Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Enhanced magnetoelectric sensitivity in Co{sub 0.7}Zn{sub 0.3}Fe{sub 2}O{sub 4}–Bi{sub 0.9}La{sub 0.1}FeO{sub 3} nanocomposites

Graphical abstract: Polycrystalline nanocomposites of xCo{sub 0.7}Zn{sub 0.3}Fe{sub 2}O{sub 4}–(1 − x)Bi{sub 0.9}La{sub 0.1}FeO{sub 3} (x = 0.1, 0.2, 0.3 and 0.4) were prepared by sol–gel method with average crystallite size in the range 70–80 nm as confirmed by AFM image. Magnetization (M) and magnetocapacitance (MC) were found to be enhanced for the nanocomposite. Highlights: ► Co{sub 0.7}Zn{sub 0.3}Fe{sub 2}O{sub 4}–Bi{sub 0.9}La{sub 0.1}FeO{sub 3} nanocomposites (grain size ∼ 90 nm) prepared by sol–gel method. ► Magnetization (M) was found 4.5% more than 0.4CoFe{sub 2}O{sub 4}–0.6BiFeO{sub 3} composite. ► Magnetocapacitance (MC) is observed higher compared to Ba doped BiFeO{sub 3}. ► The value of α{sub E} was found to be 10% more than some reported. - Abstract: We report the magnetoelectric, dielectric and magnetic properties of xCo{sub 0.7}Zn{sub 0.3}Fe{sub 2}O{sub 4}–(1 − x)Bi{sub 0.9}La{sub 0.1}FeO{sub 3} (x = 0.1, 0.2, 0.3 and 0.4) nanocomposites prepared by sol–gel method. The X-ray diffraction patterns of sintered pellets show the formation of composite phases. The average crystallite size obtain by Williamson–Hall plot for different nanocomposites were found to be in the range 70–80 nm, which are in agreement with particle size calculated from atomic force microscopy. Magnetoelectric voltage coefficient (α{sub E} = 315 mV/cm Oe) and the magnetocapacitance (MC = 3.1%) for x = 0.3 were found to be higher than other synthesized nanocomposites.

36 MATERIALS SCIENCE↗

Impact of Pb content on the physical parameters of Se-Te-Pb system

In the present study, we have investigated the impact of Pb content on the physical parameters in Se-Te-Pb system via average coordination number, constraints, the fraction of floppy modes, cross-linking density, lone pairs electrons, heat of atomization, mean bond energy, cohesive energy and electronegativity. The bulk samples have been prepared by using melt quenching technique. X-ray diffraction pattern of various samples indicates the amorphous nature of investigated glassy alloys. It is observed that average coordination number, average number of constraints and cross-linking density increase with Pb content. However, lone-pair electrons, floppy modes, average heat of atomization, cohesive energy and mean bond energy are found to decrease with Pb atomic percentage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The isolated anatase for dye sensitized solar cell

The isolation of crystallite anatase from commercial TiO{sub 2} P25 Degussa was investigated. The aim of this research was to study of isolated anatase based DSSC as an effort to develop industrial DSSC. The crystal phase, crystallite size and crystal shape both of original P25 and isolated anatase were characterized by XRD and TEM. By observing DSSC parameters such as FF, Jsc and Voc resulted in cell test, the efficiency of samples based DSSC was known. The isolation of anatase crystal was done by dissolving P25 in ammonia catalyzed hydrogen peroxide solution for 15 hours followed by washing and drying. DSSC cell performance was evaluated by applying the isolated anantase and original P25 as photoanode in the Gratzel cell system. The observation of cell efficiency was measured under 100 mW /cm{sup 2} with active area 1.5 cm{sup 2}. X-ray diffraction pattern showed obviously that no rutile contaminant in produced isolated anatase. TEM image shows typical anatase crystal with the particle size 21 nm. Surface area measurement exhibits that surface area of isolated anatase was 64.7m{sup 2}/g. I-V measurement showed that the efficiency of anatase based cell and P25 based cell is 0.79% and 0.51% respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Equation of State and High Pressure Irreversible Amorphization in Y[subscript 3] Fe[subscript 5]O[subscript 12]

The change of crystal structure in yttrium iron garnet Y{sub 3}Fe{sub 5}O{sub 12} was studied at room temperature at high pressures up to {approx}55 GPa by the x-ray diffraction technique in diamond anvil cells. At a pressure of about {approx}50 GPa, a drastic change in the x-ray diffraction pattern was observed indicating the transition into an amorphouslike state. When the pressure was increased, the bulk modulus of YIG was found to be 193 {+-} 4 GPa. It was also found that the amorphous state was retained after decompression down to ambient pressure. From the shape of x-ray patterns in the 'amorphous' phase, it was concluded that the local atomic structure consists of iron-oxygen FeO{sub 6} octahedral complexes with disordered orientations of local axis and of randomly arranged others ion fragments with the overall Y{sub 3}Fe{sub 5}O{sub 12} composition. For the amorphous phase, it was evaluated that the bulk modulus of FeO{sub 6} octahedral complexes is about 260 GPa.

36 MATERIALS SCIENCE↗

Low-temperature structural phase transition in synthetic libethenite Cu{sub 2}PO{sub 4}OH

Low-temperature structural properties of the synthetic mineral libethenite Cu{sub 2}PO{sub 4}OH were investigated by single-crystal X-ray diffraction, synchrotron X-ray powder diffraction, specific heat measurements, and Raman spectroscopy. A second-order structural phase transition from the Pnnm symmetry (a=8.0553(8) A, b=8.3750(9) A, c=5.8818(6) A at 180 K) to the P2{sub 1}/n symmetry (a=8.0545(8) A, b=8.3622(9) A, c=5.8755(6) A, {beta}=90.0012(15) at 120 K) was found at 160 K during cooling. At 120 K, the monoclinic angle is 90.0012(15) from single crystal X-ray data vs 90.083(1) from powder X-ray diffraction data. The P2{sub 1}/n-to-Pnnm transition may be a general feature of the adamite-type compounds, M{sub 2}XO{sub 4}OH. - Graphical Abstract: Fragments of experimental synchrotron X-ray powder diffraction patterns of Cu{sub 2}PO{sub 4}OH between 100 and 280 K. Arrows show additional reflections that appear below 160 K in the monoclinic P2{sub 1}/n phase. Highlights: > A low-temperature phase transition was found in the mineral libethenite Cu{sub 2}PO{sub 4}OH. > No magnetic anomalies and weak specific heat anomalies are detected. > Phase transition is of the second order. > Libethenite may exemplify a general feature of the adamite-type compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced electrical transport in ionic liquid dispersed TMAI-PEO solid polymer electrolyte

A polymer composite is prepared by dispersing ionic liquid [Bmim][BF{sub 4}] in Polyethylene oxide-tetra methyl ammonium iodide composite and subsequent microwave treatment. X-ray diffraction patterns confirm the composite nature. To explore possibility of proton conductivity in these films, electrical transport is studied by impedance spectroscopy and DC polarization. It is revealed that addition of ionic liquid in host TMAI-PEO solid polymer electrolyte enhances the conductivity by ∼ 2 orders of magnitude. Polarization measurements suggest that composites are essentially ion conducting in nature. The maximum ionic conductivity is found to be ∼2 × 10{sup −5} for 10 wt % ionic liquid.

36 MATERIALS SCIENCE↗

Electronic band structure and magnetism of CoFeV 0.5 Mn 0.5 Si

Half-metallic Heusler alloys have attracted significant attention due to their potential application in spin-transport-based devices. We have synthesized one such alloy, CoFeV 0.5 Mn 0.5 Si, using arc melting and high-vacuum annealing at 600 °C for 24 hours. First principles calculation indicates that CoFeV 0.5 Mn 0.5 Si shows a nearly half-metallic band structure with a degree of spin polarization of about 93%. In addition, this value can be enhanced by the application of tensile strain. The room temperature x-ray diffraction patterns are indexed with the cubic crystal structure without secondary phases. The annealed sample shows ferromagnetic order with the Curie temperature well above room temperature ( T c = 657 K) and a saturation magnetization of about 92 emu/g. Our results indicate that CoFeV 0.5 Mn 0.5 Si has a potential for room temperature spin-transport-based devices.

36 MATERIALS SCIENCE↗

Imaging Polarity in Two Dimensional Materials by Breaking Friedel's Law

Friedel's law guarantees an inversion-symmetric diffraction pattern for thin, light materials where a kinematic approximation or a single-scattering model holds. Typically, breaking Friedel symmetry is ascribed to multiple scattering events within thick, non-centrosymmetric crystals. However, two-dimensional (2D) materials such as a single monolayer of MoS 2 can also violate Friedel's law, with unexpected contrast between conjugate Bragg peaks. Here, we show analytically that retaining higher order terms in the power series expansion of the scattered wavefunction can describe the anomalous contrast between hkl and $\bar{hkl}$ peaks that occurs in 2D crystals with broken in-plane inversion symmetry. These higher-order terms describe multiple scattering paths starting from the same atom in an atomically thin material. Furthermore, 2D materials containing heavy elements, such as WS 2 , always act as strong phase objects, violating Friedel's law no matter how high the energy of the incident electron beam. Experimentally, this understanding can enhance diffraction-based techniques to provide rapid imaging of polarity, twin domains, in-plane rotations, or other polar textures in 2D materials.

2D materials↗

Investigation of easy axis orientation of Nd-Fe-B melt-spun ribbons produced by hot rolling and influence of Ti-C addition

The c-axis orientation of Nd-Fe-B melt-spun ribbons caused by hot rolling and the influence of Ti-C addition were investigated. A small roll was placed on a steel wheel near a quartz tube in such a manner that the melt-spun ribbons were hot rolled immediately after quenching. X-ray diffraction patterns measured on both surfaces of the Nd-Fe-B-Ti ribbon indicate that the c-axis is oriented normal to the ribbon plane. The domain pattern of the Nd-Fe-B-Ti-C ribbon was observed with a Kerr microscope. Most of the grains exhibit a maze domain configuration, indicating that the c-axis is oriented normal to the ribbon plane. Furthermore, it was demonstrated that hot rolling and the addition of Ti-C promote c-axis orientation and high coercivity of Nd-Fe-B melt-spun ribbons.

36 MATERIALS SCIENCE↗

Experimental strategies for imaging bioparticles with femtosecond hard X-ray pulses

This study explores the capabilities of the Coherent X-ray Imaging Instrument at the Linac Coherent Light Source to image small biological samples. The weak signal from small samples puts a significant demand on the experiment. Aerosolized Omono River virus particles of ~40 nm in diameter were injected into the submicrometre X-ray focus at a reduced pressure. Diffraction patterns were recorded on two area detectors. The statistical nature of the measurements from many individual particles provided information about the intensity profile of the X-ray beam, phase variations in the wavefront and the size distribution of the injected particles. The results point to a wider than expected size distribution (from ~35 to ~300 nm in diameter). This is likely to be owing to nonvolatile contaminants from larger droplets during aerosolization and droplet evaporation. The results suggest that the concentration of nonvolatile contaminants and the ratio between the volumes of the initial droplet and the sample particles is critical in such studies. The maximum beam intensity in the focus was found to be 1.9 × 10 12 photons per µm 2 per pulse. The full-width of the focus at half-maximum was estimated to be 500 nm (assuming 20% beamline transmission), and this width is larger than expected. Under these conditions, the diffraction signal from a sample-sized particle remained above the average background to a resolution of 4.25 nm. Finally, the results suggest that reducing the size of the initial droplets during aerosolization is necessary to bring small particles into the scope of detailed structural studies with X-ray lasers.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Structural, Electronic, Optical, and Magnetic Properties of Fe{sub 3}Al Alloys

We have investigated the structural, optical, and magnetic properties of D0{sub 3} Fe{sub 3}Al alloys along with the electronic structure calculations. X-ray diffraction patterns confirm the single-phase cubic structure with a symmetry for the arc-melted samples. In the field dependence of magnetic data, ferromagnetic behavior is witnessed down to 2 K from room temperature. The electronic structure calculation corroborates the experimental observation of ferromagnetism in this alloy. Further, optical conductivity data in excellent agreement with the electronic structure calculations confirmed that electronic transitions are predominant by the 3d states of Fe.

36 MATERIALS SCIENCE↗

EFFECTS of DUAL DOPING OF C AND TiC NANOPARTICLES ON SUPERCONDUCTING PROPERTIES OF Fe-SHEATHED MgB{sub 2} TAPES

Fe-sheathed MgB{sub 2} wires doped with C and TiC nanoparticles in the formula MgB{sub 2-x}C{sub x}+yTiC(x = 0, 0.05, 0.1, 0.15, 0.2, and y = 0, 2.5 wt.%, 5 wt.%) were investigated. X-ray diffraction patterns indicate that the core materials in the wires contain small amount of Fe{sub 2}B and MgO impurity phases, and the peaks shift with the variation of doping amount. It is found that the critical temperature T{sub c} decreases with the increase of doping amount. Strong in-field current carrying capability enhancement was observed on MgB{sub 1.95}C{sub 0.05}+2.5 wt.% TiC.

36 MATERIALS SCIENCE↗

Effect of post-deposition treatment on energy conversion efficiency of nanostructured CdS/Cu{sub 2}S thin films

In the present manuscript we report about synthesis of nanostructured CdS/Cu{sub 2}S thin films by economically viable soft chemical route and effect of post deposition treatments such as annealing in air and swift heavy ion irradiation on solar energy conversion efficiency of the heterojunction device. These as grown, annealed and irradiated thin films are characterized for structural, morphological, optical and I-V properties. X-ray diffraction pattern (XRD) represents structural as well as crystallite modifications, atomic force microscopy (AFM) shows improvement in surface appearance of the materials. The solar energy conversion efficiency calculated from I-V exhibited increase in conversion efficiency i. e. 0.09, 0.24 and 0.48 % for as grown, annealed and SHI irradiated thin films.

36 MATERIALS SCIENCE↗

Thermal neutron diffraction determination of the magnetic structure of EuCu{sub 2}Ge{sub 2}

The magnetic structure of EuCu{sub 2}Ge{sub 2} has been determined by flat-plate neutron powder diffraction. Two magnetic phases are present in the neutron diffraction pattern at 3.5 K. They have the same moment, within error, and a common transition temperature. Both {sup 151}Eu and {sup 153}Eu Mössbauer spectroscopy show that the two magnetic phases belong to the same crystallographic phase. Both phases can be modelled by planar helimagnetic structures: one with a propagation vector of [0.654(1), 0, 0], the other with a propagation vector of [0.410(1), 0.225(1), 0].

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Imaging conical intersection dynamics during azobenzene photoisomerization by ultrafast X-ray diffraction

Significance Vibronic coherences are unique features that emerge in the decisive moments of photochemistry and photophysics. Here we demonstrate how X-ray diffraction can access fundamental information about these coherences. This is enabled by recent developments at free-electron lasers, working toward temporal resolution and single-molecule accessibility of scattering-based measurements. Time-resolved diffraction patterns of the isomerization of azobenzene are simulated. The process is monitored in time via the momentum-space signal, with a special focus on the mixed elastic/inelastic scattering from coherences. We give practical ideas on how this relatively weak contribution to the signal can potentially be retrieved. A direct connection to the real-space movie of the conical intersection dynamics is made, enabling the observation of quantum coherences that direct chemical processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultra short-time dynamics of radiation damage in fcc metals

We have performed molecular-dynamics simulations of displacement cascades in copper in order to investigate the nonequilibrium ultra-short-time damage and to evaluate the possibility of observing it experimentally in situ (e.g., in a pump/probe laser experiment). The atomic trajectories have been analyzed by calculating their x-ray diffraction patterns as a function of time. The results show that an integrated x-ray intensity can indeed be used to evidence the irradiation effects. Even though the number of Frenkel defects is large, the main effect of the irradiation showing up in the x-ray intensities at ultrashort times is an important alteration of the lattice vibrations. On the basis of these results, a pump/probe setup is proposed.

36 MATERIALS SCIENCE↗

Influence of the samarium impurity on the structure and surface morphology of Se{sub 95}Te{sub 5} chalcogenide glassy semiconductor

X-ray diffraction and atomic-force microscopy are used to study the structure and surface morphology of Se{sub 95}Te{sub 5} chalcogenide glassy semiconductor films and the influence exerted on these films by doping with samarium. The parameters of the first sharp diffraction peak (FSDP), observed in X-ray diffraction patterns, are used to determine the numerical values of the local structure parameters, such as the “quasiperiod” of density fluctuations, correlation length [size of medium-range-order (MRO) regions], and nanovoid diameters. In addition, the numerical values of the roughness-amplitude parameters are determined. It is found that the disorder in the atomic structure and the irregularities on the surface of the films under study become more pronounced with increasing percentage content of the samarium impurity.

36 MATERIALS SCIENCE↗