will in turn allow for a proper evaluation of flight effects on the exhaust noise results. The model scale data are also compared with the coaxial jet noise prediction. Above 1000 Hz, the prediction is nominally 0 to 3 dB higher than the data. The arithmetic mean of the differences between the experimental OASPL and the predicted OASPL for all angles for each run ranged from 0 to -3.2 dB. The standard deviation of all the OASPL differences is 2.2 dB. The discrepancies are greatest at low primary jet velocities and appear to be due to inadequacy in the variable jet density exponent incorporated in the prediction procedure.

Groesbeck, D. E.↗
NASA NTRS1979

Advanced composite elevator for Boeing 727 aircraft

Detail design activities are reported for a program to develop an advanced composites elevator for the Boeing 727 commercial transport. Design activities include discussion of the full scale ground test and flight test activities, the ancillary test programs, sustaining efforts, weight status, and the production status. Prior to flight testing of the advanced composites elevator, ground, flight flutter, and stability and control test plans were reviewed and approved by the FAA. Both the ground test and the flight test were conducted according to the approved plan, and were witnessed by the FAA. Three and one half shipsets have now been fabricated without any significant difficulty being encountered. Two elevator system shipsets were weighed, and results validated the 26% predicted weight reduction. The program is on schedule.

Source record↗
NASA NTRS1983

A preliminary damage tolerance methodology for composite structures

The certification experience for the primary, safety-of-flight composite structure applications on the F-16 is discussed. The rationale for the selection of delamination as the major issue for damage tolerance is discussed, as well as the modeling approach selected. The development of the necessary coupon-level data base is briefly summarized. The major emphasis is on the description of a full-scale fatigue test where delamination growth was obtained to demonstrate the validity of the selected approach. A summary is used to review the generic features of the methodology.

Wilkins, D. J.↗
NASA NTRS1982

Fabrication of bonded graphite/polyimide structures for advanced aerospace applications

The tooling concepts and manufacturing techniques developed to produce subelements and full-scale bonded test articles for two of the NASA Composites for Advanced Transportation Systems are examined as part of the structural development of graphite/polyimide composite material systems for the Space Shuttle Orbiter and other space transportation systems. The subassembly and the assembly bonding of the test articles were accomplished using self-tooling and low-cost aluminum tooling concepts in order to eliminate the need for complex and expensive tools. Processing procedures and tooling approaches were developed which permit controlled pressure application on specific bonding planes. Two test articles were fabricated using these techniques, an acoustic panel and a quarter segment of the Space Shuttle aft body flap.

Frost, R. K.↗
NASA NTRS1984

Survey of NASA research on crash dynamics

Ten years of structural crash dynamics research activities conducted on general aviation aircraft by the National Aeronautics and Space Administration (NASA) are described. Thirty-two full-scale crash tests were performed at Langley Research Center, and pertinent data on airframe and seat behavior were obtained. Concurrent with the experimental program, analytical methods were developed to help predict structural behavior during impact. The effects of flight parameters at impact on cabin deceleration pulses at the seat/occupant interface, experimental and analytical correlation of data on load-limiting subfloor and seat configurations, airplane section test results for computer modeling validation, and data from emergency-locator-transmitter (ELT) investigations to determine probable cause of false alarms and nonactivations are assessed. Computer programs which provide designers with analytical methods for predicting accelerations, velocities, and displacements of collapsing structures are also discussed.

Thomson, R. G.↗
NASA NTRS1985

Predicting Effects of Impacts on Confined Explosives

Study aimed at improving safety of explosive storage examined relationship between small-scale experiments and actual explosions. Object of study to develop scaling laws that eliminate need for full-scale explosion tests and reduce need for small-scale tests. Results of study make it possible to predict explosive behavior from small tests and numerical simulation.

Chan, C. K.↗
NASA NTRS1984

A review and analysis of boundary layer transition data for turbine application

A symposium on transition in turbines was held at the NASA Lewis Research Center. One recommendation of the working groups was the collection of existing transition data to provide standard cases against which models could be tested. A number of data sets from the open literature that include heat transfer data in apparently transitional boundary layers, with particular application to the turbine environment, were reviewed and analyzed to extract transition information from the heat transfer data. The data sets reviewed cover a wide range of flow conditions, from low speed, flat plate tests to full scale turbine airfoils operating at simulated turbine engine conditions. The results indicate that free stream turbulence and pressure gradient have strong, and opposite, effects on the location of the start of transition and on the length of the transition zone.

Gaugler, R. E.↗
NASA NTRS1985

Bearings working group

The service life of the Space Shuttle Main Engine (SSME) turbomachinery bearings was a predominant factor in engine durability and maintenance problems. Recent data has indicated that bearing life is about one order of magnitude lower than the goal of seven and one-half hours particularly those in the High Pressure Oxidizer Turbopump (HPOTP). Bearing technology, primarily cryogenic turbomachinery bearing technology, is expanded by exploring the life and performance effects of design changes; design concept changes; materials changes; manufacturing technique changes; and lubrication system changes. Each variation is assessed against the current bearing design in full scale cryogenic tests.

Source record↗
NASA NTRS1985

Design and construction of models for the National Transonic Facility, part 1

The design and construction of models for the National Transonic Facility (NTF) has resulted in significant technology developments in many areas. This lecture covers the development of design criteria and major research and development work that has contributed to the successful design and fabrication models for testing at full scale Reynolds number the NTF. Emphasis is placed on the materials aspect of the design and fabrication proces, including metallic materials, mechanical properties characterization, new steel alloy development, fracture toughness enhancement, and identification of fillers and solders suitable for use in cryogenic models. Quantitative data are provided which will be of value to the potential user of NTF or for application to the design and fabrication of model systems for other cryogenic wind tunnels.

Young, C. P., Jr.↗
NASA NTRS1985

A review and analysis of boundary layer transition data for turbine application

A symposium on transition in turbines was held at the NASA Lewis Research Center. One recommendation of the working groups was the collection of existing transition data to provide standard cases against which models could be tested. A number of data sets from the open literature that include heat transfer data in apparently transitional boundary layers, with particular application to the turbine environment, were reviewed and analyzed to extract transition information from the heat transfer data. The data sets reviewed cover a wide range of flow conditions, from low speed, flat plate tests to full scale turbine airfoils operating at simulated turbine engine conditions. The results indicate that free stream turbulence and pressure gradient have strong, and opposite, effects on the location of the start of transition and on the length of the transition zone.

Gaugler, R. E.↗
NASA NTRS1986

Piloted simulation study of the effects of an automated trim system on flight characteristics of a light twin-engine airplane with one engine inoperative

A simulation study was conducted to investigate the piloting problems associated with failure of an engine on a generic light twin-engine airplane. A primary piloting problem for a light twin-engine airplane after an engine failure is maintaining precise control of the airplane in the presence of large steady control forces. To address this problem, a simulated automatic trim system which drives the trim tabs as an open-loop function of propeller slipstream measurements was developed. The simulated automatic trim system was found to greatly increase the controllability in asymmetric powered flight without having to resort to complex control laws or an irreversible control system. However, the trim-tab control rates needed to produce the dramatic increase in controllability may require special design consideration for automatic trim system failures. Limited measurements obtained in full-scale flight tests confirmed the fundamental validity of the proposed control law.

Stewart, E. C.↗
NASA NTRS1986

Heat pipe cooled rocket engines

A concept for a heat-pipe-cooled rocket engine, which involves the use of heat pipes to augment radiation cooling on small, low-flux rocket engines used for attitude control and stationkeeping on satellites, is discussed. Results of the thermal and performance analyses performed on a prototype heat cooled thrust chamber are presented, together with the results of fabrication experiments. A test plan for full-scale hot fire hardware testing is outlined.

Berkman, D. K.↗
NASA NTRS1988

A comparison of theory and experiment for coupled rotor body stability of a bearingless rotor model in hover and forward flight

Seven cases were selected for correlation from a 1/5.86 Froude-scale experiment that examined several rotor designs which were being considered for full-scale flight testing as part of the Bearingless Main Rotor (BMR) program. The model rotor hub used in these tests consisted of back-to-back C-beams as flexbeam elements with a torque tube for pitch control. The first four cases selected from the experiment were hover tests which examined the effects on rotor stability of variations in hub-to-flexbeam coning, hub-to-flexbeam pitch, flexbeam-to-blade coning, and flexbeam-to-blade pitch. The final three cases were selected from the forward flight tests of optimum rotor configuration as defined during the hover test. The selected cases examined the effects of variations in forward speed, rotor speed, and shaft angle. Analytical results from Bell Helicopter Textron, Boeing Vertol, Sikorsky Aircraft, and the U.S. Army Aeromechanics Laboratory were compared with the data and the correlations ranged from poor-to-fair to fair-to-good.

Mirick, Paul H.↗
NASA NTRS1988

Proposed modifications to ice accretion/icing scaling theory

The difficulty of conducting full-scale icing tests has long been appreciated. Testing in an icing wind tunnel has been undertaken for decades. While aircraft size and speeds have increased, tunnel facilities have not, thus making subscale geometric tests a necessity. Scaling laws governing these tests are almost exclusively based on analysis performed over 30 years ago and have not been rigorously validated. The following work reviews past scaling analyses and suggests revision to these analyses based on recent experimental observation. It is also suggested, based on the analysis contained herein, that current ice accretion predictive technologies, such as LEWICE when utilized in the glaze ice accretion regime, may need upgrading to more accurately estimate the rate of ice build-up on aerodynamic surfaces.

Bilanin, Alan J.↗