Search NASA⌕ Search

SEARCH · Search NASA

Results for “CHROMATICITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Chromium incorporation into TiO{sub 2} at high pressure

Chromium incorporation into TiO{sub 2} up to 3 GPa at 1300 Degree-Sign C and 900 Degree-Sign C has been studied by XRD as well as TEM. A CaCl{sub 2} type TiO{sub 2} polymorph has been observed in the quenched samples from high pressure. Two different mechanisms of solubility occur in the recovered samples. Chromium replaces titanium on normal octahedral sites but it also occupies interstitial octahedral sites, especially in the samples recovered from higher pressures. Interstitial chromium is responsible for an orthorhombic distortion of the TiO{sub 2} rutile structure in the quenched samples and gives rise to a (1 1 0) twinned CaCl{sub 2}-structured polymorph. This phase is very likely the result of temperature quench at high pressure. The formation of this phase is directly related to the chromium content of the TiO{sub 2} grains. Chromium solubility in TiO{sub 2} increases with increasing the synthesis pressure. TiO{sub 2} is able to accommodate up to 15.3 wt% Cr{sub 2}O{sub 3} at 3 GPa and 1300 Degree-Sign C, compared to 5.7 wt% at atmospheric pressure at the same temperature. - Graphical abstract: Microstructure consisting of twins domains of recovered Cr-doped CaCl{sub 2} type TiO{sub 2} grains synthesised at high pressure. Highlights: Black-Right-Pointing-Pointer Chromium solubility in TiO{sub 2} increases at high pressure. Black-Right-Pointing-Pointer Chromium occupies substitutional and interstitial positions in the rutile structure. Black-Right-Pointing-Pointer Interstitial chromium causes a decrease of the rutile symmetry. Black-Right-Pointing-Pointer An orthorhombic CaCl{sub 2} type structure is observed in the quenched samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Searching for “LiCr{sup II}PO{sub 4}”

The two new phosphates LiCr{sup II}{sub 4}(PO{sub 4}){sub 3} and Li{sub 5}Cr{sup II}{sub 2}Cr{sup III}(PO{sub 4}){sub 4} are discovered as equilibrium phases (ϑ=800 °C) in the quarternary system Li/Cr/P/O. Their crystal structures have been determined from single-crystal X-ray diffraction data (LiCr{sup II}{sub 4}(PO{sub 4}){sub 3}: violet-blue, Pnma (no. 62), Z=4, a=6.175(1) Å, b=14.316(3) Å, c=10.277(2) Å, 100 parameters, R{sub 1}=0.028, wR{sub 2}=0.08, 2060 unique reflections with F{sub o}>4σ(F{sub o}); Li{sub 5}Cr{sup II}{sub 2}Cr{sup III}(PO{sub 4}){sub 4}: greyish-green, P1{sup ¯} (no. 2), Z=1, a=4.9379(7) Å, b=7.917(2) Å, c=8.426(2) Å, α=109.98(2)°, β=90.71(1)°, γ=104.91(1)°, 131 parameters, R{sub 1}=0.022, wR{sub 2}=0.067, 1594 unique reflections with F{sub o}>4σ(F{sub o})). Li{sub 5}Cr{sup II}{sub 2}Cr{sup III}(PO{sub 4}){sub 4} adopts an hitherto unknown structure type. The crystal structure of LiCr{sup II}{sub 4}(PO{sub 4}){sub 3} is isotypic to that of NaCd{sup II}{sub 4}(PO{sub 4}){sub 3} and related to that of the mineral silicocarnotite Ca{sub 5}(PO{sub 4}){sub 2}(SiO{sub 4}). Significant disorder between Li{sup +} and Cr{sup 2+} is observed for both crystal structures. The oxidation states assigned to chromium in these two phosphates are in agreement with UV/vis/NIR absorption spectra and magnetic susceptibility data recorded for both compounds. Instead of “LiCr{sup II}PO{sub 4}” mixtures of LiCr{sup II}{sub 4}(PO{sub 4}){sub 3}, Li{sub 5}Cr{sup II}{sub 2}Cr{sup III}(PO{sub 4}){sub 4}, Cr{sub 2}O{sub 3}, and CrP are observed at equilibrium. Instead of “Li{sub 2}Cr{sup II}P{sub 2}O{sub 7}” four-phase mixtures consisting of Li{sub 9}Cr{sup III}{sub 3}(P{sub 2}O{sub 7}){sub 3}(PO{sub 4}){sub 2}, Li{sub 3}Cr{sup III}{sub 2}(PO{sub 4}){sub 3}, LiCrP{sub 2}O{sub 7}, and CrP were obtained. - Graphical abstract: Investigations on the equilibrium relations in the system Li/Cr/P/O revealed the two hitherto unknown phosphates Li{sub 5}Cr{sup II}{sub 2}Cr{sup III}(PO{sub 4}){sub 4} and LiCr{sup II}{sub 4}(PO{sub 4}){sub 3}. They form instead of “LiCr{sup II}PO{sub 4}”. The crystal structures, magnetic behavior and optical spectra of these phosphates are reported. - Highlights: • The two new phosphates Li{sub 5}Cr{sup II}{sub 2}Cr{sup III}(PO{sub 4}){sub 4} and LiCr{sup II}{sub 4}(PO{sub 4}){sub 3} have been characterized. • Optical spectra and paramagnetism of the these phosphates are explained by AOM. • Li{sub 5}Cr{sup II}{sub 2}Cr{sup III}(PO{sub 4}){sub 4}, LiCr{sup II}{sub 4}(PO{sub 4}){sub 3}, Cr{sub 2}O{sub 3}, and CrP occur instead of “LiCr{sup II}PO{sub 4}”. • LiCr{sup II}{sub 4}(PO{sub 4}){sub 3} is structurally closely related to Silicocarnotite Ca{sub 5}(PO{sub 4}){sub 2}(SiO{sub 4}). • Li{sub 5}Cr{sup II}{sub 2}Cr{sup III}(PO{sub 4}){sub 4} and LiCr{sup II}{sub 4}(PO{sub 4}){sub 3} exhibit significant cation disorder Li{sup +}/Cr{sup 2+}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High pressure synthesis and properties of Bi{sub 0.5}Pb{sub 0.5}CrO{sub 3}: A novel Cr{sup 4+}/Cr{sup 3+} perovskite

We have synthesized a new Bi{sub 0.5}Pb{sub 0.}5CrO{sub 3} perovskite phase by means of a high pressure reaction at 70 kbar and 1000 °C. The distorted orthorhombic perovskite structure can be indexed in the space group Pnma with lattice parameters a=5.4768 (1) Å, b=7.7450 (2) Å, and c=5.4574 (1) Å at room temperature, but undergoes a structural phase transition and enters into a P2{sub 1}/m monoclinic distorted perovskite phase below 150 K with a=5.4173 (2), b=7.7286 (4) and c=5.4930 (3). The structural transition is coincident with the onset of magnetic interactions. At lower temperatures a weak ferromagnetic structure is evident related to antiferromagnetic Cr-spin canting and a spin-glass transition is observed at ≈40 K. The semiconducting-type electrical resistivity is relatively low, associated with Cr{sup 3+}/Cr{sup 4+} electron hopping, and shows considerable magneto-resistance (up to 15%). Due to the low resistivity the dielectric permittivity ε{sub r} could be determined only below T<80 K to be ≈300 and did not show any strong temperature-dependence. Ferroelectricity was not detected in the T-range investigated and no magnetocapacitance effects were observed. - Graphical abstract: A new Bi{sub 0.5}Pb{sub 0.}5CrO{sub 3} perovskite phase has been synthesized under high pressure (70 kbar) and high temperature (1000 °C) conditions. The room temperature structure is orthorhombic and can be indexed in the space group Pnma but below 150 K undergoes a structural phase transition and enters into a P2{sub 1}/m monoclinic distorted perovskite phase. The structural transition is coincident with the onset of magnetic interactions. Mott variable-range hopping charge transport and magnetoresistance effects are evident. - Highlights: • A new Bi{sub 0.5}Pb{sub 0.}5CrO{sub 3} perovskite has been synthesized under HP/HT conditions. • An orthorhombic-to monoclinic phase transition takes place at 150 K. • The structural transition is coincident with the onset of magnetic interactions. • Mott variable-range hopping charge transport and magnetoresistance are evident.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation enthalpies of LaLn'O{sub 3} (Ln'=Ho, Er, Tm and Yb) interlanthanide perovskites

High-temperature oxide melt solution calorimetry using 3Na{sub 2}O·MoO{sub 3} at 802 °C was performed for interlanthanide perovskites LaLn'O{sub 3} (Ln'=Ho, Er, Tm and Yb) and lanthanide oxides (La{sub 2}O{sub 3}, Ho{sub 2}O{sub 3}, Er{sub 2}O{sub 3}, Tm{sub 2}O{sub 3} and Yb{sub 2}O{sub 3}). The enthalpies of formation of these interlanthanide perovskites from binary lanthanide oxides at room temperature (25 °C) were determined to be −8.3±3.4 kJ/mol for LaHoO{sub 3}, −9.9±3.0 kJ/mol for LaErO{sub 3}, −10.8±2.7 kJ/mol for LaTmO{sub 3} and −12.3±2.9 kJ/mol for LaYbO{sub 3}. There is a roughly linear relationships between these enthalpy values and the tolerance factor for these and for other LaM{sup 3+}O{sub 3} (M=In, Sc, Ga, Al, Fe and Cr) perovskites, confirming that the distortion of the perovskites as results from ionic radius difference of A-site and B-site cations, is the main factor determining the stability of these compounds. - Graphical abstract: A linear relationship between the enthalpy of formation and the tolerance factor for interlanthanide LaLn'O{sub 3} (Ln'=Ho, Er, Tm, and Yb) and other LaM{sup 3+}O{sub 3} (M=In, Sc, Ga, Al, Fe and Cr) perovskites. - Highlights: • Interlanthanide perovskites were synthesized by solid state reactions. • Their enthalpies of formation were measured by oxide melt solution calorimetry. • ΔH{sub f,ox} shows a linear relationship with tolerance factor.

36 MATERIALS SCIENCE↗

Photocatalytic H{sub 2} production from spinels ZnGa{sub 2−x}Cr{sub x}O{sub 4} (0≤x≤2) solid solutions

Solid solutions of ZnGa{sub 2−x}Cr{sub x}O{sub 4} (0≤x≤2) were successfully prepared by solid state reactions. Introducing Cr into ZnGa{sub 2}O{sub 4} crystal structure significantly improves its light absorption and greatly enhances its photocatalytic activity. An optimized Cr content (x=1.5 for ZnGa{sub 0.5}Cr{sub 1.5}O{sub 4}) was found for the solid solutions with the highest photocatalytic hydrogen production rate (~775 μmol/h). Compositional analysis suggests there is a strong enrichment of Cr at the surface of sample ZnGa{sub 0.5}Cr{sub 1.5}O{sub 4} compared with other samples. Theoretical calculations suggest their electronic structures involve spin-polarized conduction band (CB) and valence band (VB) that are mainly composed of Cr 3d orbitals. The highest photocatalytic activity observed in ZnGa{sub 0.5}Cr{sub 1.5}O{sub 4} is probably due to the higher Cr content at the surface that favors the Cr 3d orbital overlapping. - Graphical abstract: Electronic structure and density of states of ZnGa{sub 2}O{sub 4} after partially substituting Ga with Cr. - Highlights: • Complete solid solution can be formed between ZnGa{sub 2}O{sub 4} and ZnCr{sub 2}O{sub 4}. • Optical properties and catalytic activity are improved by adding Cr into ZnGa{sub 2}O{sub 4}. • An optimized Cr content exists for the highest activity. • Enrichment of Cr in the surface is beneficial for a better performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

MAX phase – Alumina composites via elemental and exchange reactions in the Ti{sub n+1}AC{sub n} systems (A=Al, Si, Ga, Ge, In and Sn)

Extension of the aluminothermal exchange reaction synthesis of M{sub n+1}AX{sub n} phases to systems where the element ‘A’ is not the reducing agent was investigated in systems TiO{sub 2}–A–Al–C for A=Al, Si, Ga, Ge, In and Sn as well as Cr{sub 2}O{sub 3}–Ga–Al–C. MAX phase-Al{sub 2}O{sub 3} composites were made in all systems except those with A=Ga or In. The effectiveness of conversion to MAX phases was generally in the range 63–96% without optimisation of starting ratios. Optimisation in the Ti–Si–C system gave a MAX phase component with >98% Ti{sub 3}SiC{sub 2}. - Graphical abstract: A range of Ti{sub n+1}AX{sub n} phases with different A elements were synthesised directly from the M oxide via exchange reactions. The process has now been shown to be general in all the systems marked in green in the table. - Highlights: • Ti{sub n+1}AC{sub n} phases were produced via a single step exchange reaction. • 3 MAX phase systems were successful via this method for the first time. • Cr{sub 2}GeC was also able to be produced via an exchange reaction. • The interconversion reaction in MAX phases is more general than previously thought.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, characterization and sorption properties of functionalized Cr-MIL-101-X (X=–F, –Cl, –Br, –CH{sub 3}, –C{sub 6}H{sub 4}, –F{sub 2}, –(CH{sub 3}){sub 2}) materials

Four existing and three new functionalized chromium terephthalates having MIL-101 topology and denoted as Cr-MIL-101-X (existing ones with X=–F, 1-F; –Cl, 2-Cl; –Br, 3-Br; –CH{sub 3}, 4-CH{sub 3}; new ones with X=–C{sub 6}H{sub 4}, 5-C{sub 6}H{sub 4}; –F{sub 2}, 6-F{sub 2}, –(CH{sub 3}){sub 2}, 7-(CH{sub 3}){sub 2}) were synthesized under hydrothermal conditions. All the materials except 5-C{sub 6}H{sub 4} could be prepared by a general synthetic route, in which the mixtures of CrO{sub 3}, H{sub 2}BDC-X (BDC=1,4-benzenedicarboxylate) linkers, conc. HCl and water with a molar ratio of 1:1:3.9:222.2 were reacted at 180 °C for 144 h. Compared to the 144 h of synthesis time, three of the compounds, namely 1-Cl, 2-Br and 5-C{sub 6}H{sub 4}, could be prepared in much shorter reaction times (12–18 h at 180–210 °C). The materials possess high thermal stability up to 270–300 °C in an air atmosphere. The activated compounds exhibit significant porosity (S{sub BET} range: 1273–2135 m{sup 2} g{sup −1}). At 0 °C and 1 bar, the CO{sub 2} adsorption capacities of the compounds fall in the 1.7–2.9 mmol g{sup −1} range. Compounds 1-F and 6-F{sub 2} showed enhanced CO{sub 2} uptake values compared to parent Cr-MIL-101. The benzene adsorption capacities of the compounds lie in the range of 66.2–139.5 molecules per unit cell at 50 °C and p/p{sub 0}=0.35. The increased benzene uptake value of 1-F compared to un-functionalized Cr-MIL-101 and 4-CH{sub 3} suggests that the fluorination has induced more hydrophobicity in Cr-MIL-101 as compared to the methylation. - Graphical abstract: Benzene adsorption by seven functionalized Cr-MIL-101-X metal-organic framework (MOF) materials Display Omitted - Highlights: • Seven functionalized Cr-MIL-101-X materials were synthesized solvothermally. • All Cr-MIL-101-X materials exhibited high thermal stability up to 270–300 °C in air. • All Cr-MIL-101-X compounds displayed considerable porosity towards N{sub 2}, CO{sub 2} and benzene. • Mono- and di-fluorinated Cr-MIL-101 materials showed enhanced CO{sub 2} adsorption capacities. • Cr-MIL-101-F adsorbed more benzene than non- and methyl-functionalized Cr-MIL-101.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cr{sub 2}O{sub 5} as new cathode for rechargeable sodium ion batteries

Chromium oxide, Cr{sub 2}O{sub 5}, was synthesized by pyrolyzing CrO{sub 3} at 350 °C and employed as a new cathode in rechargeable sodium ion batteries. Cr{sub 2}O{sub 5}/Na rechargeable batteries delivered high specific capacities up to 310 mAh/g at a current density of C/16 (or 20 mA/g). High-resolution solid-state {sup 23}Na NMR both qualitatively and quantitatively revealed the reversible intercalation of Na ions into the bulk electrode and participation of Na ions in the formation of the solid-electrolyte interphase largely at low potentials. Amorphization of the electrode structure occurred during the first discharge revealed by both NMR and X-ray diffraction data. CrO{sub 3}-catalyzed electrolyte degradation and loss in electronic conductivity led to gradual capacity fading. The specific capacity stabilized at >120 mAh/g after 50 charge-discharge cycles. Further improvement in electrochemical performance is possible via electrode surface modification, polymer binder incorporation, or designs of new morphologies. - Graphical abstract: Electrochemical profile of a Cr{sub 2}O{sub 5}/Na battery cell and high-resolution solid-state {sup 23}Na MAS NMR spectrum of a Cr{sub 2}O{sub 5} electrode discharged to 2 V. - Highlights: • Cr{sub 2}O{sub 5} was synthesized and used as a new cathode in rechargeable Na ion batteries. • A high capacity of 310 mAh/g and an energy density of 564 Wh/kg were achieved. • High-resolution solid-state {sup 23}Na NMR was employed to follow the reaction mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxidation behaviors of porous Haynes 214 alloy at high temperatures

The oxidation behaviors of porous Haynes 214 alloy at temperatures from 850 to 1000 °C were investigated. The porous alloys before and after the oxidation were examined by optical microscopy, scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS), X-ray diffraction (XRD) analyses, and X-ray photoelectron spectroscopy (XPS). The oxidation kinetics of the porous alloy approximately follows a parabolic rate law and exhibits two stages controlled by different oxidation courses. Complex oxide scales composed of Cr{sub 2}O{sub 3}, NiCr{sub 2}O{sub 4} and Al{sub 2}O{sub 3} are formed on the oxidized porous alloys, and the formation of Cr{sub 2}O{sub 3} on its outer layer is promoted with the oxidation proceeding. The rough surface as well as the micropores in the microstructures of the porous alloy caused by the manufacturing process provides fast diffusion paths for oxygen so as to affect the formation of the oxide layers. Both the maximum pore size and the permeability of the porous alloys decrease with the increase of oxidation temperature and exposure time, which may limit its applications. - Highlights: • Two-stage oxidation kinetics controlled by different oxidation courses is showed. • Oxide scale mainly consists of Cr{sub 2}O{sub 3}, NiCr{sub 2}O{sub 4} and Al{sub 2}O{sub 3}. • Rough surface and micropores lead to the formation of uneven oxide structure. • Content of Cr{sub 2}O{sub 3} in the outer layer of the scale increases with time at 1000 °C. • Maximum pore size and permeability decrease with increasing temperature and time.

36 MATERIALS SCIENCE↗

High temperature oxidation behavior of Ni-based superalloy GH202

The isothermal oxidation kinetic and oxidation behavior of Ni-based superalloy GH202 were investigated at temperatures from 800 °C to 1100 °C. The microstructure of GH202 was characterized by scanning electron microscope (SEM) and electron back-scattered diffraction (EBSD). The composition and morphologies of oxide scales of the surface and cross-section samples were examined by X-ray diffraction (XRD), electron probe microanalysis (EPMA), and SEM combined with energy-dispersive spectroscopy (EDS). The results show that the growth of the oxide scales on GH202 obeyed a parabolic law with an activation energy of 247.8 KJ·mol{sup −1} from 800 °C to 1100 °C. The continuous and dense oxide scales that formed at 800 °C and 900 °C were composed of Cr{sub 2}O{sub 3}, NiCr{sub 2}O{sub 4} and a small amount of TiO{sub 2}. Beneath the oxide scales, aluminum-rich oxides formed along the grain boundaries due to internal oxidation. After treatment at 1000 °C for 150 h, the oxide scale was separated into two layers, the outer layer with sparse holes that was mainly composed of Cr{sub 2}O{sub 3} and TiO{sub 2} and an inner layer of dense Cr{sub 2}O{sub 3}. At 1100 °C for 100 h the outer layer was spalled, due to the looser oxide scale with large blocks of TiO{sub 2} and NiCr{sub 2}O{sub 4} which provided channels for oxygen diffusion. - Highlights: •Isothermal oxidation kinetic of GH202 obeys a parabolic law from 800 °C to 1100 °C. •The activation energy of GH202 is closed to the diffusion activation of Cr{sup 3+}. •The evolution process of oxide scales from 800 °C to 1100 °C is displayed by EPMA. •The oxidation behavior of GH202 is mainly controlled by Cr{sup 3+} and Ti{sup 4+}.

36 MATERIALS SCIENCE↗

Characterization of oxide scales grown on alloy 310S stainless steel after long term exposure to supercritical water at 500 °C

The oxide scale grown of static capsules made of alloy 310S stainless steel was investigated by exposure to the supercritical water at 500 °C 25 MPa for various exposure times up to 20,000 h. Characterization techniques such as X-ray diffraction, scanning/transmission electron microscopy, energy dispersive spectroscopy, and fast Fourier transformation were employed on the oxide scales. The elemental and phase analyses indicated that long term exposure to the SCW resulted in the formation of scales identified as Fe{sub 3}O{sub 4} (outer layer), Fe-Cr spinel (inner layer), Cr{sub 2}O{sub 3} (transition layer) on the substrate, and Ni-enrichment (chrome depleted region) in the alloy 310S. It was found that the layer thickness and weight gain vs. exposure time followed parabolic law. The oxidation mechanism and scales grown on the alloy 310S stainless steel exposed to SCW are discussed. - Highlights: •Oxidation of alloy 310S stainless steel exposed to SCW (500 °C/25 MPa) •The layer thickness and weight gain vs. exposure time followed parabolic law. •Oxide layers including Fe{sub 3}O{sub 4} (outer), Fe-Cr spinel (inner) and Cr{sub 2}O{sub 3} (transition) •Ni element is segregated by the selective oxidation of Cr.

36 MATERIALS SCIENCE↗

High temperature oxidation behavior of a high Al-containing ferritic heat-resistant stainless steel

Highlights: • Oxidation kinetics has been analyzed by discontinuous weighing. • Microstructure and phase composition of oxide films were investigated by SEM, EDS and XRD analysis. • The oxidation resistance of 1000 °C is obviously deteriorated comparing with that at 800 °C and 900 °C. • The oxidation mechanism has been discussed. - Abstract: The high temperature oxidation behavior of a high Al-containing ferritic heat-resistant stainless steel at temperatures of 800, 900, and 1000 °C in air were studied in isothermal oxidation tests. The results showed that the isothermal oxidation kinetic curves obtained at different temperatures followed the parabolic law, and the weight gain per unit at 1000 °C was significantly higher than that at 800 and 900 °C. The oxidation rate at 1000 °C was about three times faster than that at 800 and 900 °C. Continuous and compact multicomponent oxide films mainly composed of Cr{sub 2}O{sub 3}, Al{sub 2}O{sub 3}, spinel MnFe{sub 2}O{sub 4}, and MnCr{sub 2}O{sub 4} were obtained at 800 and 900 °C. The oxide film started delaminating at 1000 °C; the outer layer was composed of Cr{sub 2}O{sub 3}, spinel MnCr{sub 2}O{sub 4}, and MnFe{sub 2}O{sub 4}, the middle layer was composed of Fe{sub 2}O{sub 3} and Fe-Cr matrix, and the inner layer was composed of Al{sub 2}O{sub 3} and SiO{sub 2}. Oxidation resistance at 1000 °C was reduced mainly because of porous Fe{sub 2}O{sub 3} and inner oxidation of Al and Si. In addition, the oxidation mechanism was discussed based on kinetic and morphological observations.

36 MATERIALS SCIENCE↗

Characterization of Alloy 600 joints exposed to a high-temperature supercritical-carbon dioxide environment

Highlights: • Diffusion-bond showed similar corrosion and carburization behavior as parent matrix. • Diffusion-bond line migrated due to the Cr-depletion induced recrystallization. • Alloy 182 fusion-weld showed larger weight gains with outer Mn-rich oxides. • The presence of SiO{sub 2} in chromia suppressed carburization at the oxide/matrix interface. • Despite larger weight gains, Alloy 182 fusion-weld showed negligible tensile property changes. - Abstract: Two types of Alloy 600 joints, such as diffusion-bonded joint and Alloy 182 fusion-weld, were exposed to supercritical-CO{sub 2} environment at 550 and 650 °C (20 MPa) for 1000 h. The diffusion-bond region showed similar oxidation characteristics as parent Alloy 600, but the migration of diffusion bond line below oxide layer was observed due to the Cr-depletion induced recrystallization. For Alloy 182 fusion-weld, outer Mn-rich oxides (Mn{sub 3}O{sub 4} and MnCr{sub 2}O{sub 4}) and a small amount of inner SiO{sub 2} mixed with chromia were formed due to high Mn and Si contents. The presence of SiO{sub 2} in chromia suppressed carburization at the oxide/matrix interface, which resulted in the formation of an amorphous C layer between the outer Mn-rich oxide and inner Cr-rich oxide. For Alloy 182 fusion-weld, tensile property changes after exposure to supercritical-CO{sub 2} environment were negligible.

36 MATERIALS SCIENCE↗

Study of the scale formed on super 304H boiler tube steels after long-term steam oxidation at high temperatures

Highlights: • Steam oxidation tests were performed on the conventional and shot-peened Super304H boiler tube. • A continuous amorphous SiO{sub 2} layer separated the metal from the scale in shot-peened specimen. • The SiO{sub 2} layer enhanced the formation of dense Cr{sub 2}O{sub 3} and FeCr{sub 2}O{sub 4} layers. • The scale on shot-peened specimens is stable upon steam temperature and time increase. Steam oxidation of a Super 304H boiler tube was performed at steam temperatures of 650 °C and 700 °C for time durations up to 5000 h. The oxidation scale outcomes which formed on as-received untreated and shot-peened (SP) tubes were studied using X-ray diffraction (XRD), scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), and transmission electron microscopy (TEM). γ-Grain nanocrystallization on the surface of the SP specimen generated an abundant fraction of grain boundary that guaranteed the formation of a continuous amorphous SiO{sub 2} layer at the metal-scale interface that enhanced the formation of dense Cr{sub 2}O{sub 3} and FeCr{sub 2}O{sub 4} in the scale. Scale breakaway along defects in the outer layer of the scale was accelerated by the steam temperature in the untreated specimens, whereas the scale that formed on the SP specimens appeared to be stable.

36 MATERIALS SCIENCE↗

Effect of La{sub 2}O{sub 3}, CoO, Cr{sub 2}O{sub 3} and MoO{sub 3} nucleating agents on crystallization behavior and magnetic properties of ferromagnetic glass-ceramic in the system Fe{sub 2}O{sub 3}{center_dot}CaO{center_dot}ZnO{center_dot}SiO{sub 2}

Highlights: Black-Right-Pointing-Pointer Crystallization of magnetic glass ceramic with different nucleating agents. Black-Right-Pointing-Pointer The effect of La{sub 2}O{sub 3}, CoO, Cr{sub 2}O{sub 3} and MoO{sub 3} as nucleating agents was studied. Black-Right-Pointing-Pointer XRD for as prepared samples revealed crystallization of pure magnetite. Black-Right-Pointing-Pointer Heat treatment revealed minor calcium silicate, hematite and cristobalite. Black-Right-Pointing-Pointer TEM revealed crystallization of crystallite size in the range 50-100 nm. -- Abstract: Preparation and characterization of ferromagnetic glass ceramic in the system Fe{sub 2}O{sub 3}{center_dot}CaO{center_dot}ZnO{center_dot}SiO{sub 2} with different nucleating agents was studied. The effect of La{sub 2}O{sub 3}, CoO, Cr{sub 2}O{sub 3} and MoO{sub 3} as nucleating agents was investigated. Differential thermal analysis; X-ray diffraction and transmission electron microscope were used to investigate thermal behavior, sequence of crystallization and microstructure of the samples. XRD analysis for as prepared samples revealed the crystallization of single magnetite phase. Heat treatment at 900 Degree-Sign C/2 h revealed the appearance of minor amounts of calcium silicate, hematite and cristobalite beside magnetite. TEM revealed crystallization of crystallite size in the range 50-100 nm. Lattice parameters, cell volume and crystallite size were stimulated from XRD data. Magnetic properties of quenched samples were measured under 20 kG.

36 MATERIALS SCIENCE↗

Effect of reaction temperature on crystallite size and sensing response of chromium oxide nanoparticles

Graphical abstract: Sensing response towards 250 ppm ethanol for the samples synthesized at different reaction temperatures at different operating temperatures. Highlights: ► Effect of reaction temperature on particle size of Cr{sub 2}O{sub 3}. ► No catalyst has been incorporated to enhance the response of the material. ► Synthesis of Cr{sub 2}O{sub 3} nanoparticles. -- Abstract: Nanoparticles of chromium oxide have been synthesized following a precipitation technique at reaction temperatures 5, 27 and 65 °C. Synthesized powders were characterized using X-ray diffraction, transmission electron microscope and Brunauer–Emmett–Teller techniques to carry out structural and morphological analysis. The reaction temperature has been found to be playing a crucial role in controlling particle size. It has been observed that Cr{sub 2}O{sub 3} nanoparticles synthesized at 27 °C were smaller as compared to those synthesized at 5 and 65 °C. Chromium oxide samples thus prepared were deposited as thick films on alumina substrates to act as gas sensors and their sensing response to ethanol vapour was investigated at different operable temperatures. It has been observed that all the sensors exhibited optimum response at 250 °C. The investigations revealed that sensing response of Cr{sub 2}O{sub 3} nanoparticles synthesized at 27 °C was exceptionally higher than that of Cr{sub 2}O{sub 3} nanoparticles synthesized at 5 and 65 °C.

36 MATERIALS SCIENCE↗

Growth and characterization of periodically polarity-inverted ZnO structures on sapphire substrates

We report on the fabrication and characterization of periodically polarity inverted (PPI) ZnO heterostructures on (0 0 0 1) Al{sub 2}O{sub 3} substrates. For the periodically inverted array of ZnO polarity, CrN and Cr{sub 2}O{sub 3} polarity selection buffer layers are used for the Zn- and O-polar ZnO films, respectively. The change of polarity and period in fabricated ZnO structures is evaluated by diffraction patterns and polarity sensitive piezo-response microscopy. Finally, PPI ZnO structures with subnanometer scale period are demonstrated by using holographic lithography and regrowth techniques.

36 MATERIALS SCIENCE↗

Fracture modes in tubular LSFCO ceramic membranes under graded reducing conditions

Highlights: ► Microstructural evolution in LSFCO membranes under graded environment is reported. ► The role of chemically induced stresses and oxygen deficiency is evaluated. ► The stress distribution is modeled by a point defect model. - Abstract: Chromium (III) oxide (Cr{sub 2}O{sub 3})-doped LaSrFeO{sub 3} perovskite, La{sub 0.2}Sr{sub 0.8}Fe{sub 0.8}Cr{sub 0.2}O{sub 3−δ} (LSFCO), is being considered as a potential material for applications in solid oxide fuel cells, gas separation membranes, and electrochemical reactors because of its high electro-catalytic activity. Similar to other perovskites, the performance and mechanical strength of LSFCO materials are significantly affected by environment and temperature. Here, we report a fracture gradient phenomenon in tubular C-ring-shaped LSFCO ceramic membranes under graded reducing conditions. The graded reducing condition was produced by flushing N{sub 2} on the outer side of the C-ring membranes at 1000 °C while keeping the inner side untreated. The rings were then diametrically compressed to fracture, and the resultant fracture morphology was analyzed with a scanning electron microscope (SEM). A fracture gradient with three distinct regions across the thickness of the membranes was identified on the split surfaces. In the outer region of the C-ring specimen exposed to N{sub 2}, a mixed inter/transgranular fracture with a predominant intergranular pattern was observed. In the middle section of the fracture surface, a characteristic transgranular fracture of the perovskite grains was found. At the inner region of the ring, a mixed inter/transgranular fracture with a predominant transgranular pattern occurred. The mechanism of gradient fractures was attributed both to chemically induced stresses caused by oxygen diffusion and to the formation of a separate phase of oxygen-deficient perovskite in the parent perovskite. The stresses generated were modeled by a point defect model. This work provides significant information on microstructure evolutions of tubular LSFCO membranes under graded reducing atmospheres.

36 MATERIALS SCIENCE↗