Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Rapid synthesis of ordered hexagonal mesoporous silica and their incorporation with Ag nanoparticles by solution plasma

Graphical abstract: Overall reactions of mesoporous silica and AgNPs-incorporated mesoporous silica syntheses by solution plasma process (SPP). Highlights: ► SPP for rapid synthesis of mesoporous silica. ► SPP for rapid synthesis of mesoporous silica and AgNPs incorporation. ► Higher surface area and larger pore diameter of mesoporous silica synthesized by SPP. -- Abstract: Rapid synthesis of silica with ordered hexagonal mesopore arrangement was obtained using solution plasma process (SPP) by discharging the mixture of P123 triblock copolymer/TEOS in acid solution. SPP, moreover, was utilized for Ag nanoparticles (AgNPs) incorporation in silica framework as one-batch process using silver nitrate (AgNO{sub 3}) solution as precursor. The turbid silicate gel was clearly observed after discharge for 1 min and the white precipitate formed at 3 min. The mesopore with hexagonal arrangement and AgNPs were observed in mesoporous silica. Two regions of X-ray diffraction patterns (2θ < 2° and 2θ = 35–90°) corresponded to the mesoporous silica and Ag nanocrystal characteristics. Comparing with mesoporous silica prepared by a conventional sol–gel route, surface area and pore diameter of mesoporous silica prepared by solution plasma were observed to be larger. In addition, the increase in Ag loading resulted in the decrease in surface area with insignificant variation in the pore diameter of mesoporous silica. SPP could be successfully utilized not only to enhance gelation time but also to increase surface area and pore diameter of mesoporous silica.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Ti substitution on structural and magnetic properties of Zn–Mn ferrospinels

Highlights: ► Novel system ZnMn{sub 1−x}Ti{sub x}FeO{sub 4} synthesized by sol–gel route. ► Nanocrystalline materials. ► Magnetic materials. - Abstract: Nanocrystalline ZnMn{sub 1−x}Ti{sub x}FeO{sub 4} (1.0 ≥ x ≥ 0) ferrites were prepared by sol–gel route. Formation of single phase cubic spinel structure for all the compositions was confirmed from their X-ray diffraction patterns. The lattice parameter shows an increasing trend with the increase in Ti content. These ferrite samples existed as crystalline nanoparticles of about 30–40 nm size as observed from transmission electron microscopy (TEM) technique. EDAX analysis indicated that the concentration of different elements in different compositions is in close agreement with the starting concentrations. Infrared spectra showed two main absorption bands in the range 400–800 cm{sup −1} arising due to tetrahedral (A) and octahedral (B) stretching vibrations. The magnetic studies indicated that, the ferrimagnetic behavior increases with titanium substitution.

36 MATERIALS SCIENCE↗

Coherence Properties of Individual Femtosecond Pulses of an X-ray Free-Electron Laser

Measurements of the spatial and temporal coherence of single, femtosecond x-ray pulses generated by the first hard x-ray free-electron laser, the Linac Coherent Light Source, are presented. Single-shot measurements were performed at 780 eV x-ray photon energy using apertures containing double pinholes in 'diffract-and-destroy' mode. We determined a coherence length of 17 {micro}m in the vertical direction, which is approximately the size of the focused Linac Coherent Light Source beam in the same direction. The analysis of the diffraction patterns produced by the pinholes with the largest separation yields an estimate of the temporal coherence time of 0.55 fs. We find that the total degree of transverse coherence is 56% and that the x-ray pulses are adequately described by two transverse coherent modes in each direction. This leads us to the conclusion that 78% of the total power is contained in the dominant mode.

43 PARTICLE ACCELERATORS↗

Microstructural evolution of nanostructured Ti{sub 0.7}Ni{sub 0.3}N prepared by reactive ball-milling

Graphical abstract: - Highlights: • α-Ti to β-Ti phase conversion is observed during 1 h of milling. • Ti{sub 0.7}Ni{sub 0.3}N (fcc) phase is noticed to form after 1 h of milling. • Formation time of Ti(Ni,N) phase is same as TiN phase. • Both X-ray and HRTEM microstructure characterization revealed similar results. - Abstract: Nanocrystalline stoichiometric Ti{sub 0.7}Ni{sub 0.3}N powder has been synthesized by ball-milling the α-Ti (hcp) and Ni (fcc) powders under N{sub 2} gas at room temperature. The α-Ti phase partially transforms to the transient (-Ti phase after 1 h of milling. After 5.5 h of milling, very broad reflections of Ti{sub 0.7}Ni{sub 0.3}N phase is noticed. Complete formation of Ti{sub 0.7}Ni{sub 0.3}N phase is observed after 9 h of milling. Microstructure in terms of lattice imperfections of unmilled and all ball-milled powder mixtures are primarily characterized by analyzing the X-ray powder diffraction patterns employing the Rietveld structure refinement procedure. It clearly reveals the presence of Ti{sub 0.7}Ni{sub 0.3}N phase and inclusion of nitrogen atoms into the α-Ti–Ni matrix on the way to formation of nitride phase. Microstructure of the ball milled nitride powders is also characterized by HRTEM. Particle size of Ti{sub 0.7}Ni{sub 0.3}N phase obtained from XRD method of characterization is ∼5 nm which is very close to that obtained from HRTEM.

36 MATERIALS SCIENCE↗

First-principles predicted low-energy structures of NaSc(BH{sub 4}){sub 4}

According to previous interpretations of experimental data, sodium-scandium double-cation borohydride NaSc(BH{sub 4}){sub 4} crystallizes in the crystallographic space group Cmcm where each sodium (scandium) atom is surrounded by six scandium (sodium) atoms. A careful investigation of this phase based on ab initio calculations indicates that the structure is dynamically unstable and gives rise to an energetically and dynamically more favorable phase with C222{sub 1} symmetry and nearly identical x-ray diffraction pattern. By additionally performing extensive structural searches with the minima-hopping method we discover a class of new low-energy structures exhibiting a novel structural motif in which each sodium (scandium) atom is surrounded by four scandium (sodium) atoms arranged at the corners of either a rectangle with nearly equal sides or a tetrahedron. These new phases are all predicted to be insulators with band gaps of 7.9–8.2 eV. Finally, we estimate the influence of these structures on the hydrogen-storage performance of NaSc(BH{sub 4}){sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pseudomonoenergetic x-ray diffraction measurements using balanced filters for coherent-scatter computed tomography

Coherent-scatter computed tomography (CSCT) is a method of ''composition'' imaging based on measurements of diffraction patterns from tissues. Use of an x-ray tube degrades scatter pattern angular resolution due to the x-ray spectral width, making it difficult to uniquely identify some materials. The use of two transmission filters with similar atomic numbers (balanced ''Ross filters'') to generate pseudomonoenergetic scatter patterns is described as it applies to CSCT. An analysis of angular-blur mechanisms reveals that focal spot size and beam width are the most important factors determining Bragg-peak width when Er-Tm filters are used. A relative RMS spectral width of 1% can be achieved in the difference spectrum and a Bragg-peak RMS angular width of approximately 0.14 deg. (relative width of 3% at 5 deg. scatter angle) can be achieved with an effective energy of 58 keV.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Synthesis of superparamagnetic silica-coated magnetite nanoparticles for biomedical applications

Multifunctional superparamagnetic iron oxide nanoparticles (SPIONs) coated with silica are widely researched for biomedical applications such as magnetic resonance imaging, tissue repair, cell separation, hyperthermia, drug delivery, etc. In this article synthesis of magnetite (Fe{sub 3}O{sub 4}) nanoparticles and their coating with SiO{sub 2} is reported. Fe{sub 3}O{sub 4} nanoparticles were synthesized by chemical co-precipitation and it was coated with silica by hydrolysis and condensation of tetraethylorthosilicate. XRD, FTIR, TEM and VSM techniques were used to characterize bare and coated nanoparticles. Results indicated that the average size of SPIONS was 8.4 nm. X-ray diffraction patterns of silica coated SPIONS were identical to that of SPIONS confirming the inner spinal structure of SPIONS. FTIR results confirmed the binding of silica with the magnetite and the formation of the silica shell around the magnetite core. Magnetic properties of SPIONS and silica coated SPIONS are determined by VSM. They are superparamagnetic. The major conclusion drawn from this study is that the synthesis route yields stable, non-aggregated magnetite-silica core-shell nanostructures with tailored morphology and excellent magnetic properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Study on low temperature DC electrical conductivity of SnO{sub 2} nanomaterial synthesized by simple gel combustion method

Nanocrystalline tin oxide (SnO{sub 2}) material of different particle size was synthesized using gel combustion method by varying oxidizer (HNO{sub 3}) and keeping fuel as a constant. The prepared samples were characterized by X-Ray Diffraction (XRD), Scanning Electron Microscope (SEM) and Energy Dispersive Analysis X-ray Spectroscope (EDAX). The effect of oxidizer in the gel combustion method was investigated by inspecting the particle size of nano SnO{sub 2} powder. The particle size was found to be increases with the increase of oxidizer from 8 to 12 moles. The X-ray diffraction patterns of the calcined product showed the formation of high purity tetragonal tin (IV) oxide with the particle size in the range of 17 to 31 nm which was calculated by Scherer’s formula. The particles and temperature dependence of direct (DC) electrical conductivity of SnO{sub 2} nanomaterial was studied using Keithley source meter. The DC electrical conductivity of SnO{sub 2} nanomaterial increases with the temperature from 80 to 300K and decrease with the particle size at constant temperature.

36 MATERIALS SCIENCE↗

Non-vacuum growth of graphene films using solid carbon source

This study demonstrates that air annealing can grow high-quality graphene films on the surface of polycrystalline nickel film with the help of an effective SiO{sub 2} capping layer. The number of graphene layers can be modulated by the amount of carbon embedded in the Ni film before annealing. Raman analysis results, transmission electron microscopy images, and electron diffraction patterns of the samples confirm that graphene films can be grown in air with an oxygen blocking layer and a 10 °C/s cooling rate in an open-vented rapid thermal annealing chamber or an open tube furnace. The high-quality low-defect air-annealing grown graphene is comparable to commercially available graphene grown via chemical vapor deposition. The proposed graphene growth using air annealing technique is simple and low-cost, making it highly attractive for mass production. It is transfer-free to a silicon substrate and can speed up graphene development, opening up new applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Optical properties of PbS/PVP nanocomposites films

PbS/Polyvinylpyrrolidone (PVP) nanocomposites films with different volume fraction of PbS have been deposited from single molecular precursors. X-ray diffraction patterns conforms the formation of PbS nanocrystals in PVP matrix. The transmission spectra of the films in the wavelength range of 300 to 2400 nm show the absorption edges are blue shifted due to formation of PbS Nanoparticles. The band gap determined are 2.4, 1.5 and 1.25 eV for PbS volume fraction of 8.5, 16, 27%, respectively. The corresponding refractive indices, n determined from Fresnel relation are 1.8, 2, and 2.35 which are in between that of PbS (4.2) and PVP (1.48).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phase Transitions in Lead Hafnate under High Pressure

The effect of hydrostatic pressure on phase transitions in lead hafnate (PbHfO{sub 3}) has been studied by the methods of X-ray diffraction and X-ray diffuse scattering. The measurements were performed in the temperature range of 182 < T < 316°C and the pressure range of 1.6 < P < 2.6 GPa. Four regions characterized by different X-ray diffraction patterns and corresponding to an antiferroelectric phase, phases with a long-wavelength modulation of the lead sublattice, and phases with different distortions of the oxygen sublattice are identified. In the temperature region immediately above the region of phases with a long-wavelength modulation, a temperature-dependent maximum in the distribution of diffuse scattering was detected, which means that such a modulation is formed due to condensation of an incommensurate soft mode.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic and thermodynamic properties of NdT{sub 2}Ge{sub 2} (T=Pd, Ag) compounds

Physical properties of NdPd{sub 2}Ge{sub 2} and NdAg{sub 2}Ge{sub 2}, crystallizing with the tetragonal ThCr{sub 2}Si{sub 2}-type crystal structure, were investigated by means of magnetic, calorimetric, electrical transport as well as by neutron diffraction measurements. The specific heat studies and neutron diffraction measurements were performed down to 0.30 K and 0.47 K, respectively. Both compounds exhibit antiferromagnetic ordering below T{sub N} equal to 1.5 K for NdPd{sub 2}Ge{sub 2} and 1.8 K for NdAg{sub 2}Ge{sub 2}. Neutron diffraction data for the latter germanide indicate antiferromagnetic collinear structure described by the propagation vector k=(0.5, 0, 0.5). The Nd magnetic moments equal to 2.24(5) mu{sub B} at 0.47 K are aligned along the a-axis and have the +- sequence within the crystal unit cell. For NdPd{sub 2}Ge{sub 2} only very small Bragg peaks of magnetic origin were observed in the neutron diffraction patterns measured below T{sub N}, thus hampering determination of the magnetic structure. Both compounds exhibit metallic-like electrical conduction. From the specific heat data the crystal electric field (CEF) levels schemes were determined. Difference between the overall CEF splitting in the two compounds is correlated with their structural parameters. - Graphical abstract: Low-temperature specific heat of NdAg{sub 2}Ge{sub 2} under external magnetic fields. The lambda-like anomaly originates from onset of magnetic ordering below 1.80 K. Shifting the anomaly position towards the lower temperatures, when raising the magnetic field, hints at antiferromagnetic behaviors.

36 MATERIALS SCIENCE↗

Crystal structure of Ba{sub 2}InTaO{sub 6} as determined by the Rietveld refinement

Rietveld profile analysis of X-ray diffraction data was carried out to determine the symmetry and crystal structures of the double perovskite Ba{sub 2}InTaO{sub 6}. Contrary to a recent study of Raman spectroscopy, we find no evidence that Ba{sub 2}InTaO{sub 6} adopts the tetragonal space group P4/mnc of the tilt system a{sup 0}a{sup 0}c{sup +}. Instead, it has cubic symmetry with the space group Fm3-bar m in the temperature range 82-723 K. In Ba{sub 2}InTaO{sub 6} the ordering between In(III) and Ta(V) cations is a difficult process requiring prolonged heat treatment at high temperature. -- Graphical abstract: Enlarged sections of the X-ray diffraction pattern of Ba{sub 2}InTaO{sub 6} showing the basic (222) and (400) reflections. Insert shows the evolution of these reflections as function of temperature. No peak splitting is observed in the temperature range between 82 and 723 K. Display Omitted Research highlights: {yields} The ordering between In(III) and Ta(V) cations in Ba{sub 2}InTaO{sub 6} is controlled by kinetic process requiring prolonged heat treatment. {yields} Ba{sub 2}InTaO{sub 6} adopts the cubic space group Fm3-bar m instead of tetragonal P4/mnc. {yields} No phase transition occurs in the temperature range between 82 and 723 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of Cu{sub 2}ZnSnS{sub 4} nanoparticles by solvothermal route

CZTS nanoparticles of size ~ 20 nm have been synthesized by solvothermal method. X-ray diffraction pattern confirms the growth of single phase CZTS nanoparticles with kesterite structure and lattice parameter obtained as a = b = 0.54 nm and c = 1.08 nm. The Raman peak observed at 338 cm{sup −1} also confirms the formation of pure CZTS phase. High resolution transition electron microscopy image confirms the good crystallinity of the CZTS nanoparticles with the growth along (112) plane. Energy dispersive spectroscopy confirms the stoichiometry of the CZTS nanoparticles. The CZTS nanoparticles exhibits a strong optical absorption in the visible region with direct band gap ~1.5 eV, which is optimum for photovoltaic application.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Formation of VO{sub 2} by rapid thermal annealing and cooling of sputtered vanadium thin films

Sputtered vanadium-rich films were subjected to rapid thermal annealing-cooling (RTAC) in air to produce vanadium dioxide (VO{sub 2}) thin films with thermochromic switching behavior. High heating and cooling rates in the thermal oxidation process provided an increased ability to control the film's microstructure. X-ray diffraction patterns of the films revealed less intense VO{sub 2} peaks compared to traditional polycrystalline samples fabricated with a standard (slower) cooling time. Such films also exhibit a high optical switching reflectance contrast, unlike the traditional polycrystalline VO{sub 2} thin films, which show a more pronounced transmittance switching. The authors find that the RTAC process stabilizes the VO{sub 2} (M2) metastable phase, enabling a rutile-semiconductor phase transition (R-M2), followed by a semiconductor–semiconductor phase transition (M2-M1).

36 MATERIALS SCIENCE↗

The influence of the concentration of Sr ions on the crystal and magnetic structures of Ba{sub 2} –{sub x}Sr{sub x}FeMoO{sub 6} double perovskites (x = 0–1.6)

The crystal and magnetic structures of a solid solution of double perovskite Ba{sub 2–} {sub x}Sr{sub x}FeMoO{sub 6} (x = 0–1.6) have been investigated by neutron diffraction. The high-resolution diffraction patterns have provided precise information about the changes in the crystal and magnetic structures with an increase in the strontium content and data on the behavior of the sample microstructure. Replacement of barium with strontium leads to a change in the lattice symmetry from cubic (x = 0, sp. gr. Fm3̄m)) to tetragonal (x = 0.4, sp. gr. I4/m). At x = 1.0, the symmetry is either tetragonal (sp. gr. I4/m) or orthorhombic (sp. gr. Fmmm), and at x = 1.6 the symmetry becomes again tetragonal (sp. gr. I4/m). The values of the Curie temperature and microstrain increase with an increase in the strontium content.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An electrochemical cell for in operando studies of lithium/sodium batteries using a conventional x-ray powder diffractometer

An electrochemical cell has been designed for powder X-ray diffraction studies of lithium ion batteries (LIB) and sodium ion batteries (SIB) in operando with high time resolution using a conventional powder X-ray diffractometer. The cell allows for studies of both anode and cathode electrode materials in reflection mode. The cell design closely mimics that of standard battery testing coin cells and allows obtaining powder X-ray diffraction patterns under representative electrochemical conditions. In addition, the cell uses graphite as the X-ray window instead of beryllium, and it is easy to operate and maintain. Test examples on lithium insertion/extraction in two spinel-type LIB electrode materials (Li{sub 4}Ti{sub 5}O{sub 12} anode and LiMn{sub 2}O{sub 4} cathode) are presented as well as first results on sodium extraction from a layered SIB cathode material (Na{sub 0.84}Fe{sub 0.56}Mn{sub 0.44}O{sub 2})

36 MATERIALS SCIENCE↗

EPR and optical investigations of LaMgAl{sub 11}O{sub 19}:Cr{sup 3+} phosphor

Graphical abstract: The EPR spectrum of as-prepared LaMgAl{sub 11}O{sub 19}:Cr{sup 3+} phosphor at 110 K. - Highlights: • Using the combustion synthesis, LaMgAl{sub 11}O{sub 19}:Cr{sup 3+} phosphor has been prepared in a few minutes. • Optical investigation indicates that Cr{sup 3+} ions are present in octahedral symmetry. • The EPR signals indicate that exchange coupled Cr{sup 3+}–Cr{sup 3+} ion pairs in weakly distorted sites. - Abstract: The LaMgAl{sub 11}O{sub 19}:Cr{sup 3+} phosphor has been prepared by a low-temperature combustion synthesis method. As-prepared combustion synthesized powder was characterized using powder X-ray diffraction (XRD), diffuse reflectance (DRS), electron paramagnetic resonance (EPR) and photoluminescence (PL) studies. The X-ray diffraction pattern reveals crystalline hexagonal phases. The UV–vis diffuse reflectance spectrum exhibits three broad bands characteristic of Cr{sup 3+} ions in octahedral symmetry. The EPR spectrum exhibits several resonance signals. The signals with the effective g values at g = 4.84, 3.64 and 2.26 have been attributed to the isolated Cr{sup 3+} ions. The signal with the effective g value at g = 1.94 has been attributed to exchange coupled Cr{sup 3+}–Cr{sup 3+} ion pairs. The PL studies exhibit several bands characteristic of Cr{sup 3+} ions in octahedral symmetry.

36 MATERIALS SCIENCE↗