Search NASA⌕ Search

SEARCH · Search NASA

Results for “vortex generators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Aeroacoustic Testing of UAS-Scale Rotors for a Quadcopter in Hover and Forward Flight

A series of experiments was conducted in an anechoic chamber and wind tunnel to investigatethe noise and performance of an optimum hovering rotor design. The optimum hovering rotorexperimental data set presented in this paper provides the community with a rotor that istheoretically easier to model. Isolated rotors were tested in an anechoic hover chamber as wellas on a representative quadcopter vehicle. In the anechoic chamber, performance and acousticmeasurements were taken at various rotor speeds to compare to those of a commercial-off-the-shelf (COTS) rotor. In the wind tunnel, free-stream velocity, vehicle pitch, and rotor rotationrates were varied to achieve various hover and forward flight operating conditions. Previousinvestigation of a small quadcopter in the Low Speed Aeroacoustic Wind Tunnel (LSAWT) hadidentified possible broadband and interactional noise sources due to rotor airframe interactionand rotor-rotor interaction. These publications identified separation, turbulent boundary layertrailing edge, and bluntness vortex shedding as the main sources of self-generated airfoil noise.By replacing the COTS rotor with an optimum hovering rotor design, self-generated broadbandnoise was reduced for both hover and forward flight conditions for isolated rotor runs. However,the optimum rotors only reduced noise levels for full-vehicle hover conditions, and had little tono reduction in full-vehicle forward flight conditions.

Nicole A Pettingill↗

Formation of x-ray vortex dipoles using a single diffraction pattern and direct phase measurement using interferometry

We have devised a method for generating x-ray vortices by using a diffraction pattern from a simple aperture with illumination wave fronts with spherical curvatures. The interferometry visualized the x-ray vortex dipoles by the direct phase measurement. Our interference technique enabled us to sensitively detect and quantitatively measure various phase dislocations on the x-ray wave fronts, providing useful methodologies for beam diagnostics and materials science.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Towards an advanced vortex flap system: The cavity flap

An extension of the vortex flap concept was explored with the aim of providing high-alpha flight control capability coupled with maneuver drag reduction for highly swept wing configurations. A retractable lower surface flap mounted on a translating hinge is proposed, allowing chordwise extension as well as deflection, the two movements being independently controlled. The frontal cavity formed by the partially extended and deflected flap captures a vortex above a certain angle of attack. The cavity vortex downwash alleviates the effective incidence of the wing leading edge, thus modulating vortex lift; at the same time, the induced suction in the cavity generates thrust. These postulated aerodynamic features of the cavity flap were validated through low speed tunnel pressure and visualization tests on a 65 deg swept oblique wing model, which also provided initial trends of the leading edge vortex alleviation and cavity suction with respect to flap extension, deflection and angle of attack. Force tests on a 60 deg delta model further showed the cavity flap L/D performance to compare favorably with the conventional vortex flap. A two segment flap arrangement with independently control led segments was envisaged for exploiting the vortex modulation capability of the cavity flap for pitch, roll and yaw control, in addition to drag reduction at high angles of attack.

Rao, D. M.↗

An airborne system for vortex flow visualization on the F-18 high-alpha research vehicle

A flow visualization system for the F-18 high-alpha research vehicle is described which allows direct observation of the separated vortex flows over a wide range of flight conditions. The system consists of a smoke generator system, on-board photographic and video systems, and instrumentation. In the present concept, smoke is entrained into the low-pressure vortex core, and vortice breakdown is indicated by a rapid diffusion of the smoke. The resulting pattern is observed using photographic and video images and is correlated with measured flight conditions.

Curry, Robert E.↗

Advances in laser-plasma interactions using intense vortex laser beams

Low-intensity light beams carrying orbital angular momentum (OAM), commonly known as vortex beams, have garnered significant attention due to promising applications in areas ranging from optical trapping to communication. In recent years, there has been a surge in global research exploring the potential of high-intensity vortex laser beams and specifically their interactions with plasmas. Here, this paper provides a comprehensive review of recent advances in this area. Compared with conventional laser beams, intense vortex beams exhibit unique properties such as twisted phase fronts, OAM delivery, hollow intensity distribution, and spatially isolated longitudinal fields. These distinct characteristics give rise to a multitude of rich phenomena, profoundly influencing laser-plasma interactions and offering diverse applications. The paper also discusses future prospects and identifies promising general research areas involving vortex beams. These areas include low-divergence particle acceleration, instability suppression, high-energy photon delivery with OAM, and the generation of strong magnetic fields. With growing scientific interest and application potential, the study of intense vortex lasers is poised for rapid development in the coming years.

high energy density science↗

Progress in tail rotor noise analysis

Helicopter tail rotor noise generated by interactions with the main rotor tip vortices and with the fuselage separation mean wake is investigated. The tail rotor blade-main rotor tip vortex interaction is modeled as an airfoil of infinite span cutting through a moving vortex. The present results are compared to the tail rotor loading and high speed thickness noise and are found to be significant. This noise mechanism is a function of the helicopter operating conditions and the location of the tail relative to the main rotor. Tail rotor self-generated noise due to turbulent vortex shedding from blunt trailing edges is also analyzed.

Chou, S.-T.↗

Flow visualization of vortex interactions in multiple vortex wakes behind aircraft

A flow visualization technique was developed which allows the nature of lift-generated wakes behind aircraft models to be investigated. The technique was applied to models being towed underwater in a ship model basin. Seven different configurations of a small-scale model of a 747 transport aircraft were used to allow observation of typical vortex interactions and merging in multiple vortex wakes. It was established that the motion of the wake vortices is often sensitive to small changes in either wing span loading or model attitude. Landing gear deployement was found to cause a far-field reformation of vorticity behind a model configuration which dissipated concentrated vorticity in the near-field wake. Alleviation of wake vorticity is achievable by configuring the wing span loading to cause the wake vortices to move in paths that result in their interactions and merging. The vortices shed from the horizontal stabilizer always moved down rapidly into the wake and merged with the other vortices, primarily the inboard flap vortices.

Ciffone, D. L.↗

Measurements in Vortex Wakes Shed by Conventional and Modified Subsonic Aircraft

A theoretical and experimental program is underway at NASA Ames Research Center to first obtain a better understanding of the hazard posed by the vortex wakes of subsonic transports, and then to develop methods on how to modify the wake-generating aircraft in order to make the vortices less hazardous. This paper summarizes results obtained in the 80- by 120-Foot Wind Tunnel at NASA Ames Research Center on the characteristics of the vortex wakes that trail from 0.03 scale models of a B-747 and of a DC-10. Measurements are first described that were taken in the wakes with a hot-film anemometer probe, and with wings that range in size from 0.2 to 1.0 times the span of the wake generating models at downstream distances of 81 ft and 162 ft. behind the wake-generating model; i.e., at scale distances of 0.5 and 1.0 mile. The data are then used to evaluate the accuracy of a vortex-lattice method for prediction of the loads induced on following wings by vortex wakes.

Rossow, Vernon J.↗

Aerodynamic Analysis of the Truss-Braced Wing Aircraft Using Vortex-Lattice Superposition Approach

The SUGAR Truss-BracedWing (TBW) aircraft concept is a Boeing-developed N+3 aircraft configuration funded by NASA ARMD FixedWing Project. This future generation transport aircraft concept is designed to be aerodynamically efficient by employing a high aspect ratio wing design. The aspect ratio of the TBW is on the order of 14 which is significantly greater than those of current generation transport aircraft. This paper presents a recent aerodynamic analysis of the TBW aircraft using a conceptual vortex-lattice aerodynamic tool VORLAX and an aerodynamic superposition approach. Based on the underlying linear potential flow theory, the principle of aerodynamic superposition is leveraged to deal with the complex aerodynamic configuration of the TBW. By decomposing the full configuration of the TBW into individual aerodynamic lifting components, the total aerodynamic characteristics of the full configuration can be estimated from the contributions of the individual components. The aerodynamic superposition approach shows excellent agreement with CFD results computed by FUN3D, USM3D, and STAR-CCM+.

vortex lattice method↗

Measurements in a large angle oblique jet impingement flow

Velocity and surface pressure measurements, in the flow field of an obliquely impinging jet, and their interpretation as regards the governing mechanics and the aerodynamic noise generation characteristics of such a flow are reported. A computer controlled probe positioning mechanism allowed the measurement of the velocity magnitude and direction in the plane parallel to the plate. The mean velocity and Reynolds stress components were recorded. Measures of the terms in the momentum equation reveal the character of the pressure gradients in the neighborhood of the stagnation point. The effects of the stagnation streamline location on the vorticity field and the vortex sound considerations are discussed in relationship to the aerodynamic noise generation effects of this flow.

Foss, J. F.↗

Inviscid damping of an elliptical vortex subject to an external strain flow

Inviscid spatial Landau damping is studied experimentally for the case of oscillatory motion of a two-dimensional vortex about its elliptical equilibrium in the presence of an applied strain flow. Here, the experiments are performed using electron plasmas in a Penning–Malmberg trap. They exploit the isomorphism between the two-dimensional Euler equations for an ideal fluid and the drift-Poisson equations for the plasma, where plasma density is the analog of vorticity. Perturbed elliptical vortex states are created using E x B strain flows, which are generated by applying voltages to electrodes surrounding the plasma. Measurements of spatial Landau damping (also called critical-layer damping) are in agreement with previous studies in the absence of an applied strain, where the damping is due to a resonance between the local fluid motion and the vortex oscillations. Interestingly, the damping rate does not change significantly over a wide range of applied strain rates. This can be accurately predicted from the initial vorticity profile, even though the resonant frequency is reduced substantially due to the applied strain. For higher amplitude perturbations, nonlinear trapping oscillations also exhibit behavior similar to the strain-free case. In principle, higher-order effects of the applied strain, such as separatrix crossing of peripheral vorticity and interactions with harmonics of the fundamental resonance, are expected to change the damping rate. However, this occurs only for conditions that are not realized in the experiments described here. Vortex-in-cell simulations are used to investigate the possible roles of these effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Vortex-core properties and vortex-lattice transformation in FeSe

Low-temperature scanning tunneling microscopy and spectroscopy has been used to image the vortex core and the vortex lattice in FeSe single crystals. The local tunneling spectra acquired at the center of elliptical vortex cores display a strong particle-hole asymmetry with spatial oscillation, characteristic of the quantum-limit vortex core. Furthermore, a quasihexagonal vortex lattice at low magnetic field undergoes noticeable rhombic distortions above a certain field similar to ~1.5 T. This field H* also reveals itself as a kink in the magnetic field dependence of the specific heat. The observation of a nearly hexagonal vortex lattice at low field is very surprising for materials with an orthorhombic crystal structure and it is in apparent contradiction with the elliptical shape of the vortex cores. These observations can be directly connected to the multiband nature of superconductivity in this material, provided we attribute them to the suppression of superconducting order parameter in one of the energy bands. Above the field H* the superconducting coherence length for this band can well exceed the intervortex distance which strengthens the nonlocal effects. Therefore, in addition to multiple-band effects, other possible sources that can contribute to the observed evolution of the vortex-lattice structure include nonlocal effects which cause the field-dependent interplay between the symmetry of the crystal and vortex lattice or the magnetoelastic interactions due to the strain field generated by vortices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Near field pressure fluctuations in a circular jet

The vortical structures in shear layers govern many dynamic aspects of the jet, including entrainment of mass, transfer of momentum and noise generation. These structures develop from instability waves and undergo a merging process. Vortex merging reduces the time scale and increases the length scale of the shear layer. At the same time pressure fluctuations are induced by the unsteady motion. These pressure perturbations can exert high level dynamic loading on nearby structures, and radiate to the far field as noise. In this study, the generation mechanism of the pressure fluctuations and the radiation process are examined.

Ho, C. M.↗

Experimental observations of two dimensional blade-vortex interaction

Blade-vortex interaction (BVI) is the source mechanism for a prominent impulsive noise created by rotorcraft. An experimental study of two dimensional BVI, a simplified case representing the most intense and impulsive noise generation condition, was performed to explore the fundamental physics associated with the blade-vortex interaction process. The purpose of this paper is to report cumulative results from this experimental study. The interaction process is shown to involve a combination of effects on the vortex including changes in trajectory and distortion of the vortex core shape. The blade involved undergoes significant transient loading. The effects of the interaction process on the blade and the vortex are shown to be increased by both reduction of blade-to-vortex spacing and increase in blade loading. Calculations of the acoustic field produced by the interaction using measured unsteady blade surface pressure data are presented and show acoustic waveforms similar to those obtained from model helicopter acoustic tests.

Booth, E. R., Jr.↗

A multiple-vortex-ring model of the DFW microburst

A multiple-vortex-ring model of the winds associated with a microburst is verified by matching the model-generated winds to those encountered at the Dallas-Ft. Worth (DFW) microburst. The basis of the model consists of time-invariant vortex ring filaments embedded in irrotational flow. Each ring's viscous core is modeled by distributing the vorticity over a small distance (relative to the ring diameter) radially from the filaments. Parameters such as the size and strength of the vortex rings are identified using a modified Newton-Raphson technique. The parameters identified from the analysis of the DFW microburst encounter indicate a large ring with a radius of 8500 ft and a smaller ring with a radius of 1700 ft.

Schultz, Thomas A.↗

Development of an Aircraft Approach and Departure Atmospheric Profile Generation Algorithm

In support of NASA Virtual Airspace Modeling and Simulation (VAMS) project, an effort was initiated to develop and test techniques for extracting meteorological data from landing and departing aircraft, and for building altitude based profiles for key meteorological parameters from these data. The generated atmospheric profiles will be used as inputs to NASA s Aircraft Vortex Spacing System (AVOLSS) Prediction Algorithm (APA) for benefits and trade analysis. A Wake Vortex Advisory System (WakeVAS) is being developed to apply weather and wake prediction and sensing technologies with procedures to reduce current wake separation criteria when safe and appropriate to increase airport operational efficiency. The purpose of this report is to document the initial theory and design of the Aircraft Approach Departure Atmospheric Profile Generation Algorithm.

Buck, Bill K.↗

Single beam optical vortex tweezers with tunable orbital angular momentum

We propose a single beam method for generating optical vortices with tunable optical angular momentum without altering the intensity distribution. With the initial polarization state varying from linear to circular, we gradually control the torque transferred to the trapped non-absorbing and non-birefringent silica beads. The continuous transition from the maximum rotation speed to zero without changing the trapping potential gives a way to study the complex tribological interactions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The application of vortex theory to the optimum swept propeller

It is shown that an optimum propeller generating a swept wake must satisfy the Betz condition, at least to a first order. A numerical solution for swept propellers generating a rigid helicoidal wake is formulated and some results are presented. These results indicate that sweep has a significant effect on Goldstein's kappa factor, particularly at high advance ratios typical of those at which advanced turboprops operate.

Mccormick, B. W.↗