Search NASA⌕ Search

SEARCH · Search NASA

Results for “materials availability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Synthesis, in vitro antifungal evaluation and docking studies of novel derivatives of imidazoles and benzimidazoles

A series of imidazole and benzimidazole derivatives was designed and prepared in good yields via convenient and efficient two steps synthetic route using readily available starting materials. The structures of the synthesized compounds and their intermediates were characterized by IR, {sup 1}H-NMR, {sup 13}C-NMR spectroscopy, and MS spectra. The in vitro antifungal activities of the targeted compounds were evaluated against Candida Albicans, Cryptococcus neoformans, Aspergillus niger, and Microsporum gypseum. The results showed that some of these azole-derivatives exhibited good to excellent antifungal activities against the used strains especially C. neoformans and A. niger. For example, compound 6b, 1-[2-Phenyl-2-(3-phenyl-propoxy)-ethyl]-1H-imidazole, was quite effective on the C. neoformans, A. niger, and M. gypseum with MIC 1.95 µg mL{sup −1}. The in silico molecular docking study was also done on the synthesized compounds and the results showed they have minimum binding energy and relatively good affinity toward cytochrome P450. According to the in vitro antifungal results and molecular docking studies, the compounds 6a–d can be selected as lead compounds for further pharmaceutical investigations.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2015

Integrated separation scheme for measuring a suite of fission and activation products from a fresh mixed fission and activation product sample

Mixed fission and activation materials resulting from various nuclear processes and events contain a wide range of isotopes for analysis spanning almost the entire periodic table. In some applications such as environmental monitoring, nuclear waste management, and national security a very limited amount of material is available for analysis and characterization so an integrated analysis scheme is needed to measure multiple radionuclides from one sample. This work describes the production of a complex synthetic sample containing fission products, activation products, and irradiated soil and determines the percent recovery of select isotopes through the integrated chemical separation scheme. Results were determined using gamma energy analysis of separated fractions and demonstrate high yields of Ag (76 ± 6%), Au (94 ± 7%), Cd (59 ± 2%), Co (93 ± 5%), Cs (88 ± 3%), Fe (62 ± 1%), Mn (70 ± 7%), Np (65 ± 5%), Sr (73 ± 2%) and Zn (72 ± 3%). Lower yields (< 25%) were measured for Ga, Ir, Sc, and W. Based on the results of this experiment, a complex synthetic sample can be prepared with low atom/fission ratios and isotopes of interest accurately and precisely measured following an integrated chemical separation method.

activation product analysis↗
DOE OSTI2020

Characterization of two types of polysaccharides from Eremurus hissaricus roots growing in Tajikistan

Eremurus Hissaricus (E.hissaricus) is a native plant of Tajikistan that has been used in traditional medicine and whose raw components have been identified as having potential for the domestic economy. We have found that carbohydrates comprise 80–85% of the root biomass, from which we have characterized two types of polysaccharides: A water-soluble polysaccharide (WSP) and an acid-soluble polysaccharide (ASP), with 23% and 8% yields, respectively. The results from FTIR, HPAEC-PAD, HPSEC, methylation linkage analysis and NMR spectroscopy ( 1 H, 13 C, zTOCSY, HSQC, HSQCTOXY and HMBC) demonstrated that WSP has a backbone of (1 → 4)-linked β-d-mannopyranosyl and β-d-glucopyranosyl residues in a 1.5:1 M ratio, having acetylated groups, with weight-average molecular weights of 495 kDa. Analyses of ASP indicate that it is comprised of d-galactose, d-mannose, and d-glucose in a molar ratio of 1.8: 1.6: 1.0, which is consistent with a branched galactoglucomannan polysaccharide with (1 → 4)-linked β-pyranose configurations, and weight-average molecular weight of 179 kDa. The FTIR absorption bands in the region of 875–890 cm 1 and NMR spectroscopy data confirm the presence of β-pyranose configuration of main polysaccharide backbone in the both ASP and WSP samples. These polysaccharides are an available raw material with the potential for use in a number of industrial applications.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Oak Ridge Computing Academy: An HPC cluster deployment and management pilot

The High Performance Computing Technologies (HPCT) course is a hands-on High Performance Computing (HPC) cluster deployment and management training program offered as part of the International School for Advanced Studies (SISSA) and the International Center for Theoretical Physics (ICTP) Master in High Performance Computing (MHPC) specialization. Here, this training program introduces students to key concepts in cluster configuration. which include networking, software stack provisioning, job scheduling, and monitoring. The publicly available course materials feature several examples and underlying methods that are broadly applicable to cluster deployment and management. This paper discusses the design of a new workforce development program at the Oak Ridge National Laboratory that is based on HPCT, the Oak Ridge Computing Academy (ORCA). The ORCA pilot program was hosted by the Oak Ridge Leadership Computing Facility (OLCF) in Summer 2025. As a part of this discussion, HPCT and ORCA course contents and infrastructure are outlined, ORCA participant experiences are detailed, and potential opportunities for improvement are discussed.

Education↗
DOE OSTI2020

Defect cluster and nonequilibrium gas bubble associated growth in irradiated UMo fuels – a cluster dynamics and phase field model

Irradiation examination shows that gas bubble swelling kinetics is much faster after irradiation-induced recrystallization than that prior recrystallization in UMo fuels. It implies that gas bubbles in coarse grains and small recrystallized grains have different growth behavior. In this work, a phase-field model of gas bubble evolution integrating microstructure dependent cluster dynamics has been developed, for the first time, to study the gas bubble swelling behavior in the recrystallization zone of UMo fuels. Generation, diffusion, reaction, sink, emission and clustering of vacancies and interstitials are described by the cluster dynamics model while a phase-field model is used to describe the evolution of non-equilibrium gas bubbles including nucleation and growth. With the coupled model, the effect of defect generation rate, clustering rate, interstitial emission and sink rates on grain boundaries on the gas bubble evolution are systematically simulated. A set of model parameters (defect generation rate, clustering rate, interstitial emission and sink rates) is determined by comparing measured and simulated gas bubble swelling kinetics. The results demonstrate that interstitial clustering is one of the important physical mechanisms which results in a fast gas bubble swelling kinetics in the recrystallization zone. The developed model can also be extended to study the associated growth of defect and second phase precipitates often observed in irradiated materials.

Hu, Shenyang↗
DOE OSTI2021

Solar photovoltaics is ready to power a sustainable future

Thanks to fast learning and sustained growth, solar photovoltaics (PV) is today a highly cost-competitive technology, ready to contribute substantially to CO 2 emissions mitigation. However, many scenarios assessing global decarbonization pathways, either based on integrated assessment models or partial-equilibrium models, fail to identify the key role that this technology could play, including far lower future PV capacity than that projected by the PV community. In this perspective, we review the factors that lie behind the historical cost reductions of solar PV and identify innovations in the pipeline that could contribute to maintaining a high learning rate. We also aim at opening a constructive discussion among PV experts, modelers, and policymakers regarding how to improve the representation of this technology in the models and how to ensure that manufacturing and installation of solar PV- can ramp up on time, which will be crucial to remain in a decarbonization path compatible with the Paris Agreement.

14 SOLAR ENERGY↗
DOE OSTI2016

Improvement and analysis of the hydrogen-cerium redox flow cell

In this paper, the H 2 -Ce redox flow cell is optimized using commercially-available cell materials. Cell performance is found to be sensitive to the upper charge cutoff voltage, membrane boiling pretreatment, methanesulfonic-acid concentration, (+) electrode surface area and flow pattern, and operating temperature. Performance is relatively insensitive to membrane thickness, Cerium concentration, and all features of the (-) electrode including hydrogen flow. Cell performance appears to be limited by mass transport and kinetics in the cerium (+) electrode. Maximum discharge power of 895 mW cm -2 was observed at 60 °C; an energy efficiency of 90% was achieved at 50 °C. Finally, the H 2 -Ce cell is promising for energy storage assuming one can optimize Ce reaction kinetics and electrolyte.

25 ENERGY STORAGE↗
DOE OSTI2020

Renewable biohydrogen production from lignocellulosic biomass using fermentation and integration of systems with other energy generation technologies

Biohydrogen is a clean and renewable source of energy. It can be produced by using technologies such as thermochemical, electrolysis, photoelectrochemical and biological, etc. Among these technologies, the biological method (dark fermentation) is considered more sustainable and ecofriendly. Dark fermentation involves anaerobic microbes which degrade carbohydrate rich substrate and produce hydrogen. Lignocellulosic biomass is an abundantly available raw material and can be utilized as an economic and renewable substrate for biohydrogen production. Although there are many hurdles, continuous advancements in lignocellulosic biomass pretreatment technology, microbial fermentation (mixed substrate and co-culture fermentation), the involvement of molecular biology techniques, and understanding of various factors (pH, T, addition of nanomaterials) effect on biohydrogen productivity and yield render this technology efficient and capable to meet future energy demands. Further integration of biohydrogen production technology with other products such as bio-alcohol, volatile fatty acids (VFAs), and methane have the potential to improve the efficiency and economics of the overall process. In this study, various methods used for lignocellulosic biomass pretreatment, technologies in trends to produce and improve biohydrogen production, a coproduction of other energy resources, and techno-economic analysis of biohydrogen production from lignocellulosic biomass are reviewed.

09 BIOMASS FUELS↗
DOE OSTI2019

Large Negative Thermal Expansion Induced by Synergistic Effects of Ferroelectrostriction and Spin Crossover in PbTiO 3 -Based Perovskites

The discovery of unusual negative thermal expansion (NTE) provides the opportunity to control the common but much desired property of thermal expansion, which is valuable not only in scientific interests but also in practical applications. However, most of the available NTE materials are limited to a narrow temperature range, and the NTE effect is generally weakened by various modifications. Here, we report an enhanced NTE effect that occurs over a wide temperature range ($\overline{αV}$ = -5.24 × 10 -5 °C -1 , 25-575 °C), and this NTE effect is accompanied by an abnormal enhanced tetragonality, a large spontaneous polarization, and a G-type antiferromagnetic ordering in the present perovskite-type ferroelectric of (1-x)PbTiO 3 -xBiCoO 3 . Specifically, for the composition of 0.5PbTiO 3 -0.5BiCoO 3 , an extensive volumetric contraction of ~4.8 % has been observed near the Curie temperature of 700 °C, which represents the highest level in PbTiO 3 -based ferroelectrics. According to our experimental and theoretical results, the large NTE originates from a synergistic effect of the ferroelectrostriction and spin crossover of cobalt on the crystal lattice. The actual NTE mechanism is contrasted with previous functional NTE materials, in which the NTE is simply coupled with one ordering such as electronic, magnetic, or ferroelectric ordering. In conclusion, the present study sheds light on the understanding of NTE mechanisms, and it attests that NTE could be simultaneously coupled with different orderings, which will pave a new way toward the design of large NTE materials.

36 MATERIALS SCIENCE↗