Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction optics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Poster — Thur Eve — 18: Cherenkov Emission By High-Energy Radiation Therapy Beams: A Characterization Study

We investigate Cherenkov emission (CE) by radiotherapy beams via radiation dose-versus-CE correlation analyses, CE detection optimization by means of a spectral shift towards the near-infrared (NIR) window of biological tissue, and comparison of CE to on-board MV imaging. Dose-CE correlation was investigated via simulation and experiment. A Monte Carlo (MC) CE simulator was designed using Geant4. Experimental phantoms include: water; tissue-simulating phantom composed of water, Intralipid®, and beef blood; plastic phantom with solid water insert. The detector system comprises an optical fiber and diffraction-grating spectrometer incorporating a front/back-illuminated CCD. The NIR shift was carried out with CdSe/ZnS quantum dots (QDs), emitting at (650±10) nm. CE and MV images were acquired with a CMOS camera and electronic portal imaging device. MC and experimental studies indicate a strong linear dose-CE correlation (Pearson coefficient > 0.99). CE by an 18-MeV beam was effectively NIR-shifted in water and a tissue-simulating phantom, exhibiting a significant increase at 650 nm for QD depths up to 10 mm. CE images exhibited relative contrast superior to MV images by a factor of 30. Our work supports the potential for application of CE in radiotherapy online imaging for patient setup and treatment verification, since CE is intrinsic to the beam and non-ionizing and QDs can be used to improve CE detectability, potentially yielding image quality superior to MV imaging for the case of low-density-variability, low-optical-attenuation materials (ex: breast/oropharynx). Ongoing work involves microenvironment functionalization of QDs and application of multi-channel spectrometry for simultaneous acquisition of dosimetric and tumor oxygenation signals.

07 ISOTOPE AND RADIATION SOURCES↗

Phase Sensor for Aligning a Segmented Telescope Mirror

A phase sensor has been developed for use in aligning a segmented telescope mirror to within a fraction of a wavelength in piston. (As used here, piston signifies displacement of a mirror segment along the optical axis of the telescope.) Such precise alignment is necessary in order to realize the full benefit of the large aperture achievable through segmentation. This phase sensor is achromatic. It is based on two-wavelength shearing interferometry, and can be modified to utilize an extended or broad-band (e.g., white) light source. The sensor optics include a ruled diffraction grating and an imaging lens. The sensor can measure the piston shift between segments as well as aberrations of the segments. It can measure the surface error of an individual segment, making it possible to compensate for the error with optimal amount(s) of piston and/or tilt. The precise capture range of the sensor depends partly on the telescope design; the largest relative piston shifts measurable by use of this sensor are of the order of 100 m. The accuracy of the sensor also depends partly on the telescope design; in general, the accuracy is sufficient to enable alignment to within approximately half a wavelength. The interferometric image is digitized and processed by a simple algorithm in real time, and the output of the algorithm can be used to maintain alignment in real time, even in the presence of atmospheric turbulence. The sensor is robust. Through calibration, it can be made insensitive to (and, hence, tolerant of) misalignments and aberrations of its own optics, most aberrations of the telescope as a whole (in contradistinction to aberrations of individual segments), and most aberrations introduced by atmospheric turbulence

Stahl, Philip↗

Mid- to Far-Infrared Anisotropic Dielectric Function of HfS 2 and HfSe 2

The far-infrared (far-IR) remains a relatively underexplored region of the electromagnetic spectrum extending roughly from 20 to 100 µm in free-space wavelength. Research within this range has been restricted due to a lack of optical materials that can be optimized to reduce losses and increase sensitivity, as well as by the long free-space wavelengths associated with this spectral region. Here the exceptionally broad Reststrahlen bands of two Hf-based transition metal dichalcogenides (TMDs) that can support surface phonon polaritons (SPhPs) within the mid-infrared (mid-IR) into the terahertz (THz) are reported. In this vein, the IR transmission and reflectance spectra of hafnium disulfide (HfS 2 ) and hafnium diselenide (HfSe 2 ) flakes are measured and their corresponding dielectric functions are extracted. These exceptionally broad Reststrahlen bands (HfS 2 : 165 cm -1 ; HfSe 2 : 95 cm -1 ) dramatically exceed that of the more commonly explored molybdenum- (Mo) and tungsten- (W) based TMDs (≈5–10 cm -1 ), which results from the over sevenfold increase in the Born effective charge of the Hf-containing compounds. Further, this work therefore identifies a class of materials for nanophotonic and sensing applications in the mid- to far-IR, such as deeply sub-diffractional hyperbolic and polaritonic optical antennas, as is predicted via electromagnetic simulations using the extracted dielectric function.

36 MATERIALS SCIENCE↗

Soft Phonon Columns on the Edge of the Brillouin Zone in the Relaxor PbMg1/3Nb2/3O3

We report lattice-dynamical measurements, made using neutron inelastic-scattering methods, of the relaxor perovskite PbMg{sub 1/3}Nb{sub 2/3}O{sub 3} (PMN) at momentum transfers near the edge of the Brillouin zone. Unusual 'columns' of phonon scattering that are localized in momentum, but extended in energy, are seen at both high-symmetry points along the zone edge: Q{sub R}={l_brace}1/2,1/2,1/2{r_brace} and Q{sub M}={l_brace}1/2,1/2,0{r_brace}. These columns soften at {approx}400 K which is similar to the onset temperature of the zone-center diffuse scattering, indicating a competition between ferroelectric and antiferroelectric distortions. We propose a model for the atomic displacements associated with these phonon modes that is based on a combination of structure factors and group theoretical analysis. This analysis suggests that the scattering is not from tilt modes (rotational modes of oxygen octahedra), but from zone-boundary optic modes that are associated with the displacement of Pb{sup 2+} and O{sup 2-} ions. Whereas similar columns of scattering have been reported in metallic and (less commonly) molecular systems, they are unusual in insulating materials, particularly in ferroelectrics; therefore, the physical origin of this inelastic feature in PMN is unknown. We speculate that the underlying disorder contributes to this unique anomaly.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

TH-C-17A-04: Shining Light On the Implementation of Cherenkov Emission in Radiation Therapy

Purpose: We hypothesize that Cherenkov emission (CE) by radiotherapy beams is correlated with radiation dose, CE detection can be maximized by a spectral shift towards the near-infrared (NIR) window of biological tissue, and in certain tissue types (ex. breast/oropharynx), it could prove superior to mega-voltage (MV) imaging. Therefore, we compare CE imaging to onboard MV imaging. Methods: Dose-CE correlation was investigated via simulation and experiment. A Monte Carlo (MC) CE simulator was designed using Geant4. Experimental phantoms include: water; tissuesimulating phantom composed of water, fat emulsion, and beef blood; plastic phantom with solid water insert. The optical spectrometry system consisted of a multi-mode optical fiber and diffraction-grating spectrometer incorporating a front/back-illuminated charge-coupled device (CCD). CdSe/ZnS quantum dots (QDs), emitting at (650±10) nm, were used to achieve NIR shift of the CE signal. CE and MV images were acquired with a complementary metal-oxide-semiconductor (CMOS) camera and an electronic portal imaging device (EPID), respectively. Results: MC and experimental studies indicate a strong linear correlation between radiation dose and CE (Pearson coefficient > 0.99). CE by an 18 MeV beam was effectively shifted towards the NIR in water and in a tissue-simulating phantom, exhibiting a 50% increase at 650 nm for QD depths of ∼3 mm. CE images exhibited relative contrast superior to EPID images by a factor of 30. Conclusion: Our work supports the potential for application of CE in radiotherapy online imaging for patient setup and treatment verification, since CE is intrinsic to the beam and non-ionizing, and QDs can be used to improve CE detectability, yielding image quality superior to MV imaging for the case of low density variability, low optical attenuation materials, such as breast or oropharyngeal cavities. Ongoing work involves microenvironment functionalization of QDs and application of multichannel spectrometry for simultaneous acquisition of dosimetric and tumor oxygenation signals. Funding received from the following organizations: Natural Sciences and Engineering Research Council of Canada, McGill University. YZ acknowledges partial support by the CREATE Medical Physics Research Training Network grant of the Natural Sciences and Engineering Research Council (Grant number: 432290)

07 ISOTOPE AND RADIATION SOURCES↗

Monazite-type SrCr O 4 under compression

We report a high-pressure study of monoclinic monazite-type SrCrO 4 up to 26 GPa. Therein we combined x-ray diffraction, Raman, and optical-absorption measurements with ab initio calculations, to find a pressure-induced structural phase transition of SrCrO 4 near 8-9 GPa. Evidence of a second phase transition was observed at 10-13 GPa. The crystal structures of the high-pressure phases were assigned to the tetragonal scheelite-type and monoclinic AgMnO 4 -type structures. Both transitions produce drastic changes in the electronic band gap and phonon spectrum of SrCrO 4 . We determined the pressure evolution of the band gap for the low- and high-pressure phases as well as the frequencies and pressure dependencies of the Raman-active modes. In all three phases most Raman modes harden under compression, however the presence of low-frequency modes which gradually soften is also detected. In monazite-type SrCrO 4 , the band gap blueshifts under compression, but the transition to the scheelite phase causes an abrupt decrease of the band gap in SrCrO 4 . Calculations showed good agreement with experiments and were used to better understand the experimental results. From x-ray-diffraction studies and calculations we determined the pressure dependence of the unit-cell parameters of the different phases and their ambient-temperature equations of state. The results are compared with the high-pressure behavior of other monazites, in particular PbCrO 4 . A comparison of the high-pressure behavior of the electronic properties of SrCrO 4 (SrWO 4 ) and PbCrO 4 (PbWO 4 ) will also be made. Lastly, the possible occurrence of a third structural phase transition is discussed.

36 MATERIALS SCIENCE↗

Multiscale mechanical behavior and microstructure evolution of extruded magnesium alloy sheets: Experimental and crystal plasticity analysis

Highlights: • Experimental stress-strain responses were reproduced by CPFE simulation based on Voronoi grains on three strain paths. • Textures predicted by simulation were in accordance with the ones measured by EBSD at the strain of 0.085. • Deformation heterogeneity in slip-dominated cases was found more significant than that in twin-favored case. • For slip-dominated cases, both high m′ value and high SFs in adjacent grains are responsible for strain localization. - Abstract: A phenomenological crystal plasticity finite element (CPFE) model based on Voronoi grains was applied to reproduce basic deformation features of a hot-extruded magnesium alloy sheet under various strain paths. Corresponding experimental investigations, including mechanical tests, electron back scattered diffraction (EBSD) measurements and optical observation, were also carried out as either a validation or a supplement of the numerical results. Predicted average stress-strain responses and texture evolution are in good accordance with measured ones. Furthermore, deformation heterogeneity at the mesoscopic and intergranular scale were investigated based on the proposed model. At the mesoscale, the heterogeneity in the slip-dominated cases tends to develop continuously, whereas the heterogeneity is retarded in twin-favored deformation. At the intergranular scale, it is concluded from the slip-dominated case that a high slip-transfer parameter and high Schmid factors (SFs) of principal slip systems in adjacent grains could accommodate higher local strain.

36 MATERIALS SCIENCE↗

Shaping solitons by lattice defects

We demonstrate the existence of shape-preserving self-localized nonlinear modes in a two-dimensional photonic lattice with a flat-topped defect that covers several lattice sites. The balance of diffraction, defocusing nonlinearity, and optical potential induced by lattices with various forms of defects results in novel families of solitons featuring salient properties. We show that the soliton shape can be controlled by varying the shape of lattice defects. The existence domains of fundamental and vortex solitons in the semi-infinite gap expand with the defect amplitude. Vortex solitons in the semi-infinite gap with rectangular intensity distributions will break into dipole solitons when the propagation constant exceeds a critical value. In the semi-infinite and first-finite gaps, we find that lattices with rectangular defects can support stable vortex solitons which exhibit noncanonical phase structure.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effect of NiO spin orientation on the magnetic anisotropy of the Fe film in epitaxially grown Fe/NiO/Ag(001) and Fe/NiO/MgO(001)

Single crystalline Fe/NiO bilayers were epitaxially grown on Ag(001) and on MgO(001), and investigated by Low Energy Electron Diffraction (LEED), Magneto-Optic Kerr Effect (MOKE), and X-ray Magnetic Linear Dichroism (XMLD). We find that while the Fe film has an in-plane magnetization in both Fe/NiO/Ag(001) and Fe/NiO/MgO(001) systems, the NiO spin orientation changes from in-plane direction in Fe/NiO/Ag(001) to out-of-plane direction in Fe/NiO/MgO(001). These two different NiO spin orientations generate remarkable different effects that the NiO induced magnetic anisotropy in the Fe film is much greater in Fe/NiO/Ag(001) than in Fe/NiO/MgO(001). XMLD measurement shows that the much greater magnetic anisotropy in Fe/NiO/Ag(001) is due to a 90{sup o}-coupling between the in-plane NiO spins and the in-plane Fe spins.

36 MATERIALS SCIENCE↗

Solution-based spin-coated tin sulfide thin films for photovoltaic and supercapacitor applications

Highlights: • Tin sulfide (SnS{sub x}) thin films were prepared by solution-based spin coating. • The SnS{sub x} films annealed at 500 °C exhibited a pure SnS phase. • The films exhibited direct band gap of 1.4 eV which is near to solar maximum. • The films with the pure SnS phase exhibited a specific capacitance of 42 F g{sup ―1}. - Abstract: In this study, tin sulfide (SnS{sub x}) thin films were prepared using a solution-based spin-coating method. The annealing temperature was observed to play a dominant role in determining the phase, crystallinity, and morphology of the SnS{sub x} thin films. The results obtained from X-ray diffraction, as well as optical and electrical measurements, revealed that the films annealed at 500 °C exhibit a pure SnS phase, with a carrier concentration and direct band gap of ∼10{sup 12} and 1.4 eV, respectively. To explore the applications of SnS in supercapacitors, electrochemical measurements were performed in a 0.2 M NaOH solution. The results indicated that films with a pure SnS phase have a high specific capacitance of 42 F g{sup ―1} at a current density of 2 A g{sup ―1}. The synthesized SnS thin films demonstrate potential for applications in electrochemical capacitors and solar cells.

14 SOLAR ENERGY↗

The crystal structure, vibrational and luminescence properties of the nanocrystalline KEu(WO{sub 4}){sub 2} and KGd(WO{sub 4}){sub 2}:Eu{sup 3+} obtained by the Pechini method

The luminescent nanocrystalline KEu(WO{sub 4}){sub 2} and KGd{sub 0.98}Eu{sub 0.02}(WO{sub 4}){sub 2} have been prepared by the Pechini method. X-ray diffraction, infrared and Raman spectroscopy as well as optical spectroscopy were used to characterise the obtained materials. The crystal structure of KEu(WO{sub 4}){sub 2} was refined in I2/c space group indicating the isostructurality to KGd(WO{sub 4}){sub 2}. The size of the crystalline grains depended on the annealing temperature, increasing with the increase of the temperature. The average size of crystallites of both crystals formed at 540 deg. C was about 50 nm. Vibrational spectra showed noticeable changes as a function of size due to, among others, phonon confinement effect. Luminescence studies did not reveal significant changes for the nanocrystallites with the lowest grain size in comparison with the bulk material. The differences observed in luminescence spectra in form of slight inhomogeneous broadening of the spectral lines and increase of the hypersensitive I{sub 0-2}/I{sub 0-1} ratio point to very low symmetry of Eu{sup 3+} ions and change of the polarisation of the local vicinities of Eu{sup 3+}. X-ray diffraction, vibrational and optical studies showed that the structure of the synthesised nanocrystalline KEu(WO{sub 4}){sub 2} and KGd(WO{sub 4}){sub 2}:Eu is nearly the same as that found for the bulk material. The size-driven phase transitions were established for both compounds. - Graphical abstract: The luminescent nanocrystalline KEu(WO{sub 4}){sub 2} and KGd{sub 0.98}Eu{sub 0.02}(WO{sub 4}){sub 2} have been prepared by the Pechini method and characterise by using X-ray diffraction, infrared and Raman spectroscopy as well as optical spectroscopy. The crystal structure of KEu(WO{sub 4}){sub 2} was refined in I2/c space group indicating the isostructurality to KGd(WO{sub 4}){sub 2}. The size of the crystalline grains increases with the increase of the annealed temperature. The average size of crystallites of both crystals formed at 540 deg. C was about 50 nm. X-ray diffraction, vibrational and optical studies showed that the structure of the synthesised nanocrystalline KEu(WO{sub 4}){sub 2} and KGd(WO{sub 4}){sub 2}:Eu is nearly the same as that found for the bulk material. The size-driven phase transitions were established for both compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Contrast analysis and stability on the ExAO testbed

High-contrast adaptive optics systems, such as those needed to image extrasolar planets, are known to require excellent wavefront control and diffraction suppression. The Laboratory for Adaptive Optics at UC Santa Cruz is investigating limits to high-contrast imaging in support of the Gemini Planet Imager. Previous contrast measurements were made with a simple single-opening prolate spheroid shaped pupil that produced a limited region of high-contrast, particularly when wavefront errors were corrected with the 1024-actuator Boston Micromachines MEMS deformable mirror currently in use on the testbed. A more sophisticated shaped pupil is now being used that has a much larger region of interest facilitating a better understanding of high-contrast measurements. In particular we examine the effect of heat sources in the testbed on PSF stability. We find that rms image motion scales as 0.02 {lambda}/D per watt when the heat source is near the pupil plane. As a result heat sources of greater than 5 watts should be avoided near pupil planes for GPI. The safest place to introduce heat is near a focal plane. Heat also can effect the standard deviation of the high-contrast region but in the final instrument other sources of error should be more significant.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Compound Meta-Optics for Complete and Loss-Less Field Control

Optical metasurfaces offer a compact platform for manipulation of the amplitude, phase, and polarization state of light. Independent control over these properties, however, is hindered by the symmetric transmission matrix associated with single-layer metasurfaces. Here, we utilize multilayer birefringent meta-optics to realize high-efficiency, independent control over the amplitude, phase, and polarization state of light. In this work, high-efficiency control is enabled by redistributing the wavefront between cascaded metasurfaces, while end-to-end inverse design is used to realize independent complex-valued functions for orthogonal polarization states. Based on this platform, we demonstrate spatial mode division multiplexing, optical mode conversion, and universal vectorial holograms, all with diffraction efficiencies over 80%. This meta-optic platform expands the design space of flat optics and could lead to advances in optical communications, quantum entanglement, and information encryption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Extending geometrical optics: A Lagrangian theory for vector waves

Even when neglecting diffraction effects, the well-known equations of geometrical optics (GO) are not entirely accurate. Traditional GO treats wave rays as classical particles, which are completely described by their coordinates and momenta, but vector-wave rays have another degree of freedom, namely, their polarization. The polarization degree of freedom manifests itself as an effective (classical) “wave spin” that can be assigned to rays and can affect the wave dynamics accordingly. A well-known manifestation of polarization dynamics is mode conversion, which is the linear exchange of quanta between different wave modes and can be interpreted as a rotation of the wave spin. Another, less-known polarization effect is the polarization-driven bending of ray trajectories. Here, this work presents an extension and reformulation of GO as a first-principle Lagrangian theory, whose effective Hamiltonian governs the aforementioned polarization phenomena simultaneously. As an example, the theory is applied to describe the polarization-driven divergence of right-hand and left-hand circularly polarized electromagnetic waves in weakly magnetized plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Multiplex and simultaneous measurement of displacement and temperature using tapered fiber and fiber Bragg grating

A simple method to work out the multiplexing of tapered fiber based sensors is proposed and demonstrated. By cascading a tapered fiber with a fiber Bragg grating (FBG), the sensor head is provided with a wavelength identification, different FBGs provide the sensor heads with different reflective peaks and they can be distinguished in optical spectrum. By compositing several such sensor heads with a multi-channel beam splitter, a star-style topological structure sensor for multipoint sensing is achieved. At the same time, the output intensity at the peak wavelength is sensitive to one external physical parameter applied on the related FBG-cascaded tapered fiber and the central wavelength of the peak is only sensitive to temperature, so that that parameter and temperature can be measured simultaneously. A sensor for dual-point measurement of the displacement and temperature simultaneously is experimentally demonstrated by using a 2 x 2 coupler in this paper. Experiment results show that the sensor works well and the largest sensitivities reach to 0.11 dB/{mu}m for displacement in the range of 0-400 {mu}m, and {approx}0.0097 nm/ deg. C for temperature between 20 deg. C and 70 deg. C.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Structure alterations in microporous (Mg,Fe){sub 2}Al{sub 4}Si{sub 5}O{sub 18} crystals induced by energetic heavy-ion irradiation

The microporous framework structure of (Mg{sub 1-x}Fe{sub x}){sub 2}Al{sub 4}Si{sub 5}O{sub 18} (=cordierite) has been subject to a comparative study on the effect of structural alterations originating from exposure to high-energy heavy ions. Oriented samples (with x=0.061, 0.122, and 0.170) were irradiated with swift {sup 124}Xe, {sup 197}Au and {sup 96}Ru ions with 11.1 MeV per nucleon energy and fluences of 1x10{sup 12} and 1x10{sup 13} ions/cm{sup 2}. Irradiated and non-irradiated samples were investigated by means of X-ray diffraction, Moessbauer spectroscopy and optical absorption spectroscopy. Structural investigations reveal an essentially unchanged Al,Si ordering, which appears to be unaffected by irradiation. The most remarkable macroscopic change is the ion-beam induced colouration, which could be assigned to electronic charge transfer transitions involving the Fe cations. Moessbauer spectra indicate an increased amount of {sup [4]}Fe{sup 3+} for the irradiated sample. The most noticeable structural alteration concerns irradiation-induced dehydration of extra-framework H{sub 2}O, which is accompanied by a reduction in the molar volume by {approx}0.2 vol%. - Graphical abstract: Cordierite single-crystal specimen showing the color change from pale blue (unirradiated) to a yellowish brown layer (irradiated) after exposure to relativistic {sup 124}Xe ions at a fluence of 1x10{sup 12} ions per cm{sup 2}.

36 MATERIALS SCIENCE↗

Lanthanum and neodymium solubility in simplified SiO{sub 2}-B{sub 2}O{sub 3}-Na{sub 2}O-Al{sub 2}O{sub 3}-CaO high level waste glass

Lanthanum and neodymium incorporation in simplified high level waste glasses has been investigated for SiO{sub 2}B{sub 2}O{sub 3}Na{sub 2}OAl{sub 2}O{sub 3}CaO compositions quenched from 1200 degrees C, for varying La /(La + Nd) (atomic) and increasing rare-earth oxides contents. In this system and beyond the solubility limit, rare-earths (RE) elements are reported to form apatite phases with the general formula Ca{sub 2}RE{sub 8}(SiO{sub 4}){sub 6}O{sub 2}. In the current study, speciation of these trivalent RE{sup 3+} cations in both amorphous network and crystal phases was determined from X-ray diffraction, scanning electron microscopy, optical absorption at 10 K, Raman spectroscopy, and electron probe microanalysis. It appeared that RE{sub 2}O{sub 3} solubility was higher for La -rich formulations than for Nd -rich ones and that an increase in the RE oxide content reduces the connectivity of the network building units through formation of non-bridging oxygens at the expense of the oxygen bridges. This depolymerization of the glass network did not affect neodymium environment which consisted in silicate tetrahedra. The composition of the apatite crystals was found to be affected by the La /(La + Nd) of the parent glass and deviation from the ideal composition (Ca{sub 2}RE{sub 8}(SiO{sub 4}){sub 6}O{sub 2}) occurred in the neodymium end of the system. It thus appears that both RE{sub 2}O{sub 3} solubility and crystal composition are strongly dependent on the type and crystal chemistry of the RE elements. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗