Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface architecture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Role of epaQ , a Previously Uncharacterized Enterococcus faecalis Gene, in Biofilm Development and Antimicrobial Resistance

Enterococcus faecalis is a commensal of the human gastrointestinal tract; it is also an opportunistic pathogen and one of the leading causes of hospital-acquired infections. E. faecalis produces biofilms that are highly resistant to antibiotics, and it has been previously reported that certain genes of the epa operon contribute to biofilm-associated antibiotic resistance. Despite several studies examining the epa operon, many gene products of this operon remain annotated as hypothetical proteins. Here, we further explore the epa operon; we identified epaQ , currently annotated as encoding a hypothetical membrane protein, as being important for biofilm formation in the presence of the antibiotic daptomycin. Mutants with disruptions of epaQ were more susceptible to daptomycin relative to the wild type, suggesting its importance in biofilm-associated antibiotic resistance. Furthermore, the Δ epaQ mutant exhibited an altered biofilm architectural arrangement and formed small aggregates in liquid cultures. Our cumulative data show that epa mutations result in altered polysaccharide content, increased cell surface hydrophobicity, and decreased membrane potential. Surprisingly, several epa mutations significantly increased resistance to the antibiotic ceftriaxone, indicating that the way in which the epa operon impacts antibiotic resistance is antibiotic dependent. Finally, these results further define the key role of epa in antibiotic resistance in biofilms and in biofilm architecture.

59 BASIC BIOLOGICAL SCIENCES↗

Structural Pain Compensating Flight Control

The problem of control command and maneuver induced structural loads is an important aspect of any control system design. Designers must design the aircraft structure and the control architecture to achieve desired piloted control responses while limiting the imparted structural loads. The classical approach is to build the structure with high margins, restrict control surface commands to known good combinations, and train pilots to follow procedural maneuvering limitations. With recent advances in structural sensing and the continued desire to improve safety and vehicle fuel efficiency, it is both possible and desirable to develop control architectures that enable lighter vehicle weights while maintaining and improving protection against structural damage.

advanced autonomy↗

Fundamental Studies of Tritium Diffusivity and Formation on the Surfaces of Defective LiAlO 2 Pellets

One of the important components of tritium-producing burnable absorber rods (TPBAR) is the γLiAlO 2 layer used in the form of an annular ceramic pellet enriched with the 6 Li isotope. Within TPBAR architecture, this oxide is located between the zircaloy-4 liner and nickel-plated zircaloy-4 tritium getter. When irradiated in a pressurized water reactor (PWR), the 6 Li pellets absorb neutrons, simulating the nuclear characteristics of a burnable absorber rod, and produce tritium ( 3 H, T). The 3 H specie chemically reacts with the metal getter, leading to the formation of a metal hydride. Accurate analysis of the 3 H transport through the ceramic pellets and the barrier/cladding system is hampered by the lack of fundamental data about the hydrogen isotope solubility and diffusivity. In TPBAR architecture, between the γ-LiAlO 2 pellet and the Ni-plated Zircaloy-4 getter (or liner), there is a gas gap. After 3 H diffuses from bulk γ-LiAlO 2 to its surface, it is possible that different 3 H species (such as T, T 2 , T 2 O, and OT, etc.) are formed on this surface which can then get into the gas gap region. Furthermore, upon recombination and desorption molecular tritium can be formed on the γ-LiAlO 2 surface. Therefore, exploring the formation of 3 H-related species on γ-LiAlO 2 surface becomes very important as an integral part of the study of 3H solubility and diffusivity in the pellets.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Low-resistance gateless high electron mobility transistors using three-dimensional inverted pyramidal AlGaN/GaN surfaces

In this letter, three-dimensional gateless AlGaN/GaN high electron mobility transistors (HEMTs) were demonstrated with 54% reduction in electrical resistance and 73% increase in surface area compared with conventional gateless HEMTs on planar substrates. Inverted pyramidal AlGaN/GaN surfaces were microfabricated using potassium hydroxide etched silicon with exposed (111) surfaces and metal-organic chemical vapor deposition of coherent AlGaN/GaN thin films. In addition, electrical characterization of the devices showed that a combination of series and parallel connections of the highly conductive two-dimensional electron gas along the pyramidal geometry resulted in a significant reduction in electrical resistance at both room and high temperatures (up to 300 °C). This three-dimensional HEMT architecture can be leveraged to realize low-power and reliable power electronics, as well as harsh environment sensors with increased surface area.

36 MATERIALS SCIENCE↗

Global Precipitation Measurement Mission: Architecture and Mission Concept

The Global Precipitation Measurement (GPM) Mission is a collaboration between the National Aeronautics and Space Administration (NASA) and the Japanese Aerospace Exploration Agency (JAXA), and other partners, with the goal of monitoring the diurnal and seasonal variations in precipitation over the surface of the earth. These measurements will be used to improve current climate models and weather forecasting, and enable improved storm and flood warnings. This paper gives an overview of the mission architecture and addresses some of the key trades that have been completed, including the selection of the Core Observatory s orbit, orbit maintenance trades, and design issues related to meeting orbital debris requirements.

Bundas, David↗

TChem v2.0 - A Software Toolkit for the Analysis of Complex Kinetic Models

TChem is an open source software library for solving complex computational chemistry problems and analyzing detailed chemical kinetic models. The software provides support for: complex kinetic models for gas-phase and surface chemistry; thermodynamic properties based on NASA polynomials; species production/consumption rates; stable time integrator for solving stiff time ordinary differential equations; and, reactor models such as homogenous gas-phase ignition (with analytical Jacobian matrices), continuously stirred tank reactor, plug-flow reactor. This toolkit builds upon earlier versions that were written in C and featured tools for gas-phase chemistry only. The current version of the software was completely refactored in C++, uses an object-oriented programming model, and adopts Kokkos as its portability layer to make it ready for the next generation computing architectures i.e., multi/many core computing platforms with GPU accelerators. We have expanded the range of kinetic models to include surface chemistry and have added examples pertaining to Continuously Stirred Tank Reactors (CSTR) and Plug Flow Reactor (PFR) models to complement the homogenous ignition examples present in the earlier versions. To exploit the massive parallelism available from modern computing platforms, the current software interface is designed to evaluate samples in parallel, which enables large scale parametric studies, e.g. for sensitivity analysis and model calibration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mission and Implementation of an Affordable Lunar Return

We present an architecture that establishes the infrastructure for routine space travel by taking advantage of the Moon's resources, proximity and accessibility. We use robotic assets on the Moon that are teleoperated from Earth to prospect, test, demonstrate and produce water from lunar resources before human arrival. This plan is affordable, flexible and not tied to any specific launch vehicle solution. Individual surface pieces are small, permitting them to be deployed separately on small launchers or combined together on single large launchers. Schedule is our free variable; even under highly constrained budgets, the architecture permits this program to be continuously pursued using small, incremental, cumulative steps. The end stage is a fully functional, human-tended lunar outpost capable of producing 150 metric tonnes of water per year enough to export water from the Moon and create a transportation system that allows routine access to all of cislunar space. This cost-effective lunar architecture advances technology and builds a sustainable transportation infrastructure. By eliminating the need to launch everything from the surface of the Earth, we fundamentally change the paradigm of spaceflight.

Spudis, Paul↗

Large deployable antenna program. Phase 1: Technology assessment and mission architecture

The program was initiated to investigate the availability of critical large deployable antenna technologies which would enable microwave remote sensing missions from geostationary orbits as required for Mission to Planet Earth. Program goals for the large antenna were: 40-meter diameter, offset-fed paraboloid, and surface precision of 0.1 mm rms. Phase 1 goals were: to review the state-of-the-art for large, precise, wide-scanning radiometers up to 60 GHz; to assess critical technologies necessary for selected concepts; to develop mission architecture for these concepts; and to evaluate generic technologies to support the large deployable reflectors necessary for these missions. Selected results of the study show that deployable reflectors using furlable segments are limited by surface precision goals to 12 meters in diameter, current launch vehicles can place in geostationary only a 20-meter class antenna, and conceptual designs using stiff reflectors are possible with areal densities of 2.4 deg/sq m.

Rogers, Craig A.↗

Deep-Learning based Reconstruction of the Shower Maximum $X_{\mathrm{max}}$ using the Water-Cherenkov Detectors of the Pierre Auger Observatory

The atmospheric depth of the air shower maximum X max is an observable commonly used for the determination of the nuclear mass composition of ultra-high energy cosmic rays. Direct measurements of X max are performed using observations of the longitudinal shower development with fluorescence telescopes. At the same time, several methods have been proposed for an indirect estimation of X max from the characteristics of the shower particles registered with surface detector arrays. In this paper, we present a deep neural network (DNN) for the estimation of X max . The reconstruction relies on the signals induced by shower particles in the ground based water-Cherenkov detectors of the Pierre Auger Observatory. The network architecture features recurrent long short-term memory layers to process the temporal structure of signals and hexagonal convolutions to exploit the symmetry of the surface detector array. We evaluate the performance of the network using air showers simulated with three different hadronic interaction models. Thereafter, we account for long-term detector effects and calibrate the reconstructed X max using fluorescence measurements. Finally, we show that the event-by-event resolution in the reconstruction of the shower maximum improves with increasing shower energy and reaches less than 25 g/cm 2 at energies above 2 × 10 19 eV.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Efficient Routing of Quantum LDPC Codes on Programmable 2D Toric Architectures

Quantum low-density parity-check codes are promising candidates towards scalable fault-tolerant quantum computation. Among these, bivariate bicycle (BB) codes offer superior encoding rates and large code distance compared to surface codes. However, their requirement on long-range stabilizer measurements poses significant challenges for implementation on realistic hardware with limited connectivity, such as superconducting circuit platforms. In this work, we introduce a novel hardware-software co-design that leverages a programmable communication network architecture to address these limitations. Our approach utilizes a 2D toric network of oscillators as a flexible communication fabric linking qubits at each site. Such architecture significantly reduces the number of long-range couplers required from O ( n ) to O (√ n ). Dual-rail qubits, along with native gates including Swap-Wait-Swap gates and beamsplitter SWAPs, ensure that long-range two-qubit gates can be executed with high fidelity and low latency. To further enhance performance, our qubit layout and routing algorithm utilize symmetries of the codes and enable maximum parallelism for long-range two-qubit gates, maintaining a low syndrome extraction cycle duration and scalability over the code length. We perform circuit-level simulation with realistic noise modeling based on experimental hardware parameters, observing an logical error rate per logical qubit per cycle of 3.06% for [[18,4,4]] BB code, 2.6× less than the existing experimental result. These findings provide a practical roadmap and identify key technological advancements needed to achieve low-overhead fault-tolerant quantum computing at scale.

Liu, Kun [Yale Univ., New Haven, CT (United States↗

Genesis of a novel high-rate composite manufacturing process using large-scale additive manufacturing – compression molding (AM-CM) system: Possibilities and limitations

Oak Ridge National Laboratory (ORNL) has developed a highly automated manufacturing process for thermoplastic composites that combines the benefits of Additive Manufacturing and Compression Molding (AM-CM) to produce high-performance functional composite structures at automotive production rates. Here, the AM-CM process creates highly precise preforms by additively placing extruded fiber-filled polymers (with controlled fiber orientations and multi-material configurations) in the desired mold location before undergoing a secondary compression molding process immediately before the preform cools down. Preforms can be in the form of short, long-chopped, or continuous fiber-filled thermoplastic polymers (e.g., CF/GF-filled ABS, PC, LM-PAEK, etc.). The AM-CM process combines the benefits of controlled fiber alignment, that is only achievable in AM-printed parts with the classical CM process, which eliminates porosity and good surface finish. A preform created using AM-CM can integrate various materials to enable additional architectural functionalities, including over-molding, selective stiffening, and the incorporation of electrically or thermally conductive channels. All these advantages come with a fast part production cycle time. The AM-CM process can manufacture multi-material, multi-functional parts in under 3 min, starting from raw material (pellets) to the final product. The novel AM-CM process offers superior microstructural control and enhanced multi-functionality previously unattainable with any other traditional high-rate thermoplastic composite manufacturing method. This work covers the manufacturing concept, system development, materials and applications of AM-CM process in detail.

Kumar, Vipin [Oak Ridge National Laboratory (ORNL)↗

Recycling of waste automotive laminated glass and valorization of polyvinyl butyral through mechanochemical separation

Due to strong binding, optical clarity, adhesion to many surfaces, toughness and flexibility polyvinyl butyral (PVB) resin films are commonly used in the automotive and architectural application as a protective interlayer in the laminated glass. Worldwide million tons of PVB waste generated from end-of-life automotive associated with various environmental issues. Stringent environmental directive, higher land cost eliminates land filling option, needs a study, we have developed a mechanochemical separation process to separate PVB resins from glass and characterized the separated PVB through various techniques, i.e., scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDS), infrared spectroscopy (IR) and nuclear magnetic resonance spectroscopy (NMR). Commercial nonionic surfactants D201 used for the mechanochemical separation purpose. Through parameter optimization following conditions are considered to be the optimum condition; 30 vol% D201, stirring speed of 400 rpm, 35 °C temperature, operation time 1 h, and dilute D201 volume to waste automotive laminated glass weight ratio of ≈25. The technology developed in our laboratory is sustainable, environmentally friendly, techno-economical feasible process, capable of mass production (recycling). - Highlights: • Waste automotive laminated glass and polyvinyl butyral mechanochemically separated. • An economical total recovery and environment-friendly process has been developed. • It is a global problem rather than regional environmental issue has been addressed. • Without using hazardous chemical wastes are being converted to a wealth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly efficient deep desulfurization of fuels by meso/macroporous H3PW12O40/TiO2 at room temperature

Highlights: • A new kind of meso/macroporous structured HPW/TiO{sub 2} catalyst was prepared by monodispersed polystyrene spheres and quaternary ammonium bromide. • Quaternary ammonium bromide with longer alkyl chains length (STAB) was found to be the best mesostructure-directing agent in the synthesis of meso/macroporous HPW/TiO{sub 2} catalyst. • The influence of dosage of macroporous templates (monodispersed polystyrene spheres) and alkyl chains length of quaternary ammonium bromide on the textural of meso/macroporous HPW/TiO{sub 2} catalyst were investigated. • With proper PS spheres and quaternary ammonium bromide usage, disordered macropores arranged periodicity and led relatively larger pore size and pore volume. • The meso/macroporous HPW/TiO{sub 2} materials exhibited enhanced excellent desulfurization performance of thiophenic sulfur in model fuel than other samples. Dibenzothiophene can be completely removed within 2 h at 30 °C. - Abstract: This paper described the synthesis of meso/macroporous phosphotungstic acid (HPW) /TiO{sub 2} catalyst with quaternary ammonium bromide and monodispersed polystyrene spheres (PS) as dual-template. The synthetic parameters, such as concentration of the templates and the alky chain length of quaternary ammonium bromide was studied carefully and optimized to generate catalyst with regulated porous features. The chemical properties of the catalyst was also investigated, X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) measurements confirmed the Keggin-type HPW were highly dispersed on the TiO{sub 2} framework. The optimal meso/macroporous HPW/TiO{sub 2} catalyst exhibited excellent catalytic activity in the oxidation of refractory sulphur compounds such as benzothiophene (BT), dibenzothiophene (DBT), and 4,6-dimethyldibenzothiophene (4,6-DMDBT). DBT was removed within 2 h at 30 °C under selected reaction conditions and the apparent activation energy for DBT oxidation was calculated to be 45.7 kJ/mol. The high ODS reaction rate of catalyst could be attributed to the combination of unique meso/macroporous architecture allowing for efficient mass transport of reactants and products in pore channel and its high surface area, large mesoporous size, and pore volume enabling sufficient exposure of catalytic active sites. Moreover, the meso/macroporous HPW/TiO{sub 2} catalyst also exhibited excellent reusability with no obviously degradation even after eight cycles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Self-seeded growth of very large open-structured zeolite nanosheet assemblies with extraordinary micropore accessibility

Zeolite nanosheets (ZNs) offer improved micropore accessibilities and transport properties for enhanced molecular catalysis and separations. However, practical application of the ZN materials is hampered by the lack of efficient synthesis methods. Here, in this work, a ZN self-seeded method is demonstrated for single-step reproduction of flower-like assemblies of very large MFI ZN plates. The ZN plates are ~60 nm-thick stacks of 4-nm-thick single-crystal sheets. The ZN flower growth involves terrace nucleation on the seed surfaces and subsequent ZN epitaxial growth in [010] orientation directed by a diquaternary agent. The open architecture of the assemblies prevented collapse and agglomeration of ZNs during thermal activation that effectively preserved the interconnected intra-sheet and inter-sheet micropore system. Thus, the ZN assemblies exhibited markedly enhanced molecular adsorption capacity and transport diffusivity for the probing xylene molecules as compared to the conventional crystals. The ZN assembly and its harvestable very large-sized ZNs have the potential for developing high-performance ZN adsorbents, catalysts, and molecular-sieve membranes.

36 MATERIALS SCIENCE↗

Dictating Nanoparticle Assembly via Systems-Level Control of Molecular Multivalency

Nanoparticle assembly can be controlled by multivalent binding interactions between surface ligands, indicating that more precise control over these interactions is important to design complex nanoscale architectures. It has been well-established in natural materials that the arrangement of different molecular species in three dimensions can affect the ability of individual supramolecular units to coordinate their binding, thereby regulating the strength and specificity of their collective molecular interactions. However, in artificial systems, limited examples exist that quantitatively demonstrate how changes in nanoscale geometry can be used to rationally modulate the thermodynamics of individual molecular binding interactions. As a result, the use of nanoscale design features to regulate molecular bonding remains an underutilized design handle to control nanomaterials synthesis. Here in this paper we demonstrate a polymer-coated nanoparticle material where supramolecular bonding and nanoscale structure are used in conjunction to dictate the thermodynamics of their multivalent interactions, resulting in emergent bundling of supramolecular binding groups that would not be expected on the basis of the molecular structures alone. Additionally, we show that these emergent phenomena can controllably alter the superlattice symmetry by using the mesoscale particle arrangement to alter the thermodynamics of the supramolecular bonding behavior. The ability to rationally program molecular multivalency via a systems-level approach therefore provides a major step forward in the assembly of complex artificial structures, with implications for future designs of both nanoparticle- and supramolecular-based materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tailoring thermal insulation architectures from additive manufacturing

Abstract Tailoring thermal transport by structural parameters could result in mechanically fragile and brittle networks. An indispensable goal is to design hierarchical architecture materials that combine thermal and mechanical properties in a continuous and cohesive network. A promising strategy to create such a hierarchical network targets additive manufacturing of hybrid porous voxels at nanoscale. Here we describe the convergence of agile additive manufacturing of porous hybrid voxels to tailor hierarchically and mechanically tunable objects. In one strategy, the uniformly distributed porous silica voxels, which form the basis for the control of thermal transport, are non-covalently interfaced with polymeric networks, yielding hierarchic super-elastic architectures with thermal insulation properties. Another additive strategy for achieving mechanical strength involves the versatile orthogonal surface hybridization of porous silica voxels retains its low thermal conductivity of 19.1 mW m −1 K −1 , flexible compressive recovery strain (85%), and tailored mechanical strength from 71.6 kPa to 1.5 MPa. The printed lightweight high-fidelity objects promise thermal aging mitigation for lithium-ion batteries, providing a thermal management pathway using 3D printed silica objects.

36 MATERIALS SCIENCE↗

A Comparison of Different NDE Signal Processing Techniques Based on Waveform Entropies Applied to Long Fiber Graphite/Epoxy Plates

This study compares different approaches for imaging the internal architecture of graphite/epoxy composites using backscattered ultrasound. Two cases are studied. In the first, near-surface defects in a thin graphite/epoxy plates are imaged. The same backscattered waveforms were used to produce peak-to-peak, logarithm of signal energy, as well as entropy images of different types. All of the entropy images exhibit better border delineation and defect contrast than the either peak-to-peak or logarithm of signal energy. The best results are obtained using the joint entropy of the backscattered waveforms with a reference function. Two different references are examined. The first is a reflection of the insonifying pulse from a stainless steel reflector. The second is an approximate optimum obtained from an iterative parametric search. The joint entropy images produced using this reference exhibit three times the contrast obtained in previous studies. These plates were later destructively analyzed to determine size and location of near-surface defects and the results found to agree with the defect location and shape as indicated by the entropy images. In the second study, images of long carbon graphite fibers (50% by weight) in polypropylene thermoplastic are obtained as a first step toward ultrasonic determination of the distributions of fiber position and orientation.

Entropy Imaging↗

Interface and heterostructure design in polyelemental nanoparticles

Nanomaterials that form as heterostructures have applications in catalysis, plasmonics, and electronics. Multielement nanoparticles can now be synthesized through a variety of routes, but how thermodynamic phases form in such structures and how specific interfaces between them can be designed and synthesized are still poorly understood. We explored how palladium-tin alloys form mixed-composition phases with metals with known but complex miscibilities. Nanoparticles with up to seven elements were synthesized, and many form triphase heterostructures consisting of either three-interface or two-interface architectures. Density functional theory calculations and experimental work were used to determine the balance between the surface and interfacial energies of the observed phases. From these observations, design rules have been established for making polyelemental systems with specific heterostructures, including tetraphase nanoparticles with as many as six junctions.

Chen, Peng-Cheng↗