Search NASA⌕ Search

SEARCH · Search NASA

Results for “FORESTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Development of a statewide Landsat digital data base for forest insect damage assessment

A Joint Research Project (JRP) invlving NASA/Goddard Space Flight Center and the Pennsylvania Bureau of Forestry/Division of Forest Pest Management demonstrates the utility of Landsat data for assessing forest insect damage. A major effort within the project has been the creation of map-registered, statewide Landsat digital data base for Pennsylvania. The data base, developed and stored on computers at the Pennsylvania State University Computation Center, contains Landsat imagery, a Landsat-derived forest resource map, and digitized data layers depicting Forest Pest Management District boundaries and county boundaries. A data management front-end system was also developed to provide an interface between the various layers of information within the data base and image analysis software. This front-end system insures than an automated assessment of defoliation damage can be conducted and summarized by geographic area or jurisdiction of interest.

Williams, D. L.↗

Analysis of Landsat-4 Thematic Mapper data for classification of forest stands in Baldwin County, Alabama

A computer-implemented classification has been derived from Landsat-4 Thematic Mapper data acquired over Baldwin County, Alabama on January 15, 1983. One set of spectral signatures was developed from the data by utilizing a 3x3 pixel sliding window approach. An analysis of the classification produced from this technique identified forested areas. Additional information regarding only the forested areas. Additional information regarding only the forested areas was extracted by employing a pixel-by-pixel signature development program which derived spectral statistics only for pixels within the forested land covers. The spectral statistics from both approaches were integrated and the data classified. This classification was evaluated by comparing the spectral classes produced from the data against corresponding ground verification polygons. This iterative data analysis technique resulted in an overall classification accuracy of 88.4 percent correct for slash pine, young pine, loblolly pine, natural pine, and mixed hardwood-pine. An accuracy assessment matrix has been produced for the classification.

Hill, C. L.↗

Fungi of Mount Babia Gora. 3: The indicating value of macromycetes in the forest associations

The results of a mycological investigation of the forests of the upper mountain forest zone of Mt. Babia Gora and the synthetic characteristics of participation of macromycetes in all the forests studied are presented. Regularities and distinct connections were found in the occurrence of macromycetes on the background of various forest associations, differences in exposure, orography, climate, and changes induced by man.

Bujakiewicz, A.↗

Modeling long-term changes in forested landscapes and their relation to the Earth's energy balance

The dynamics of the forested parts of the Earth's surface on time scales from decades to centuries are discussed. A set of computer models developed at Oak Ridge National Laboratory and elsewhere are applied as tools. These models simulate a landscape by duplicating the dynamics of growth, death and birth of each tree living on a 0.10 ha element of the landscape. This spatial unit is generally referred to as a gap in the case of the forest models. The models were tested against and applied to a diverse array of forests and appear to provide a reasonable representation for investigating forest-cover dynamics. Because of the climate linkage, one important test is the reconstruction of paleo-landscapes. Detailed reconstructions of changes in vegetation in response to changes in climate are crucial to understanding the association of the Earth's vegetation and climate and the response of the vegetation to climate change.

Shugart, H. H.↗

Feature selection and the information content of Thematic Mapper simulator data for forest structural assessment

An assessment is made of the information content of Thematic Mapper Simulator (TMS) data for the case of a forested region, in order to determine the sensitivity of such data to forest crown closure and tree size class. Principal components analysis and Monte Carlo simulation indicated that channels 4, 7, 5 and 3 were optimal for four-channel forest structure analysis. As the number of channels supplied to the Monte Carlo feature selection routine increased, classification accuracy increased. The greatest sensitivity to the forest structural parameters, which included succession within clearcuts as well as crown closure and size class, was obtained from the 7-channel TMS data.

Spanner, M. A.↗

Feature selection and information content of thematic mapper simulator data for a forested environment

Feature selection and the information content of Thematic Mapper Simulator (TMS) data are investigated for a forested region in northern Idaho. The optimal TMS channels for forest structural characteristics are determined, and the capability of TMS data to describe the structural variability within a forest stand is evaluated. The comparative performance of TMS and MSS data to discriminate forest structural factors using per-pixel maximum likelihood classification is examined, and four optimal TMS channels are classified in order to ascertain if the full complement of TM channels provide higher accuracies than the four optimal ones.

Spanner, M. A.↗

Application of AIS Technology to Forest Mapping

Concerns about environmental effects of large scale deforestation have prompted efforts to map forests over large areas using various remote sensing data and image processing techniques. Basic research on the spectral characteristics of forest vegetation are required to form a basis for development of new techniques, and for image interpretation. Examination of LANDSAT data and image processing algorithms over a portion of boreal forest have demonstrated the complexity of relations between the various expressions of forest canopies, environmental variability, and the relative capacities of different image processing algorithms to achieve high classification accuracies under these conditions. Airborne Imaging Spectrometer (AIS) data may in part provide the means to interpret the responses of standard data and techniques to the vegetation based on its relatively high spectral resolution.

Yool, S. R.↗

Directional reflectance distributions of a hardwood and pine forest canopy

A hand-held radiometer with AVHRR bands 1 and 2 was used to measure the directional reflectance distributions for both a hardwood and a pine forest canopy from a helicopter platform; canopy characteristics were also measured on the ground. The reflectance distributions obtained are compared with the scattering behavior of agricultural and natural grassland canopies. In addition, the Kimes (1983) three-dimensional radiative transfer model is used to document the unique radiant transfers that occur in forest canopies in virtue of their geometric structure. Both the measurements and the model calculations show that dense forest canopy scattering is similar to that for crops and grasslands. Attention is given to the effects of sparse forest canopies.

Kimes, D. S.↗

A preliminary report on the measurements of forest canopies with C-band radar scatterometer at NASA/NSTL

This paper presents preliminary results of C-band radar scatterometer measurements of forest canopies of southeastern forests in the vicinity of NASA/NSTL. The results are as follows: (1) the radar backscattering coefficients (BSC) of deciduous forests such as oak, maple, blackgum, and cypress are higher than those of coniferous forests such as slash pine plantation and natural pine; (2) at a large incidence angle, where polarization effect is significant, and by ranging measurement, the VV polarization BSC obtain peak value at the first few meters from the canopy top and decrease rather quickly, while the HH polarization BSC obtain peak value at longer distances from the canopy top and decrease rather slowly through the canopy; and (3) using the active radar calibrator for tree canopy attenuation measurement of a dense and a sparse live oak, it is found that the tree canopies with higher attenuations have higher BSC for all three polarizations, with VV polarization containing the largest differential (2.2 dB).

Wu, S. T.↗

Lithologic mapping in a forested region using remotely sensed data

Forest canopies over different sedimentary lithologies of valleys and ridges are composed of different dominant species and have significantly different reflectance and emittance. In a botanical survey of eighty-seven forest sites, sedimentary lithologies were found to differ in the species which dominate the forest canopy. Sandstone sites had abundant chestnut oak (Quercus prinus), black oak (Q. velutina), and northern red oak (Q. rubra). On shale sites chestnut oak, white oak (Q. alba), northern red oak and red pine (Pinus resinosa) were dominant. Limestone sites had a variable species composition with the most common species, northern red oak, white oak, and black locust (Robinia pseudocacia) accounting for only 30 percent of the total trees. Thematic Mapper Simulator (TMS) data obtained during the growing season were analyzed to determine if sandstones, shales, and limestones could be distinguished on the basis of forest-canopy reflectance. The observations compared in the analysis were means of the eight TMS bands for 10 x 10-pixel test sites selected from areas with complete canopy closure. In August imagery the three lithologies were separable based on differences in TMS band 3 (630-690 nm) and band 8 (10.4-12.5 microns).

Masuoka, E.↗

Analysis of AIS data of the Bonanza Creek Experimental Forest, Alaska

Airborne Imaging Spectrometer (AIS) data were acquired in 1985 over the Bonanza Creek Experimental Forest, Alaska for the analysis of canopy characteristics including biochemistry. Concurrent with AIS overflights, foliage from fifteen coniferous and deciduous forest stands were analyzed for a variety of biochemical constituents including nitrogen, lignin, protein, and chlorophyll. Preliminary analysis of AIS spectra indicates that the wavelength region between 1450 to 1800 namometers (nm) displays distinct differences in spectral response for some of the forest stands. A flat field subtraction (forest stand spectra - flat field spectra) of the AIS spectra assisted in the interpretation of features of the spectra that are related to biology.

Spanner, M. A.↗

Use of TMS/TM data for mapping of forest decline damage in the northeastern United States

Remote sensing systems were used to monitor forest decline damage suspected of being due to air pollution. Field activities and aircraft overflights were centered on montane spruce/fir forest sites. Using aircraft data acquired with the Thematic Mapper Simulator (TMS) and LANDSAT Thematic Mapper (TM) during the growing season, extensive areas of forest decline damage were accurately mapped. Seven levels of decline damage are discrininated and mapped and the levels of discriminated damage agree well (rsq-0.94) with visual assessment conducted on the ground. New areas of high damage were discovered. A band ratio (TM5/TM4) is most useful in discriminating and quantifying the various levels of forest decline damage.

Rock, B. N.↗

Interpreting forest and grassland biome productivity utilizing nested scales of image resolution and biogeographical analysis

This report summarizes progress made in our investigation of forest productivity assessment using TM and other biogeographical data during the third six-month period of the grant. Data acquisition and methodology hurdles are largely complete. Four study areas for which the appropriate TM and ancillary data were available are currently being intensively analyzed. Significant relationships have been found on a site by site basis to suggest that forest productivity can be qualitatively assessed using TM band values and site characteristics. Perhaps the most promising results relate TM unsupervised classes to forest productivity, with enhancement from elevation data. During the final phases of the research, multi-temporal and regional comparisons of results will be addressed, as well as the predictability of forest productivity patterns over a large region using TM data and/or TM nested within AVHRR data.

Iverson, Louis R.↗

Preliminary report on measurements of forest canopies with C-band radar scatterometer at NASA/NSTL

This paper presents preliminary results of C-band radar scatterometer measurements of forest canopies of southeastern forests in the vicinity of NASA/NSTL. The results are as follows: radar backscattering coefficients (BSCs) of deciduous forests are higher than those of coniferous forests at a large incidence angle by ranging measurement, the VV polarization BSCs obtain peak value at the first few meters from the canopy top and decrease rather quickly, while the HH polarization BSCs obtain peak value at longer distances from the canopy top and decrease rather slowly through the canopy; and tree canopies with higher attenuations have higher BSCs for all three polarizations, with VV polarization containing the largest differential (2.2 dB).

Wu, S.-T.↗

Mobile satellite communications in the Forest Service

There are usually some places within a forest that do not have adequate communication coverage due to line-of-sight or other reasons. These areas are generally known by the foresters and radio technicians and allowances are made for that when working or traveling in those areas. However, when wildfire or other emergencies occur, communications are vital because wildfires can require hundreds of firefighters and cover thousands of acres. During these emergency operations, the existing communications are not adequate and complete radio systems are moved into the area for the conduct of fire communications. Incident command posts (ICPs) and fire camps are set up in remote locations and there is constant need for communications in the fire area and to agency headquarters and dispatch offices. Mobile satellite communications would be an ideal supplement to the Forest Service's current communications system in aiding forest fire control activities.

Warren, John R.↗

The use of remotely sensed data for the monitoring of forest change in tropical areas

This paper provides an overview of the use of several remote sensing systems for monitoring changes in tropical forests. Particular attention is given to the use of data from the AVHRR sensors on the NOAA series of satellites, the Landsat MSS and TM, and aircraft and spacecraft acquired Synthetic Aperture Radar. Multisensor and multistage approaches to monitoring change in tropical forests is examined. Forest change monitoring through a geographic information system (GIS) approach is addressed. Finally some suggestions are made for research addressing forest change monitoring in tropical areas.

Joyce, Armond T.↗

Improvement and extension of a radar forest backscattering model

Radar modeling of mangal forest stands, in the Sundarbans area of Southern Bangladesh, was developed. The modeling employs radar system parameters with forest data on tree height, spacing, biomass, species combinations, and water (including slightly conductive water), content both in leaves and trunks of the mangal. For Sundri and Gewa tropical mangal forests, six model components are proposed, which are required to explain the contributions of various forest species combinations in the attenuation and scattering of mangal vegetated nonflooded or flooded surfaces. Statistical data of simulated images were compared with those of SIR-B images both to refine the modeling procedures and to appropriately characterize the model output. The possibility of delineation of flooded or nonflooded boundaries is discussed.

Simonett, David S.↗

An evaluation of imaging spectrometry for estimating forest canopy chemistry

High spectral resolution Airborne Imaging Spectrometer (AIS) data were acquired over 20 well-studied Wisconsin forest sites to evaluate the potential of remote sensing for estimating forest canopy chemistry. Intensive nutrient cycling research in these forests demonstrates that canopy lignin content is strongly related to measured annual nitrogen mineralization at the undisturbed sites and may serve as an accurate index for nitrogen cycling rates. Ground measurements were made of foliar biomass and canopy nitrogen and lignin content, the latter within two weeks of the AIS overflight. The spectral data were transformed using derivative techniques modified from laboratroy spectroscopy. Stepwise regression assisted in determining combinations of wavelengths most highly correlated with canopy chemistry and biomass. Strong correlations between AIS data and total canopy lignin content in deciduous forests and canopy lignin concentration (total lignin/biomass) in both deciduous and coniferous stands indicate that imaging spectrometry can be used to estimate canopy lignin content and, from that, the spatial distribution of annual nitrogen mineralization rates.

Wessman, Carol A.↗