Search NASA⌕ Search

SEARCH · Search NASA

Results for “observable behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Neutron stars - A cosmic hadron physics laboratory

A progress report is given on neutron stars as a cosmic hadron physics laboratory. Particular attention is paid to the crustal neutron superfluid, and to the information concerning its properties which may be deduced from observations of pulsar glitches and postglitch behavior. Current observational evidence concerning the softness or stiffness of the high density neutron matter equation of state is reviewed briefly, and the (revolutionary) implications of a confirmation of the existence of a 0.5 ms pulsar at the core of (Supernova) SN1987A are discussed.

Pines, David↗

Non-LTE, line-blanketed model atmospheres for late O- and early B-type stars

The use of non-LTE line-blanketed model atmospheres to analyze the spectra of hot stars is reported. The stars analyzed are members of clusters and associations, have spectral types in the range O9-B2 and luminosity classes in the range III-IV, have slow to moderate rotation, and are photometrically constant. Sampled line opacities of iron-group elements were incorporated in the radiative transfer solution; solar abundances were assumed. Good to excellent agreement is obtained between the computed profiles and essentially all the line profiles used to fix the model, and reliable stellar parameters are derived. The synthetic M II 5581 equivalent widths agree well with the observed ones at the low end of the temperature range studied, but, above 25,000 K, the synthetic line is generally stronger than the observed line. The behavior of the observed equivalent widths of N II, N III, C II and C III lines as a function of Teff is studied. Most of the lines show much scatter, with no consistent trend that could indicate abundance differences from star to star.

Grigsby, James A.↗

Behavioral Adaptations of Female Mice on the International Space Station

Adult female mice were sent to the International Space Station (ISS) as part of an early life science mission utilizing NASA's Rodent Habitat. Its primary purpose was to provide further insight into the influence of a microgravity environment on various aspects of mammalian physiology and well-being as part of an ongoing program of research aimed ultimately at understanding and ameliorating the deleterious influences of space on the human body. The present study took advantage of video collected from fixed, in-flight cameras within the habitat itself, to assess behavioral adaptations observed among in-flight mice aboard the ISS and differences in behavior with respect to a control group on the ground. Data collection consisted of several behavioral measures recorded by a trained observer with the assistance of interactive behavior analysis software. Specific behavioral measures included frequencies of conspecific interactionsociability, time spent feeding and conducting hygienic behavior, and relative durations of thigmotactic behavior, which is commonly used as an index of anxiety. Data were used to test tentative hypotheses that such behaviors differ significantly across mice under microgravity versus 1g conditions, and the assumption that the novel experience of microgravity itself may represent an initially anxiogenic stimulus which an animal will eventually acclimate to, perhaps through habituation.

Behavior in space↗

Behavioral Adaptations of Female Mice on the International Space Station

Adult female mice were sent to the International Space Station (ISS) as part of an early life science mission utilizing NASA's Rodent Habitat. Its primary purpose was to provide further insight into the influence of a microgravity environment on various aspects of mammalian physiology and well-being as part of an ongoing program of research aimed ultimately at understanding and ameliorating the deleterious influences of space on the human body. The present study took advantage of video collected from fixed, in-flight cameras within the habitat itself, to assess behavioral adaptations observed among in-flight mice aboard the ISS and differences in behavior with respect to a control group on the ground. Data collection consisted of several behavioral measures recorded by a trained observer with the assistance of interactive behavior analysis software. Specific behavioral measures included frequencies of conspecific interactionsociability, time spent feeding and conducting hygienic behavior, and relative durations of thigmotactic behavior, which is commonly used as an index of anxiety. Data were used to test tentative hypotheses that such behaviors differ significantly across mice under microgravity versus 1g conditions, and the assumption that the novel experience of microgravity itself may represent an initially anxiogenic stimulus which an animal will eventually acclimate to, perhaps through habituation.

rodent behavior↗

Critical Thickness for Itinerant Ferromagnetism in Ultrathin Films of SrRuO_3

Ultrathin films of the itinerant ferromagnet SrRuO{sub 3} were studied using transport and magneto-optic polar Kerr effect. We find that below 4 monolayers the films become insulating and their magnetic character changes as they loose their simple ferromagnetic behavior. We observe a strong reduction in the magnetic moment which for 3 monolayers and below lies in the plane of the film. Exchange-bias behavior is observed below the critical thickness, and may point to induced antiferromagnetism in contact with ferromagnetic regions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electron transport in endohedral metallofullerene Ce@C{sub 82} single-molecule transistors

We have investigated the electron transport in endohedral metallofullerene Ce@C{sub 82} single-molecule transistors (SMTs) together with that in reference C{sub 84} SMTs. The vibrational modes (bending and stretching) of the encapsulated single Ce atom in the C{sub 82} cage appear in Coulomb stability diagrams for the single-electron tunneling through Ce@C{sub 82} molecules, demonstrating the single-atom sensitivity of the transport measurements. When a bias voltage larger than 100 mV is applied across the source/drain electrodes, large hysteretic behavior is observed in the current-voltage (I-V) characteristics. At the same time, the pattern in the Coulomb stability diagram is changed. No such hysteretic behavior is observed in the I-V curves of hollow-cage C{sub 84} SMTs, even when the bias voltage exceeds 500 mV. This hysteretic change in the I-V characteristics is induced by a nanomechanical change in the configuration of the Ce@C{sub 82} molecule in the nanogap electrode due to the electric dipole that exists in Ce@C{sub 82}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Surface Composition of NiPd Alloys

Surface segregation in Ni-Pd alloys has been studied using the BFS method for alloys. Not only does the method predict an oscillatory segregation profile but it also indicates that the number of Pd-enriched surface planes can vary as a function of orientation. The segregation profiles were computed as a function of temperature, crystal face, and composition. Pd enrichment of the first layer is observed in (111) and (100) surfaces, and enrichment of the top two layers occurs for (110) surfaces. In all cases, the segregation profile shows oscillations that are actually related to weak ordering tendencies in the bulk. An atom-by-atom analysis was performed to identify the competing mechanisms leading to the observed surface behaviors. Large-scale atomistic simulations were also performed to investigate the temperature dependence of the segregation profiles as well as for analysis of the bulk structures. Finally, the observed surface behaviors are discussed in relation to the bulk phase structure of Ni-Pd alloys, which exhibit a tendency to weakly order.

Noebe, Ronald D.↗

Preliminary Compendium of the Initial Conditions and Evolution of the Fundamental Interactions of SiC with Ag and Pd

Tri-structural isotropic (TRISO) particles are the fuel of choice for very-high temperature reactors. At the core, these spherical particles consist of an inner fuel kernel of UO{sub 2}, UC{sub 2} or a combination of both, which is coated radially outward by successive layers of low density pyrolytic graphite, an inner high density pyrolytic graphite layer, silicon carbide (SiC) and an outer high density pyrolytic graphite layer. SiC is the main diffusion barrier against the release of fission products due to its hardness and high melting point. Irradiation testing of TRISO particles indicates that trace amounts of metallic fission products can damage or potentially escape through the barrier layer. Surrogate experimental studies have previously been performed by various methods seeking to shed light on and explain the diffusion behavior of Ag and Pd. Although some of these experiments have yielded realistic diffusion coefficients the discrepancy of results between different groups is such that the essential details of the diffusive behavior are still to be fully understood. This work aims to understand the fundamental physical and chemical interactions that take place at the interface of SiC and Ag/Pd, and which give rise to the observed diffusion behavior of these metallic species in TRISO particles. Theoretical simulations of the diffusion of Ag through SiC have been exhaustive but typically yield bulk diffusion coefficients that due to the nature of bulk diffusion phenomena (i.e. slow diffusion) the diffusion coefficients are calculated to be orders of magnitude lower than what experimental observations suggest. This in part is due to the difficulty in simulating realistic models that include various polymorphs of SiC, and the dynamical structural transformations that SiC undergoes in the TRISO environment (which are also to be explained). The result is a particularly challenging problem to solve given that the initial conditions of the interactions of Ag and Pd with SiC are difficult to address, both in theoretical models and surrogate experiments. In order to improve these models the approach taken here is to consider fundamental interactions between Ag and SiC that take place in short time scales by varying the initial environmental conditions, i.e. annealing temperature and time, initial amounts of the metallic species (M) Ag, Pd in SiC/M/SiC multilayers. This work aims to understand the fundamental physical and chemical interactions that take place at the interface of SiC and Ag/Pd, and which give rise to the observed diffusion behavior of these metallic species in TRISO particles. In order to do so we have synthesized SiC/Ag/SiC and SiC/Pd/SiC multilayers of various thicknesses by PLD and characterized them using SEM/EDS. Initial results show that upon annealing Ag agglomerates and ruptures the SiC layer to be released. In the case of Pd a strong chemical interaction is deduced from the slow interlayer diffusion and limited release. Further studies using photoelectron spectroscopy and RHEED will be carried out in order obtain detailed information on the chemical and physical transitions that undergo upon annealing of these systems. (authors)

36 MATERIALS SCIENCE↗

Transitional behavior of different energy protons based on Van Allen Probes observations

Understanding the dynamical behavior of ~1 eV to 50 keV ions and identifying the energies at which the morphologies transit are important in that they involve the relative intensities and distributions of the large-scale electric and magnetic fields, the outflow, and recombination rates. However, there have been only few direct observational investigations of the transition in drift behaviors of different energy ions before the Van Allen Probes era. In this paper, we statistically analyze ~1 eV to 50 keV hydrogen (H + ) differential flux distributions near geomagnetic equator by using Van Allen Probes observations to investigate the H + dynamics under the regulation of large-scale electric and magnetic fields. Our survey clearly indicates three types of H + behaviors within different energy ranges, which is consistent with previous theory predictions. Finally, using simple electric and magnetic field models in UBK coordinates, we have further constrained the source regions of different energy ions and their drift directions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Crack Growth Rate and Fracture Toughness Tests on Irradiated Ex-Plant Materials

The performance of structural materials is critical for the safe and economic operation of light water reactors. Exposed to neutron irradiation during service, the reactor core internal materials can undergo significant microstructural and microchemical changes, leading to irradiation hardening and embrittlement. To ensure the structural integrity and functionality of nuclear reactor components during long-term operation, material degradation and damage mechanisms must be understood and managed adequately. In this work, irradiated materials harvested from the decommissioned Zorita reactor were studied for their cracking susceptibility and fracture resistance as a function of irradiation dose up to 47 displacement per atom (dpa). The material is a Type 304 stainless steel sectioned from the baffle plates of this pressurized water reactor with 38 years of service. Crack growth rate and fracture toughness J-resistance (J-R) curve tests were performed in low-corrosion-potential environments at ~315°C. All samples behaved similarly under cyclic loading, and no deteriorated corrosion-fatigue behavior was observed in the test environments. Under constant stress intensity factors, most samples did not show elevated crack growth rates, suggesting an adequate stress corrosion cracking resistance in the test environments. However, an unstable cracking behavior was observed in a 47-dpa sample, resulting in significantly higher crack growth rates than expected at high stress intensity factors. Crack instability was also observed in a 0.06-dpa sample but did not lead to a sustained high crack growth rate. The impact of neutron irradiation was more evident in the fracture toughness J-R curve tests. As the dose increased, the J-R curve declined considerably and became very shallow at high doses. A fully intergranular fracture morphology was also observed among the high-dose samples ruptured in an air atmosphere at room temperature. This brittle fracture mode in the absence of high temperature water environment confirmed a high degree of embrittlement of this material resulting from its service exposure to neutron irradiation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

High-temperature quantum coherence of spinons in a rare-earth spin chain

Conventional wisdom dictates that quantum effects become unimportant at high temperatures. In magnets, when the thermal energy exceeds interactions between atomic magnetic moments, the moments are usually uncorrelated, and classical paramagnetic behavior is observed. This thermal decoherence of quantum spin behaviors is a major hindrance to quantum information applications of spin systems. Remarkably, our neutron scattering experiments on Yb chains in an insulating perovskite crystal defy these conventional expectations. We find a sharply defined spectrum of spinons, fractional quantum excitations of spin-1/2 chains, to persist to temperatures much higher than the scale of the interactions between Yb magnetic moments. The observed sharpness of the spinon continuum’s dispersive upper boundary indicates a spinon mean free path exceeding ≈ 35 inter-atomic spacings at temperatures more than an order of magnitude above the interaction energy scale. We thus discover an important and highly unique quantum behavior, which expands the realm of quantumness to high temperatures where entropy-governed classical behaviors were previously believed to dominate. Our results have profound implications for spin systems in quantum information applications operating at finite temperatures and motivate new developments in quantum metrology.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Continuum of Accretion Burst Behavior in Young Stars Observed by K2

We present 29 likely members of the young ρ Oph or Upper Sco regions of recent star formation that exhibit “accretion burst” type light curves in K2 time series photometry. The bursters were identified by visual examination of their ∼80-day light curves, though all satisfy the M<−0.25 flux asymmetry criterion for burst behavior defined by Cody et al. The burst sources represent ≈9% of cluster members with strong infrared excess indicative of circumstellar material. Higher amplitude burster behavior is correlated with larger inner disk infrared excesses, as inferred from WISE W1−W2 color. The burst sources are also outliers in their large Hα emission equivalent widths. No distinction between bursters and non-bursters is seen in stellar properties such as multiplicity or spectral type. The frequency of bursters is similar between the younger, more compact ρ Oph region, and the older, more dispersed Upper Sco region. The bursts exhibit a range of shapes, amplitudes (∼10%–700%), durations (∼1–10 days), repeat timescales (∼3–80 days), and duty cycles (∼10%–100%). Our results provide important input to models of magnetospheric accretion, in particular, by elucidating the properties of accretion-related variability in the low state between major longer duration events such as EX Lup and FU Ori type accretion outbursts. We demonstrate the broad continuum of accretion burst behavior in young stars—extending the phenomenon to lower amplitudes and shorter timescales than traditionally considered in the theory of pre-main sequence accretion history.

79 ASTRONOMY AND ASTROPHYSICS↗

Singular behavior of jet substructure observables

Jet substructure observables play a central role at the Large Hadron Collider for identifying the boosted hadronic decay products of electroweak scale resonances. The complete description of these observables requires understanding both the limit in which hard substructure is resolved, as well as the limit of a jet with a single hard core. In this paper we study in detail the perturbative structure of two prominent jet substructure observables, N-subjettiness and the energy correlation functions, as measured on background QCD jets. In particular, we focus on the distinction between the limits in which two-prong structure is resolved or unresolved. Depending on the choice of subjet axes, we demonstrate that at fixed order, N-subjettiness can manifest myriad behaviors in the unresolved region: smooth tails, end-point singularities, or singularities in the physical region. The energy correlation functions, by contrast, only have non-singular perturbative tails extending to the end point. We discuss the effect of hadronization on the various observables with Monte Carlo simulation and demonstrate that the modeling of these effects with non-perturbative shape functions is highly dependent on the N-subjettiness axes definitions. Lastly, our study illustrates those regions of phase space that must be controlled for high-precision jet substructure calculations, and emphasizes how such calculations can be facilitated by designing substructure observables with simple singular structures.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A simplified hydrocarbon reaction mechanism for combustion applications

A simplified chemical kinetic reaction mechanism for the combustion of a hydrocarbon fuel is presented and discussed. The observed kinetic behavior of propane combustion as determined in shock tube studies and the calculated kinetic behavior of propane/air mixtures as derived from a detailed propane combustion mechanism were used as a data base for constructing and refining the mechanism. The mechanism contains 13 chemical species and 26 chemical reactions. Numerical studies revealed that the simplified mechanism can reproduce the observed kinetic behavior of propane/air mixtures, including laminar flame speeds, over a wide range of temperatures and pressures. It is anticipated that the mechanism can be used in various combustion applications and provide a more realistic description of the combustion process than can be achieved using global reaction mechanisms.

Jachimowski, C. J.↗

Influence of Annealing on Microstructure, Electrochemical, and Magnetic Properties of Co-Doped SrTiO{sub 3} Nanocubes

Effect of annealing on microstructure, electrochemical, and magnetic properties of Co-doped SrTiO{sub 3} nanocubes obtained by the hydrothermal method was studied. X-ray diffraction (XRD) results of all as-prepared and annealed Co-doped SrTiO{sub 3} samples revealed a cubic perovskite structure with the second phases of SrCO{sub 3} and Co{sub 3}O{sub 4}in as-prepared and annealed SrTi{sub 0.90}Co{sub 0.10}O{sub 3} samples, respectively. Agglomerated nanocubes could be clearly observed in all as-prepared and annealed Co-doped samples by scanning electron microscope (SEM) and transmission electron microscope (TEM). X-ray absorption near edge spectroscopy (XANES) results suggested the presence of Co{sup 2+} cations in as-prepared Co-doped SrTiO{sub 3} samples, while both of Co{sup 2+} and Co{sup 3+} cations were found in annealed Co-doped SrTiO{sub 3} samples. The cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) results of as-prepared and annealed SrTi{sub 1-x}Co{sub x}O{sub 3} (x = 0.05, 0.075 and 0.10) electrodes revealed pseudocapacitor behavior of the Faradaic redox reaction type. The specific capacitance (Csc) was affected by the increase of Co content in all as-prepared and annealed Co-doped SrTiO{sub 3} samples with an excellent cycling stability after 200 cycle test of 97.24% and the highest value of 75.28 F g{sup −1} at 1 A g{sup −1} in an annealed SrTi{sub 0.925}Co{sub 0.075}O{sub 3} electrode. Magnetization measurements at room temperature using vibrating sample magnetometer (VSM) revealed diamagnetic behavior of as-prepared SrTiO{sub 3} sample, whereas paramagnetic behavior was observed in all as-prepared Co-doped SrTiO{sub 3} samples. After annealing, undoped sample exhibited paramagnetic behavior, whereas ferromagnetic behavior was observed in all Co-doped SrTiO{sub 3} samples with the increase of saturation magnetization (M{sub s}) at 10 kOe from 0.58 to 1.63 emu/g and the coercive field (H{sub c}) from 43.71 to 123.87 Oe, suggested to originate from the face-center exchange (FCE) mechanism.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DEFINING THE PLAYERS IN HIGHER-ORDER NETWORKS: PREDICTIVE MODELING FOR REVERSE ENGINEERING FUNCTIONAL INFLUENCE NETWORKS

A difficult problem that is currently growing rapidly due to the sharp increase in the amount of high-throughput data available for many systems is that of determining useful and informative causative influence networks. These networks can be used to predict behavior given observation of a small number of components, predict behavior at a future time point, or identify components that are critical to the functioning of the system under particular conditions. In these endeavors incorporating observations of systems from a wide variety of viewpoints can be particularly beneficial, but has often been undertaken with the objective of inferring networks that are generally applicable. The focus of the current work is to integrate both general observations and measurements taken for a particular pathology, that of ischemic stroke, to provide improved ability to produce useful predictions of systems behavior. A number of hybrid approaches have recently been proposed for network generation in which the Gene Ontology is used to filter or enrich network links inferred from gene expression data through reverse engineering methods. These approaches have been shown to improve the biological plausibility of the inferred relationships determined, but still treat knowledge-based and machine-learning inferences as incommensurable inputs. In this paper, we explore how further improvements may be achieved through a full integration of network inference insights achieved through application of the Gene Ontology and reverse engineering methods with specific reference to the construction of dynamic models of transcriptional regulatory networks. We show that integrating two approaches to network construction, one based on reverse-engineering from conditional transcriptional data, one based on reverse-engineering from in situ hybridization data, and another based on functional associations derived from Gene Ontology, using probabilities can improve results of clustering as evaluated by a predictive model of transcriptional expression levels.

59 BASIC BIOLOGICAL SCIENCES↗

Gasoline fuels properties for multi-mode operation – Observations in a GDI and the CFR engine

The combustion behavior of five full boiling range RON98 gasoline blends was evaluated for multi-mode operation in a GDI and the CFR octane rating engine. The GDI engine tests were conducted with stoichiometric air-fuel ratio in spark-ignition (SI), and with air-diluted homogeneous charge compression ignition (HCCI) mode. In the CFR engine, the knocking combustion was analyzed under standard RON testing conditions at both peak knocking lambda and stoichiometric air-fuel ratios, whereas compression ignited operation was characterized by utilizing the HCCI number test protocol. Disparate knock limited SI and HCCI combustion behavior was observed for the test fuels, despite four of the fuels having the same RON and octane sensitivity. It was found that knock-limited combustion phasing in the GDI engine did not align well with the RON. However, a detailed comparison of knock-limited SI operation in the GDI and CFR engine revealed that a more appropriate effective RON based on a common knock intensity metric (MAPO) and stoichiometric air-fuel ratio resulted in comparable knock characterization between the two engine platforms. Furthermore, the critical intake air temperature and the critical compression ratio were proposed to characterize knock-limited SI operation, while the minimum intake air heating and compression ratio were used to define a fuel's autoignition propensity for compression ignition operation in the GDI and CFR engine, respectively. Finally, each fuel's characteristic compression ratio needed to obtain knock-limited SI (KLSI) and HCCI operation was used to calculate an effective multi-mode octane number (MM-ON) based on the primary reference fuel blends.

33 ADVANCED PROPULSION SYSTEMS↗

“Mn 3 AlN” is Really Mn 4 N

We investigate the synthesis of antiperovskite “Mn 3 AlN” using the published synthesis procedure, as well as several new reaction pathways. In each case, only a combination of antiperovskite Mn 4 N and Mn 5 Al 8 or precursors is obtained. The identity of the obtained antiperovskite phase is unambiguously determined to be Mn4N via synchrotron powder X-ray diffraction (SPXRD), X-ray absorption spectroscopy (XAS), and magnetometry. The experimental results are further supported by thermochemical calculations informed by density functional theory (DFT), which find Mn 3 AlN to be metastable versus decomposition into Mn and AlN. The DFT-based calculations also predict an antiferromagnetic ground state for Mn3AlN. This directly contradicts the previously reported ferromagnetic behavior of "Mn 3 AlN". Instead, the observed magnetic behavior is consistent with ferrimagnetic Mn 4 N. We examine the data in the original publication and conclude that the compound reported to be Mn 3 AlN is in fact Mn 4 N.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗