Search NASA⌕ Search

SEARCH · Search NASA

Results for “generic model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Generic icing effects on forward flight performance of a model helicopter rotor

An experimental program using a commercially available model helicopter has been conducted in the TAMU 7 ft x 10 ft Subsonic Wind Tunnel to investigate main rotor performance degradation due to generic ice adhesion. Base and iced performance data were gathered as functions of fuselage incidence, blade collective pitch, main rotor rotational velocity, and freestream velocity. The experimental values have shown that, in general, the presence of generic ice introduces decrements in performance caused by leading edge separation regions and increased surface roughness. In addition to the expected changes in aerodynamic forces caused by variations in test Reynolds number, forward flight data seemed to be influenced by changes in freestream and rotational velocity. The dependence of the data upon such velocity variations was apparently enhanced by increases in blade chord.

Tinetti, Ana F.↗

Nonviolent nonlocality

If quantum mechanics governs nature, black holes must evolve unitarily, providing a powerful constraint on the dynamics of quantum gravity. Such evolution apparently must in particular be nonlocal, when described from the usual semiclassical geometric picture, in order to transfer quantum information into the outgoing state. Additionally, while such transfer from a disintegrating black hole has the dangerous potential to be violent to generic infalling observers, this paper proposes the existence of a more innocuous form of information transfer, to relatively soft modes in the black hole atmosphere. Simplified models for such nonlocal transfer are described and parameterized, within a possibly more basic framework of a Hilbert tensor network. Sufficiently sensitive measurements by infalling observers may detect departures from Hawking's predictions, and in generic models black holes decay more rapidly. Lastly, constraints of consistency -- internally and with known and expected features of physics -- restrict the form of information transfer, and should provide important guides to discovery of the principles and mechanisms of the more fundamental nonlocal mechanics.

79 ASTRONOMY AND ASTROPHYSICS↗

Electric Drive Dynamic Thermal System Model for Advanced Vehicle Propulsion Technologies: Cooperative Research and Development Final Report, CRADA Number CRD-09-360

Electric drive systems, which include electric machines and power electronics, are a key enabling technology for advanced vehicle propulsion systems that reduce the dependence of the U.S. transportation sector on petroleum. However, to penetrate the market, these electric drive technologies must enable vehicle solutions that are economically viable. The push to make critical electric drivesystems smaller, lighter, and more cost-effective brings respective challenges associated with heat removal and system efficiency. In addition, the wide application of electric drive systems to alternative propulsion technologies ranging from integrated starter generators, to hybrid electric vehicles, to full electric vehicles presents challenges in terms of sizing critical components andthermal management systems over a range of in-use operating conditions. This effort focused on developing a modular modeling methodology to enable multi-scale and multi-physics simulation capabilities leading to generic electric drive system models applicable to alternative vehicle propulsion configurations. The primary benefit for the National Renewable Energy Laboratory (NREL) is the abilityto define operating losses with the respective impact on component sizing, temperature, and thermal management at the component, subsystem, and system level. However, the flexible nature of the model also allows other uses related to evaluating the impacts of alternative component designs or control schemes depending on the interests of other parties.

33 ADVANCED PROPULSION SYSTEMS↗

A 1D–0D–3D coupled model for simulating blood flow and transport processes in breast tissue

In this work, we present mixed dimensional models for simulating blood flow and transport processes in breast tissue and the vascular tree supplying it. These processes are considered, to start from the aortic inlet to the capillaries and tissue of the breast. Large variations in biophysical properties and flow conditions exist in this system necessitating the use of different flow models for different geometries and flow regimes. In total, we consider four different model types. First, a system of 1D nonlinear hyperbolic partial differential equations (PDEs) is considered to simulate blood flow in larger arteries with highly elastic vessel walls. Second, we assign 1D linearized hyperbolic PDEs to model the smaller arteries with stiffer vessel walls. The third model type consists of ODE systems (0D models). It is used to model the arterioles and peripheral circulation. Finally, homogenized 3D porous media models are considered to simulate flow and transport in capillaries and tissue within the breast volume. Sink terms are used to account for the influence of the venous and lymphatic systems. Combining the four model types, we obtain two different 1D–0D–3D coupled models for simulating blood flow and transport processes: The first model results in a fully coupled 1D–0D–3D model covering the complete path from the aorta to the breast combining a generic arterial network with a patient specific breast network and geometry. The second model is a reduced one based on the separation of the generic and patient specific parts. The information from a calibrated fully coupled model is used as inflow condition for the patient specific sub-model allowing a significant computational cost reduction. Several numerical experiments are conducted to calibrate the generic model parameters and to demonstrate realistic flow simulations compared to existing data on blood flow in the human breast and vascular system. Moreover, we use two different breast vasculature and tissue data sets to illustrate the robustness of our reduced sub-model approach.

multiscale blood flow models↗

Constraining f(R) gravity models with disappearing cosmological constant

The f(R) gravity models proposed by Hu-Sawicki and Starobinsky are generic for local gravity constraints to be evaded. The large deviations from these models result in either violation of local gravity constraints or the modifications indistinguishable from cosmological constant. The curvature singularity in these models is generic but can be avoided, provided that proper fine-tuning is imposed on the evolution of scalaron in the high curvature regime. In principle, the problem can be circumvented by incorporating quadratic curvature correction in the Lagrangian, though it might be quite challenging to probe the relevant region numerically.

79 ASTRONOMY AND ASTROPHYSICS↗

Mechanistic modeling of CO 2 well leakage in a generic abandoned well through a bridge plug cement-casing gap

Both known and unmapped plugged and abandoned wells are potential leakage pathways for CO 2 from geologic carbon sequestration (GCS) sites. Although many abandoned wells have cement bridge plugs installed to prevent leakage, the seal between the cement and the inner casing wall is subject to failure. In this study, we carried out detailed T2Well simulations of cases of sudden non-Darcy flow of CO 2 and brine leakage up the gap between a cement plug and the inner steel casing wall that becomes a fully connected flow path during the post-injection period. The goal of our study was two-fold: (1) to understand the dynamics, rates, and the characteristic temporal signals associated with the onset of leakage through various gap-aperture sizes, and (2) to suggest potential monitoring strategies based on the findings. Simulation results show that the leakage of CO 2 and brine upward is transient with interesting phase interference behavior. Time-dependent oscillatory flows with varying pressure, temperature, and flow rates of CO 2 and brine show strong dependence on gap aperture. Phase-change and decompression lead to very low temperatures at the top of the well for gap apertures larger than 4 mm suggesting that remote thermal monitoring at the ground surface may be an effective way of monitoring even if well locations are not known a priori. Pressure in the well is also indicative of CO 2 leakage. The temporal patterns of changing temperature and pressure may be useful diagnostic signals for leakage detection. Finally, these transient leakage signals may provide information on the cause of leakage and/or characteristics of the flow path that could inform effective remediation design and execution approaches.

58 GEOSCIENCES↗

Species Transport Framework Development in SAM for System-Level Tritium Source Term Analysis

The SAM code is under development as a modern system-level modeling and simulation tool for advanced non–light water reactor safety analyses, with recent efforts to add capabilities to evaluate radiological source term risks in these novel reactor concepts. By leveraging the established system-level multiphysics thermal-hydraulic models in SAM, a framework for tightly coupled species transport modeling has been integrated into the code for engineering-scale source term evaluation. This species transport framework was first applied to the simulation of tritium, which is a well-known source term in conventional light water reactors. Tritium poses a unique risk in salt-cooled reactors, especially those with lithium-bearing salts such as the fluoride salt–cooled high-temperature reactor (FHR) concept, as tritium is generated in the salt coolant in significant quantities due to neutron interactions. A compounding factor is the increased mobility of tritium at high temperatures, which is able to permeate through metals while also potentially being retained in graphite pebbles and structures. Engineering-scale models for the tritium transport pathways in a FHR have been developed using the new species transport framework in SAM. The capabilities are assessed through analytical verification problems and validated with data from a graphite retention experiment. In conclusion, the system-level model is demonstrated by performing an initial estimate of baseline tritium generation and flows in a generic reference SAM FHR model, setting a foundation for future studies of source term transient analysis with the potential for further multiscale and multiphysics integration.

SAM↗

Reference Model MHK Turbine Array Optimization Study within a Generic River System.

Increasing interest in marine hydrokinetic (MHK) energy has spurred to significant research on optimal placement of emerging technologies to maximize energy conversion and minimize potential effects on the environment. However, these devices will be deployed as an array in order to reduce the cost of energy and little work has been done to understand the impact these arrays will have on the flow dynamics, sediment-bed transport and benthic habitats and how best to optimize these arrays for both performance and environmental considerations. An "MHK-friendly" routine has been developed and implemented by Sandia National Laboratories (SNL) into the flow, sediment dynamics and water-quality code, SNL-EFDC. This routine has been verified and validated against three separate sets of experimental data. With SNL-EFDC, water quality and array optimization studies can be carried out to optimize an MHK array in a resource and study its effects on the environment. The present study examines the effect streamwise and spanwise spacing has on the array performance. Various hypothetical MHK array configurations are simulated within a trapezoidal river channel. Results show a non-linear increase in array-power efficiency as turbine spacing is increased in each direction, which matches the trends seen experimentally. While the sediment transport routines were not used in these simulations, the flow acceleration seen around the MHK arrays has the potential to significantly affect the sediment transport characteristics and benthic habitat of a resource. Evaluation Only. Created with Aspose.Pdf.Kit. Copyright 2002-2011 Aspose Pty Ltd Evaluation Only. Created with Aspose.Pdf.Kit. Copyright 2002-2011 Aspose Pty Ltd

54 ENVIRONMENTAL SCIENCES↗

Ontology Language to Support Description of Experiment Control System Semantics, Collaborative Knowledge-Base Design and Ontology Reuse

In this paper we discuss the control domain specific ontology that is built on top of the domain-neutral Resource Definition Framework (RDF). Specifically, we will discuss the relevant set of ontology concepts along with the relationships among them in order to describe experiment control components and generic event-based state machines. Control Oriented Ontology Language (COOL) is a meta-data modeling language that provides generic means for representation of physics experiment control processes and components, and their relationships, rules and axioms. It provides a semantic reference frame that is useful for automating the communication of information for configuration, deployment and operation. COOL has been successfully used to develop a complete and dynamic knowledge-base for experiment control systems, developed using the AFECS framework.

43 PARTICLE ACCELERATORS↗

Mechanism to support generic collective communication across a variety of programming models

A system and method for supporting collective communications on a plurality of processors that use different parallel programming paradigms, in one aspect, may comprise a schedule defining one or more tasks in a collective operation, an executor that executes the task, a multisend module to perform one or more data transfer functions associated with the tasks, and a connection manager that controls one or more connections and identifies an available connection. The multisend module uses the available connection in performing the one or more data transfer functions. A plurality of processors that use different parallel programming paradigms can use a common implementation of the schedule module, the executor module, the connection manager and the multisend module via a language adaptor specific to a parallel programming paradigm implemented on a processor.

97 MATHEMATICS AND COMPUTING↗

Unit-density SU(3) Fermi-Hubbard model with spin-flavor imbalance

The advent of ultracold alkaline-earth atoms in optical lattices has established a platform for investigating correlated quantum matter with SU⁡(𝑁) symmetry, offering highly tunable model parameters that allow experiments to access phenomena that are unavailable in conventional materials. Understanding the ground-state physics of SU⁡(𝑁) Fermi-Hubbard models away from the Heisenberg limit and from the spin-flavor balanced setting is important, as examining the flavor imbalance reveals new physics in Fermi-Hubbard models and shows how SU⁡(𝑁) phases react to practical experimental imperfections in optical lattices. Here, in this study, mean-field phase diagrams are presented for the unit-density SU(3) Fermi-Hubbard model at two sets of flavor densities, ($\frac{1}{3}$ − 𝛿, $\frac{1}{3}$ + 𝛿, $\frac{1}{3}$) and ($\frac{1}{4}$ − 𝛿, $\frac{1}{4}$ +𝛿, $\frac{1}{2}$), with the flavor imbalance introduced as 𝛿. Novel phases are identified at moderate interaction strengths for both densities, and their robustness is investigated in the presence of flavor imbalance. Furthermore, we provide microscopic explanations of the phases found and their stability. Analysis of thermal ensembles of random mean-field solutions indicate that, at temperatures accessible in state-of-the-art cold atom experiments, some spin orders are hard for conventional scattering or local observable measurements to detect, but can be more accessible with quantum gas microscopy in optical lattice experiments. This work also shows that nesting and Mottness, intertwined in the usual SU(2) Hubbard model in stark contrast to generic materials, can be tuned in the SU(3) model and play distinct roles. The resulting phase diagrams not only deepen our understanding of SU⁡(𝑁) Fermi-Hubbard models but also inform future experimental search for new phases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic phases of spin-(3/2) fermions on a spatially anisotropic square lattice

We study the magnetic phase diagram of spin-(3/2) fermions in a spatially anisotropic square optical lattice at quarter filling (corresponding to one particle per lattice site). In the limit of the large on-site repulsion the system can be mapped to the so-called Sp(N) Heisenberg spin model with N=4. We analyze the Sp(N) spin model with the help of the large-N field-theoretical approach and show that the effective theory corresponds to the Sp(N) extension of the CP{sup N-1} model, with the Lorentz invariance generically broken. We obtain the renormalization flow of the model couplings and show that although the Sp(N) terms are seemingly irrelevant, their presence leads to a renormalization of the CP{sup N-1} part of the action, driving a phase transition. We further consider the influence of the external magnetic field (the quadratic Zeeman effect) and present the qualitative analysis of the ground-state phase diagram.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Molecular dynamics studies of knotted polymers

Molecular dynamics calculations have been used to explore the influence of knots on the strength of a polymer strand. In particular, the mechanism of breaking 31, 41, 51, and 52 prime knots has been studied using two very different models to represent the polymer: (1) the generic coarse-grained (CG) bead model of polymer physics and (2) a state-of-the-art machine learned atomistic neural network (NN) potential for polyethylene derived from electronic structure calculations. While there is a broad overall agreement between the results on the influence of the pulling rate on chain rupture based on the CG and atomistic NN models, for the simple 31 and 41 knots, significant differences are found for the more complex 51 and 52 knots. Notably, in the latter case, the NN model more frequently predicts that these knots can break not only at the crossings at the entrance/exit but also at one of the central crossing points. The relative smoothness of the CG potential energy surface also leads to stabilization of tighter knots compared to the more realistic NN model.

DelloStritto, Mark (ORCID:0000000206785860)↗

Adsorption Modeling at the Front and Back Ends of the Nuclear Fuel Cycle

Adsorption is a diverse and complex physicochemical process that has many different applications in chemical, environmental, and nuclear sciences. For example, adsorption can be found at both the front and back ends of the nuclear fuel cycle for (i) capturing uranium from seawater to use as a new source of nuclear fuel and (ii) treatment of the off-gases produced when reprocessing used nuclear fuel. Accurate modeling of these processes is important for the design of efficient capture, recovery, and removal systems for the particular aqueous or gaseous species of interest. A set of algorithms and methods designed for flexibility and portability will greatly improve the ability to rigorously model such a complex set of systems. This approach allows more specific models to be built upon the more generic methods, which gives the overall modeling effort larger breadth and greater usability. Due to the complexity of adsorption processes, it is necessary to develop relatively complex mechanistic models to accurately predict the behavior of engineered adsorption systems. Capture and recovery systems designed for nuclear energy need to have a high level of accuracy to reduce uncertainties and aid in the implementation of separations technologies for efficient nuclear energy systems. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Predicting Fractures In Fiber/Matrix Composites

NASA technical memorandum discusses status of emerging methodology of computational simulation of fractures in fiber/matrix composite structural components. Part of methodology consists of step-by-step procedures to simulate fractures in individual and mixed models in variety of generic composite-material components. Another part of methodology embodied in computer program CODSTRAN, which incorporates mathematical models of mechanical properties of composites and of fracture mechanics. Authors assert methodology ready for widespread application.

Chamis, C. C.↗

A Scoping Study to Develop a Computational Fluid Dynamics Based Model to Predict Radiological Materials Packaging Temperatures within a Generic Staging Building

The objective of this work is to perform computational fluid dynamics simulations of a ventilated radiological-material-package staging building to determine the effect of including or excluding a variety of physical effects and computational methods on both the predicted package temperatures and required computational resources. The generic building contains 640 drum-packages containing heat-generating, radiological material supported on four racks that are eight levels tall. Additionally, there is a forced ventilation system, lighting, and insulated walls. Computational models were constructed that included or excluded (a) shelving, (b) effects of unsteadiness, and (c) radiation heat transfer. Simulations with each drum modeled separately were compared to simpler simulations with sets of four drums represented by an equivalent box-package. These models employed between 106 to 107 elements. Steady state simulations predicted package temperatures that were within 0.1°C of simulations that included transient effects and required only one-eighth the computational resources. Calculations that excluded shelving predicted temperatures within 0.6°C of simulations that included shelving and required one-fourth the computational resources. Excluding radiation heat transfer systematically increased temperatures by around 1.5°C but reduced computational resources by a factor of four. The box-package model reduced the computational resources by a factor of 3, but systematically predicted higher temperatures by around 1.1°C. These results will be used to develop an efficient computational fluid dynamics model to assess the ability of different staging building designs to prevent the temperature of package components from exceeding specified limits.

42 ENGINEERING↗

Consequences of adsorbate-adsorbate interactions for apparent kinetics of surface catalytic reactions

Lateral adsorbate interactions at catalyst surfaces are known to influence adsorption energies and reaction rates. Lattice-based kinetic Monte Carlo (kMC) simulations are able to capture these influences, but such models are typically parameterized for a specific reaction network and catalyst surface. Here we report kMC simulations to probe the influence of lateral interactions on simulated rates, rate orders, apparent activation energies, and Sabatier plots. We construct a simple, two-step reaction network involving a single adsorbate and rate- limiting diatomic dissociation, employ a generic repulsive lateral interaction model consistent with known adsorbate-adsorbate interactions on metal surfaces, and a rate model consistent with known Brønsted-Evans-Polyani relationships for diatomic dissocations. Furthermore, we juxtapose reaction kinetics over a wide range of reaction conditions and catalyst binding energies, as a function of interaction strength. We find that at a given zero-coverage binding energy and external conditions, adsorbate coverage decreases monotonically with increasing interaction strength, but absolute rates can vary linearly or nonlinearly. Interactions flatten the Sabatier volcano and shift the maximum towards stronger binding. Influences on apparent rate orders and activation energies are modest and are sensitive to interaction-induced adsorbate ordering. Model predictions are sensitive to lattice size effects at high coverages. The results, modelled for a simple reaction system, highlight the generic consequences of lateral interactions and guidance for identifying their signatures in observed kinetics.

kinetic Monte Carlo↗