Remote sensing applications to hydrologic modeling in the southern Sierra Nevada and portions of the San Joaquin Valley, volume 2
There are no author-identified significant results in this report.
Dozier, J.↗
SEARCH · Search NASA
Results for “Application Models”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A summation and inhibition model of annoyance response to multiple community noise sources
A model of annoyance due to combined noise sources was developed. The model provides for the summation of the subjective magnitudes of annoyance due to the separate noise sources and for the inhibition of the subjective magnitudes of each source by the presence of the other noise sources. The inhibition process is assumed to mathematically obey a power-group transformation. The results of an experiment in which subjects judged the annoyance of 15 minute sessions of combined aircraft and with several other models of combined source annoyance. These comparisons indicated that the model developed herein provides better qualitative and quantitative agreement with experimental responses than the other models. The application of the model to multiple community noises is discussed.
Powell, C. A.↗
The application of model-referenced adaptive control to robotic manipulators
The achievement of quality dynamic performance in manipulator systems is difficult using conventional control methods because of both the inherent geometric nonlinearities of these systems and the dependence of the system dynamics on the characteristics of manipulated objects. A model-referenced adaptive control law is developed for maintaining uniformly good performance over a wide range of motions and payloads. The effectiveness of the approach is demonstrated in several simulations and the system stability as a function of input is investigated. Also developed is a 'learning signal' approach designed to minimize initial transients arising from abrupt changes in the inertial payload.
Dubowsky, S.↗
Geoid anomalies in the vicinity of subduction zones
In the considered investigation, attention is given to the line source model, a surface source model, an application of the model, and a model of the thermal lithosphere associated with marginal basins. It is found that undulations in the altimetrically observed geoid of the southwest Pacific are strongly controlled by positive density anomalies in the subducting slabs of the region and the effects of elevation of the geotherm in behind arc lithosphere (corresponding to young marginal basins). Finer details of slab geometry do not obviously manifest themselves in the observed geoid. Such gravitational effects are quite attenuated at sea level and are apparently mixed with crustal effects, oceanographic noise, etc. It appears that slabs in global composite may contribute substantially to intermediate and long wavelength portions (down to spherical harmonic degree 3 or 4) of the earth's gravity field.
Mcadoo, D. C.↗
Application of thermal model for pan evaporation to the hydrology of a defined medium, the sponge
A technique is presented which estimates pan evaporation from the commonly observed values of daily maximum and minimum air temperatures. These two variables are transformed to saturation vapor pressure equivalents which are used in a simple linear regression model. The model provides reasonably accurate estimates of pan evaporation rates over a large geographic area. The derived evaporation algorithm is combined with precipitation to obtain a simple moisture variable. A hypothetical medium with a capacity of 8 inches of water is initialized at 4 inches. The medium behaves like a sponge: it absorbs all incident precipitation, with runoff or drainage occurring only after it is saturated. Water is lost from this simple system through evaporation just as from a Class A pan, but at a rate proportional to its degree of saturation. The contents of the sponge is a moisture index calculated from only the maximum and minium temperatures and precipitation.
Trenchard, M. H.↗
The application of simulation modeling to the cost and performance ranking of solar thermal power plants
Small solar thermal power systems (up to 10 MWe in size) were tested. The solar thermal power plant ranking study was performed to aid in experiment activity and support decisions for the selection of the most appropriate technological approach. The cost and performance were determined for insolation conditions by utilizing the Solar Energy Simulation computer code (SESII). This model optimizes the size of the collector field and energy storage subsystem for given engine generator and energy transport characteristics. The development of the simulation tool, its operation, and the results achieved from the analysis are discussed.
Rosenberg, L. S.↗
A model of the high-latitude ionospheric convection pattern
Mathematical expressions have been constructed that allow the large-scale global convection characteristics of the high-latitude ionosphere to be reproduced. The model contains no discontinuities in the ion convection velocity and as such should be useful in F region chemical models. The number of variables in the model allow such features as the dayside throat and the Harang discontinuity to be modeled. The applicability of the model to magnetospheric physics is limited by the exclusion of large-magnitude small-scale flow features associated with discrete arcs and by the inability of the model to produce separate flow cells at the same local time.
Heelis, R. A.↗
The application of simulation modeling to the cost and performance ranking of solar thermal power plants
A computer simulation code was employed to evaluate several generic types of solar power systems (up to 10 MWe). Details of the simulation methodology, and the solar plant concepts are given along with cost and performance results. The Solar Energy Simulation computer code (SESII) was used, which optimizes the size of the collector field and energy storage subsystem for given engine-generator and energy-transport characteristics. Nine plant types were examined which employed combinations of different technology options, such as: distributed or central receivers with one- or two-axis tracking or no tracking; point- or line-focusing concentrator; central or distributed power conversion; Rankin, Brayton, or Stirling thermodynamic cycles; and thermal or electrical storage. Optimal cost curves were plotted as a function of levelized busbar energy cost and annualized plant capacity. Point-focusing distributed receiver systems were found to be most efficient (17-26 percent).
Rosenberg, L. S.↗
Precipitation measurement requirements for general circulation climate model development and applications
Global scale diagnostics, regional diagnostics, and satellite IR data are discussed.
Mintz, Y.↗
A two-component rain model for the prediction of attenuation statistics
A two-component rain model has been developed for calculating attenuation statistics. In contrast to most other attenuation prediction models, the two-component model calculates the occurrence probability for volume cells or debris attenuation events. The model performed significantly better than the International Radio Consultative Committee model when used for predictions on earth-satellite paths. It is expected that the model will have applications in modeling the joint statistics required for space diversity system design, the statistics of interference due to rain scatter at attenuating frequencies, and the duration statistics for attenuation events.
Crane, R. K.↗
A geometric model for excavation and modification at terrestrial simple impact craters
A geometric model for the excavation and modification stages of simple crater development is presented. Cavity modification is modelled from an analytical derivation of the dimensions of the so-called transient cavity (Dence, 1973; Dence et al., 1977). The final cavity as it appears in terrestrial craters and the primary elements of excavation are approximated by a variation of the so-called Z model. The applicability of the model is tested with data from the Meteor and Brent craters. In the case of Meteor, the modelled final crater diameter at the original ground plane is within 26 m of the observed value and the modelled breccia lens and the rim crest volumes of the final true crater are within 9.5 percent and 2.5 percent, respectively, of the observed values. The correspondence for the more degraded Brent crater is less precise.
Grieve, R. A. F.↗
Simulations of turbulent mixing and reacting flows and their applications to turbulence modeling
The method of full simulation is applied to reacting turbulent flows. Full simulation has proven of great value as a complement to experiments for the study of nonreacting turbulent flows. It provides insight into the physics of turbulent flows and their modeling. It is natural to try to extend these methods to the simulation of reacting turbulent flows. Because this is one of the first attempts at this type of simulation, a subsidiary goal of this work is to demonstrate the feasibility of using simulation to study turbulent reacting flows. In addition, it is shown that such simulations can be used to provide physical insight into the nature of turbulent combustion and to provide data that will help to construct models that can be used in engineering simulations of turbulent reacting flows.
Ferziger, J. H.↗
Application of turbulence modeling to predict surface heat transfer in stagnation flow region of circular cylinder
A theoretical analysis and numerical calculations for the turbulent flow field and for the effect of free-stream turbulence on the surface heat transfer rate of a stagnation flow are presented. The emphasis is on the modeling of turbulence and its augmentation of surface heat transfer rate. The flow field considered is the region near the forward stagnation point of a circular cylinder in a uniform turbulent mean flow. The free stream is steady and incompressible with a Reynolds number of the order of 10 to the 5th power and turbulence intensity of less than 5 percent. For this analysis, the flow field is divided into three regions: (1) a uniform free-stream region where the turbulence is homogeneous and isotropic; (2) an external viscid flow region where the turbulence is distorted by the variation of the mean flow velocity; and, (3) an anisotropic turbulent boundary layer region over the cylinder surface. The turbulence modeling techniques used are the kappa-epsilon two-equation model in the external flow region and the time-averaged turbulence transport equation in the boundary layer region. The turbulence double correlations, the mean velocity, and the mean temperature within the boundary layer are solved numerically from the transport equations. The surface heat transfer rate is calculated as functions of the free-stream turbulence longitudinal microlength scale, the turbulence intensity, and the Reynolds number.
Wang, Chi R.↗
Turbofan forced mixer lobe flow modeling. Part 3: Application to augment engines
Military engines frequently need large quantities of thrust for short periods of time. The addition of an augmentor can provide such thrust increases but with a penalty of increased duct length and engine weight. The addition of a forced mixer to the augmentor improves performance and reduces the penalty, as well as providing a method for siting the required flame holders. In this report two augmentor concepts are investigated: a swirl-mixer augmentor and a mixer-flameholder augmentor. Several designs for each concept are included and an experimental assessment of one of the swirl-mixer augmentors is presented.
Barber, T.↗
Turbulence modeling
In recent years codes that use the Navier-Stokes equations to compute aerodynamic flows have evolved from computing two-dimensional flows around simple airfoils to computing flows around full scale aircraft configurations. Most flows of engineering interest are turbulent and turbulence models are needed for their prediction. Yet, it is known that present turbulence models are adequate only for simple flows and do poorly in complicated flows such as three-dimensional separation, or large-scale unsteadiness. The same progress that allowed the development of these aerodynamic codes, namely the introduction of supercomputers, has allowed us to compute directly turbulent flows, albeit only for simple flows at moderate Reynolds numbers. These direct turbulence simulations provide us with detailed data that experimentalists were not able to measure. This work is motivated by the fact that data exists for developing better turbulence models and by the need for better models to compute flows of engineering interest. The objective is to develop turbulence models for engineering applications. The model categories that show promise for immediate use are on the two-equation level and the Reynolds-stress level.
Shih, Tsan-Hsing↗
Minimizing the total harmonic distortion for a 3 kW, 20 kHz ac to dc converter using SPICE
This paper describes the SPICE model of a transformer-rectified-filter (TRF) circuit and the Micro-CAP (Microcomputer Circuit Analysis Program) model and their application. The models were used to develop an actual circuit with reduced input current THD. The SPICE analysis consistently predicted the THD improvements in actual circuits as various designs were attempted. In an effort to predict and verify load regulation, the incorporation of saturable inductor models significantly improved the fidelity of the TRF circuit output voltage.
Lollar, Louis F.↗
Applicability of mathematical modeling to problems of environmental physiology
The paper traces the evolution of mathematical modeling and systems analysis from terrestrial research to research related to space biomedicine and back again to terrestrial research. Topics covered include: power spectral analysis of physiological signals; pattern recognition models for detection of disease processes; and, computer-aided diagnosis programs used in conjunction with a special on-line biomedical computer library.
White, Ronald J.↗
Applicability of steady models for hot-star winds
Non-Sobolev models of radiatively driven stellar winds based on a pure-absorption approximation do not have a well-defined steady state. Here the implications of this for flow time-dependence are examined, showing that, under such circumstances, instabilities in the flow attain an absolute character that leads to intrinsic variability. In this case, steady solutions are inherently inapplicable because they do not represent physically realizable states. However, for actual hot-star winds, driving is principally by scattering, not pure absorption. In practice, the relatively weak force associated with slight asymmetries in the diffuse, scattered radiation field may play a crucial role in breaking the solution degeneracy and reducing the instability from an absolute to an advective character.
Owocki, Stanley P.↗