Search NASA⌕ Search

SEARCH · Search NASA

Results for “smoothing methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Solar Cycle #24 and the Solar Dynamo

We focus on two solar aspects related to flight dynamics. These are the solar dynamo and long-term solar activity predictions. The nature of the solar dynamo is central to solar activity predictions, and these predictions are important for orbital planning of satellites in low earth orbit (LEO). The reason is that the solar ultraviolet (UV) and extreme ultraviolet (EUV) spectral irradiances inflate the upper atmospheric layers of the Earth, forming the thermosphere and exosphere through which these satellites orbit. Concerning the dynamo, we discuss some recent novel approaches towards its understanding. For solar predictions we concentrate on a solar precursor method, in which the Sun's polar field plays a major role in forecasting the next cycle s activity based upon the Babcock-Leighton dynamo. With a current low value for the Sun s polar field, this method predicts that solar cycle #24 will be one of the lowest in recent times, with smoothed F10.7 radio flux values peaking near 130 plus or minus 30 (2 sigma), in the 2013 timeframe. One may have to consider solar activity as far back as the early 20th century to find a cycle of comparable magnitude. Concomitant effects of low solar activity upon satellites in LEO will need to be considered, such as enhancements in orbital debris. Support for our prediction of a low solar cycle #24 is borne out by the lack of new cycle sunspots at least through the first half of 2007. Usually at the present epoch in the solar cycle (approx. 7+ years after the last solar maximum), for a normal size following cycle, new cycle sunspots would be seen. The lack of their appearance at this time is only consistent with a low cycle #24. Polar field observations of a weak magnitude are consistent with unusual structures seen in the Sun s corona. Polar coronal holes are the hallmarks of the Sun's open field structures. At present, it appears that the polar coronal holes are relatively weak, and there have been many equatorial coronal holes. This appears consistent with a weakening polar field, but coronal hole data must be scrutinized carefully as observing techniques have changed. We also discuss new solar dynamo ideas, and the SODA (SOlar Dynamo Amplitude) index, which provides the user with the ability to track the Sun's hidden, dynamo magnetic fields throughout the various stages of the Sun's cycle. Our solar dynamo ideas are a modernization and rejuvenation of the Babcock-Leighton original idea of a shallow solar dynamo, using modern observations that appear to support their shallow dynamo viewpoint. We are in awe of being able to see an object the size of the Sun undergoing as dramatic a change as our model provides in a few short years. The Sun, however, has undergone changes as rapid as this before! The weather on the Sun is at least as fickle as the weather on the Earth.

Schatten, Kenneth↗

Structural Evaluation of Radially Expandable Cardiovascular Stents Encased in a Polyurethane Film

A method of encasing cardiovascular stents with an expandable polyurethane coating has been developed to provide a smooth homogeneous inner wall allowing for a confluent growth of endothelial cells. In this design, the metal wire stent structure is completely covered by the polyurethane film minimizing biocorrosion of the metal (stainless steel or nitinol), and providing a homogeneous surface for surface treatment and incorporation of various eluting drugs to prevent platelet aggregation while supporting endothelialization. The polyurethane surface was treated with a helium plasma for sterilization and promotes growth of cells. The paper details the performance of the coated film to expand with the metal stent up to 225 % during deployment. We present stress/strain behavior of polyurethane films, and subsequent plasma treatment of the surface and the adhesion of the coating to the stent structure upon expansion. A film of less than 25 tm was found to be sufficient for corrosion resistance and flexibility without producing any excess stress on the stent structure. Straining the film to 225 % and plasma modification did not affect the mechanical and surface properties while allowing for improved biocompatibility as determined by the critical surface tension, surface chemistry, and roughness.

Trigwell, Steve↗

Hybrid Curve Fitting For Reducing Motion Commands In Object Construction

Existing slicing software for additive manufacturing typically requires a triangulated mesh as its input. Triangulated meshes are approximate representations of exact CAD models. Despite the loss in dimensional accuracy, triangulated meshes are used because they are computationally easier to cross-section and offset than the exact geometry in CAD format. When a triangulated object is prepared, the resulting machine instructions include only linear motion commands. Numerous modern motion controllers can move in arc and spline motions; however, the absence of slicing software that supports curvature prevents these commands from being leveraged. To address this limitation, this paper presents a method for the hybrid reconstruction of arcs and splines as a post-processing step to traditional slicing. This method can greatly reduce the number of motion commands required to construct an object by printing smooth curved surfaces. This concise representation of tool-pathing allows for more even extrusion and is computed without a major impact on slicing time.

Wade, Charles↗

FAS multigrid calculations of three dimensional flow using non-staggered grids

Grid staggering is a well known remedy for the problem of velocity/pressure coupling in incompressible flow calculations. Numerous inconveniences occur, however, when staggered grids are implemented, particularly when a general-purpose code, capable of handling irregular three-dimensional domains, is sought. In several non-staggered grid numerical procedures proposed in the literature, the velocity/pressure coupling is achieved by either pressure or velocity (momentum) averaging. This approach is not convenient for simultaneous (block) solvers that are preferred when using multigrid methods. A new method is introduced in this paper that is based upon non-staggered grid formulation with a set of virtual cell face velocities used for pressure/velocity coupling. Instead of pressure or velocity averaging, a momentum balance at the cell face is used as a link between the momentum and mass balance constraints. The numerical stencil is limited to 9 nodes (in 2D) or 27 nodes (in 3D), both during the smoothing and inter-grid transfer, which is a convenient feature when a block point solver is applied. The results for a lid-driven cavity and a cube in a lid-driven cavity are presented and compared to staggered grid calculations using the same multigrid algorithm. The method is shown to be stable and produce a smooth (wiggle-free) pressure field.

Matovic, D.↗

Lithiophilic 3D Porous CuZn Current Collector for Stable Lithium Metal Batteries

Lithium (Li) dendrites formed from nonuniform Li deposition limit potential uses of Li metal as an anode material. Here, we report a lithiophilic 3D porous CuZn current collector that mitigates dendrite formation and realizes the high stability of Li anodes. As opposed to the common metal current collector of copper (Cu), calculations and in situ experiments demonstrate that copper zinc (CuZn) alloys found in commercially available brass are lithiophilic and promote uniform Li deposition. Facile dealloying methods are applied to provide sufficient Li deposition and volume expansion space in brass sheets. Residual CuZn alloys in the framework are found to induce uniform Li deposition and stabilize Li dendrite growth. The optimal current collector (2h-3D CuZn) runs smoothly over 220 cycles at 0.5 mA cm –2 with improved Coulombic efficiencies at high current density. Lastly, this demonstrates an economic and facile CuZn preparation method that unlocks the full potential of Li anodes and provides new Li battery stabilization approaches.

25 ENERGY STORAGE↗

On performance of Krylov smoothing for fully-coupled AMG preconditioners for VMS resistive MHD

Here, this study explores the performance and scaling of a GMRES Krylov method employed as a smoother for an algebraic multigrid (AMG) preconditioned Newton- Krylov solution approach applied to a fully-implicit variational multiscale (VMS) nite element (FE) resistive magnetohydrodynamics (MHD) formulation. In this context a Newton iteration is used for the nonlinear system and a Krylov (GMRES) method is employed for the linear subsystems. The efficiency of this approach is critically dependent on the scalability and performance of the AMG preconditioner for the linear solutions and the performance of the smoothers play a critical role. Krylov smoothers are considered in an attempt to reduce the time and memory requirements of existing robust smoothers based on additive Schwarz domain decomposition (DD) with incomplete LU factorization solves on each subdomain. Three time dependent resistive MHD test cases are considered to evaluate the method. The results demonstrate that the GMRES smoother can be faster due to a decrease in the preconditioner setup time and a reduction in outer GMRESR solver iterations, and requires less memory (typically 35% less memory for global GMRES smoother) than the DD ILU smoother.

97 MATHEMATICS AND COMPUTING↗

Self-healable coatings and methods of making the same

A robust and self-healing coating has been developed by incorporating a thermally self-healing chemical coating on smooth and/or roughened solid. When the chemically coated solid is combined with a lubricating fluid, the material system is capable to repel a broad range of liquids and solids. The thermally self-healing chemical coating may be applied on various industrial metals, glass and plastics, and has shown exceptionally physical and chemical robustness as compared to state-of-the-art liquid-repellent coatings.

Wang, Jing↗

A multigrid method for steady Euler equations on unstructured adaptive grids

A flux-difference splitting type algorithm is formulated for the steady Euler equations on unstructured grids. The polynomial flux-difference splitting technique is used. A vertex-centered finite volume method is employed on a triangular mesh. The multigrid method is in defect-correction form. A relaxation procedure with a first order accurate inner iteration and a second-order correction performed only on the finest grid, is used. A multi-stage Jacobi relaxation method is employed as a smoother. Since the grid is unstructured a Jacobi type is chosen. The multi-staging is necessary to provide sufficient smoothing properties. The domain is discretized using a Delaunay triangular mesh generator. Three grids with more or less uniform distribution of nodes but with different resolution are generated by successive refinement of the coarsest grid. Nodes of coarser grids appear in the finer grids. The multigrid method is started on these grids. As soon as the residual drops below a threshold value, an adaptive refinement is started. The solution on the adaptively refined grid is accelerated by a multigrid procedure. The coarser multigrid grids are generated by successive coarsening through point removement. The adaption cycle is repeated a few times. Results are given for the transonic flow over a NACA-0012 airfoil.

Riemslagh, Kris↗

The distribution of galaxies’ gravitational field stemming from their tidal interaction

We calculate the distribution function of astronomical objects’ (like galaxies and/or smooth halos of different kinds) gravitational fields due to their tidal interaction. For that we apply the statistical method of Chandrasekhar, used originally to calculate the famous Holtzmark distribution. We show that in our approach the distribution function is never Gaussian, its form being dictated by the potential of interaction between objects. This calculation permits us to perform a theoretical analysis of the relation between angular momentum and mass (richness) of the galaxy clusters. To do so, we follow the ideas of Catelan and Theuns and Heavens and Peacock. The main difference is that here we reduce the problem to a discrete many-body case, where all physical properties of the system are determined by the interaction potential V(r{sub ij}). The essence of reduction is that we use the multipole (up to quadrupole here) expansion of Newtonian potential so that all hydrodynamic, “extended” characteristics of an object, such as its density mass, are “integrated out,” leaving its “point-like” characteristics, such as mass and quadrupole moment. In that sense we do not distinguish between galaxies and smooth components such as halos. We compare our theoretical results with observational data.

79 ASTRONOMY AND ASTROPHYSICS↗

Turbomachine Sealing and Secondary Flows: Review of Rotordynamics Issues in Inherently Unsteady Flow Systems With Small Clearances - Part 2

Today's computational methods enable the determination of forces in complex systems, but without field validation data, or feedback, there is a high risk of failure when the design envelope is challenged. The data of Childs and Bently and field data reported in NASA Conference Proceedings serve as sources of design information for the development of these computational codes. Over time all turbomachines degrade and instabilities often develop, requiring responsible, accurate, turbomachine diagnostics with proper decisions to prevent failures. Tam et al. (numerical) and Bently and Muszynska (analytical) models corroborate and implicate that destabilizing factors are related through increases in the fluid-force average circumferential velocity. The stability threshold can be controlled by external swirl and swirl brakes and increases in radial fluid film stiffness (e.g., hydrostatic and ambient pressures) to enhance rotor stability. Also cited are drum rotor self-excited oscillations, where the classic fix is to add a split or severed damper ring or cylindrical damper drum, and the Benkert-Wachter work that engendered swirl brake concepts. For a smooth-operating, reliable, long-lived machine, designers must pay very close attention to sealing dynamics and diagnostic methods. Correcting the seals enabled the space shuttle main engine high-pressure fuel turbopump (SSME HPFTP) to operate successfully.

Hendricks, R. C.↗

Calculation of Dynamical Response Functions Using a Bound-State Method

Abstract We investigate a method to extract response functions (dynamical polarisabilities) directly from a bound-state approach applied to calculations of perturbation-induced reactions. The use of a square-integrable basis leads to a response in the form of a sum of $$\delta $$ δ functions. We integrate this over energy and fit a smooth function to the resulting stepwise-continuous one. Its derivative gives the final approximation to the physical response function. We show that the method reproduces analytical results where known, and analyse the details for a variety of models. We apply it to some simple models, using the stochastic variational method as the numerical method. Albeit we find that this approach, and other numerical techniques, have some difficulties with the threshold behavior in coupled-channel problems with multiple thresholds, its stochastic nature allows us to extract robust results even for such cases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Higher-order temporal integration for the incompressible Navier–Stokes equations in bounded domains

Here, this paper compares and contrasts higher-order, semi-implicit temporal integration strategies for the incompressible Navier–Stokes methods based on spectral deferred corrections applied to certain gauge or auxiliary variable formulations of the equations. Particular focus is placed on the imposition of boundary conditions in the semi-implicit formulation, the accurate treatment of the pressure term, and the smoothness of the numerical solution for different formulations. The main result presented here is the formulation and numerical validation of a single-step, semi-implicit method called spectral deferred pressure corrections, which can in theory obtain arbitrary formal order of accuracy in time. Lastly, numerical results demonstrate up to eighth-order accuracy, scenarios where optimal temporal accuracy is attained, and scenarios where order reduction is observed due to time-dependent boundary conditions.

97 MATHEMATICS AND COMPUTING↗

High-Order Mesh Morphing for Boundary and Interface Fitting to Implicit Geometries

Here, we propose a method that morphs high-order meshes such that their boundaries and interfaces coincide/align with implicitly defined geometries. Our focus is particularly on the case when the target surface is prescribed as the zero isocontour of a smooth discrete function. Common examples of this scenario include using level set functions to represent material interfaces in multimaterial configurations, and evolving geometries in shape and topology optimization. The proposed method formulates the mesh optimization problem as a variational minimization of the sum of a chosen mesh-quality metric using the Target-Matrix Optimization Paradigm (TMOP) and a penalty term that weakly forces the selected faces of the mesh to align with the target surface. The distinct features of the method are use of a source mesh to represent the level set function with sufficient accuracy, and adaptive strategies for setting the penalization weight and selecting the faces of the mesh to be fit to the target isocontour of the level set field. We demonstrate that the proposed method is robust for generating boundary- and interface-fitted meshes for curvilinear domains using different element types in 2D and 3D.

97 MATHEMATICS AND COMPUTING↗

Shock Capturing via Limiting for High-Order Methods including Discontinuous Galerkin

High-order methods, such as discontinuous Galerkin (DG), spectral, and flux reconstruction (FR), are prone to generating unwanted oscillations near shocks and discontinuities. Conventional limiting techniques, while effective in suppressing oscillations near shocks, often compromise accuracy near extrema, where the solution is only first-order accurate. This paper introduces a novel limiting technique for these high-order schemes, aimed at effectively managing shocks while preserving accuracy. The key idea is to expand the standard monotonicity limits to provide “room” near smooth extrema, ensuring that limiting has no effect and thus preserving accuracy. Near a discontinuity, these expanded limits effectively reduce to the original monotonicity limits, suppressing oscillations. Additional motivation is drawn from a formula for the derivative of Radau polynomials, which depicts the behavior of oscillations resulting from discontinuities. This behavior leads to a simplification by applying the limits to the sum of magnitudes of all modes, linear and higher degree. Unlike typical approaches, which rely on successful detection to activate limiting, our limiter depends continuously on the data, there by avoiding potential issues if detection fails. To reduce computing time, efficient criteria for detecting smooth regions where limiting is unnecessary are presented. Combined with detection, the continuous dependence on the data is lost, but the method is more economical. A notable characteristic of the entire process is its simplicity in both concept and implementation. Numerical tests for advection and Euler equations are conducted to demonstrate the effectiveness of the proposed method.

numerical methods↗

Shock Capturing via Limiting for High-Order Methods including Discontinuous Galerkin

High-order methods, such as discontinuous Galerkin (DG), spectral, and flux reconstruction (FR), are prone to generating unwanted oscillations near shocks and discontinuities. Conventional limiting techniques, while effective in suppressing oscillations near shocks, often compromise accuracy near extrema, where the solution is only first-order accurate. This paper introduces a novel limiting technique for these high-order schemes, aimed at effectively managing shocks while preserving accuracy. The key idea is to expand the standard monotonicity limits to provide “room” near smooth extrema, ensuring that limiting has no effect and thus preserving accuracy. Near a discontinuity, these expanded limits effectively reduce to the original monotonicity limits, suppressing oscillations. Additional motivation is drawn from a formula for the derivative of Radau polynomials, which depicts the behavior of oscillations resulting from discontinuities. This behavior leads to a simplification by applying the limits to the sum of magnitudes of all modes, linear and higher degree. Unlike typical approaches, which rely on successful detection to activate limiting, our limiter depends continuously on the data, there by avoiding potential issues if detection fails. To reduce computing time, efficient criteria for detecting smooth regions where limiting is unnecessary are presented. Combined with detection, the continuous dependence on the data is lost, but the method is more economical. A notable characteristic of the entire process is its simplicity in both concept and implementation. Numerical tests for advection and Euler equations are conducted to demonstrate the effectiveness of the proposed method.

numerical methods↗

Lagrangian–Eulerian multidensity topology optimization with the material point method

Abstract In this paper, a hybrid Lagrangian–Eulerian topology optimization (LETO) method is proposed to solve the elastic force equilibrium with the Material Point Method (MPM). LETO transfers density information from freely movable Lagrangian carrier particles to a fixed set of Eulerian quadrature points. This transfer is based on a smooth radial kernel involved in the compliance objective to avoid the artificial checkerboard pattern. The quadrature points act as MPM particles embedded in a lower‐resolution grid and enable a subcell multidensity resolution of intricate structures with a reduced computational cost. A quadrature‐level connectivity graph‐based method is adopted to avoid the artificial checkerboard issues commonly existing in multiresolution topology optimization methods. Numerical experiments are provided to demonstrate the efficacy of the proposed approach.

Li, Yue↗

GENIE(++): A Multi-Block Structured Grid System

The computer code GENIE++ is a continuously evolving grid system containing a multitude of proven geometry/grid techniques. The generation process in GENIE++ is based on an earlier version. The process uses several techniques either separately or in combination to quickly and economically generate sculptured geometry descriptions and grids for arbitrary geometries. The computational mesh is formed by using an appropriate algebraic method. Grid clustering is accomplished with either exponential or hyperbolic tangent routines which allow the user to specify a desired point distribution. Grid smoothing can be accomplished by using an elliptic solver with proper forcing functions. B-spline and Non-Uniform Rational B-splines (NURBS) algorithms are used for surface definition and redistribution. The built in sculptured geometry definition with desired distribution of points, automatic Bezier curve/surface generation for interior boundaries/surfaces, and surface redistribution is based on NURBS. Weighted Lagrance/Hermite transfinite interpolation methods, interactive geometry/grid manipulation modules, and on-line graphical visualization of the generation process are salient features of this system which result in a significant time savings for a given geometry/grid application.

Williams, Tonya↗

A multigrid nonoscillatory method for computing high speed flows

A multigrid method using different smoothers has been developed to solve the Euler equations discretized by a nonoscillatory scheme up to fourth order accuracy. The best smoothing property is provided by a five-stage Runge-Kutta technique with optimized coefficients, yet the most efficient smoother is a backward Euler technique in factored and diagonalized form. The singlegrid solution for a hypersonic, viscous conic flow is in excellent agreement with the solution obtained by the third order MUSCL and Roe's method. Mach 8 inviscid flow computations for a complete entry probe have shown that the accuracy is at least as good as the symmetric TVD scheme of Yee and Harten. The implicit multigrid method is four times more efficient than the explicit multigrid technique and 3.5 times faster than the single-grid implicit technique. For a Mach 8.7 inviscid flow over a blunt delta wing at 30 deg incidence, the CPU reduction factor from the three-level multigrid computation is 2.2 on a grid of 37 x 41 x 73 nodes.

Li, C. P.↗