Search NASA⌕ Search

SEARCH · Search NASA

Results for “structured light”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Minimizing Ecological Impacts of Marine Energy Lighting

Marine energy is poised to become an important renewable energy contributor for the U.S., but widespread deployment of the technology hinges on its benefits outweighing the potential ecological impacts. One stressor marine energy installations introduce is light, which is known to cause varying responses among wildlife and has not yet been addressed as an environmental concern. This review discusses requirements and regulations for similar structures and how lighting design choices can be made to meet these requirements while minimizing environmental consequences. More practical guidance on implementing lighting for marine energy is needed, as well as updated guidelines to reflect technological and research advances. Known responses of wildlife to light are introduced in addition to how the responses of individuals may lead to ecosystem-level changes. The impact of light associated with marine energy installations can be reduced by following basic guidance provided herein, such as removing excess lighting, using lights with high directionality, and employing controls to reduce light levels. Continued research on animal responses to light, such as findings on minimum light levels for animal responses, alongside the development of highly-sensitivity spectral characterization capabilities can further inform lighting guidelines for deploying future open ocean marine energy devices.

54 ENVIRONMENTAL SCIENCES↗

Graphite-epoxy panel compression strength reduction due to local impact

The effects of low velocity impact on the compressive strength of graphite/epoxy structures are reviewed. Extensive tests were conducted on sandwich beams, laminated plates and stiffened panels. Conditions for failures were investigated by impact tests on statically loaded test specimens. Lightly loaded graphite structures (such as aircraft secondary structure) were insensitive to impact damage. In more heavily loaded structures, (such as wing panels), appreciable reductions in compressive strength occurred. The implications of the tests for structural design are discussed by comparing panel masses for designs where ultimate strains were reduced due to impact considerations with the masses of designs with higher ultimate strains. Preliminary test data are presented to show the possibility of improvements in damage to tolerance achievable by using an alternate matrix material.

Card, M. F.↗

Improved Waveguide Laser Array

Improved structure for integrated array of AlxGa1-xAs diode lasers causes array to oscillate predominantly in fundamental supermode (with all units at same phase), thereby producing intense, narrow light beam. New structure differs from older ones in that gain in spaces between laser channels is approximately equal to gain in channels.

Mukai, S.↗

Defect modes and magnetooptical activity of a one-dimensional magnetophotonic crystal

The reflection spectrum of a periodic transverse-magnetized structure containing a finite number of ferromagnet-dielectric periods has been obtained. The influence of a substitutional defect on the reflection spectrum is analyzed for normal incidence of light on the structure. It is shown that the intensity and position of the defect miniband in the bad gap of the spectrum depend on the location of the defect layer in the structure and on its type (magnetic or nonmagnetic). It is found that magnetooptical activity of the defect structure is higher than in a defect-free structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Regulatory Issues and Approaches to Municipal LED Street Lighting Conversions

Municipalities considering energy-efficient light-emitting diode street lights for their jurisdiction face a variety of regulatory issues. This brief describes how cities can successfully address these challenges to achieve multiple advantages. The brief first reviews the structure of street lighting tariffs and the costs and cost assumptions that underlie them. It then lays out pathways that municipalities can take to consider street lighting retrofits if faced by these regulatory barriers. The brief references cases of municipalities’ successes and challenges in pursuing these pathways. For more information, see the resources listed at the end of the brief.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Light-induced switchable adsorption in azobenzene- and stilbene-based porous materials

Despite the long history of porous materials as adsorbates, fundamental limitations remain regarding the efficient capture and release of the gas molecules, with the working capacity of the material often overlooked. In microporous materials, the uptake is dominated by low-pressure adsorption, with much of this being at pressures below the minimum working threshold for many gas utilization processes. Thus, research has focused on several advances in porous materials, including photoresponsive organic units for light-induced switchable adsorption. This process utilizes light to trigger structural or electronic changes, alter the gas uptake, and change the working capacity. Additionally, while a relatively recent development, there is a significant body of research regarding the use of light to control gas storage performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An apparatus for studying scintillator properties at high isostatic pressures

We describe the design and operation of a unique hydraulic press for the study of scintillator materials under isostatic pressure. This press, capable of developing a pressure of a gigapascal, consists of a large sample chamber pressurized by a two-stage hydraulic amplifier. The optical detection of the scintillation light emitted by the sample is performed, through a large aperture optical port, by a photodetector located outside the pressure vessel. In addition to providing essential pressure-dependent studies on the emission characteristics of radioluminescent materials, this apparatus is being developed to elucidate the mechanisms behind the recently observed dependency of light-yield nonproportionality on electronic band structure. The variation of the light output of a Tl:CsI crystal under 511-keV gamma excitation and hydrostatic pressure is given as an example.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Solving The Long-Standing Problem Of Low-Energy Nuclear Reactions At The Highest Microscopic Level. Annual Continuation And Progress Report, August 15, 2014 -- August 14, 2015

The aim of this project is to develop a comprehensive framework that will lead to a fundamental description of both structural properties and reactions of light nuclei in terms of constituent protons and neutrons interacting through nucleon-nucleon (NN) and three-nucleon (3N) forces. This project will provide the research community with the theoretical and computational tools what will enable: an accurate prediction for fusion reactions that power stars and Earth-based fusion facilities; an improved description of the spectroscopy of exotic nuclei, including light Borromean systems; and, a fundamental understanding of the three-nucleon force in nuclear reaction and nuclei at the drip line.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Relativistic nuclear corrections to the spin structure function of the deuteron in the light-cone variables

The relativistic deuteron has been considered in the light-cone formalism as a system of two strongly interacting nucleons (two-nucleon approximation). The technique for the calculation of the average helicity of the proton in the deuteron has been considered in the light-cone variables. A receipt has been pro-posed for the consistent calculation of relativistic nuclear corrections to the average helicity of the proton in the deuteron and to the spin structure function of the deuteron g{sub 1}{sup D}. Relativistic-correction-induced change in the Bjorken sum rule has been discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Breather-like penetration of ultrashort linearly polarized laser into over-dense plasmas

The penetration of an ultrashort laser pulse into an overdense plasma in the relativistic transparency regime is reexamined. The interaction is governed by the Maxwell and relativistic hydrodynamic equations and investigated using a fully implicit energy-conserving numerical scheme. It is found that for a circularly polarized laser, the penetrated pulse has the expected soliton structure. However, for a linearly polarized laser, the penetrated light exhibits a breather structure, and energy exchange between it and the plasma is at twice the laser frequency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental evaluation of direct current magnetron sputtered and high-power impulse magnetron sputtered Cr coatings on SiC for light water reactor applications

Two types of physical vapor deposition Cr coatings were deposited on chemical vapor deposited SiC coupons using conventional direct current magnetron sputtering (DCMS) and high-power impulse magnetron sputtering (HiPIMS) to mitigate the corrosion of SiC, an advanced fuel and structural material in light water nuclear reactor cores. Coating microstructure was characterized using scanning electron microscopy and scanning transmission election microscopy. X-ray diffraction analysis was conducted for phase identification and qualitative analysis of residual stresses. The mechanical integrity of the coatings was evaluated using scratch testing, micro-indentation, and nano-indentation tests. Additionally, the microstructure of the DCMS coating consisted of fine columnar grains with nanoscale intercolumnar channels, while the HiPIMS microstructure was denser and free of any columnar defects. The DCMS coating showed a small tensile residual stress, while the HiPIMS coating was under compressive stress. Both types of coatings showed good mechanical integrity in terms of ductility and adhesion to the substrate. Corrosion performance of the coatings was assessed with a 30-day high temperature water autoclave test. Both types of coatings formed a protective Cr 2 O 3 surface layer 20-30 nm thick during the autoclave test. In the DCMS coating, the columnar defects provided permeation pathways for water penetration resulting in oxide formation in the intercolumnar regions in the interior of the coating. Overall, both types of Cr coatings offer promise for the mitigation of hydrothermal corrosion of SiC in light water reactor operating environments.

36 MATERIALS SCIENCE↗

3 W continuous-wave room temperature single-facet emission from quantum cascade lasers based on nonresonant extraction design approach

A strain-balanced, InP-based quantum cascade laser structure, designed for light emission at 4.6 {mu}m using a new nonresonant extraction design approach, was grown by molecular beam epitaxy. Removal of the restrictive two-phonon resonant condition, currently used in most structure designs, allows simultaneous optimization of several design parameters influencing laser performance. Following the growth, the structure was processed in buried heterostructure. Maximum single-ended continuous-wave optical power of 3 W was obtained at 293 K for devices with stripe dimensions of 5 mmx11.6 {mu}m. Corresponding maximum wallplug efficiency and threshold current density were measured to be 12.7% and 0.86 kA/cm{sup 2}.

36 MATERIALS SCIENCE↗

HCMV gB shares structural and functional properties with gB proteins from other herpesviruses

Glycoprotein B (gB) facilitates HCMV entry into cells by binding receptors and mediating membrane fusion. The crystal structures of gB ectodomains from HSV-1 and EBV are available, but little is known about the HCMV gB structure. Using multiangle light scattering and electron microscopy, we show here that HCMV gB ectodomain is a trimer with the overall shape similar to HSV-1 and EBV gB ectodomains. HCMV gB ectodomain forms rosettes similar to rosettes formed by EBV gB and the postfusion forms of other viral fusogens. Substitution of several bulky hydrophobic residues within the putative fusion loops with more hydrophilic residues reduced rosette formation and abolished cell fusion. We propose that like gB proteins from HSV-1 and EBV, HCMV gB has two internal hydrophobic fusion loops that likely interact with target membranes. Our work establishes structural and functional similarities between gB proteins from three subfamilies of herpesviruses.

60 APPLIED LIFE SCIENCES↗

The crystal structure of {pi}-ErBO{sub 3}: New single-crystal data for an old problem

Single crystals of the orthoborate {pi}-ErBO{sub 3} were synthesized from Er{sub 2}O{sub 3} and B{sub 2}O{sub 3} under high-pressure/high-temperature conditions of 2 GPa and 800 {sup o}C in a Walker-type multianvil apparatus. The crystal structure was determined on the basis of single-crystal X-ray diffraction data, collected at room temperature. The title compound crystallizes in the monoclinic pseudowollastonite-type structure, space group C2/c, with the lattice parameters a=1128.4(2) pm, b=652.6(2) pm, c=954.0(2) pm, and {beta}=112.8(1){sup o} (R{sub 1}=0.0124 and wR{sub 2}=0.0404 for all data). -- graphical abstract: The first satisfying single-crystal structure determination of {pi}-ErBO{sub 3} sheds light on the extensively discussed structure of {pi}-orthoborates. The application of light pressure during the solid state synthesis yielded in high-quality crystals, due to pressure-induced crystallization. Research highlights: {yields} High-quality single crystals of {pi}-ErBO{sub 3} were prepared via high-pressure-induced crystallization. {yields} At least five different space groups for the rare-earth {pi}-orthoborates are reported. {yields} {pi}-ErBO{sub 3} is isotypic to the pseudowollastonite-type CaSiO{sub 3}. {yields} Remaining ambiguities regarding the structure of the rare-earth {pi}-orthoborates are resolved.

36 MATERIALS SCIENCE↗

Edgewise Compression Testing of STIPS-0 (Structurally Integrated Thermal Protection System)

The Structurally Integrated Thermal Protection System (SITPS) task was initiated by the NASA Hypersonics Project under the Fundamental Aeronautics Program to develop a structural load-carrying thermal protection system for use in aerospace applications. The initial NASA concept for SITPS consists of high-temperature composite facesheets (outer and inner mold lines) with a light-weight insulated structural core. An edgewise compression test was performed on the SITPS-0 test article at room temperature using conventional instrumentation and methods in order to obtain panel-level mechanical properties and behavior of the panel. Three compression loadings (10, 20 and 37 kips) were applied to the SITPS-0 panel. The panel behavior was monitored using standard techniques and non-destructive evaluation methods such as photogrammetry and acoustic emission. The elastic modulus of the SITPS-0 panel was determined to be 1.146x106 psi with a proportional limit at 1039 psi. Barrel-shaped bending of the panel and partial delamination of the IML occurred under the final loading.

Brewer, Amy R.↗

Elastic light-scattering modulator: A concept

Simple structure can be used as electrically-controlled light valve, to scatter both transmitted and reflected beams. Its operation is based on physical phenomenon called frosting. Device may be of interest to manufacturers of page composers, alphanumeric displays, flat-panel displays, large-screen televisions, and optical input terminals for computers.

Vilkomerson, D. H. R.↗

Electronic structure of cation-codoped TiO{sub 2} for visible-light photocatalyst applications from hybrid density functional theory calculations

The electronic structures of Mg/Ca- and/or Mo/W- (mono- and co-) doped anatase TiO{sub 2} have been investigated via generalized Kohn-Sham theory with the Heyd-Scuseria-Ernzerhof hybrid functional for exchange-correlation (J. Heyd et al., [J. Chem. Phys. 118, 8207 (2003)], J. Heyd et al., [J. Chem. Phys. 124, 219906 (2006)], and J. Paier et al., [J. Chem. Phys. 125, 249901 (2006)]), in the context of density functional theory. Gap narrowing is small for monodoping, which also creates impuritiy bands in the ''forbidden gap,'' either as acceptor or donor states, limiting possible utility as visible-light photocatalysts. However, codoping of Mg/Ca and Mo/W not only induces appreciable gap narrowing, but also serves to passivate the impurity bands, which can harvest visible-light to a greater extent. Considering ionic radii, Mg and Mo should constitute the best cation-pair.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A design of Si-based nanoplasmonic structure as an antenna and reception amplifier for visible light communication

Visible light communication has been widely investigated due to its larger bandwidth and higher bit rate, and it can combine with the indoor illumination system that makes it more convenient to carry out. Receiving and processing the visible light signal on chip request for nanophotonics devices performing well. However, conventional optical device cannot be used for light-on-chip integration at subwavelength dimensions due to the diffraction limit. Herein, we propose a design of Si-based nanoplasmonic structure as an antenna and reception amplifier for visible light communication based on the interaction between Si nanoparticle and Au nanorod. This device integrates the unique scattering property of high-refractive index dielectric Si nanoparticles, whose scattering spectrum is dependent on the particle size, with the localized surface plasmon resonance of Au nanorod. We calculated the spectra collected by plane detector and near field distribution of nanostructure, and theoretically demonstrate that the proposed device can act as good receiver, amplifier and superlens during the visible light signal receiving and processing. Besides, unlike some other designs of nanoantenna devices focused less on how to detect the signals, our hybrid nanoantenna can realize the transfer between the scattering source and the detector effectively by Au nanorod waveguides. These findings suggest that the designed nanoplasmonic structure is expected to be used in on-chip nanophotonics as antenna, spectral splitter and demultiplexer for visible light communication.

77 NANOSCIENCE AND NANOTECHNOLOGY↗