Search NASA⌕ Search

SEARCH · Search NASA

Results for “point defect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Ab Initio Study of the Effect of Mono-Vacancies on the Metastability of Ga-Stabilized δ-Pu

Most experimental studies on metallic Pu are on the room temperature monoclinic α-phase or the fcc Ga stabilized δ-phase. Stabilized δ-phase Pu-Ga alloys are metastable and exhibit a martensitic phase transformation to α’-phase at low temperatures, or applied shear, with concentrations lower than three atomic percent Ga. By using first principles, we explore the metastability of δ-phase by investigating the structural and electronic behavior induced by Ga alloying and by a mono-vacancy point defect. We find that a site substitutional Ga induces a tetragonal distortion in the lattice affected by hybridization of Ga 4p and Pu 6d states. With the addition of a mono-vacancy, a monoclinic or tetragonal distortion forms locally (dependent on its distance from Ga), and decoupling of the Pu 5f and 6d states and broadening of the 6d states occurs. This response enables hybridization of Pu 6d with the Ga 4p states affecting the mono-vacancy formation energy. Thus, stabilization of the fcc lattice correlates with hybridization of Pu 6d states with Ga 4p states, and this becomes more evident in the presence of a mono-vacancy.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Accuracy of buffered-force QM/MM simulations of silica

We report comparisons between energy-based quantum mechanics/molecular mechanics (QM/MM) and buffered force-based QM/MM simulations in silica. Local quantities—such as density of states, charges, forces, and geometries—calculated with both QM/MM approaches are compared to the results of full QM simulations. We find the length scale over which forces computed using a finite QM region converge to reference values obtained in full quantum-mechanical calculations is ∼10 Å rather than the ∼5 Å previously reported for covalent materials such as silicon. Electrostatic embedding of the QM region in the surrounding classical point charges gives only a minor contribution to the force convergence. While the energy-based approach provides accurate results in geometry optimizations of point defects, we find that the removal of large force errors at the QM/MM boundary provided by the buffered force-based scheme is necessary for accurate constrained geometry optimizations where Si–O bonds are elongated and for finite-temperature molecular dynamics simulations of crack propagation. Moreover, the buffered approach allows for more flexibility, since special-purpose QM/MM coupling terms that link QM and MM atoms are not required and the region that is treated at the QM level can be adaptively redefined during the course of a dynamical simulation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gallium nitride L3 photonic crystal cavities with an average quality factor of 16 900 in the near infrared

Photonic crystal point-defect cavities were fabricated in a GaN free-standing photonic crystal slab. The cavities are based on the popular L3 design, which was optimized using an automated process based on a genetic algorithm, in order to maximize the quality factor. Optical characterization of several individual cavity replicas resulted in an average unloaded quality factor Q = 16 900 at the resonant wavelength λ∼1.3 μm, with a maximal measured Q value of 22 500. The statistics of both the quality factor and the resonant wavelength are well explained by first-principles simulations including fabrication disorder and background optical absorption.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Adatom complexes and self-healing mechanisms on graphene and single-wall carbon nanotubes

Point defects play a role in the functionalization, chemical activation, carrier transport, and nano-engineering of graphitic systems. Here, we use first-principles calculations to describe several processes that alter the properties of graphene and single-wall carbon nanotubes (SWCNTs) in the presence of self-interstitials (SI's). We find that, while two or four SI's are stabilized in hillock-like structures that stay idle unless the system is heated to very high temperatures, clustering of three C adatoms leads to the formation of mobile protrusions on graphene and large enough SWCNTs. For different SI concentrations and SWCNT size, the interplay between mobile and immobile species may favor one of the two competing processes, self-healing or formation of adatom superstructures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Backward-Diode Heterostructure Based on a Zinc-Oxide Nanoarray Formed by Pulsed Electrodeposition and a Cooper-Iodide Film Grown by the SILAR Method

A heterostructure promising for designing a backward diode is formed from a zinc-oxide nanorod array and a nanostructured copper-iodide film. The effect of modes of successive ionic layer adsorption and reaction (SILAR) deposition and the subsequent iodization of CuI films on smooth glass, mica, and fluorine-doped tin oxide (FTO) substrates and on the surface of electrodeposited nanostructured zinc-oxide arrays on the film structure and electrical and optical properties is investigated. A connection between the observed variations in the structure and properties of this material and intrinsic and iodination-induced point defects is established. It is found that the cause and condition for creating a backward-diode heterostructure based on a zinc-oxide nanoarray formed by pulsed electrodeposition and a copper-iodide film grown by the SILAR method is the formation of a p{sup +}-CuI degenerate semiconductor by the excessive iodination of layers of this nanostructured material through its developed surface. The n-ZnO/p{sup +}-CuI barrier heterostructure, which is fabricated for the first time, has the I–V characteristic of a backward diode, the curvature factor of which (γ = 12 V{sup –1}) confirms its high Q factor.

36 MATERIALS SCIENCE↗

The correlation of epitaxial graphene properties and morphology of SiC (0001)

The electronic properties of epitaxial graphene (EG) on SiC (0001) depend sensitively on the surface morphology of SiC substrate. Here, 2–3 layers of graphene were grown on on-axis 6H-SiC with different step densities realized through controlling growth temperature and ambient pressure. We show that epitaxial graphene on SiC (0001) with low step density and straight step edge possesses fewer point defects laying mostly on step edges and higher carrier mobility. A relationship between step density and EG mobility is established. The linear scan of Raman spectra combined with the atomic force microscopy morphology images revealed that the Raman fingerprint peaks are nearly the same on terraces, but shift significantly while cross step edges, suggesting the graphene is not homogeneous in strain and carrier concentration over terraces and step edges of substrates. Thus, control morphology of epitaxial graphene on SiC (0001) is a simple and effective method to pursue optimal route for high quality graphene and will be helpful to prepare wafer sized graphene for device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced von Weizsäcker Wang-Govind-Carter kinetic energy density functional for semiconductors

We propose a new form of orbital-free (OF) kinetic energy density functional (KEDF) for semiconductors that is based on the Wang-Govind-Carter (WGC99) nonlocal KEDF. We enhance within the latter the semi-local von Weizsäcker KEDF term, which is exact for a single orbital. The enhancement factor we introduce is related to the extent to which the electron density is localized. The accuracy of the new KEDF is benchmarked against Kohn-Sham density functional theory (KSDFT) by comparing predicted energy differences between phases, equilibrium volumes, and bulk moduli for various semiconductors, along with metal-insulator phase transition pressures. We also compare point defect and (100) surface energies in silicon for a broad test of its applicability. This new KEDF accurately reproduces the exact non-interacting kinetic energy of KSDFT with only one additional adjustable parameter beyond the three parameters in the WGC99 KEDF; it exhibits good transferability between semiconducting to metallic silicon phases and between various III-V semiconductors without parameter adjustment. Overall, this KEDF is more accurate than previously proposed OF KEDFs (e.g., the Huang-Carter (HC) KEDF) for semiconductors, while the computational efficiency remains at the level of the WGC99 KEDF (several hundred times faster than the HC KEDF). This accurate, fast, and transferable new KEDF holds considerable promise for large-scale OFDFT simulations of metallic through semiconducting materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomistic simulation of damage accumulation and amorphization in Ge

Damage accumulation and amorphization mechanisms by means of ion implantation in Ge are studied using Kinetic Monte Carlo and Binary Collision Approximation techniques. Such mechanisms are investigated through different stages of damage accumulation taking place in the implantation process: from point defect generation and cluster formation up to full amorphization of Ge layers. We propose a damage concentration amorphization threshold for Ge of ∼1.3 × 10{sup 22} cm{sup −3} which is independent on the implantation conditions. Recombination energy barriers depending on amorphous pocket sizes are provided. This leads to an explanation of the reported distinct behavior of the damage generated by different ions. We have also observed that the dissolution of clusters plays an important role for relatively high temperatures and fluences. The model is able to explain and predict different damage generation regimes, amount of generated damage, and extension of amorphous layers in Ge for different ions and implantation conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Innovative nuclear fuels: results and strategy

To facilitate the discovery and design of innovative nuclear fuels, multi-scale models and simulations are used to predict irradiation effects on the thermal conductivity, oxygen diffusivity, and thermal expansion of oxide fuels. The multi-scale approach is illustrated using results on ceramic fuels with a focus on predictions of point defect concentrations, stoichiometry, and phase stability. The high performance computer simulations include coupled heat transport, diffusion, and thermal expansion, gas bubble formation and temperature evolution in a fuel element consisting of UO2 fuel and metallic cladding. The second part of the talk is dedicated to a discussion of an international strategy for developing advanced, innovative nuclear fuels. Four initiative are proposed to accelerate the discovery and design of new materials: (a) Develop an international pool of experts, (b) Create Institutes for Materials Discovery and Design, (c) Create an International Knowledge base for experimental data, models (mathematical expressions), and simulations (codes) and (d) Organize international workshops and conference sessions. The paper ends with a discussion of existing and emerging international collaborations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Further insight into the temperature quenching of photoluminescence from InAs/GaAs self-assembled quantum dots

The possibility of controlling the photoluminescence (PL) intensity and its temperature dependence by means of in-growth and postgrowth technological procedures has been demonstrated for InAs/GaAs self-assembled quantum dots (QDs) embedded in an InGaAs quantum well (QW). The improvement of the QD emission at room temperature (RT), achieved due to a treatment with tetrachloromethane used during the growth, is explained by the reduction of the point defect concentration in the capping layer. It is shown that the PL quenching at RT appears again if the samples are irradiated with protons, above a certain dose. These findings are accounted for by the variations in the quasi-Fermi level position of the minority carriers, which are related to the concentration of trapping centers in the GaAs matrix and have been calculated using a photocarrier statistical model including both radiative and nonradiative recombination channels. By taking into consideration the temperature dependent distribution of the majority and minority carriers between the QDs, embedding QW and GaAs barriers, our calculated results for the PL intensity reproduce very well the experimentally observed trends.

36 MATERIALS SCIENCE↗

DISLOCATION VS. PRODUCTION BIAS REVISITED WITH ACCOUNTED OF RADIATION-INDUCED EMISSION BIAS: VOID SWELLING UNDER ELECTRON AND LIGHT ION IRRADIATION

Extended abstract based on a manuscript submitted to Philosophical Magazine and Philosophical Magazine Letters for publication [1]. The preferential attraction to sinks of self-interstitial atoms (SIAs) over that of vacancies is the fundamental cause of the void swelling, and ultimately the evolution of microstructure in irradiated material. This preferential attraction is described mathematically in terms of bias factors that can be evaluated by solving diffusion equations for point defects (PDs) with drift terms included. The dislocation bias deduced from theory can be on the order of 0.5-1 (increasing with increasing sink strength) in a marked contrast with phenomenological values of 0.01-0.005 assumed in the early rate theory models in attempt to explain experimentally observed swelling rates [2]. Later this became one of the reasons that prompted the development of models based on production bias (PBM) as the main driver for swelling, which assumed that the dislocation bias was much lower than that predicted by theory. However, the PBM in its present form fails to account for important and common observations: the indefinite void growth often observed under cascade irradiation and the swelling saturation observed under high dose irradiation and in void lattices.

74 ATOMIC AND MOLECULAR PHYSICS↗

Electron scattering mechanisms in GZO films grown on a-sapphire substrates by plasma-enhanced molecular beam epitaxy

We report on the mechanisms governing electron transport using a comprehensive set of ZnO layers heavily doped with Ga (GZO) grown by plasma-enhanced molecular-beam epitaxy on a-plane sapphire substrates with varying oxygen-to-metal ratios and Ga fluxes. The analyses were conducted by temperature dependent Hall measurements which were supported by microstructural investigations as well. Highly degenerate GZO layers with n > 5 x 10{sup 20} cm{sup -3} grown under metal-rich conditions (reactive oxygen-to-metal ratio <1) show relatively larger grains ({approx}20-25 nm by x-ray diffraction) with low-angle boundaries parallel to the polar c-direction. For highly conductive GZO layers, ionized-impurity scattering with almost no compensation is the dominant mechanism limiting the mobility in the temperature range from 15 to 330 K and the grain-boundary scattering governed by quantum-mechanical tunnelling is negligible. However, due to the polar nature of ZnO having high crystalline quality, polar optical phonon scattering cannot be neglected for temperatures above 150 K, because it further reduces mobility although its effect is still substantially weaker than the ionized impurity scattering even at room temperature (RT). Analysis of transport measurements and sample microstructures by x-ray diffraction and transmission electron microscopy led to a correlation between the grain sizes in these layers and mobility even for samples with a carrier concentration in the upper 10{sup 20} cm{sup -3} range. In contrast, electron transport in GZO layers grown under oxygen-rich conditions (reactive oxygen-to-metal ratio >1), which have inclined grain boundaries and relatively smaller grain sizes of 10-20 nm by x-ray diffraction, is mainly limited by compensation caused by acceptor-type point-defect complexes, presumably (Ga{sub Zn}-V{sub Zn}), and scattering on grain boundaries. The GZO layers with n <10{sup 20} cm{sup -3} grown under metal-rich conditions with reduced Ga fluxes show a clear signature of grain-boundary scattering governed by the thermionic effect in the temperature-dependent mobility but with much higher RT mobility values compared to the samples grown under oxygen-rich conditions [34 vs. 7.5 cm{sup 2}/V{center_dot}s]. Properties of GZO layers grown under different conditions clearly indicate that to achieve highly conductive GZO, metal-rich conditions instead of oxygen-rich conditions have to be used.

36 MATERIALS SCIENCE↗

Role of H{sub 2}O in the thermal annealing of the E{sub {gamma}}{sup '} center in amorphous silicon dioxide

The model for the annealing of a radiation-induced point defect in silica, the E{sub {gamma}}{sup '} center, is identified in the temperature range (150-550) deg. C. Thermal treatments in controlled atmospheres of water vapor, oxygen, or helium of irradiated amorphous silicon dioxide are carried out. Direct experimental evidences that the annealing of the E{sub {gamma}}{sup '} center is caused by a reaction with diffusing water molecules are found. A rate equation system describing this annealing process is inferred, and its solutions are compared with experimental data to obtain quantitative information. In particular, the activation energy, its distribution and the way the latter is modified by thermal treatments are derived. The process was also established to be reaction limited. The mean activation energy value for the annealing process of the E{sub {gamma}}{sup '} center due to water is found to be 1.23 eV.

36 MATERIALS SCIENCE↗

Two-Dimensional Skyrmions and Other Solitonic Structures in Confinement-Frustrated Chiral Nematics

We explore spatially localized solitonic configurations of a director field, generated using optical realignment and laser-induced heating, in frustrated chiral nematic liquid crystals confined between substrates with perpendicular surface anchoring. We demonstrate that, in addition to recently studied torons and Hopf-fibration solitonic structures (hopfions), one can generate a host of other axially symmetric stable and metastable director field configurations where local twist is matched to the surface boundary conditions through introduction of point defects and loops of singular and nonsingular disclinations. The experimentally demonstrated structures include the so-called 'baby-skyrmions' in the form of double twist cylinders oriented perpendicular to the confining substrates where their double twist field configuration is matched to the perpendicular boundary conditions by loops of twist disclinations. We also generate complex textures with arbitrarily large skyrmion numbers. A simple back-of-the-envelope theoretical analysis based on free energy considerations and the nonpolar nature of chiral nematics provides insights into the long-term stability and diversity of these inter-related solitonic field configurations, including different types of torons, cholestric-finger loops, two-dimensional skyrmions, and more complex structures comprised of torons, hopfions, and various disclination loops that are experimentally observed in a confinement-frustrated chiral nematic system.

36 MATERIALS SCIENCE↗

Sensitizing properties of luminescence centers on the emission of Er{sup 3+} in Si-rich SiO{sub 2} film

In this paper, we report on the luminescence-center (LC)-mediated excitation of Er{sup 3+} as a function of annealing temperature in Er-doped Si-rich SiO{sub 2} (SRO) films fabricated by electron beam evaporation. It is found that the annealing temperature has significant effects on the emission of Er{sup 3+} and the specific optical-active point-defects called LCs within Er-doped SRO films. Different luminescence centers generated by the evolution of microstructures during annealing process act as efficient sensitizers for Er{sup 3+} in the films when the annealing temperature is below 1100 °C. Moreover, the temperature dependence of the energy coupling between LCs and Er{sup 3+} demonstrates the effective phonon-mediated energy transfer process. In addition, when the annealing temperature reaches 1100 °C, the decreased density of activable erbium ions induced by the aggregation of Er will bring detrimental effects on the emission of Er{sup 3+}. It is demonstrated that an appropriate annealing process can be designed to achieve efficiently enhanced emissions from Er{sup 3+} ions by optimizing the density of LCs and the coupling between Er{sup 3+} and LCs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Theoretical and experimental investigations of asymmetric light transport in graded index photonic crystal waveguides

To provide asymmetric propagation of light, we propose a graded index photonic crystal (GRIN PC) based waveguide configuration that is formed by introducing line and point defects as well as intentional perturbations inside the structure. The designed system utilizes isotropic materials and is purely reciprocal, linear, and time-independent, since neither magneto-optical materials are used nor time-reversal symmetry is broken. The numerical results show that the proposed scheme based on the spatial-inversion symmetry breaking has different forward (with a peak value of 49.8%) and backward transmissions (4.11% at most) as well as relatively small round-trip transmission (at most 7.11%) in a large operational bandwidth of 52.6 nm. The signal contrast ratio of the designed configuration is above 0.80 in the telecom wavelengths of 1523.5–1576.1 nm. An experimental measurement is also conducted in the microwave regime: A strong asymmetric propagation characteristic is observed within the frequency interval of 12.8 GHz–13.3 GHz. The numerical and experimental results confirm the asymmetric transmission behavior of the proposed GRIN PC waveguide.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Relationship between Surface Self-Diffusion and Bubble Mobility in Solids: Theory and Atomistic Simulation

Diffusion processes in solids are characterized by complex mechanisms occurring at the atomistic level. The relevant theoretical concepts are sufficiently developed in the case of the diffusion of point defects. At the same time, the diffusion of objects such as clusters of vacancies or nanometer-size cavities in the crystal lattice is described only in terms of continuous-medium approximation. This paper attempts to link the existing theory of diffusion of bubbles in a crystalline matrix with the atomistic description of the process on the basis of the molecular dynamics method. For simplicity, the diffusion of cavities in a two-dimensional Lennard-Jones lattice is considered. A controlled molecular dynamics method is proposed to speed up the direct computation of the diffusion rate of bubbles. Based on the results of simulation, a practical interpretation is given to a parameter of the continuum theory such as the rate of surface self-diffusion. The applicability range of the continuum theory is demonstrated, and principles for the refinement of the theory in the case of minimum-size bubbles are formulated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Radiation-Induced Segregation and Phase Stability in Candidate Alloys for the Advanced Burner Reactor

Major accomplishments of this project were the following: 1) Radiation induced depletion of Cr occurs in alloy D9, in agreement with that observed in austenitic alloys. 2) In F-M alloys, Cr enriches at PAG grain boundaries at low dose (<7 dpa) and at intermediate temperature (400°C) and the magnitude of the enrichment decreases with temperature. 3) Cr enrichment decreases with dose, remaining enriched in alloy T91 up to 10 dpa, but changing to depletion above 3 dpa in HT9 and HCM12A. 4) Cr has a higher diffusivity than Fe by a vacancy mechanism and the corresponding atomic flux of Cr is larger than Fe in the opposite direction to the vacancy flux. 5) Cr concentration at grain boundaries decreases as a result of vacancy transport during electron or proton irradiation, consistent with Inverse Kirkendall models. 6) Inclusion of other point defect sinks into the KLMC simulation of vacancy-mediated diffusion only influences the results in the low temperature, recombination dominated regime, but does not change the conclusion that Cr depletes as a result of vacancy transport to the sink. 7) Cr segregation behavior is independent of Frenkel pair versus cascade production, as simulated for electron versus proton irradiation conditions, for the temperatures investigated. 8) The amount of Cr depletion at a simulated planar boundary with vacancy-mediated diffusion reaches an apparent saturation value by about 1 dpa, with the precise saturation concentration dependent on the ratio of Cr to Fe diffusivity. 9) Cr diffuses faster than Fe by an interstitial transport mechanism, and the corresponding atomic flux of Cr is much larger than Fe in the same direction as the interstitial flux. 10) Observed experimental and computational results show that the radiation induced segregation behavior of Cr is consistent with an Inverse Kirkendall mechanism.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗