Search NASA⌕ Search

SEARCH · Search NASA

Results for “interface diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Incorporation of lead and titanium into a porous alumina membrane during Pb(Zr{sub 0.52}Ti{sub 0.48})O{sub 3} nanotube synthesis

We report the identification and characteristics of lead aluminate (Pb{sub 2}Al{sub 2}O{sub 5} or PbAl{sub 12}O{sub 19})/aluminum titanate (Al{sub 2}TiO{sub 5}) formed as a result of the interaction between a Pb(Zr{sub 0.52}Ti{sub 0.48})O{sub 3} (PZT) precursor and a porous alumina membrane (PAM) during PZT nanotube synthesis. The surface morphology and composition of PZT nanotubes were examined as a function of the etching time and annealing temperature, and the diffusion of elements over nanometer length scales during PZT nanotube formation was investigated based on analysis using field emission transmission electron microscopy, scanning transmission electron microscopy, and energy dispersive x-ray microscopy. As the annealing temperature increased, the volume of lead aluminate/aluminum titanate increased, suggesting that considerable diffusion of Pb and Ti occurred and, in turn, dramatically affected the nanotube characteristics. The diffusion of Pb and Ti was clearly evident, resulting in the formation of a distinct lead aluminate/aluminum titanate at the PZT nanotube/PAM interface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Understanding coarsening of a post-corrosion microstructure in a molten salt by combining phase-field modeling and in situ tomography

Alloys corroding in molten salt have been observed to form bicontinuous, nanoporous microstructures via dealloying, which subsequently undergo coarsening due to facile transport in high-temperature conditions. In this work, we describe a methodology to elucidate the underlying transport mechanisms during coarsening of a bicontinuous microstructure via quantitative comparisons between phase-field simulations and four-dimensional in situ experiments, in this case X-ray nanotomography of the coarsening of a dealloyed 80 wt% Ni-20 wt% Cr microwire in molten KCl-MgCl 2 at 800°C. We conduct phase-field simulations initialized from experimental data to model coarsening via three different transport mechanisms: surface diffusion, solid bulk diffusion, and liquid bulk diffusion. These simulations reproduce key features of the experiment, such as the densification of the outer layer of the dealloyed wire and the reduction in radius over time. We quantitatively compare different microstructural characteristics between the simulations and experiment and extract temporal scaling factors that optimally match the time scales of the simulations to that of the experiment. This allows us to evaluate morphological similarity between the simulations and experiment and relate the experimental coarsening kinetics to fundamental material properties. We find that surface diffusion is most likely to be the dominant coarsening mechanism, and its kinetics imply a surface diffusivity of D S = 8.9 x 10 -20 m 3 /s, which is within the range of reported values for Ni-vacuum interfaces at 800°C. However, the difference between the experiment and the surface diffusion simulation increases substantially at late times, suggesting that other mechanisms, such as the dissolution of residual Cr, may be at play.

36 MATERIALS SCIENCE↗

Engineering High- k /SiGe Interface with ALD Oxide for Selective GeO x Reduction

Suppression of electronic defects induced by GeO x at the high- k gate oxide/SiGe interface is critical for implementation of high-mobility SiGe channels in complementary metal-oxide-semiconductor (CMOS) technology. Theoretical and experimental studies have shown that a low defect density interface can be formed with an SiO x -rich interlayer on SiGe. Experimental studies in the literature indicate a better interface formation with Al 2 O 3 in contrast to HfO 2 on SiGe; yet, the mechanism behind this is not well understood. In this study, the mechanism of forming a low defect density interface between Al 2 O 3 /SiGe is discovered using atomic layer deposited (ALD) Al 2 O 3 insertion into or on top of ALD HfO 2 gate oxides. To elucidate the mechanism, correlations are made between the defect density determined by impedance measurements and the chemical and physical structures of the interface determined by high-resolution scanning transmission electron microscopy and electron energy loss spectroscopy. The compositional analysis reveals an SiO x rich interlayer for both Al 2 O 3 /SiGe and HfO 2 /SiGe interfaces with the insertion of Al 2 O 3 into or on top of the HfO 2 oxide. The data is consistent with the Al 2 O 3 insertion inducing decomposition of the GeO x from the interface to form an electrically passive, SiO x rich interface on SiGe. This mechanism demonstrates that nanolaminate gate oxide chemistry cannot be interpreted as resulting from a simple layer-by-layer ideal ALD process, because the precursor or its reaction products can diffuse through the oxide during growth and react at the semiconductor interface. This finding shows that in scaled CMOS, remote oxide ALD (oxide ALD on top of the gate oxide) can be used to suppress electronic defects at gate oxide semiconductor interfaces by oxygen scavenging.

36 MATERIALS SCIENCE↗

TiO 2 Microboxes with Controlled Internal Porosity for High‐Performance Lithium Storage

Abstract Titanium dioxide (TiO 2 ) is considered a promising anode material for high‐power lithium ion batteries (LIBs) because of its low cost, high thermal/chemical stability, and good safety performance without solid electrolyte interface formation. However, the poor electronic conductivity and low lithium ion diffusivity of TiO 2 result in poor cyclability and lithium ion depletion at high current rates, which hinder them from practical applications. Herein we demonstrate that hierarchically structured TiO 2 microboxes with controlled internal porosity can address the aforementioned problems for high‐power, long‐life LIB anodes. A self‐templating method for the synthesis of mesoporous microboxes was developed through Na 2 EDTA‐assisted ion exchange of CaTiO 3 microcubes. The resulting TiO 2 nanorods were organized into microboxes that resemble the microcube precursors. This nanostructured TiO 2 material has superior lithium storage properties with a capacity of 187 mAh g −1 after 300 cycles at 1 C and good rate capabilities up to 20 C.

Gao, Xuehui↗

Understanding LIB Battery Electrodes Through Classical Electrochemical Interface Theory

Classical models of the electrochemical interface can be applied to complex and dynamic electrodes to understand important mechanisms that are relevant to device-level phenomena like calendar aging or cycle life. Here, we show that negative alloy electrodes with wide electrochemical windows cannot be assumed to have static interfaces throughout all states of charge. Under high states of charge, the interface -including the solid electrolyte interphase - has characteristics that resemble a highly polarized electrode far from the point of zero charge. Under these conditions, the interface can be understood through the Helmholtz model. At lower states of charge, the interface capacitance decreases and the space charge layer length increases. This transformation resembles a metal electrode approaching the point of zero charge which is understood through the Gouy-Chapman-Stern-Grahame model of the electrochemical interface. This transformation happens at both silicon and carbon-coated silicon interfaces. From voltage-limited cycling experiments, in the limit of the diffuse double layer, the silicon electrode impedance rises significantly in the first few cycles. This rise is related to the continuous electrochemical reduction of electrolyte components from an interface that is not electronically screened from the electrolyte. In other words, an electrode interface for batteries should resemble a 'Helmholtz-like' structure.

anode↗

Precipitation-site competition in duplex stainless steels: Cu clusters vs spinodal decomposition interfaces as nucleation sites during thermal aging

Competing microstructural evolution mechanisms can exist simultaneously when duplex stainless steels are operating for several decades in a high temperature service environment. Such competition between different microstructural evolution pathways can be difficult to ascertain using simple model alloy systems necessitating detailed structural and compositional analysis of phase transformation mechanisms in complex alloys Thus, in this study duplex stainless steels with complex but well understood chemistries were used to investigate the relative importance of different heterogeneous nucleation sites – specifically spinodal decomposition and Cu clustering – on precipitation of Ni-Si-Mn particles during long term thermal aging. Precipitation of Ni-Si-Mn particles in duplex stainless steels and ferritic steels during thermal aging and irradiation is known to have profound effect on mechanical properties. Using duplex stainless steels with custom modified compositions along with atom probe tomography characterization and first-passage kinetic Monte Carlo (FPKMC) simulations it is revealed that while the interface between Cr and Fe formed during spinodal decomposition can be a pathway for diffusion of Ni, Si, Mn, and Cu, it is not a site that encourages precipitation of Ni-Si-Mn rich particles. Instead, the presence of a higher concentration of Cu in these steels leads to formation of small Cu clusters with high energy interfaces that act as nucleation sites for Ni-Si-Mn particles because of its strong interaction particularly with Ni increasing the chemical driving force for precipitation. These results will help inform predictive models for the use of duplex stainless steels and other precipitation-hardened alloys for extended operation at high temperatures.

Duplex stainless steel, Thermal aging, Precipitati↗

BF{sub 3} PIII modeling: Implantation, amorphisation and diffusion

In the race for highly doped ultra-shallow junctions (USJs) in complementary metal oxide semi-conductor (CMOS) technologies, plasma immersion ion implantation (PIII) is a promising alternative to traditional beamline implantation. Currently, no commercial technology computer aided design (TCAD) process simulator allows modeling the complete USJ fabrication process by PIII, including as-implanted dopant profiles, damage formation, dopant diffusion and activation. In this work, a full simulation of a p-type BF{sub 3} PIII USJ has been carried out. In order to investigate the various physical phenomena mentioned above, process conditions included a high energy/high dose case (10 kV, 5 Multiplication-Sign 10{sup 15} cm{sup -2}), specifically designed to increase damage formation, as well as more technology relevant implant conditions (0.5 kV) for comparison. All implanted samples were annealed at different temperatures and times. As implanted profiles for both boron and fluorine in BF{sub 3} implants were modeled and compared to Secondary Ion Mass Spectrometry (SIMS) measurements. Amorphous/crystalline (a/c) interface depths were measured by transmission electron microscopy (TEM) and successfully simulated. Diffused profiles simulations agreed with SIMS data at low thermal budgets. A boron peak behind the a/c interface was observed in all annealed SIMS profiles for the 10 kV case, indicating boron trapping from EOR defects in this region even after high thermal budgets. TEM measurements on the annealed samples showed an end of range (EOR) defects survival behind the a/c interface, including large dislocation loops (DLs) lying on (001) plane parallel to the surface. In the last part of this work, activation simulations were compared to Hall measurements and confirmed the need to develop a (001) large BICs model.

36 MATERIALS SCIENCE↗

Microstructure selection in thin-sample directional solidification of an Al-Cu alloy: In situ X-ray imaging and phase-field simulations

We study microstructure selection during directional solidification of a thin metallic sample. We combine in situ X-ray radiography of a dilute Al-Cu alloy solidification experiments with three-dimensional phase-field simulations. We explore a range of temperature gradient G and growth velocity V and build a microstructure selection map for this alloy. We investigate the selection of the primary dendritic spacing Lambda and tip radius rho. While rho shows a good agreement between experimental measurements and dendrite growth theory, with rho similar to V-1/2, Lambda is observed to increase with V (partial derivative Lambda/partial derivative V > 0), in apparent disagreement with classical scaling laws for primary dendritic spacing, which predict that partial derivative Lambda/partial derivative V <0. We show through simulations that this trend inversion for Lambda(V) is due to liquid convection in our experiments, despite the thin sample configuration. We use a classical diffusion boundary-layer approximation to semi-quantitatively incorporate the effect of liquid convection into phase-field simulations. This approximation is implemented by assuming complete solute mixing outside a purely diffusive zone of constant thickness that surrounds the solid-liquid interface. This simple method enables us to quantitatively match experimental measurements of the planar morphological instability threshold and primary spacings over an order of magnitude in V. We explain the observed inversion of partial derivative Lambda/partial derivative V by a combination of slow transient dynamics of microstructural homogenization and the influence of the sample thickness.

36 MATERIALS SCIENCE↗

Electronic states on silicon surface after deposition and annealing of SiO{sub x} films

The spectrum of the photoconductivity induced by the polarization field of charges at surface states and traps in the film bulk has been analyzed to determine the energy band diagram at the c-Si-SiO{sub x} interface and the changes in the electronic states after the film annealing. It is found that the energy bands are bent at the Si-SiO{sub x} interface and the Si surface is enriched in electrons. In equilibrium the photocurrent peak at 1.1 eV is due to the band-to-band transitions in the silicon part of the interface. Annealing shifts the peak to higher energies; this shift increases with an increase in the annealing temperature from 650 to 1000 Degree-Sign C. This effect is accompanied by a decrease in the photocurrent at {<=}1.1 eV and weakening of the band-edge photoluminescence near the Si surface. The changes revealed are explained by the formation of an oxide layer with Si nanoclusters at the Si-SiO{sub x} interface upon annealing. This process is caused by oxygen diffusion from the SiO{sub x} film, which occurs mainly via defects on the Si wafer surface. The photoconductivity spectrum of the samples charged by short-term application of a negative potential to silicon exhibits electronic transitions in the SiO{sub x} film, both from the matrix electronic states and from the states of the defects and Si nanoclusters in the film.

36 MATERIALS SCIENCE↗

Photoemission spectroscopy study of the lanthanum lutetium oxide/silicon interface

Rare earth oxides are promising candidates for future integration into nano-electronics. A key property of these oxides is their ability to form silicates in order to replace the interfacial layer in Si-based complementary metal-oxide field effect transistors. In this work a detailed study of lanthanum lutetium oxide based gate stacks is presented. Special attention is given to the silicate formation at temperatures typical for CMOS processing. The experimental analysis is based on hard x-ray photoemission spectroscopy complemented by standard laboratory experiments as Rutherford backscattering spectrometry and high-resolution transmission electron microscopy. Homogenously distributed La silicate and Lu silicate at the Si interface are proven to form already during gate oxide deposition. During the thermal treatment Si atoms diffuse through the oxide layer towards the TiN metal gate. This mechanism is identified to be promoted via Lu-O bonds, whereby the diffusion of La was found to be less important.

36 MATERIALS SCIENCE↗

Local solid phase growth of few-layer graphene on silicon carbide from nickel silicide supersaturated with carbon

Patterned few-layer graphene (FLG) films were obtained by local solid phase growth from nickel silicide supersaturated with carbon, following a fabrication scheme, which allows the formation of self-aligned ohmic contacts on FLG and is compatible with conventional SiC device processing methods. The process was realised by the deposition and patterning of thin Ni films on semi-insulating 6H-SiC wafers followed by annealing and the selective removal of the resulting nickel silicide by wet chemistry. Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) were used to confirm both the formation and subsequent removal of nickel silicide. The impact of process parameters such as the thickness of the initial Ni layer, annealing temperature, and cooling rates on the FLG films was assessed by Raman spectroscopy, XPS, and atomic force microscopy. The thickness of the final FLG film estimated from the Raman spectra varied from 1 to 4 monolayers for initial Ni layers between 3 and 20 nm thick. Self-aligned contacts were formed on these patterned films by contact photolithography and wet etching of nickel silicide, which enabled the fabrication of test structures to measure the carrier concentration and mobility in the FLG films. A simple model of diffusion-driven solid phase chemical reaction was used to explain formation of the FLG film at the interface between nickel silicide and silicon carbide.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Carrier collection losses in interface passivated amorphous silicon thin-film solar cells

In silicon thin-film solar cells the interface between the i- and p-layer is the most critical. In the case of back diffusion of photogenerated minority carriers to the i/p-interface, recombination occurs mainly on the defect states at the interface. To suppress this effect and to reduce recombination losses, hydrogen plasma treatment (HPT) is usually applied. As an alternative to using state of the art HPT we apply an argon plasma treatment (APT) before the p-layer deposition in n-i-p solar cells. To study the effect of APT, several investigations were applied to compare the results with HPT and no plasma treatment at the interface. Carrier collection losses in resulting solar cells were examined with spectral response measurements with and without bias voltage. To investigate single layers, surface photovoltage and X-ray photoelectron spectroscopy (XPS) measurements were conducted. The results with APT at the i/p-interface show a beneficial contribution to the carrier collection compared with HPT and no plasma treatment. Therefore, it can be concluded that APT reduces the recombination centers at the interface. Further, we demonstrate that carrier collection losses of thin-film solar cells are significantly lower with APT.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Flow regimes for fluid injection into a confined porous medium

We report theoretical and numerical studies of the flow behaviour when a fluid is injected into a confined porous medium saturated with another fluid of different density and viscosity. For a two-dimensional configuration with point source injection, a nonlinear convection–diffusion equation is derived to describe the time evolution of the fluid–fluid interface. In the early time period, the fluid motion is mainly driven by the buoyancy force and the governing equation is reduced to a nonlinear diffusion equation with a well-known self-similar solution. In the late time period, the fluid flow is mainly driven by the injection, and the governing equation is approximated by a nonlinear hyperbolic equation that determines the global spreading rate; a shock solution is obtained when the injected fluid is more viscous than the displaced fluid, whereas a rarefaction wave solution is found when the injected fluid is less viscous. In the late time period, we also obtain analytical solutions including the diffusive term associated with the buoyancy effects (for an injected fluid with a viscosity higher than or equal to that of the displaced fluid), which provide the structure of the moving front. Numerical simulations of the convection–diffusion equation are performed; the various analytical solutions are verified as appropriate asymptotic limits, and the transition processes between the individual limits are demonstrated.

58 GEOSCIENCES↗

Fabrication of a High Chromium Cast Iron/Low Carbon Steel Bimetal: Diffusion Behavior and Bonding Strength

In the present study, a high chromium cast iron (HCCI) alloyed with Mo (16 wt.% Cr-6 wt.% Mo-2.4 wt.% C) with excellent wear resistance was bonded to a low carbon steel (LCS) by surface liquid-phase sintering. The bimetal was also subjected to a quenching + tempering treatment. The diffusion behavior of the atoms between the HCCI and LCS was analyzed. The bonding strength of the bimetal was investigated before and after heat treatment. The results show that the bimetal had a good bonding quality due to the uphill diffusion of C atoms. A diffusion zone with a width of approximately 37 μm and a troostite structure formed on the HCCI side by the interface. With different bonding times, there was no obvious change in the width of the diffusion zone. The shear strength of the bimetal at all holding times was reduced from a high level after heat treatment and decreased with increasing tempering temperature. The impact toughness of the bimetal substantially increased compared with that of the HCCI. After a quenching treatment, the impact toughness of the bimetal decreased, and the microhardness of the diffusion zone improved. As the tempering temperature increased, the microhardness and impact toughness decreased and increased, respectively.

36 MATERIALS SCIENCE↗

Thermodynamics and kinetics of core-shell versus appendage co-precipitation morphologies

What determines precipitate morphologies in co-precipitating alloy systems? We focus on alloys of two precipitating phases, with the fast-precipitating phase acting as heterogeneous nucleation sites for a second phase manifesting slower kinetics. Kinetic lattice Monte Carlo simulations show that the interplay between interfacial and ordering energies, plus active diffusion paths, strongly affect the selection of core-shell verses appendage morphologies. We study a FeCuMnNiSi alloy using the combination of atom probe tomography and simulations, and show that the ordering energy reduction of the MnNiSi phase heterogeneously nucleated on a pre-existing copper-rich precipitate exceeds the energy penalty of a predominantly Fe/Cu interface, leading to initial appendage, rather than core-shell, formation. Diffusion of Mn, Ni and Si around and through the Cu core towards the ordered phase results in subsequent appendage growth. We further show that in cases with higher primary precipitate interface energies and/or suppressed ordering, the coreshell morphology is favored.

Shu, Shipeng↗

Generalized quantum efficiency analysis for non-ideal solar cells: Case of Cu{sub 2}ZnSnSe{sub 4}

Detailed quantum efficiency (QE) analysis of a nanoparticle-based Cu{sub 2}ZnSnSe{sub 4} (CZTSe) solar cell has been conducted to understand photogenerated carrier collection in the device. Specifically, voltage-dependent analysis has been considered to characterize both diffusion limitations and recombination limitations to carrier collection. Application of a generalized QE model and corresponding experimental and analytical procedures are presented to account for non-ideal device behavior, with specific consideration of photogenerated charge trapping, finite absorber thickness, back-surface recombination, and recombination of photogenerated carriers via interface, space-charge-region limited, and/or band tail limited recombination mechanisms. Analysis of diffusion limited collection results in extraction of the minority carrier diffusion length, mobility, back surface recombination velocity, and absorption coefficient. Additionally, forward bias QE measurements afford analysis of the dominant recombination mechanism for photogenerated carriers. For the analyzed CZTSe device, diffusion limitations are not expected to play a significant role in carrier collection in forward bias. However, voltage-dependent carrier collection, previously identified to contribute to open-circuit voltage limitations, is attributed to high recombination rates via band tail states/potential fluctuations in forward bias. A consideration of the assumptions commonly applied to diffusion length, band gap, and band tail extraction is also discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electrical characteristics and formation mechanism of atmospheric pressure plasma jet

The behavior of atmospheric pressure plasma jet produced by a coplanar dielectric barrier discharge in helium in external electrostatic and magnetic field is investigated. Net negative charges in the plasma jet outside the tube were detected. The deflection of the plume in the external field was observed. The plasma jet is suggested to be formed by the electron beam from the temporal cathode which is accelerated by a longitudinal field induced by the surface charges on the dielectric tube or interface between the helium and ambient air. The helium flow is necessary for the jet formation in the surrounding air.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗