SEARCH · Search NASA

Results for “AMES LABORATORY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

All sources NASA NTRS DOE OSTI

NASA NTRS1994

Skin friction measurement in complex flows using thin oil film techniques

The NASA Grant NAG2-261 was initiated to support a program of research to study complex flows that occur in flight and laboratory experiments by building, testing and optimizing an on-board technique for direct measurement of surface shear stress using thin oil film techniques. The program of research has proceeded under the supervision of the NASA Ames Research Center and with further cooperation from the NASA Ames-Dryden and NASA Langley Research Centers. In accordance with the original statement of work, the following research milestones were accomplished: (1) design and testing of an internally mounted one-directional skin friction meter to demonstrate the feasibility of the concept; (2) design and construction of a compact instrument capable of measuring skin friction in two directions; (3) study of transitional and fully turbulent boundary layers over a flat plate with and without longitudinal pressure gradients utilizing the compact two-directional skin friction meter; (4) study of the interaction between a turbulent boundary layer and a shock wave generated by a compression corner using the two-directional meter; and (5) flight qualification of the compact meter and accompanying electronic and pneumatic systems, preliminary installation into flight test fixture.

Source record↗

NASA NTRS1996

1996 NASA-ASEE-Stanford Summer Faculty Fellowship Program

As is customary, the final technical report for the NASA-ASEE Summer Faculty Fellowship Program at the Ames Research Center, Dryden Flight Research Center and Stanford University essentially consists of a compilation of the summary technical reports of all the fellows. More extended versions done either as NASA publications, archival papers, or other laboratory reports are not included here. The reader will note that the areas receiving emphasis were the life sciences, astronomy, remote sensing, aeronautics, fluid dynamics/aerophysics, and computer science. Of course, the areas of emphasis vary somewhat from year to year depending on the interests of the most qualified applicants. Once again, the work is of especially high quality. The reports of the first and second year fellows are grouped separately and are arranged alphabetically within each group.

Source record↗

NASA NTRS2008

Portable Device Analyzes Rocks and Minerals

inXitu Inc., of Mountain View, California, entered into a Phase II SBIR contract with Ames Research Center to develop technologies for the next generation of scientific instruments for materials analysis. The work resulted in a sample handling system that could find a wide range of applications in research and industrial laboratories as a means to load powdered samples for analysis or process control. Potential industries include chemical, cement, inks, pharmaceutical, ceramics, and forensics. Additional applications include characterizing materials that cannot be ground to a fine size, such as explosives and research pharmaceuticals.

Source record↗

NASA NTRS2019

Introducing NASA Ames' New Infrared Optical Constant Facility. Determinations of Complex Refractive Indices for Titan Aerosol Analogs and Other Applications

A new optical constant facility has been developed at NASA Ames that will allow the determination of optical constants in the infrared of various materials, analogs of (exo)planetary hazes and cloud particles. Our facility is composed of a Fourier Transform Infrared (FTIR) spectrometer continuously covering the Near-IR to Far-IR range (from 0.74 to 200 μm), coupled to variable angle transmittance and reflectance accessories that allow the characterization of the scattering properties of non-homogeneous samples (laboratory (exo)planetary aerosol analogs, films, slabs of material, crystals, powders, etc.) over a wide incidence and emittance angle range (0-90 degrees). This new experimental setup allows the characterization of angular light distribution in both transmission and reflection measurements, and enables the determination of the complex indices of refraction, n and k, over the full NIR-FIR range via modeling of the laboratory measurements. The resulting refractive indices are critical input parameters in radiative transfer models, microphysical models, cloud models, protoplanetary disk simulations and other models used for the interpretation of observational data from past, current and future (exo)planetary NASA missions. Here we present a description of the facility along with the first determination of optical constants for Titan aerosol analogs produced in the Titan Haze Simulation (THS) experiment on COSmIC, a unique experimental setup developed at NASA Ames that allows the simulation of Titan’s complex atmospheric chemistry at Titan-like temperature (200 K). We also introduce a new study of the optical properties of ammonium-bearing phosphates, potential cloud particles forming in temperate exoplanets and brown dwarfs.

Sciamma-O'Brien, Ella M.↗

DOE OSTI2025

Direct writing of PVBVA/Ti 3 C 2 T x (MXene) triboelectric nanogenerators for energy harvesting and sensing applications

Triboelectric nanogenerators (TENGs) have gained recognition for their potential to convert mechanical energy into electrical energy, making them attractive for applications in healthcare, robotics, and human-device interfaces. However, many TENG devices rely on fluorinated polymers for high charge generation and involve complex fabrication processes, which limit their practicality and environmental sustainability. Here, we developed an eco-friendly composite of poly (vinyl butyral-co-vinyl alcohol-co-vinyl acetate) (PVBVA) and Ti 3 C 2 T x MXene for extrusion printing onto aluminum foil substrates, enabling the additive manufacturing of TENGs. Experimental results indicate that integrating 5.5 mg mL -1 of MXene (P-MX 5.5) into PVBVA resulted in a power density of 760 mW·m -2 , with simultaneous improvements in open-circuit voltage (129 %) and short-circuit current (250 %), demonstrating enhanced charge transfer efficiency. Beyond aluminum foil-based devices, we further explored the fully printed P-MX 5.5 TENG by utilizing silver ink electrodes, eliminating the need for aluminum foil. This fully printed, flexible TENG was successfully used for real-time human motion sensing, demonstrating its ability to detect activities such as walking, running, knee bending, and jumping. Collectively, our additively manufactured and sustainable PVBVA-MXene TENG composites, including both aluminum-based and fully printed versions, show promise for future energy harvesters, sensors, wearable electronics, healthcare, and robotic applications.

Additive manufacturing↗

NASA NTRS2004

Acquisition of a Gas Chromatograph/Mass Spectrometer System for Laboratory Study of Prebiotic Organic Geochemical Processes on the Early Earth, Mars, and Meteorites

This was a major equipment grant that provided funds ($72K) for purchase of a benchtop gas chromatograph-mass spectrometer (GC-MS) for use in experimental studies of prebiotic organic compounds. An Agilent model 689015973 GC-MS was purchased and installed in the PI's lab in August of 2003. The instrument is now being used for a variety of research projects. The primary use of the instrument is to analyze and quantify organic products of laboratory experiments conducted by the PI. One example is shown, which shows organic products (predominantly n-alkanes) formed during Fischer-Tropsch-type abiotic synthesis under hydrothermal conditions. The analytical capabilities of the GC- MS allowed identification of the numerous organic products of this as well as other laboratory experiments. A key use of the instrument in this research is that the mass spectrometer capabilities allow use of isotopically labeled reactants to trace the progress of reactions and evaluate background contaminants. collaborative projects with other scientists involved in exobiology & astrobiology research (e.g., Mitch Schulte, NASA Ames; Katrina Edwards, Woods Hole Oceanographic Institution). For instance, an analysis of membrane lipids of an lithoautotrophic iron-oxidizing bacteria being grown on basalt as a source of metabolic energy, a project where the instrument is being used to evaluate possible biomarker compounds from these organisms is shown. These iron oxidizers are thought to be similar to those living within the ocean crust, and are being investigated as possible analog organisms to those on the early Earth or crust of Mars. The instrument has also been used by an outside investigator (graduate student Brandon Canfeld, Arizona State University) for identification and isotopic characterization of experimental products of abiotic organic synthesis experiments he is conducting with Dr. John Holloway. analysis of quality control samples for other NASA-funded projects. For instance, an analysis of residual hydrocarbon contaminants on the internal surface of the shell of an atmospheric sounding rocket is shown. This analysis was used to help determine the source of the contaminating compounds. In the future, the instrument will continue to be used for quality control analysis in clean rooms and instrument construction facilities within the Laboratory for Atmospheric and Space Physics, where the GC-MS is housed.

McCollom, Thomas↗

DOE OSTI2025

Robust ab initio predictions for dimensionless ratios of 𝐸⁢2 and radius observables. II. Estimation of 𝐸⁢2 transition strengths by calibration to the charge radius

Converged results for 𝐸⁢2 observables are notoriously challenging to obtain in ab initio no-core configuration interaction approaches. Matrix elements of the 𝐸⁢2 operator are sensitive to the large-distance tails of the nuclear wave function, which converge slowly in an oscillator basis expansion. Similar convergence challenges beset ab initio prediction of the nuclear charge radius. However, we exploit systematic correlations between the calculated 𝐸⁢2 and radius observables to yield meaningful predictions for relations among these observables. In particular, we examine ab initio predictions for dimensionless ratios of the form 𝐵⁡(𝐸⁢2)/(𝑒 2 ⁢𝑟 4 ) for nuclei throughout the 𝑝 shell. Finally, meaningful predictions for 𝐸⁢2 transition strengths may then be made by calibrating to the ground-state charge radius if experimentally known.

ab initio calculations↗

NASA NTRS2010

Ares I-X Ground Diagnostic Prototype

The automation of pre-launch diagnostics for launch vehicles offers three potential benefits: improving safety, reducing cost, and reducing launch delays. The Ares I-X Ground Diagnostic Prototype demonstrated anomaly detection, fault detection, fault isolation, and diagnostics for the Ares I-X first-stage Thrust Vector Control and for the associated ground hydraulics while the vehicle was in the Vehicle Assembly Building at Kennedy Space Center (KSC) and while it was on the launch pad. The prototype combines three existing tools. The first tool, TEAMS (Testability Engineering and Maintenance System), is a model-based tool from Qualtech Systems Inc. for fault isolation and diagnostics. The second tool, SHINE (Spacecraft Health Inference Engine), is a rule-based expert system that was developed at the NASA Jet Propulsion Laboratory. We developed SHINE rules for fault detection and mode identification, and used the outputs of SHINE as inputs to TEAMS. The third tool, IMS (Inductive Monitoring System), is an anomaly detection tool that was developed at NASA Ames Research Center. The three tools were integrated and deployed to KSC, where they were interfaced with live data. This paper describes how the prototype performed during the period of time before the launch, including accuracy and computer resource usage. The paper concludes with some of the lessons that we learned from the experience of developing and deploying the prototype.

Schwabacher, Mark A.↗

NASA NTRS2010

Ares I-X Ground Diagnostic Prototype

Automating prelaunch diagnostics for launch vehicles offers three potential benefits. First, it potentially improves safety by detecting faults that might otherwise have been missed so that they can be corrected before launch. Second, it potentially reduces launch delays by more quickly diagnosing the cause of anomalies that occur during prelaunch processing. Reducing launch delays will be critical to the success of NASA's planned future missions that require in-orbit rendezvous. Third, it potentially reduces costs by reducing both launch delays and the number of people needed to monitor the prelaunch process. NASA is currently developing the Ares I launch vehicle to bring the Orion capsule and its crew of four astronauts to low-earth orbit on their way to the moon. Ares I-X will be the first unmanned test flight of Ares I. It is scheduled to launch on October 27, 2009. The Ares I-X Ground Diagnostic Prototype is a prototype ground diagnostic system that will provide anomaly detection, fault detection, fault isolation, and diagnostics for the Ares I-X first-stage thrust vector control (TVC) and for the associated ground hydraulics while it is in the Vehicle Assembly Building (VAB) at John F. Kennedy Space Center (KSC) and on the launch pad. It will serve as a prototype for a future operational ground diagnostic system for Ares I. The prototype combines three existing diagnostic tools. The first tool, TEAMS (Testability Engineering and Maintenance System), is a model-based tool that is commercially produced by Qualtech Systems, Inc. It uses a qualitative model of failure propagation to perform fault isolation and diagnostics. We adapted an existing TEAMS model of the TVC to use for diagnostics and developed a TEAMS model of the ground hydraulics. The second tool, Spacecraft Health Inference Engine (SHINE), is a rule-based expert system developed at the NASA Jet Propulsion Laboratory. We developed SHINE rules for fault detection and mode identification. The prototype uses the outputs of SHINE as inputs to TEAMS. The third tool, the Inductive Monitoring System (IMS), is an anomaly detection tool developed at NASA Ames Research Center and is currently used to monitor the International Space Station Control Moment Gyroscopes. IMS automatically "learns" a model of historical nominal data in the form of a set of clusters and signals an alarm when new data fails to match this model. IMS offers the potential to detect faults that have not been modeled. The three tools have been integrated and deployed to Hangar AE at KSC where they interface with live data from the Ares I-X vehicle and from the ground hydraulics. The outputs of the tools are displayed on a console in Hangar AE, one of the locations from which the Ares I-X launch will be monitored. The full paper will describe how the prototype performed before the launch. It will include an analysis of the prototype's accuracy, including false-positive rates, false-negative rates, and receiver operating characteristics (ROC) curves. It will also include a description of the prototype's computational requirements, including CPU usage, main memory usage, and disk usage. If the prototype detects any faults during the prelaunch period then the paper will include a description of those faults. Similarly, if the prototype has any false alarms then the paper will describe them and will attempt to explain their causes.

Schwabacher, Mark↗

NASA NTRS2002

The Laboratory Production of Complex Organic Molecules in Simulated Interstellar Ices

Dworkin, J. P.↗

NASA NTRS1983

Si:Bi array detectors and astronomical applications of the Goddard 10 micron camera

An improved 4 to 18 micron array camera system was developed at NASA Goddard SFC for astronomical photometry, using an Aerojet Electro Systems Corp. 16 x 16 Si:Bi accumulation mode charge injection device (AMCID) which could be suitable for eventual low-background spaceflight applications. An astronomical observing program using this device was carried out as a collaboration between NASA Goddard (Infrared and Radio Astronomy Branch and Micro Electronics Branch), the Harvard/Smithsonian Center for Astrophysics, and Steward Observatory of the University of Arizona. In 1983 the camera system was revised, and a new Aeroject Si:Bi array with 16 x 16 active pixels was obtained from NASA/Ames Research Center as part of a new scientific collaboration between the Ames and Goddard infrared array research groups. The 16 x 16 device had sufficiently good sensitivity, uniformity and noise characteristics to be used for successful observations at the Mt. Lemmon 60 and 61 inch telescopes in May 1983. Complete laboratory characterization of the 16 x 16 array was carried out in summer of 1983. Initial results indicate that this detector has sensitivity and noise characteristics comparable to other devices from the same generation of Aerojet arrays.

Lamb, Gerald↗

NASA NTRS1962

Development and Use of Mark Sense Record Cards for Recording Medical Data on Pilots Subjected to Acceleration Stress

A TIME-HONORED system of recording medical histories and the data obtained on physical and laboratory examination has been that of writing the information on record sheets that go into a folder for each patient. In order to have information which would be more readily retrieved, 'a program was initiated in 1952 by the U. S. Naval School of Aviation Medicine in connection with their "Care of the Flyer" study to place this information on machine record cards. In 1958, a machine record card method was developed for recording medical data in connection with the astronaut selection program. Machine record cards were also developed by the Aero Medical Laboratory, Wright-Patterson AFB, Ohio, and the Aviation Medical Acceleration Laboratory, Naval Air Development Center, Johnsville, Pennsylvania, for use in connection with a variety of tests including acceleration stress.1 Therefore, a variety of systems resulted in which data of a medical nature could easily be recalled. During the NASA, Ames Research Center centrifuge studies/'S the pilot subjects were interviewed after each centrifuge run, or series of runs, and subjective information was recorded in a log book by the usual history taking methods referred to above. After the methods Were reviewed, it' was recognized that a card system would be very useful in recording data from our pilots after they had been exposed to acceleration stress. Since the acceleration stress cards already developed did not meet our requirements, it was decided a different card was needed.

Smedal, Harald A.↗

DOE OSTI2012

CO 2 -based mixtures as working fluids for geothermal turbines

Sandia National Laboratories (Sandia) is investigating advanced Brayton cycles using supercritical working fluids for application to a variety of heat sources, including geothermal, solar, fossil, and nuclear power. This work, under the Sandia and U.S. Department of Energy (DOE) Office of Advanced Reactor Concepts, is centered on the supercritical CO 2 (S-CO 2 ) power conversion cycle, which has the potential for high efficiency in the temperature range of interest for these heat sources and is very compact—a feature likely to reduce capital costs. As the S-CO 2 program progresses to a full Brayton power-generating cycle, new strategies are being pursued with a focus towards further pushing cycle efficiency.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

NASA NTRS2002

The Laboratory Production of Complex Organic Molecules in Simulated Interstellar Ices

Much of the volatiles in interstellar dense clouds exist in ices surrounding dust grains. Their low temperatures preclude most chemical reactions, but ionizing radiation can drive reactions that produce a suite of new species, many of which are complex organics. The Astrochemistry Lab at NASA-Ames studies the UV radiation processing of interstellar ice analogs to better identify the resulting products and establish links between interstellar chemistry, the organics in meteorites, and the origin of life on Earth. Once identified, the spectral properties of the products can be quantified to assist with the search for these species in space. Of particular interest are findings that UV irradiation of interstellar ice analogs produces molecules of importance in current living organisms, including quiriones, amphiphiles, and amino acids. Quinones play a variety of roles including electron transport and are used by all organisms. Studies show that quinones should be made wherever polycyclic aromatic hydrocarbons are irradiated in interstellar ices (Bernstein et al. 2001). Amphiphiles are also made when mixed molecular ices are irradiated. These amphiphiles self-assemble into membrane-walled vesicles when put in liquid water (Dworkin et al. 2001). Ice irradiation can also produce (Bernstein et al. 2002) and destroy amino acids (Ehrenfreund et al. 2001). Many of the same processes thought to make organics in space should yield products highly enriched in deuterium (D) (Sandford et al. 2001). The high D/H ratios in some interstellar species, and the knowledge that many of the organics in primitive meteorites are D-enriched, suggests that such linkages do exist. By using D as a tracer, we expect to learn more about the different chemical processes occurring in space and their relative importance in the production of different organic compounds and delivery to planetary surfaces.

Dworkin, Jason P.↗

NASA NTRS1987

Experimentation in planetary geology

Laboratory simulations of geological processes on the terrestrial planets are described, summarizing results published during the period 1983-1986. Included are studies of wind-driven processes on Mars and Venus (using the special wind-tunnel facilities at NASA Ames); simulations of shock-induced loss of volatiles from solids; equation-of-state determinations; impact experiments simulating cratering, spallation, regolith formation, and disruption; fluid-flow simulations of channel formation on Mars; and dust studies. The use of the microgravity environment of the Space Station for planetary-geology experiments is briefly considered.

Cintala, Mark J.↗

NASA NTRS1998

Line Intensity and Position Measurements and Derived Band Parameters of the 31103-00001 C-12 O-16(2) Band and its Two Nearby Hot Bands

A set of CO2 spectra from 4500 to 4780/cm has been obtained an Ames with 1500 m path length using a Bomem DA8 FTS. This spectral region contains a number of weak bands and minor isotopic bands that have been studied at high resolution in the reflection spectrum of Venus by Mandin. Improved laboratory intensity and position measurements should assist modeling the Venus reflection spectra and improve understanding of Venus' upper atmosphere. Also, the laboratory measurements will assist DND intensity computations of weaker bands that cannot be measured, but which are nevertheless significant absorbers in Venus' hot, deep CO2, atmosphere. For example, some of the weaker bands that are members of the same polyads as the bands in this presentation lie in the nearby 2.3 microns emission window in Venus' night-side spectrum.

Giver, Lawrence P.↗

DOE OSTI2023

Molybdenum Sleeves Experiments in the Sandia Critical Experiments Facility

Sandia National Laboratories and the Institut de Radioprotection et de Sûreté Nucléaire have collaborated on the design and execution of a set of critical experiments that explore the effects of molybdenum in water-moderated fuel-rod arrays. The molybdenum was included as sleeves on some of the fuel rods in the critical experiment fuel arrays. Approach-to-critical experiments were performed on five configurations of fuel and molybdenum sleeves using the 7uPCX fuel in core hardware that set the triangular fuel rod pitch at 15.494 mm. The experiments are evaluated as benchmark critical experiments for the 2023 edition of the International Criticality Safety Benchmark Evaluation Project (ICSBEP) Handbook as LEU-COMP-THERM-111.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2026

NASA’s Pandora SmallSat Mission: Simulating the Impact of Stellar Photospheric Heterogeneity and Its Correction

Stellar photospheric heterogeneity is a dominant astrophysical systematic impacting exoplanet transmission spectroscopy. NASA’s Pandora SmallSat Mission is designed to address this challenge through contemporaneous visible-band photometry and near-infrared spectroscopy of exoplanet host stars. Here, we present an end-to-end simulation study quantifying Pandora’s ability to infer stellar photospheric properties and correct stellar contamination using out-of-transit observations. We construct eight representative stellar activity scenarios and generate 160 simulated Pandora datasets, incorporating time-dependent stellar spectra, instrument response, and noise. Given accurate models, Bayesian retrievals of joint visible photometry (0.4–0.7 μm) and near-infrared spectroscopy (0.9–1.6 μm, R ≈ 120) recover photospheric temperatures with typical uncertainties of ≈30 K, with no significant bias. Models with two spectral components (i.e., a quiescent photosphere and spots) are strongly favored in 95% of cases; one-component models are preferred when true spot filling factors fall below a detection threshold of ≈0.3%. We propagate the true and inferred stellar parameters to compute true, inferred, and residual contamination signals under physically motivated spot geometries. For simple spot distributions, contamination signals of 10 2 –10 3 ppm are reduced to ≲10 ppm—well below Pandora’s expected transmission spectroscopy precision (30–100 ppm). For more complex spot distributions, geometric degeneracies limit deterministic corrections, leaving residual contamination at the 10 3 ppm level that must be mitigated using additional constraints, such as spot-crossing events and joint stellar–planetary retrievals of transmission spectra. These results define regimes in which stellar contamination can be corrected from stellar observations alone and show how Pandora stellar observations can identify cases where additional information is required.

Astronomy and AstroPhysics↗