Search NASA⌕ Search

SEARCH · Search NASA

Results for “interface velocity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

In situ formation of pseudohalide anions induced by humid air and light passivates formamidinium‐based halide perovskites

Abstract Metal halide perovskites based on formamidinium (FA), or FA‐rich compositions have shown great promise for high‐performance photovoltaics. A deeper understanding of the impact of ambient conditions (e.g., moisture, oxygen, and illumination) on the possible reactions of FA‐based perovskite films and their processing sensitivities has become critical for further advances toward commercialization. Herein, we investigate reactions that take place on the surface of the FA 0.7 Cs 0.3 , mixed Br/I wide bandgap perovskite thin films in the presence of humid air and ambient illumination. The treatment forms a surface layer containing O, OH, and N‐based anions. We propose the latter originates from formamidine trapped at the perovskite/oxide interface reacting further to cyanide and/or formamidinate—an understudied class of pseudohalides that bind to Pb. Optimized treatment conditions improve photoluminescence quantum yield owing to both reduced surface recombination velocity and increased bulk carrier lifetime. The corresponding perovskite solar cells also exhibit improved performance. Identifying these reactions opens possibilities for better utilizing cyanide and amidinate ligands, species that may be expected during vapor processing of FA‐based perovskites. Our work also provides new insights into the self‐healing or self‐passivating of MA‐free perovskite compositions where FA and iodide damage could be partially offset by advantageous reaction byproducts. image

14 SOLAR ENERGY↗

MICRO- AND NANOSCALE MEASUREMENT METHODS FOR PHASE CHANGE HEAT TRANSFER ON PLANAR AND STRUCTURED SURFACES

In this opinion piece, we discuss recent advances in experimental methods for characterizing phase change heat transfer. We begin with a survey of techniques for high-resolution measurements of temperature and heat flux at the solid surface and in the working fluid. Next, we focus on diagnostic tools for boiling heat transfer and describe techniques for visualizing the temperature and velocity fields, as well as measurements at the single bubble level. Finally, we discuss techniques to probe the kinetics of vapor formation within a few molecular layers of the interface. We conclude with our outlook for future progress in experimental methods for phase change heat transfer.

Buongiorno, J↗

THREE-DIMENSIONAL SIMULATIONS OF MIXING INSTABILITIES IN SUPERNOVA EXPLOSIONS

We present the first three-dimensional (3D) simulations of the large-scale mixing that takes place in the shock-heated stellar layers ejected in the explosion of a 15.5 M{sub sun} blue supergiant star. The blast is initiated and powered by neutrino-energy deposition behind the stalled shock by means of choosing sufficiently high neutrino luminosities from the contracting, nascent neutron star, whose high-density core is excised and replaced by a retreating inner grid boundary. The outgoing supernova shock is followed beyond its breakout from the stellar surface more than 2 hr after the core collapse. Violent convective overturn in the post-shock layer causes the explosion to start with significant large-scale asphericity, which acts as a trigger of the growth of Rayleigh-Taylor instabilities at the composition interfaces of the exploding star. Despite the absence of a strong Richtmyer-Meshkov instability at the H/He interface, which only a largely deformed shock could instigate, deep inward mixing of hydrogen is found as well as fast-moving, metal-rich clumps penetrating with high velocities far into the hydrogen envelope of the star as observed, for example, in the case of Supernova 1987A. Also individual clumps containing a sizeable fraction of the ejected iron-group elements (up to several 10{sup -3} M{sub sun}) are obtained in some models. The metal core of the progenitor is partially turned over with nickel-dominated fingers overtaking oxygen-rich bullets and both nickel and oxygen moving well ahead of the material from the carbon layer. Comparing with corresponding two-dimensional (axially symmetric; 2D) calculations, we determine the growth of the Rayleigh-Taylor fingers to be faster, the deceleration of the dense metal-carrying clumps in the helium and hydrogen layers to be reduced, the asymptotic clump velocities in the hydrogen shell to be higher (up to {approx}4500 km s{sup -1} for the considered progenitor and an explosion energy of 10{sup 51} erg, instead of {approx_lt}2000 km s{sup -1} in 2D), and the outward radial mixing of heavy elements and inward mixing of hydrogen to be more efficient in 3D than in 2D. We present a simple argument that explains these results as a consequence of the different action of drag forces on moving objects in the two geometries.

79 ASTRONOMY AND ASTROPHYSICS↗

First high-resolution spectroscopic observations of an erupting prominence within a coronal mass ejection by the Interface Region Imaging Spectrograph (IRIS)

Spectroscopic observations of prominence eruptions associated with coronal mass ejections (CMEs), although relatively rare, can provide valuable plasma and three-dimensional geometry diagnostics. We report the first observations by the Interface Region Imaging Spectrograph mission of a spectacular fast CME/prominence eruption associated with an equivalent X1.6 flare on 2014 May 9. The maximum plane-of-sky and Doppler velocities of the eruption are 1200 and 460 km s{sup −1}, respectively. There are two eruption components separated by ∼200 km s{sup −1} in Doppler velocity: a primary, bright component and a secondary, faint component, suggesting a hollow, rather than solid, cone-shaped distribution of material. The eruption involves a left-handed helical structure undergoing counterclockwise (viewed top-down) unwinding motion. There is a temporal evolution from upward eruption to downward fallback with less-than-free-fall speeds and decreasing nonthermal line widths. We find a wide range of Mg ii k/h line intensity ratios (less than ∼2 expected for optically-thin thermal emission): the lowest ever reported median value of 1.17 found in the fallback material, a comparably high value of 1.63 in nearby coronal rain, and intermediate values of 1.53 and 1.41 in the two eruption components. The fallback material exhibits a strong (>5σ) linear correlation between the k/h ratio and the Doppler velocity as well as the line intensity. We demonstrate that Doppler dimming of scattered chromospheric emission by the erupted material can potentially explain such characteristics.

79 ASTRONOMY AND ASTROPHYSICS↗

CELFE: Coupled Eulerian-Lagrangian Finite Element program for high velocity impact. Part 1: Theory and formulation

A 3-D finite element program capable of simulating the dynamic behavior in the vicinity of the impact point, together with predicting the dynamic response in the remaining part of the structural component subjected to high velocity impact is discussed. The finite algorithm is formulated in a general moving coordinate system. In the vicinity of the impact point contained by a moving failure front, the relative velocity of the coordinate system will approach the material particle velocity. The dynamic behavior inside the region is described by Eulerian formulation based on a hydroelasto-viscoplastic model. The failure front which can be regarded as the boundary of the impact zone is described by a transition layer. The layer changes the representation from the Eulerian mode to the Lagrangian mode outside the failure front by varying the relative velocity of the coordinate system to zero. The dynamic response in the remaining part of the structure described by the Lagrangian formulation is treated using advanced structural analysis. An interfacing algorithm for coupling CELFE with NASTRAN is constructed to provide computational capabilities for large structures.

Lee, C. H.↗

Instability of baroclinic flows with horizontal shear along topography

The stability of baroclinic flows with horizontal shear over sloping topography is analyzed with special emphasis on the structure and energetics of the unstable perturbations. The study is conducted by using a linearized two-layer quasi-geostrophic channel model for different topography profiles and distributions of the basic velocity field. Interactions between the two fluid layers and the energy conversions by the unstable perturbations are described. It is found that topography sloping as (opposed to) the fluid interface contributes to enhance the perturbation amplitude in the upper (lower) layer relative to the lower (upper) layer. The results for bottom topography with differing characteristics across the flow indicate pronounced localized effects on the energy conversions over the slopes and the meridional scale of the perturbations in the lower layer.

Mechoso, C. R.↗

Detection of shocked atomic gas in the Kleinmann-Low nebula

The 63 micrometer (3)p(1)-(3)P(2) fine structure line emission of neutral atomic oxygen at the center of the Orion nebula with a resolution of 30" is presented. There are three main emission peaks. One is associated with the region of strongest thermal radio continuum radiation close to the Trapezium cluster, and probably arises at the interface between the HII region and the dense Orion molecular cloud. The other two line emission peaks, associated with the Kleinmann Low nebula, are similar in both distribution and velocity to those of the 2 micrometer S(1) line of molecular hydrogen and of the high velocity wings of rotational CO emission. The OI emission from the KL nebula can be produced in the shocked gas associated with the mass outflows in this region and is an important coolant of the shocked gas.

Werner, M.↗

Ground-based measurements of O 1D and the H2O production rate from comets

High spectral resolution 6300.3 A line profiles of Comet Halley are modeled to determine the relative contributions to the emission that can be expected from the distant O 1D daughters produced by photodissociation H2O, CO2, and CO. The results are compared with profiles measured with a single etalon Fabry-Perot interferometer interfaced with a 0.4-m telescopre. To accurately calculate Q O 1D using the 6300.3 A intensity, the line profile must be known. It is shown that the outflow velocity of the parent molecules from the nucleus can be determined using the interferometer profiles.

Kerr, R. B.↗

Theory and operation of a three-gate time-of-flight velocity analyzer

Theoretical considerations and test results are presented for a new-type velocity analyzer for incident fast neutral particles, positive ions, and negative ions. Velocity analysis is carried out by means of a pulsed, three-gate time-of-flight (TOF) technique capable of eliminating alias velocities (harmonics) to sixth order. In addition the design and operation are presented of a four-element ion lens system, with small spherical and chromatic aberrations, suitable for interfacing a large-diameter ion beam from the TOF section with a subsequent mass analyzer.

Martus, K. E.↗

Ultrasonic assessment of interfacial oxidation damage in ceramic matrix composites

A new approach to characterizing oxidation damage in ceramic matrix composites using ultrasonic techniques is proposed. In this approach, the elastic constants of the composite are determined nondestructively by measuring the angular dependence of both longitudinal and transverse wave velocities. A micromechanical model for composites with anisotropic constituents is used to find the anisotropic properties of an effective fiber, which is a combination of the fiber and the interface. Interfacial properties are extracted from the properties of this effective fiber by analyzing the difference between effective and actual fiber properties. Unidirectional /0/28 SiC/Si3N4 composites with 30 percent fiber volume fraction and 30 percent matrix porosity are used. The samples are exposed in a flowing oxygen environment at elevated temperatures, up to 1400 C, for 100 hours and then measured by ultrasonic methods at room temperature. The Young's modulus in the fiber direction of the sample oxidized at 600 C decreased significantly but it was unchanged for samples oxidized at temperatures above 1200 C. The transverse moduli obtained from ultrasonic measurements decrease continuously up to 1200 C. The shear stiffnesses show behavior similar to the transverse moduli. The effective elastic moduli of the interfacial carbon coating are determined from the experimental data, and their change due to thermal oxidation is discussed.

Chu, Y. C.↗

Hot Gas in Planetary Nebulae

It was successfully obtained the FUSE spectra of all targets awarded. The analysis of the spectra has been a complex task due to the superposition of the P-Cygni profile from the wind of the central star and absorption components from low ionization and molecular species in the nebular shell. In six of the eight targets there are narrow O VI absorption components that may arise from the interface layer between the hot (l0(exp 6) K) interior gas and the surrounding warm (l0(exp 4) K) dense nebular shell. To better determine whether these narrow O VI absorption lines arise from the interface region we have obtained ground-based high-dispersion spectroscopic observations of the central star and nebula to pin-point the precise line-of-sight velocity of the nebular emission lines. The comparison between these optical spectra with the far-UV spectra obtained with FUSE is complete. The analysis shows that in most cases the narrow O VI absorption components have velocities slightly redshifted from the emission lines which arise from the approaching side of the nebular shell. Preliminary results have been published in two papers.

Gruendl, Robert A.↗

Electromagnetic field of a moving charge in the presence of a left-handed medium

We analyze the electromagnetic field of a moving point charge in the presence of a 'left-handed' medium (LHM). First, the case of uniform motion of the charge in infinite LHM was considered. Using complex function theory methods, we decomposed the total field into a 'quasi-Coulomb' field, a wave field (Cherenkov radiation) and a 'plasma trace'. In addition, an effective numerical algorithm was developed for the total field computation, and typical plots were presented. It was shown that the wave field in LHM lags behind the charge more so than it does in ordinary medium. Furthermore, we investigated a charge intersecting the interface between vacuumlike medium and LHM. Asymptotic expressions for the field components were obtained and algorithms for their computation were developed. The spatial radiation can be separated into three distinct components, corresponding to ordinary transition radiation with a relatively large magnitude, Cherenkov radiation and reversed Cherenkov-transition radiation (RCTR). Rigorous conditions for generating RCTR were obtained: RCTR in the vacuum area was found to be the double threshold effect in both frequency and charge velocity domain. The RCTR decay in vacuum due to the losses in LHM was studied. Areas of the RCTR significance were determined and were found to be sufficiently large for observation. Possible applications to the beam diagnostics and the characterization of metamaterials were suggested.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

TEMPORAL EVOLUTION OF CHROMOSPHERIC EVAPORATION: CASE STUDIES OF THE M1.1 FLARE ON 2014 SEPTEMBER 6 AND X1.6 FLARE ON 2014 SEPTEMBER 10

With observations from the Interface Region Imaging Spectrograph, we track the complete evolution of ∼11 MK evaporation flows in an M1.1 flare on 2014 September 6 and an X1.6 flare on 2014 September 10. These hot flows, as indicated by the blueshifted Fe xxi 1354.08 Å line, evolve smoothly with a velocity decreasing exponentially from ∼200 km s{sup −1} to almost stationary within a few minutes. We find a good correlation between the flow velocity and energy deposition rate as represented by the hard X-ray flux observed with the Reuven Ramaty High Energy Solar Spectroscopic Imager, or time derivative of the soft X-ray flux observed with the Geostationary Operational Environmental Satellites and the HINODE X-ray Telescope, which is in general agreement with models of nonthermal electron heating. The maximum blueshift of Fe xxi appears approximately at the same time as or slightly after the impulsive enhancement of the ultraviolet continuum and the Mg ii 2798.8 Å line emission, demonstrating that the evaporation flow is closely related to heating of the lower chromosphere. Finally, while the hot Fe xxi 1354.08 Å line is entirely blueshifted with no obvious rest component, cool chromospheric and transition region lines like Si iv 1402.77 Å are often not entirely redshifted but just reveal an obvious red wing enhancement at the ribbons, suggesting that the speed of chromospheric condensation might be larger than previously thought.

79 ASTRONOMY AND ASTROPHYSICS↗

The Impact of the Group Environment on the O vi Circumgalactic Medium

We present a study comparing O vi λλ1031, 1037 doublet absorption found toward group galaxy environments to that of isolated galaxies. The O vi absorption in the circumgalactic medium (CGM) of isolated galaxies has been studied previously by the “Multiphase Galaxy Halos” survey, where the kinematics and absorption properties of the CGM have been investigated. We extend these studies to group environments. We define a galaxy group as having two or more galaxies with a line-of-sight velocity difference of no more than 1000 km s{sup −1} and located within 350 kpc (projected) of a background quasar sightline. We identified a total of six galaxy groups associated with O vi absorption W {sub r} > 0.06 Å that have a median redshift of 〈z{sub gal}〉=0.1669 and a median impact parameter of 〈D〉=134.1 kpc. An additional 12 non-absorbing groups were identified with a median redshift of 〈z{sub gal}〉=0.2690 and a median impact parameter of 〈D〉=274.0 kpc. We find the average equivalent width to be smaller for group galaxies than for isolated galaxies (3σ). However, the covering fractions are consistent with both samples. We used the pixel-velocity two-point correlation function method and find that the velocity spread of O vi in the CGM of group galaxies is significantly narrower than that of isolated galaxies (10σ). We suggest that the warm/hot CGM does not exist as a superposition of halos; instead, the virial temperature of the halo is hot enough for O vi to be further ionized. The remaining O vi likely exists at the interface between hot diffuse gas and cooler regions of the CGM.

79 ASTRONOMY AND ASTROPHYSICS↗

Ignition of n-heptane pool by heated stagnating oxidizing flow

The ignition temperature of a liquid pool of n-heptane by heated oxidizer in a stagnation flow was experimentally determined for system pressures of 0.61-3 atm and pressure-weighted strain rates of 60-350 s{sup -1}. The surface of the liquid pool was maintained at a fixed location through continuous replenishment. The state of ignition was brought about, and monitored, by gradually increasing the oxidizer temperature. The strain rate was determined by seeding and measuring the oxidizer flow velocity using laser Doppler velocimetry (LDV). Computational simulation of the ignition event with detailed chemistry and transport was conducted by using a stagnation-flow code. The kinetic mechanisms utilized are a high-temperature n-heptane oxidation model, with 130 species and 955 reactions, and a reduced one of 58 species derived from a detailed mechanism of 561 species and 2539 reactions. The former mechanism yielded better agreement with the experimental measurements in general over the conditions examined. It was also found that the mole fraction of n-heptane at the interface changed only slightly with pressure and strain rate, and can be considered to have minimal effect on the ignition responses studies herein. A recently developed explosive mode analysis (EMA) was conducted to identify the controlling radicals and reactions in the non-premixed ignition of n-heptane. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The melting temperature of liquid water with the effective fragment potential

Direct simulation of the solid-liquid water interface with the effective fragment potential (EFP) via the constant enthalpy and pressure (NPH) ensemble was used to estimate the melting temperature (Tm) of ice-Ih. Initial configurations and velocities, taken from equilibrated constant pressure and temperature (NPT) simulations at T = 300 K, 350 K and 400 K, respectively, yielded corresponding Tm values of 378±16 K, 382±14 K and 384±15 K. These estimates are consistently higher than experiment, albeit to the same degree with previously reported estimates using density functional theory (DFT)-based Born-Oppenheimer simulations with the Becke-Lee-Yang-Parr functional plus dispersion corrections (BLYP-D). KRB was supported by a Computational Science Graduate Fellowship from the Department of Energy. MSG was supported by a U.S. National Science Foundation Software Infrastructure (SI2) grant (ACI – 1047772). SSX acknowledges support from the US Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences and Biosciences. Pacific Northwest National Laboratory (PNNL) is a multiprogram national laboratory operated for DOE by Battelle.

Brorsen, Kurt R.↗

Surface plasma wave assisted second harmonic generation of laser over a metal film

Second harmonic generation of laser mode converted surface plasma wave (SPW) over a corrugated metal film is studied. The laser, impinged on the metal film, under attenuated total reflection configuration, excites SPW over the metal–vacuum interface. The excited SPW extends over a much wider surface area than the laser spot cross-section. It exerts a second harmonic ponderomotive force on metal electrons, imparting them velocity that beats with the surface ripple to produce a nonlinear current, driving resonant second harmonic surface plasma wave.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental investigation on the phenomena around the onset nucleate boiling during the impacting of a droplet on the hot surface

Onset of nucleate boiling of a droplet when impacted onto hot surface was investigated. Three kinds of surfaces, normal stainless steel (NSS), stainless steel with TiO{sub 2} coating (UVN), and stainless steel with TiO{sub 2} coating and radiated by ultraviolet ray were employed to examine the effect of wettability. The droplet size was 2.4 mm diameter, and dropped under different We number. The image is generated by high speed camera with the frame speed of 1000 fps. The boiling conditions are identified as natural convection, nucleate boiling, critical heat flux, transition, and film boiling. In the present report, the discussion will be focused on the beginning of nucleate boiling on the droplet. Nucleate boiling occurs when bubbles are generated. These bubbles are probably caused by nucleation on the impurities within the liquid rather than at nucleation sites on the heated surface because the bubbles appear to be in the bulk of the liquid instead of at the liquid-solid interface. In addition, the smaller the contact angle, the fastest the boiling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗