Search NASA⌕ Search

SEARCH · Search NASA

Results for “DETAILS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

SINGLE-SHELL TANK INTEGRITY PROJECT ANALYSIS OF RECORD-PRELIMINARY MODELING PLAN FOR THERMAL AND OPERATING LOADS

This document is a Phase I deliverable for the Single-Shell Tank Analysis of Record effort. This document is not the Analysis of Record. The intent of this document is to guide the Phase II detailed modeling effort. Preliminary finite element models for each of the tank types were developed and different case studies were performed on one or more of these tank types. Case studies evaluated include thermal loading, waste level variation, the sensitivity of boundary effects (soil radial extent), excavation slope or run to rise ratio, soil stratigraphic (property and layer thickness) variation at different farm locations, and concrete material property variation and their degradation under thermal loads. The preliminary analysis document reviews and preliminary modeling analysis results are reported herein. In addition, this report provides recommendations for the next phase of the SST AOR project, SST detailed modeling. Efforts and results discussed in this report do not include seismic modeling as seismic modeling is covered by a separate report. The combined results of both static and seismic models are required to complete this effort. The SST AOR project supports the US Department of Energy's (DOE) Office of River Protection (ORP) mission for obtaining a better understanding of the structural integrity of Hanford's SSTs. The 149 SSTs, with six different geometries, have experienced a range of operating histories which would require a large number of unique analyses to fully characterize their individual structural integrity. Preliminary modeling evaluations were conducted to determine the number of analyses required for adequate bounding of each of the SST tank types in the Detailed Modeling Phase of the SST AOR Project. The preliminary modeling was conducted in conjunction with the Evaluation Criteria report, Johnson et al. (2010). Reviews of existing documents were conducted at the initial stage of preliminary modeling. These reviews guided the topics that were explored in the SST preliminary modeling. The reviews determined the level of detail necessary to perform the analyses of the SSTs. To guide the Phase II detailed modeling effort, preliminary finite element models for each of the tank types were developed and different case studies were performed on one or more of these tank types. Case studies evaluated include thermal loading, waste level variation, the sensitivity of boundary effects (soil radial extent), excavation slope or run to rise ratio, soil stratigraphic (property and layer thickness) variation at different farm locations, and concrete material property variation and their degradation under thermal loads. Conclusions were derived from case studies on one of the tank types when no additional runs of similar cases on other types of tanks were found necessary to derive those conclusions. The document reviews provided relatively complete temperature histories for Type IV tanks. The temperature history data for Type I, II, and III tanks was almost nonexistent for years prior to 1975. Document reviews indicate that there might be additional useful data in the US Department of Energy, Richland Operations Office (DOE-RL) records in Seattle, WA, and these records need to be reviewed to extract data that might have been disregarded during previous reviews. Thermal stress analyses were conducted using different temperature distribution scenarios on Type IV tanks. Such studies could not be carried out for other tank types due to lack of temperature history data. The results from Type IV tank analyses indicate that factors such as temperature distribution in the tank waste and rate of rise in waste temperature have a significant impact on the thermal stresses in the tank structures. Overall, the conclusion that can drawn from the thermal stress analyses is that these studies should be carried out for all tank types during the detailed analysis phase with temperature values that are reasonably close to the typical temperature histories of the respective tank types. If and/or when additional waste temperature data is acquired for tank Type I, II, and III tanks, additional cases need to be considered as tank structural integrity is sensitive to thermal loads. A few case studies were also performed using Type IV-b models to comprehend the effects of excavation boundaries, change in soil stratigraphy (layer thickness and properties), and radial extent of soil in the finite element models. The result from the case studies indicates that the slight variation in soil stratigraphy has little effects on the tank sections force and moment demands under mechanical loads. The case study for excavation slope or backfill transition boundary indicated that inclusion of such boundary yields conservative demands in the wall region while demands at other locations remain unaffected. Hence this excavation slope will be modeled in the detailed analysis of SSTs.

54 ENVIRONMENTAL SCIENCES↗

(U) The Effect of ENDF/B-VIII.1 on Jezebel

The 239 Pu Jezebel critical assembly of 1954-55 was modeled in great detail and reevaluated using ENDF/B-VII.1 cross sections, and a new simplified (homogeneous one-dimensional spherical) benchmark was derived. The new simplified model was similar to that derived by Hansen and Paxton in 1969, but its radius was modified so that its k eff was the average of the C/E’s (where C is the calculated k eff and E is the inferred experimental k eff ) of the four detailed models. When ENDF/B-VIII.0 data were released, a mismatch between the detailed and simplified models was introduced due to changes in the nickel cross sections, because the detailed models contain nickel but the simplified model does not. A revision of the simplified model realigned the detailed and simplified models. ENDF/B-VIII.1 data have now been released. The simplified and detailed Jezebel models have been run using preliminary ENDF/B-VIII.1 ACE files. In Sec. II, it is shown that the detailed and simplified models are still aligned. No revision of the simplified model is called for. These results were computed using MCNP6.3.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Drilling, Completion, and Data Collection Plans An Assessment of Geological Carbon Sequestration Options in the Illinois Basin: Phase III

Executive Summary The Illinois Basin – Decatur Project (IBDP) is managed by the Midwest Geological Sequestration Consortium (MGSC) and is led by the Illinois State Geological Survey (ISGS) at the University of Illinois. The project site is located on the Archer Daniels Midland Company (ADM) property in Decatur, Illinois, and is a fully integrated carbon capture and storage (CCS) project that uses CO₂ captured from the ethanol-producing fermentation process at the ADM corn-processing plant (Finley et. al., 2013). IBDP has a goal of injecting one million tonnes of CO₂ into the basal sands of the Mt. Simon Sandstone over a three-year period. This is a multifaceted project, and this report details the planning and results of the drilling, completions, well testing, log data acquisition, and the Health, Safety, and Environment (HSE) aspects of the project. Three deep wells were planned for the IBDP: • The injection well: Injection Well #1 (CCS1); • The monitoring well (both in-zone and above seal): Verification Well #1 (VW1); and • The geophone monitoring well: Geophysical Monitoring Well #1 (GM1). The detailed plans for these wells are attached to the appendices of this document. The wells were drilled successfully with little deviation from the original plans. The biggest change from the plan to execution was the need to adjust for larger-than-expected loss of circulation in the Potosi section of the Knox Formation. The completions reports also attached to this document detail the well constructions as they were actually built. Injectivity testing was carried out, and the perforating plans were adjusted based on the results. Additional perforations and acidizing were performed as a result of the injectivity testing. The testing plans are detailed in this report along with the actual testing results. The injectivity testing results were used in the modeling and simulation efforts. Detailed HSE plans were developed and implemented during the planning and execution phases of the project. The implementation included an HSE Bridging Document, which served to unify the HSE policies of the project partners and key subcontractors. The HSE plan and actual HSE results are presented in this document. There were no recordable HSE incidents during the project. A detailed logging program was developed based on project needs. The log data were acquired in accordance with the plan, and both the plan and log results are presented in this report. Log data were heavily utilized by the research staff, modelers, reservoir engineers, and for technical and permitting efforts. 5 Several key lessons were learned during the project: • Safety in operations and execution is paramount and is only achieved through proper planning and behavior control. The certainty of this was reinforced through implementation of this lesson and the resultant flawless HSE performance during the project. • Losses of drilling fluid circulation were larger than anticipated within the Potosi Formation. Circulation was only recovered through cementing the loss zones. • When possible, minimizing complexity in permit requirements and well designs is preferable. • The size of the wells were outside of the standard experience and expertise typical within the basin, and therefore required substantial planning and ramp-up of contractors and partners to meet project objectives. • With multiple stakeholders and research partners, establishing objectives and requirements early and adhering to change request procedures throughout the project are critical to manage competing data and sampling objectives that may be detrimental to overall progress. The well construction and completion operations were successfully executed, with all wells built in a manner that achieved excellent wellbore integrity. Log planning involved a number of stakeholders and technical specialists. Data collection from logging, coring, and testing was excellent. Time and effort spent with the associated contractors and suppliers to develop a well plan beyond normal scope proved highly successful, resulting in a well-construction and completion project that surpassed expectations. The world-class HSE results also demonstrate the commitment of all stakeholders in the project. The details follow in the body of this document

01 COAL, LIGNITE, AND PEAT↗

Primary System Test Facility Review

Idaho National Laboratory (INL) is designing a Dynamic Energy Transport and Integration Laboratory (DETAIL) to demonstrate the operation of an integrated energy system as part of supporting research and development needs for the DOE Office of Nuclear Energy Integrated Energy Systems (IES) Program. DETAIL will demonstrate real-time integration with the electrical grid, renewable energy inputs, thermal and electrical energy storage, and energy delivery to an end user. A Thermal Energy Distribution System (TEDS) is being constructed within the DETAIL facility to demonstrate the operation of integrated energy system heat transfer components, thermal energy storage, distribution systems, and instrumentation and control (I&C), which will allow the facility to emulate the distribution of thermal energy to the generation of electrical power, and/or producing non-electrical commodities (e.g., hydrogen). As is the case for other subsystems within DETAIL, TEDS is designed to operate either independently or as a part of an integrated system to demonstrate the operation of integrated components, develop and validate thermal energy transport models and control systems, and study thermal energy inertia and energy storage. In an effort to completely understand how TEDS will integrate with operational plants, data from tests previously run at existing integral system test facilities (IST) will be used to drive the TEDS heater. Alternatively, a real-time data connection would allow steam conditions at the IST to drive the TEDS heater at the same time as having TEDS conditions provide feedback to the IST in terms of steam demand and/or pressure. This integrated testing approach will assess the ability of TEDS to operate during all plant conditions. Three existing integral system test facilities have been reviewed to determine their suitability for demonstrating TEDS capabilities when integrated within the DETAIL. This report summarizes the capabilities of each IST facility and any challenges that must be overcome to meet the operational needs of TEDS and DETAIL.

25 ENERGY STORAGE↗

A Hybrid dasymetric and machine learning approach to high-resolution residential electricity consumption modeling

As urban areas continue to grow and evolve in a world of increasingenvironmental awareness, the need for detailed information regarding residentialenergy consumption patterns has become increasingly important. Though currentmodeling efforts mark significant progress in the effort to better understand thespatial distribution of energy consumption, the majority of techniques are highlydependent on region-specific data sources and often require building- ordwelling-level details that are not publicly available for many regions in the UnitedStates. Furthermore, many existing methods do not account for errors in input datasources and may not accurately reflect inherent uncertainties in model outputs. Wepropose an alternative and more general hybrid approach to high-resolution residentialelectricity consumption modeling by merging a dasymetric model with acomplementary machine learning algorithm. The method’s flexible data requirementand statistical framework ensure that the model both is applicable to a widerange of regions and considers errors in input data sources.

cities↗

Potential landscape and flux field theory for turbulence and nonequilibrium fluid systems

Highlights: •The notion of nonequilibrium trinity based on detailed balance breaking is proposed. •Nonequilibrium trinity captures the nonequilibrium irreversible nature of turbulence. •Nonequilibrium trinity leads to the potential-flux form of stochastic fluid dynamics. •Energy flux in turbulence energy cascade is connected to nonequilibrium trinity. •The four-fifths law of turbulence is a manifestation of nonequilibrium trinity. -- Abstract: Turbulence is a paradigm for far-from-equilibrium systems without time reversal symmetry. To capture the nonequilibrium irreversible nature of turbulence and investigate its implications, we develop a potential landscape and flux field theory for turbulent flow and more general nonequilibrium fluid systems governed by stochastic Navier–Stokes equations. We find that equilibrium fluid systems with time reversibility are characterized by a detailed balance constraint that quantifies the detailed balance condition. In nonequilibrium fluid systems with nonequilibrium steady states, detailed balance breaking leads directly to a pair of interconnected consequences, namely, the non-Gaussian potential landscape and the irreversible probability flux, forming a ‘nonequilibrium trinity’. The nonequilibrium trinity characterizes the nonequilibrium irreversible essence of fluid systems with intrinsic time irreversibility and is manifested in various aspects of these systems. The nonequilibrium stochastic dynamics of fluid systems including turbulence with detailed balance breaking is shown to be driven by both the non-Gaussian potential landscape gradient and the irreversible probability flux, together with the reversible convective force and the stochastic stirring force. We reveal an underlying connection of the energy flux essential for turbulence energy cascade to the irreversible probability flux and the non-Gaussian potential landscape generated by detailed balance breaking. Using the energy flux as a center of connection, we demonstrate that the four-fifths law in fully developed turbulence is a consequence and reflection of the nonequilibrium trinity. We also show how the nonequilibrium trinity can affect the scaling laws in turbulence.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Fe K-edge X-ray absorption characteristics of La{sub 1-x}Sr{sub x}FeO{sub 3-{delta}} prepared by solid state reaction

Perovskites of the composition La{sub 1-x}Sr{sub x}FeO{sub 3-{delta}} (x = 0.0, 0.1, 0.5, 0.9, 1.0) were prepared by the conventional solid state reaction route. The single phase behaviour was assessed by XRD analysis, the electronic properties were investigated by Fe K-edge X-ray absorption spectroscopy. The work is focused on the valence state of iron and the oxygen vacancies of the perovskites investigated. The XRD measurements revealed that the solid state reaction yields cubic perovskites for x = 1, 0.9, rhombohedral perovskites for x = 0.5, and orthorhombic perovskites for x = 0, 0.1. The X-ray absorption data are discussed in detail with respect to Fe K-edge shift, white-line intensity, pre-edge features, and the EXAFS data. The first peak in the Fourier transform of the Chi x k{sup 3} and Chi x k{sup 2} functions was simulated for a detailed analysis of scattering contributions from the first oxygen shell to evaluate the Fe-O bond length. The substitution of lanthanum by strontium leads to a corresponding increase of the iron valence state and thus to the formation of the Jahn-Teller Fe{sup 4+} ion. This is causing disorder in the first coordination shell and thus an increase of the Debye-Waller factor with increasing x. The Fe-O bond length obtained from XRD and especially from X-ray absorption data are consistent with {delta}-values close to zero.

36 MATERIALS SCIENCE↗

Nuclear Data Sheets for A=266,270,274,278,282,286,290,294,298☆

Spectroscopic information such as production, identification, half-lives, decay modes and possible excited states for experimentally known nuclides of mass numbers 266, 270, 274, 278, 282, 286, 290, 294, and 298 are presented together with the recommended values, superseding information and data in the previous ENSDF and NDS evaluation by 2005Gu33. No nuclides have yet been identified for A=302. In the last 14 years, large amounts of new and definitive data on the superheavy nuclides (SHN) have become available, thus changing almost entirely the landscape of nuclear data in this mass region, as also indicated by a number of recent review articles: 2017Og01, 2016Ho09, 2016Ho06 (for fission barriers), 2015Og05, 2015Og07, 2015Mo25, 2015OgZX, 2013Th02, and 2011Og07. See 2016Ka49 for IUPAC technical discussions for the discovery of Z=117 (Ts), Z=115 (Mc), Z=113 (Nh), 2001Ka70 and 2003Ka71 for Z=110-112, 2011Ba54 for Z≥113, 2009Ba62 for Z=112, and 2016Ka50 for Z=118 (Og). A special issue of Nuclear Physics A444 (2015) is devoted to research on superheavy elements (SHE) with 27 articles. In particular, see article by 2015Ko20 on mass spectrometric searches for superheavy elements in terrestrial matter. See also Proceedings of Nobel Symposium NS160 ‘Chemistry and Physics of Heavy and Superheavy Elements’ published in Eur. Phys. Jour. Web of Conferences 131 (2016), in particular 2016UtZZ, 2016DmZZ and 2016HoZY. See also 2016DuZX for future prospects of discovery of elements beyond Z=118 A=266: {sup 266}Db, {sup 266}Sg, {sup 266}Bh, {sup 266}Hs and {sup 266}Mt are the experimentally identified nuclides with A=266. Identification of {sup 266}Lr from α decay of {sup 270}Db has been proposed by 2014Kh04 from experiments at GSI, but complete details and analyses of all the four decay chains reported in this experiment have not yet been published, and discussion in 2015Og05 review article considering their work from Dubna (2013Og04, 2011Og04) and from GSI (2014Kh04) still concluded that {sup 270}Db decayed dominantly by SF mode, in contrast with dominant α decay mode proposed by 2014Kh04. Experiments carried out at FLNR-JINR-Dubna in collaboration with LLNL and ORNL, GSI-SHIP facility, RIKEN, and LBNL facilities: {sup 266}Db from the α-decay of {sup 282}Nh in two correlated decay chains at Dubna; {sup 266}Sg as α-daughter of {sup 270}Hs in 12 correlated decay chains at Dubna and GSI; {sup 266}Bh in α decay of {sup 278}Nh in three correlated decay chains observed at RIKEN, and also directly with one event in {sup 249}Bk({sup 22}Ne,5n) at LBNL, and with four events in {sup 243}Am({sup 26}Mg,3n) at HIRFL-Lanzhou; {sup 266}Hs as α-daughter of {sup 270}Ds at GSI in two different experiments, six correlated decays in the first, and 25 decay chains in the second experiment, the analysis of which has not been fully reported as yet; and {sup 266}Mt directly in {sup 209}Bi({sup 58}Fe,n) reaction at GSI in two different experiments, observing three events in the first experiment and 12 events in the second, also produced in {sup 208}Pb({sup 59}Co,n) reaction at LBNL, observing five correlated decay chains. See also 2000Ho27 for discussion on {sup 266}Sg and {sup 266}Mt. A=270: {sup 270}Db, {sup 270}Bh, {sup 270}Hs, {sup 270}Mt and {sup 270}Ds are the experimentally identified nuclides with A=270 are presented. Experiments carried out at FLNR-JINR-Dubna in collaboration with LLNL and ORNL, GSI-SHIP facility, and RIKEN: {sup 270}Db from the decay of {sup 294}Ts in six correlated decay chains at Dubna and GSI; {sup 270}Bh as α great-granddaughter of {sup 282}Nh in two correlated decay chains observed at Dubna; {sup 270}Hs directly in {sup 248}Cm({sup 26}Mg,4n) reaction at GSI, and in {sup 226}Ra({sup 48}Ca,4n) reaction at Dubna; {sup 270}Mt as granddaughter of {sup 278}Ts in three correlated decay chains at RIKEN; and {sup 270}Ds directly in {sup 207}Pb({sup 64}Ni,n) at GSI in 33 correlated decay chains. A=274: {sup 274}Bh, {sup 274}Mt and {sup 274}Rg are the experimentally identified nuclides with A=274. Search for {sup 274}Ds in {sup 238}U({sup 40}Ar, 4n),E=5.7 MeV/nucleon reaction and subsequent α decays at GSI (1990Sc11) proved negative. Experiments carried out at FLNR-JINR-Dubna in collaboration with LLNL and ORNL, GSI-SHIP facility, and RIKEN: {sup 274}Bh from the decay of {sup 294}Ts in six correlated decay chains at Dubna and GSI, {sup 274}Mt produced as α daughter of {sup 282}Nh in two correlated decay chains observed at Dubna, and {sup 274}Rg as α daughter of {sup 278}Nh produced in three correlated decay chains at RIKEN. A=278: {sup 278}Mt, {sup 278}Rg and {sup 278}Nh are the experimentally identified nuclides with A=278. A very tentative evidence is provided for {sup 278}Bh and {sup 278}Hs from a chain originally observed and assigned to {sup 289}Fl by 1999Og10, but later reassigned by 2004Og10 to {sup 290}Fl, and further discussed in detail by 2016Ho09, where, based on systematics of α decays and SF half-lives, {sup 290}Fl is proposed to decay via ε mode to {sup 290}Nh, which then decays by an α chain, ending in {sup 278}Bh that decays by SF mode. Experiments carried out at FLNR-JINR-Dubna in collaboration with LLNL and ORNL labs in the USA, GSI-SHIP facility, and RIKEN: {sup 278}Mt from the decay of {sup 294}Ts in six correlated decay chains at Dubna and GSI, {sup 278}Rg produced as α daughter of {sup 282}Nh in two correlated decay chains observed at Dubna, and {sup 278}Nh produced directly in three correlated decay chains at RIKEN. A=282: {sup 282}Rg, {sup 282}Cn and {sup 282}Nh are the experimentally identified nuclides with A=282. A very tentative evidence is provided for {sup 282}Mt and {sup 282}Ds from a chain originally observed and assigned to {sup 289}Fl by 1999Og10, but later reassigned by 2004Og10 to {sup 290}Fl, and further discussed in detail by 2016Ho09, where, based on systematics of α decays and SF half-lives, {sup 290}Fl is proposed to decay via ε mode to {sup 290}Nh, which then decays by an α chain, ending in {sup 278}Bh that decays by SF mode. Experiments carried out at FLNR-Dubna, in collaboration with LLNL and ORNL labs in the USA, and at GSI-SHIP facility confirm the identification of these isotopes, {sup 282}Rg in α decay chain of {sup 294}Ts in six correlated decay chains at Dubna and GSI, {sup 282}Cn produced in four ways at Dubna: independently in one correlated decay chain, as α daughter of {sup 286}Lv in 11 correlated decay chains, as α grand-daughter of {sup 290}Lv in 12 correlated decay chains, as α great-grand daughter of {sup 294}Og in four correlated decay chains, and {sup 282}Nh produced at Dubna directly in two correlated decay chains. A=286: {sup 286}Nh and {sup 286}Fl are the only experimentally identified nuclides with A=286. A very tentative evidence is provided for {sup 286}Rg and {sup 286}Cn from a chain originally observed and assigned to {sup 289}Fl by 1999Og10, but later reassigned by 2004Og10 to {sup 290}Fl, and further discussed in detail by 2016Ho09, where, based on systematics of α decays and SF half-lives, {sup 290}Fl is proposed to decay via ε mode to {sup 290}Nh, which then decays by an α chain, ending in {sup 278}Bh that decays by SF mode. 2017Ka66 in experiments at RIKEN using GARIS separator interpret one correlated decay chain in three different ways, one involving possible production of {sup 294}Lv in {sup 248}Cm({sup 48}Ca,2n),E=261.6 MeV, and α decay to {sup 290}Fl which further decays to {sup 286}Cn. Experiments carried out at FLNR-Dubna, in collaboration with LLNL and ORNL labs in the USA, and at GSI-SHIP facility confirm the identification of these isotopes, {sup 286}Nh as α grand-daughter of {sup 294}Ts in six correlated decay chains, and {sup 286}Fl produced in three ways: independently in 11 correlated decay chains, as α daughter of {sup 290}Lv in 12 correlated decay chains, and as α grand-daughter of {sup 294}Og in four correlated decay chains. A=290: {sup 290}Mc and {sup 290}Lv are the only experimentally identified nuclides with A=290. A tentative evidence is provided for {sup 290}Nh and {sup 290}Fl from a chain originally observed and assigned to {sup 289}Fl by 1999Og10, but later reassigned by 2004Og10 to {sup 290}Fl, and further discussed in detail by 2016Ho09, where, based on systematics of α decays and SF half-lives, {sup 290}Fl is proposed to decay via ε mode to {sup 290}Nh, which then decays by an α chain, ending in {sup 278}Bh that decays by SF mode. 2017Ka66 in experiments at RIKEN using GARIS separator interpret one correlated decay chain in three different ways, one involving possible production of {sup 294}Lv in {sup 248}Cm({sup 48}Ca,2n),E=261.6 MeV, and α decay to {sup 290}Fl. Experiments carried out at FLNR-Dubna, in collaboration with LLNL and ORNL labs in the USA, and at GSI-SHIP facility confirm the identification of these isotopes, {sup 290}Mc as α daughter of {sup 294}Ts in six correlated decay chains, and {sup 290}Lv produced in two ways, independently in 14 correlated decay chains, and as α daughter of {sup 294}Og in four correlated decay chains. A=294: {sup 294}Ts and {sup 294}Og are the only experimentally identified nuclides with A=294. Experiments carried out at FLNR-Dubna, in collaboration with LLNL and ORNL labs in the USA, and at GSI-SHIP facility confirm the identification of these isotopes, with a total of six EVR-α-SF correlated decay chains observed for {sup 294}Ts and four for {sup 294}Og. Tentative identification of {sup 294}Lv is provided by 2017Ka66 from the observation one correlated event using GARIS-RIKEN facility, where this event is interpreted in three possible ways, two interpretations lead to production of {sup 293}Lv and successive odd-A nuclides of {sup 289}Fl, {sup 285}Cn and {sup 281}Ds, whereas the third prediction starts with the production of {sup 294}Lv and successive {sup 290}Fl and {sup 286}Cn nuclides. Search for {sup 294}Rg in natural gold materials (2011De03), and for {sup 294}Ds, {sup 294}Fl and {sup 294}Mc in natural Pt, Pb and Bi samples (2011De21) using accelerator mass spectroscopy (AMS) proved negative, with extremely low upper limits established. Also 1980St05 did not see any evidence for {sup 294}Ds in natural Pt sample using AMS. A=298: Search for {sup 298}120 through fusion-evaporation reaction at Dubna, and for {sup 298}Fl and {sup 298}Mc in natural Pt, Pb and Bi samples using accelerator mass spectroscopy (AMS) proved negative. Tentative assignment of three α-α-α decay chains by 2016Ho09 to {sup 299}120 in {sup 248}Cm({sup 54}Cr,3n){sup 299}120 at GSI was refuted by 2017He11, assigning these correlations to random events, instead. A=302: Fluorescent x rays from Z=120 element were observed by 2012Fr03 from compound nucleus {sup 302}120 produced in {sup 238}U({sup 64}Ni,X),E=6.6 MeV/nucleon at GANIL, and x-ray yields were measured, together with minimum average time deduced from x-ray multiplicity. The compound nucleus could decay by 3n- or 4n-channels to produce {sup 299}120 or {sup 298}120. 2012He05 and 2016Ho09 also produced {sup 302}120 compound nucleus in {sup 248}Cm({sup 54}Cr, xn){sup 302}120{sup *},E=6.035 MeV/nucleon; and {sup 238}U({sup 64}Ni,xn){sup 302}120{sup *},E=5.53 MeV/nucleon reactions using UNILAC at GSI. Three α-α-α correlated decays from {sup 248}Cm({sup 54}Cr,xn){sup 302}120{sup *} reaction were tentatively assigned by 2016Ho09 to {sup 299}120 decay, however, a detailed analysis by 2017He11 refuted this claim, ascribing these events to random sequences. There are no data tables for A=302.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A multi-objective programming model for assessment the GHG emissions in MSW management

Highlights: • The multi-objective multi-period optimization model. • The solution approach for the generation of the Pareto front with mathematical programming. • The very detailed description of the model (decision variables, parameters, equations). • The use of IPCC 2006 guidelines for landfill emissions (first order decay model) in the mathematical programming formulation. - Abstract: In this study a multi-objective mathematical programming model is developed for taking into account GHG emissions for Municipal Solid Waste (MSW) management. Mathematical programming models are often used for structure, design and operational optimization of various systems (energy, supply chain, processes, etc.). The last twenty years they are used all the more often in Municipal Solid Waste (MSW) management in order to provide optimal solutions with the cost objective being the usual driver of the optimization. In our work we consider the GHG emissions as an additional criterion, aiming at a multi-objective approach. The Pareto front (Cost vs. GHG emissions) of the system is generated using an appropriate multi-objective method. This information is essential to the decision maker because he can explore the trade-offs in the Pareto curve and select his most preferred among the Pareto optimal solutions. In the present work a detailed multi-objective, multi-period mathematical programming model is developed in order to describe the waste management problem. Apart from the bi-objective approach, the major innovations of the model are (1) the detailed modeling considering 34 materials and 42 technologies, (2) the detailed calculation of the energy content of the various streams based on the detailed material balances, and (3) the incorporation of the IPCC guidelines for the CH{sub 4} generated in the landfills (first order decay model). The equations of the model are described in full detail. Finally, the whole approach is illustrated with a case study referring to the application of the model in a Greek region.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Deciphering Reaction Mechanisms of Molecular Proton Reduction Catalysts with Cyclic Voltammetry: Kinetic vs Thermodynamic Control

The kinetics and thermodynamics of elementary reaction steps involved in the catalytic reduction of protons to hydrogen define the reaction landscape for catalysis. The mechanisms can differ in the order of the elementary proton transfer, electron transfer, and bond-forming steps and can be further differentiated by the sites at which protons and electrons localize. Access to fully elucidated mechanistic, kinetic, and thermochemical details of molecular catalysts is crucial to facilitate the development of new catalysts that operate with optimal efficiency, selectivity, and durability. The mechanism by which a catalyst operates, as well as the kinetics and thermodynamics associated with the individual steps, can often be accessed through electroanalytical studies. Here, this Account details the application of cyclic voltammetry to interrogate reaction mechanisms and quantify the kinetics and thermodynamics of elementary reaction steps for a series of molecular catalysts that mediate electrochemical proton reduction. I distinguish the limiting scenarios wherein a catalyst operates under kinetic control vs thermodynamic control, with a focus on detecting how cyclic voltammetry features shift with proton source strength and concentration, as well as scan rate. For systems that operate under kinetic control, catalytic currents are observed at, or slightly positive toward, the formal potential for the redox process that triggers catalysis. Under thermodynamic control, catalytic responses shift as a function of the proton source pKa and effective pH of the solution. After drawing this distinction, we introduce the appropriate voltammetry experiments and accompanying analytical expressions for extracting key metrics from the data. To illustrate analytical strategies to quantify elementary reaction steps of catalysts operating under kinetic control, I describe our studies of proton reduction catalysts Co(dmgBF 2 ) 2 (CH 3 CN) 2 (dmgBF 2 = difluoroboryl-dimethylglyoxime) and [Ni(P 2 Ph N 2 Ph ) 2 ] 2+ (P 2 Ph N 2 Ph = 1,5-phenyl-3,7-phenyl-1,5-diaza-3,7-diphosphacyclooctane). Here, peak shift analysis, foot-of-the-wave analysis, and plateau current analysis are applied to data sets wherein voltammetric response are recorded as a function of catalyst concentration, proton source concentration, proton source strength, and scan rate to quantify rate constants for elementary proton transfer and bond-forming steps in a catalytic cycle. Further, the case study of [Ni(P 2 Ph N 2 Ph ) 2 ] 2+ illustrates how complementary spectroscopic methods can bolster the mechanistic assignment. Collectively, these two studies showcase how detailed mechanistic studies inform on rate-limiting elementary steps in catalysis and other key processes underpinning catalysis. Second, I present analytical strategies to interrogate catalysts operating under thermodynamic control, centered on the case study of [Ni II (P 2 Ph N 2 Bn ) 2 ] 2+ (P 2 Ph N 2 Bn = 1,5-dibenzyl-3,7-diphenyl-1,5-diaza-3,7-diphosphacyclooctane). Here, the application of nonaqueous Pourbaix theory to extract thermodynamic information is introduced, and the construction of a coupled Pourbaix diagram is detailed. This study identifies ligand-based protonation as the key process that places catalysis under thermodynamic control and influences the reaction mechanism. Together, the work detailed in this Account showcases the utility of electroanalytical methods to disentangle complex reaction mechanisms and extract key thermochemical and kinetic parameters for elementary steps of catalysis. Through detailed presentation of the key analytical expressions that underpin these analyses, this Account seeks to facilitate the adoption of cyclic voltammetry by the community to fully extract kinetic, thermochemical, and mechanistic information on electrochemical small-molecule activation.

catalysts↗

First-principles binary diffusion coefficients for H, H 2 and four normal alkanes + N 2

Collision integrals related to binary (dilute gas) diffusion are calculated classically for six species colliding with N 2 . The most detailed calculations make no assumptions regarding the complexity of the potential energy surface, and the resulting classical collision integrals are in excellent agreement with previous semiclassical results for H + N 2 and H 2 + N 2 and with recent experimental results for C n H 2n+2 + N 2 , n = 2–4. The detailed classical results are used to test the accuracy of three simplifying assumptions typically made when calculating collision integrals: (1) approximating the intermolecular potential as isotropic, (2) neglecting the internal structure of the colliders (i.e., neglecting inelasticity), and (3) employing unphysical R –12 repulsive interactions. The effect of anisotropy is found to be negligible for H + N 2 and H 2 + N 2 (in agreement with previous quantum mechanical and semiclassical results for systems involving atomic and diatomic species) but is more significant for larger species at low temperatures. For example, the neglect of anisotropy decreases the diffusion coefficient for butane + N 2 by 15% at 300 K. The neglect of inelasticity, in contrast, introduces only very small errors. Approximating the repulsive wall as an unphysical R –12 interaction is a significant source of error at all temperatures for the weakly interacting systems H + N 2 and H 2 + N 2 , with errors as large as 40%. For the normal alkanes in N 2 , which feature stronger interactions, the 12/6 Lennard–Jones approximation is found to be accurate, particularly at temperatures above –700 K where it predicts the full-dimensional result to within 5% (although with somewhat different temperature dependence). Overall, the typical practical approach of assuming isotropic 12/6 Lennard–Jones interactions is confirmed to be suitable for combustion applications except for weakly interacting systems, such as H + N 2 . For these systems, anisotropy and inelasticity can safely be neglected but a more detailed description of the repulsive wall is required for quantitative predictions. Moreover, a straightforward approach for calculating effective isotropic potentials with realistic repulsive walls is described. An analytic expression for the calculated diffusion coefficient for H + N 2 is presented and is estimated to have a 2-sigma error bar of only 0.7%.

74 ATOMIC AND MOLECULAR PHYSICS↗

Vapor shielding models and the energy absorbed by divertor targets during transient events

The erosion of divertor targets caused by high heat fluxes during transients is a serious threat to ITER operation, as it is going to be the main factor determining the divertor lifetime. Under the influence of extreme heat fluxes, the surface temperature of plasma facing components can reach some certain threshold, leading to an onset of intense material evaporation. The latter results in formation of cold dense vapor and secondary plasma cloud. This layer effectively absorbs the energy of the incident plasma flow, turning it into its own kinetic and internal energy and radiating it. This so called vapor shielding is a phenomenon that may help mitigating the erosion during transient events. In particular, the vapor shielding results in saturation of energy (per unit surface area) accumulated by the target during single pulse of heat load at some level E{sub max}. Matching this value is one of the possible tests to verify complicated numerical codes, developed to calculate the erosion rate during abnormal events in tokamaks. The paper presents three very different models of vapor shielding, demonstrating that E{sub max} depends strongly on the heat pulse duration, thermodynamic properties, and evaporation energy of the irradiated target material. While its dependence on the other shielding details such as radiation capabilities of material and dynamics of the vapor cloud is logarithmically weak. The reason for this is a strong (exponential) dependence of the target material evaporation rate, and therefore the “strength” of vapor shield on the target surface temperature. As a result, the influence of the vapor shielding phenomena details, such as radiation transport in the vapor cloud and evaporated material dynamics, on the E{sub max} is virtually completely masked by the strong dependence of the evaporation rate on the target surface temperature. However, the very same details define the amount of evaporated particles, needed to provide an effective shielding to the target, and, therefore, strongly influence resulting erosion rate. Thus, E{sub max} cannot be used for validation of shielding models and codes, aimed at the target material erosion calculations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High fidelity simulation and analysis of liquid jet atomization in a gaseous crossflow at intermediate Weber numbers

Recent advances in numerical methods coupled with the substantial enhancements in computing power and the advent of high performance computing have presented first principle, high fidelity simulation as a viable tool in the prediction and analysis of spray atomization processes. The credibility and potential impact of such simulations, however, has been hampered by the relative absence of detailed validation against experimental evidence. The numerical stability and accuracy challenges arising from the need to simulate the high liquid-gas density ratio across the sharp interfaces encountered in these flows are key reasons for this. In this work we challenge this status quo by presenting a numerical model able to deal with these challenges, employing it in simulations of liquid jet in crossflow atomization and performing extensive validation of its results against a carefully executed experiment with detailed measurements in the atomization region. We then proceed to the detailed analysis of the flow physics. The computational model employs the coupled level set and volume of fluid approach to directly capture the spatiotemporal evolution of the liquid-gas interface and the sharp-interface ghost fluid method to stably handle high liquid-air density ratio. Adaptive mesh refinement and Lagrangian droplet models are shown to be viable options for computational cost reduction. Moreover, high performance computing is leveraged to manage the computational cost. The experiment selected for validation eliminates the impact of inlet liquid and gas turbulence and focuses on the impact of the crossflow aerodynamic forces on the atomization physics. Validation is demonstrated by comparing column surface wavelengths, deformation, breakup locations, column trajectories and droplet sizes, velocities, and mass rates for a range of intermediate Weber numbers. Analysis of the physics is performed in terms of the instability and breakup characteristics and the features of downstream flow recirculation, and vortex shedding. Formation of “Λ” shape windward column waves is observed and explained by the combined upward and lateral surface motion. The existence of Rayleigh-Taylor instability as the primary mechanism for the windward column waves is verified for this case by comparing wavelengths from the simulations to those predicted by linear stability analyses. Physical arguments are employed to postulate that the type of instability manifested may be related to conditions such as the gas Weber number and the inlet turbulence level. The decreased column wavelength with increasing Weber number is found to cause enhanced surface stripping and early depletion of liquid core at higher Weber number. A peculiar “three-streak-two-membrane” liquid structure is identified at the lowest Weber number and explained as the consequence of the symmetric recirculation zones behind the jet column. It is found that the vortical flow downstream of the liquid column resembles a von Karman vortex street and that the coupling between the gas flow and droplet transport is weak for the conditions explored.

42 ENGINEERING↗

Monte Carlo Simulation of Electron Thermalization in Scintillator Materials: Implications for Scintillator Nonproportionality

The lack of reliable quantitative estimates of the length and time scales associated with hot electron thermalization after a gamma-ray induced energy cascade obscures the interplay of various microscopic processes controlling scintillator performance and hampers the search for improved detector materials. We apply a detailed microscopic kinetic Monte Carlo model of the creation and subsequent thermalization of hot electrons produced by gamma irradiation of six important scintillating crystals to determine the spatial extent of the cloud of excitations produced by gamma rays and the time required for the cloud to thermalize with the host lattice. The main ingredients of the model are ensembles of microscopic track structures produced upon gamma excitation (including the energy distribution of the excited carriers), numerical estimates of electron-phonon scattering rates, and a calculated particle dispersion to relate the speed and energy of excited carriers. All these ingredients are based on first-principles density functional theory calculations of the electronic and phonon band structures of the materials. Details of the Monte Carlo model are presented along with results for thermalization time and distance distributions. These results are discussed in light of previous work. It is found that among the studied materials, calculated thermalization distances are positively correlated with measured nonproportionality. In the important class of halide scintillators, the particle dispersion is found to be more influential than the largest phonon energy in determining the thermalization distance.

Phonons, radiation detection, scintillators, thema↗

The Q continuum simulation: Harnessing the power of GPU accelerated supercomputers

Modeling large-scale sky survey observations is a key driver for the continuing development of high-resolution, large-volume, cosmological simulations. We report the first results from the “Q Continuum” cosmological N-body simulation run carried out on the GPU-accelerated supercomputer Titan. The simulation encompasses a volume of (1300 Mpc){sup 3} and evolves more than half a trillion particles, leading to a particle mass resolution of m{sub p}≃1.5⋅10{sup 8} M{sub ⊙}. At this mass resolution, the Q Continuum run is currently the largest cosmology simulation available. It enables the construction of detailed synthetic sky catalogs, encompassing different modeling methodologies, including semi-analytic modeling and sub-halo abundance matching in a large, cosmological volume. Here we describe the simulation and outputs in detail and present first results for a range of cosmological statistics, such as mass power spectra, halo mass functions, and halo mass-concentration relations for different epochs. We also provide details on challenges connected to running a simulation on almost 90% of Titan, one of the fastest supercomputers in the world, including our usage of Titan’s GPU accelerators.

79 ASTRONOMY AND ASTROPHYSICS↗

Atlas of solar hidden photon emission

Hidden photons, gauge bosons of a U(1) symmetry of a hidden sector, can constitute the dark matter of the universe and a smoking gun for large volume compactifications of string theory. In the sub-eV mass range, a possible discovery experiment consists on searching the copious flux of these particles emitted from the Sun in a helioscope setup à la Sikivie. In this paper, we compute in great detail the flux of HPs from the Sun, a necessary ingredient for interpreting such experiments. We provide a detailed exposition of transverse photon-HP oscillations in inhomogenous media, with special focus on resonance oscillations, which play a leading role in many cases. The region of the Sun emitting HPs resonantly is a thin spherical shell for which we justify an averaged-emission formula and which implies a distinctive morphology of the angular distribution of HPs on Earth in many cases. Low mass HPs with energies in the visible and IR have resonances very close to the photosphere where the solar plasma is not fully ionised and requires building a detailed model of solar refraction and absorption. We present results for a broad range of HP masses (from 0–1 keV) and energies (from the IR to the X-ray range), the most complete atlas of solar HP emission to date.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Neutral pion electroproduction in the resonance region at high Q{sup 2}

The process ep{yields}ep{pi}{sup 0} has been measured at Q{sup 2}=6.4 and 7.7 (GeV/c{sup 2}){sup 2} in Jefferson Lab's Hall C. Unpolarized differential cross sections are reported in the virtual photon-proton center-of-mass frame considering the process {gamma}*p{yields}p{pi}{sup 0}. Various details relating to the background subtractions, radiative corrections, and systematic errors are discussed. The usefulness of the data with regard to the measurement of the electromagnetic properties of the well-known {delta}(1232) resonance is covered in detail. Specifically considered are the electromagnetic and scalar-magnetic ratios R{sub EM} and R{sub SM} along with the magnetic transition form factor G{sub M}*. It is found that the rapid falloff of the {delta}(1232) contribution continues into this region of momentum transfer and that other resonances may be making important contributions in this region.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

General features of supersymmetric signals at the ILC: Solving the CERN LHC inverse problem

We present the first detailed, large-scale study of the minimal supersymmetric standard model (MSSM) at the {radical}(s)=500 GeV International Linear Collider (ILC), including full standard model backgrounds and detector simulation. This is the first realistic study of the capabilities of the ILC examining the physics of many distinct points in MSSM parameter space which are not linked to a particular supersymmetry (SUSY) breaking mechanism. Specifically, we investigate 242 points in the MSSM parameter space, which we term models, that correspond to the 162 pairs of models that were found by Arkani-Hamed et al. to give indistinguishable signatures at the LHC. We first determine whether the production of the various SUSY particles is visible above the standard model background for each of these parameter space points, and then make a detailed comparison of their various signatures. Assuming an integrated luminosity of 500 fb{sup -1} with 80% electron beam polarization, we find that only 82 out of 242 models lead to visible signatures of some kind with a significance {>=}5 and that only 57 (63) out of the 162 model pairs are distinguishable at 5 (3){sigma}. Our analysis includes PYTHIA and CompHEP SUSY signal generation, full matrix element SM backgrounds for all 2{yields}2, 2{yields}4 and 2{yields}6 processes, ILC-specific initial state radiation and beamstrahlung generated via WHIZARD/GuineaPig, and employs the fast SiD detector simulation org.lcsim. If SUSY is light, the ILC will do a good job at examining its details.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗