Search NASA⌕ Search

SEARCH · Search NASA

Results for “multilayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Thermoelectric properties of electrically stressed Sb/Bi-Sb-Te multilayered films

Electrically stressed Bi-Sb-Te thin films have demonstrated markedly enhanced Hall mobility and moderately reduced carrier concentration. To lower electrical resistivity further, a Sb-inserted Bi-Sb-Te multilayer structure was prepared through consecutively sputtering Bi-Sb-Te and Sb layers followed by electric current stressing. The electrically stressed Sb/Bi-Sb-Te film demonstrates high carrier concentration and enhanced Hall mobility. We propose that the additional Sb supply suppresses electromigration-induced Sb depletion in crystal lattices, thus maintains high carrier concentration of the Bi-Sb-Te film. The presented approach provides a simple means to optimize thermoelectric properties of Bi-Sb-Te films.

36 MATERIALS SCIENCE↗

Size dependent strengthening mechanisms in sputtered Fe/W multilayers

We investigate size dependent strengthening mechanisms in sputtered Fe/W multilayers with individual layer thickness, h, varying from 1 to 200 nm. Microstructure analyses reveal that Fe/W has incoherent bcc/bcc interface when h is greater than 5 nm. When h decreases to 1-2.5 nm, the interface becomes semicoherent, and Fe and W show significant lattice distortions comparing to their bulk counterpart due to interface constraint. The layer thickness dependent drastic variations in x-ray diffraction profiles are simulated well by using an analytical model. Film hardness increases with decreasing h, and approaches a maximum value of 12.5 GPa when h is 1 nm. The layer thickness dependent film hardnesses are compared with analytical models. Koehler's image force plays a major role in determining the maximum strength of composites at smaller h.

36 MATERIALS SCIENCE↗

OPTIMIZATION OF LAYER DENSITIES FOR MULTILAYERED INSULATION SYSTEMS

Numerous tests of various multilayer insulation systems have indicated that there are optimal densities for these systems. However, the only method of calculating this optimal density was by a complex physics based algorithm developed by McIntosh. In the 1970's much data were collected on the performance of these insulation systems with many different variables analyzed. All formulas generated included number of layers and layer density as geometric variables in solving for the heat flux, none of them was in a differentiable form for a single geometric variable. It was recently discovered that by converting the equations from heat flux to thermal conductivity using Fourier's Law, the equations became functions of layer density, temperatures, and material properties only. The thickness and number of layers of the blanket were merged into a layer density. These equations were then differentiated with respect to layer density. By setting the first derivative equal to zero, and solving for the layer density, the critical layer density was determined. This method was checked and validated using test data from the Multipurpose Hydrogen Testbed which was designed using Mcintosh's algorithm.

36 MATERIALS SCIENCE↗

Strongly enhanced incorporation of oxygen into barium titanate based multilayer ceramic capacitors using water vapor

The reoxidation of sintered BaTiO{sub 3}-based multilayer ceramic capacitors (MLCCs) is currently an empirically determined, but poorly understood, procedure. In this work, the incorporation of oxygen into BaTiO{sub 3}-based MLCCs has been studied by means of isotope exchange annealing ({sup 18}O{sub 2}/{sup 16}O{sub 2}, {sup 1}H{sub 2}{sup 18}O/{sup 1}H{sub 2}{sup 16}O or {sup 2}H{sub 2}{sup 16}O/{sup 1}H{sub 2}{sup 16}O) and subsequent determination of the isotope profiles in the solid by secondary ion mass spectrometry. Oxygen isotope profiles in the barium titanate dielectric can be described by a bulk diffusion coefficient D* and a surface exchange coefficient k*. The values obtained for k* indicate that oxygen incorporation from H{sub 2}O is much faster than from dry O{sub 2}; it thus plays the key role in the reoxidation process.

36 MATERIALS SCIENCE↗

A W/B{sub 4}C Transmission Multilayer as an Achromatic Phase Shifter in the XUV: Some Experimental Aspects

Completing previous investigations we study a W/B{sub 4}C transmission multilayer with 350 periods each 1.74 nm as a phase shifter for polarization analysis between 720 eV and 1020 eV. The FWHM of the Bragg curve is as small as 0.18 deg. = 3 mrad and thus smaller than the inherent accuracy of most polarimeters. We discuss some of the experimental implications and limitations. We obtain a phase shift of up to {Delta} = 24 deg. through out the spectral range.

43 PARTICLE ACCELERATORS↗

Effects of total thickness on (001) texture, surface morphology, and magnetic properties of [Fe/Pt]{sub n} multilayer films by monatomic layer deposition

Atomic-scale [Fe/Pt]{sub n} multilayer films with different total thickness were prepared on thermally oxidized Si (100) substrates at room temperature by monatomic layer deposition using dc-magnetron and rf-magnetron sputtering. Effects of the total thickness on (001) texture, surface morphology, and magnetic properties of the postannealed films have been investigated. It is found that the particlelike structure films with perfect (001) texture and perpendicular magnetic anisotropy are obtained with a thickness of less than or equal to 6.5 nm. After 500 deg. C annealing, the films with thickness of 6.5 and 11.9 nm show very smooth surface. In addition, with increasing total thickness of the films, (001) texture and perpendicular magnetic anisotropy of the annealed films deteriorate, and the films become continuous in structure. The total thickness of the films also affects the exchange-coupling interaction among FePt magnetic grains and the magnetization reversal process.

36 MATERIALS SCIENCE↗

Swift Heavy Ion Irradiation Effect On Nanometer Range W/Fe Multilayers

The present study reports the effect of swift heavy ion irradiation on structural and magnetic properties of sputtered Fe/W multilayer structure (MLS) having a bilayer composition of [W(30A)/Fe(20A)]{sub 10BL}. The MLS was irradiated by 120 MeV Au{sup 9+} ions up to fluence of 4x10{sup 13} ions/cm{sup 2}. Structural study of pristine and irradiated MLS reveals that intra-layer microstructure of Fe-layers in the MLS becomes nano-crystalline on irradiation. Magnetic studies show increase in coercivity at higher fluence which may be due to increase in surface and interface roughness after recrystallization of Fe-layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Correspondence Between Magnetoresistance and Magnetization in Co/Cu Multilayers Studied at Higher Spacer Layer Thickness

A series of [Cu(t{sub Cu})/Co(25 A)]{sub 25} multilayers at higher spacer layer thickness have been deposited by dc magnetron sputtering. Magnetoresistance (MR) measurements have been carried out at different temperatures. MR curves showed hysteresis by displaying peaks at magnetic field H{sub p}. The field values exhibiting the maximum resistance in the magnetoresistance curve (H{sub p}) were greater than the coercivity (H{sub c}). The correspondence between the shape of the MR curve and that of the magnetization curve has been established and observed peak splitting in MR curves is attributed to a hardening in the magnetization reversal of some magnetic grains.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effective work function lowering of multilayer graphene films by subnanometer thick AlO{sub x} overlayers

A simple method for controlling the effective work function (WF) of conductive multilayer graphene (MLG) film, synthesized by using chemical vapor deposition and transferred to a dielectric substrate, was developed. The WFs of the MLG during the step-by-step deposition of aluminum (Al) were measured using in situ ultraviolet photoelectron spectroscopy. Core-level spectra were also collected to investigate the chemical reaction that occurred when a small amount of Al was deposited onto MLG in a stepwise manner. The measurements revealed that the effective WF of the conductive MLG film could be controlled from 3.77 to 4.40 eV by the deposition of an Al layer less than 0.6 nm thick.

36 MATERIALS SCIENCE↗

Optimization and Characterisation of Amorphous Iron Disilicide formed by Ion Beam Mixing of Fe/Si Multilayer Structures for Photovoltaic Applications

This study presents an optimization and characterization of amorphous Iron Disilicide (a-FeSi{sub 2}) synthesized using Ion Beam Mixing (IBM) of Fe/Si multilayer structures. The layers were deposited using RF magnetron sputtering, and subsequently irradiated with Ar{sup +} and Fe{sup +} beams of 150 and 200 keV. Rutherford Back Scattering (RBS) analysis was used to determine the structure and level of silicidation of the samples. The nature of the band-gap and the optical absorption coefficients were determined by optical transmission analysis. The results demonstrate that the synthesis of a-FeSi{sub 2} can be achieved using this technique, with the total level of silicidation being highly dependant upon the initial structure configuration and beam parameters. Direct band-gap energies of {approx}0.90 eV have been observed for those samples with the highest levels of silicidation, with optical absorption coefficients of {approx}10{sup 4} cm{sup -1}. Therefore this method of fabrication has been shown to produce a-FeSi{sub 2} layers without the need for post-synthesis treatment, using established technologies without compromising the optical properties that make this material such a promising semiconductor for the photovoltaics market.

36 MATERIALS SCIENCE↗

Growth of multilayers of Bi{sub 2}Se{sub 3}/ZnSe: Heteroepitaxial interface formation and strain

Multilayers of Bi{sub 2}Se{sub 3}/ZnSe with the periodicity of a few nanometers were grown by molecular-beam epitaxy on Si(111). While epitaxial growth of Bi{sub 2}Se{sub 3} on ZnSe proceeded by two-dimensional nucleation, ZnSe growth on Bi{sub 2}Se{sub 3} showed the three-dimensional growth front. Therefore, the two complementary interfaces of Bi{sub 2}Se{sub 3}/ZnSe were asymmetric in morphological properties. Strain-relaxation rates were found to differ between epitaxial ZnSe and Bi{sub 2}Se{sub 3}, which could be attributed to the specific growth modes and the properties of Bi{sub 2}Se{sub 3} and ZnSe surfaces.

36 MATERIALS SCIENCE↗

Microwave assisted magnetization switching in Co/Pt multilayer

In this study, we have experimentally investigated the microwave assisted magnetization by switching (MAS) on the microstructured Co/Pt multilayer. The sample exhibits the typical magnetization curve peculiar to perpendicular anisotropy films, that is, a steep reversal initiated by nucleation of a reversed domain followed by its subsequent gradual expansion by the domain wall displacement. By applying microwaves with the frequency of GHz order, the nucleation field H{sub n} is significantly reduced at three frequencies. Taking into account the effective anisotropy field of our sample, the first dip of H{sub n} at the lowest frequency probably corresponds to the Kittel mode excitation, and the other two dips at higher frequencies correspond to unidentified excitation modes other than the Kittel mode. Among them, the last dip of H{sub n} at the highest frequency reaches about 1/3 of that without microwave application. These results suggest the existence of more effective excitation modes for MAS than the Kittel mode.

36 MATERIALS SCIENCE↗

Adsorption of ammonia on multilayer iron phthalocyanine

The adsorption of ammonia on multilayers of well-ordered, flat-lying iron phthalocyanine (FePc) molecules on a Au(111) support was investigated by x-ray photoelectron spectroscopy. We find that the electron-donating ammonia molecules coordinate to the metal centers of iron phthlalocyanine. The coordination of ammonia induces changes of the electronic structure of the iron phthalocyanine layer, which, in particular, lead to a modification of the FePc valence electron spin.

36 MATERIALS SCIENCE↗

Observation of continuous and reversible bcc-fcc phase transformation in Ag/V multilayers

A continuous and reversible bcc-fcc phase transformation via a rotation of bcc(110) or fcc(111) planes is observed in the Bain orientation relationship in a sputter deposited V/Ag multilayers using high resolution transmission electron microscopy and analyzed using molecular dynamics simulations. As a result of the continuous phase transformation, an intermediate bct phase connecting the bcc and fcc phases coexists, giving rise to the Bain path. The periodic displacement of atoms occurs in every two adjacent Ag and V layers. The alternating shear stress created by misfit strain is responsible for generating such transformation.

36 MATERIALS SCIENCE↗

Electron beam-induced nanopatterning of multilayer graphene and amorphous carbon films with metal layers

Thin Co and Ni lamellae grow under electron irradiation of metal crystals supported on multilayer graphene or amorphous carbon films. The lateral growth of a lamella from a source crystal is achieved by directing an electron beam to the periphery of the metal crystal and moving the beam over the surrounding carbon. Patterns of linear, branched, or ringlike metal lamellae can be created. The patterning is carried out in situ in a transmission electron microscope, allowing simultaneous structuring and imaging. The process is driven by the metal-carbon interaction at a beam-activated carbon surface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Mixing Of Mode Symmetries In Top Gated Bilayer And Multilayer Graphene Field Effect Devices

We report Raman study to investigate the influence of stacking on the inversion symmetry breaking in top gated bi- and multi-layer ({approx}10 layers) graphene field effect transistors. The G phonon mode splits into a low frequency (G{sub low}) and a high frequency (G{sub high}) mode in bi- and multi-layer graphene and the two modes show different dependence on doping. The mode splitting is explained in terms of mixing of zone-center in-plane optical phonons representing in-phase and out-of-phase inter-layer atomic motions. Unlike in bilayer graphene, there is no transfer of intensity from G{sub low} to G{sub high} in multilayer graphene. A comparison is made for the bilayer graphene data with the recent theory of Gava et al. [Phys. Rev. B 80, 155422 (2009)].

36 MATERIALS SCIENCE↗

MOKE Study of Fe/Co/Al Multilayers

The multilayer system (MLS)-[{sup 57}Fe{sub 25}A/Co{sub 11}A/Al{sub 17}A]x20 has been deposited by Ion beam sputtering (IBS) technique. The MLS has been annealed at 700 deg. C for 1 h. Overall composition of as deposited and annealed MLS have been characterized by EDX and magnetic properties have been studied through angular dependent magneto optic Kerr effect (MOKE) hysteresis curves. The study shows that the as-deposited MLS has excellent soft magnetic properties coupled with perpendicular magnetic isotropy which is destroyed on annealing.

36 MATERIALS SCIENCE↗

Multilayer-Based Optics for High-Brightness X-ray Sources

High-brightness x-ray sources, such as next-generation synchrotrons and free-electron lasers (FELs), pose unique challenges for the development of x-ray optics. The peak intensities of FEL pulses can be high enough to convert any material placed in a focused beam into plasma. X-ray optics, which are used close to the focal spot, are likely to be partially or completely damaged in a single shot. Such optics would need to be replenished after each shot. Optics that are used in the unfocused or indirect beam may survive much longer, perhaps indefinitely, if care is used to limit the energy absorbed in the optics. Here we present different types of multilayer-based optics, which were used successfully in FEL experiments for reflecting, focusing, and filtering high-intensity, pulsed x-rays in a variety of novel science applications.

07 ISOTOPE AND RADIATION SOURCES↗