Search NASA⌕ Search

SEARCH · Search NASA

Results for “Graphite modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Dielectric relaxation of alkyl chains in graphite oxide and n-alkylammonium halides

The dynamic of n-alkylammonium halides and n-alkylammonium cations (n = 12, 14, 16, 18) intercalated in graphite oxide (GO) have been investigated with complex impedance spectroscopy. X-ray diffraction, X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, elemental analysis and thermogravimetry served to characterize the materials. The intercalated alkylammonium cations distributes as monolayers (when n = 12, 14 or 16) or bilayers (when n = 18), with their long axis parallel to GO layers, and with cations of headgroups bonded ionically to C-O{sup -} groups of GO; backbones of the confined molecules remain free. All halides and intercalation compounds suffer dielectric loss at low temperature. Arrhenius plots of the thermal dependence of the loss peaks, which are asymmetric, produce apparent activation energies that rise with increasing n. Ngai’s correlated-state model helps to correct for effects of dipole-dipole interaction, leading to virtually identical values for actual activation energy of 110 meV ± 5%; the values are also almost the same as the barrier energy for internal rotation in the alkyl macromolecule. We conclude that the relaxation of the alkylammonium cations arises not from C{sub 3} reorientation of the CH{sub 3} at its headgroup, but from small-angle wobbling around its major axis, an intrinsic motion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Processable conductive graphene/polyethylene nanocomposites: Effects of graphene dispersion and polyethylene blending with oxidized polyethylene on rheology and microstructure

Poor dispersion of graphene in non-polar polymer matrices creates composites with limited applications. A method to improve the dispersion of graphene in polyethylene (PE) via blending PE with oxidized PE (OPE) is examined. Graphene was produced by simultaneous thermal exfoliation and reduction of graphite oxide. Nanocomposites of graphene with PE as well as graphene with PE/OPE-blends were prepared by solvent blending. Improved dispersion of graphene in PE/OPE blends substantially decreases percolation from both rheological (0.3 vol%) and electrical (0.13 vol%) measurements compared to neat PE nanocomposites (1 and 0.29 vol%), respectively. A universal Brownian dispersion of graphene in polymers was concluded similar to that of nanotubes, following the Doi-Edwards theory. Micromechanical models, such as Mori-Tanaka and Halpin-Tsai models, modeled the mechanical properties of the nanocomposites. The nanocomposites microstructure, studied by small angle x-ray scattering, confirmed better dispersion of graphene at lower loadings and the formation of surface fractals in the blend/graphene nanocomposites; whereas only mass fractals were observed in neat PE/graphene nanocomposites.

graphene↗

Noble Gas Transport in the MSRE

This study explores the relationship between the physicochemical parameter known as Henry’s gas constant and gas transport across a two-layer film interface. The investigation utilized the Gibbs free energy, incorporating surface and volume terms to elucidate trends in enthalpy and entropy. Notably, our findings align with experimental data and offer predictive insights into the Henry’s gas constants for helium and krypton, which hold significance for future experiments and theoretical developments. Furthermore, this study enhances the Gibbs free energy theory pertaining to the liquid–gas interface. It underscores the substantial contribution of noble gases in this region to volumetric energy as temperature increases. Additionally, we employed Monte Carlo simulations to analyze the effective thermal neutron multiplication factor, denoted as k eff . Our analysis reveals a linear correlation between graphite density and uniform density as a function of temperature. For the 1D Molten Salt Reactor Experiment (MSRE) system, we employed the Mole code to conduct heat and mass transfer calculations. These computations enable us to ascertain the distribution of fuel temperature based on coefficients and thermal properties. We also studied delayed neutron precursors during fuel cycling, taking into account the drift of cycling fuel through Mole–Griffin coupling. Our model represents k eff and β eff across various volume flow rates and salinity compositions. Finally, this study leveraged xenon-135 for continuous on-line monitoring of fuel salts to investigate the impact of steady-state xenon-135 on the MSRE and to better understand its distribution. These efforts build upon previous research related to removal processes.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Neutron and gamma field investigations in the VVER-1000 mock-up concrete shielding on the reactor LR-0

Two sets of neutron and gamma field investigations were carried out in the dismountable model of radiation shielding of the VVER-1000 mock-up on the LR-0 reactor. First, measurements and calculations of the {sup 3}He(n,p)T reaction rate and fast neutrons and gamma flux spectra in the operational neutron monitor channel inside a concrete shielding for different shapes and locations of the channel (cylindrical channel in a concrete, channels with collimator in a concrete, cylindrical channel in a graphite). In all cases measurements and calculations of the {sup 3}He(n,p)T reaction rate were done with and without an additional moderator-polyethylene insert inside the channel. Second, measurements and calculations of the {sup 3}He(n,p)T reaction rate spatial distribution inside a concrete. The {sup 3}He(n,p)T reaction rate measurements and calculations were carried out exploring the relative thermal neutron density in the channels and its space distribution in the concrete. Fast neutrons and gamma measurements were carried out with a stilbene (45 x 45 mm) scintillation spectrometer in the energy regions 0.5-10 MeV (neutrons) and 0.2-10 MeV (gammas). (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Phenomena Identification and Ranking Table (PIRT) for Fluoride High-Temperature Reactor (FHR) Neutronics

The deployment of Fluoride (salt-cooled) High Temperature Reactors (FHRs) has many potential benefits such as improved safety, improved economics, and a diversification of the energy portfolio because of its capability to supply industrial process heat. However, significant challenges remain before this class of reactors can be deployed, mostly related to its technology readiness. A recent study identified several areas in need of further development in order to advance the technology. These include the verification and validation of neutronics and thermal hydraulics modeling and simulation tools in support of design, safety analysis and licensing. The focus of this paper is to summarize the issues for verification and validation of neutronics tools. Current tools for neutronics analysis of LWRs are inadequate for the simulation of salt cooled reactors. The methodologies developed for the high temperature gas cooled reactors (HTGRs) have some relevance for FHRs because of the similarities between the two reactors such as graphite block structure, encapsulated fuel particles, and high operating temperatures. However, they are not sufficient for the accuracy desired of a code for licensing as they have a number of important differences neutronically, such as the use of liquid salt containing beryllium as a coolant and their unique fuel configuration.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

SELF-LIMITING TRANSIENT PULSE SIMULATION METHOD EXHIBITING TIME LAG PHENOMENON USING MAMMOTH

Coupling of multi-physics and multi-scale allows the exploration of phenomenon not previously studied with high fidelity. The heat diffusion time lag in TREAT-like fuel requires both multi-physics and multi-scale coupling to model the full transient behavior. The reactor physics code MAMMOTH, which has the ability to couple the heat conduction equation and the neutron diffusion equation, simulated a self-limiting transient pulse meeting these requirements. The MOOSE MultiApp system allowed the coupling of many micro-scale simulations with a single macro-scale simulation. The micro-scale geometry was a 0.0044 cm diameter UO2 fuel grain surrounded by a graphite moderator. The macro-scale geometry was a homogeneous fuel with the same isotope ratio of the micro-scale material surrounded by a graphite reflector. Two temperature-dependent two energy group cross-section libraries were computed using Serpent 2 for use in MAMMOTH. Both the homogeneous unit cell and heterogeneous unit cell cross-section library had infinite reactor boundary conditions. The macro-scale simulation had finite boundary conditions. By varying the feedback temperature, macro or micro, given to the cross-sections, the effect of the time lag was explored using a Picard coupling method. The time lag increases the peak power density by 9 % to 10 % and the energy deposited by 8 % to 9 %. The effect of differing grain and moderator temperature at the micro-scale was also explored showing differences in time lag behavior. Future research will improve the fidelity of the method through representative macro-scale geometries, temperature-dependent cross-sections, and greater energy group resolution.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Phenomena Identification and Ranking Table (PIRT) for Fluoride High-Temperature Reactor (FHR) Neutronics

The deployment of Fluoride (salt-cooled) High Temperature Reactors (FHRs) has many potential benefits such as improved safety, improved economics, and a diversification of the energy portfolio because of its capability to supply industrial process heat. However, significant challenges remain before this class of reactors can be deployed, mostly related to its technology readiness. A recent study identified several areas in need of further development in order to advance the technology. These include the verification and validation of neutronics and thermal hydraulics modeling and simulation tools in support of design, safety analysis and licensing. The focus of this paper is to summarize the issues for verification and validation of neutronics tools. Current tools for neutronics analysis of LWRs are inadequate for the simulation of salt cooled reactors. The methodologies developed for the high temperature gas cooled reactors (HTGRs) have some relevance for FHRs because of the similarities between the two reactors such as graphite block structure, encapsulated fuel particles, and high operating temperatures. However, they are not sufficient for the accuracy desired of a code for licensing as they have a number of important differences neutronically, such as the use of liquid salt containing beryllium as a coolant and their unique fuel configuration. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

AGR-1, AGR-2 and AGR-3/4 Release-to-Birth Ratio Data Analysis

A series of Advanced Gas Reactor (AGR) irradiation tests is being conducted in the Advanced Test Reactor at Idaho National Laboratory in support of development and qualification of tristructural isotropic (TRISO) low enriched fuel used in the High Temperature Gas-cooled Reactor (HTGR). Each AGR test consists of multiple independently controlled and monitored capsules containing fuel compacts placed in a graphite cylinder shrouded by a steel shell. These capsules are instrumented with thermocouples embedded in the graphite enabling temperature control. AGR configuration and irradiation conditions are based on prismatic HTGR technology distinguished primarily by the use of helium coolant, a low-power-density ceramic core capable of withstanding very high temperatures, and TRISO coated particle fuel. Thus, these tests provide valuable irradiation performance data to support fuel process development, qualify fuel for normal operating conditions, and support development and validation of fuel performance and fission product transport models and codes. The release-rate-to-birth-rate ratio (R/B) for each of fission product isotopes (i.e., krypton and xenon) is calculated from release rates in the sweep gas flow measured by the germanium detectors used in the AGR Fission Product Monitoring (FPM) System installed downstream from each irradiated capsule. Birth rates are calculated based on the fission power in the experiment and fission product generation models. Thus, this R/B is a measure of the ability of fuel kernel, particle coating layers, and compact matrix to retain fission gas atoms preventing their release into the sweep gas flow, especially in the event of particle coating failures that occurred during AGR-2 and AGR-3/4 irradiations. The major factors that govern gaseous radioactive decay, diffusion, and release processes are found to be material diffusion coefficient, temperature, and isotopic decay constant. For each of all AGR capsules, ABAQUS-based three-dimensional finite-element thermal models are created to predict daily averages of fuel compact temperatures for the entire irradiation period, which are used in establishing the R/B correlation with temperature and decay constant. This correlation can be used by reactor designers to estimate fission gas release from postulated failed fuel particles in HTGR cores, which is the key safety factor for fuel performance assessment.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

AGR-2 and AGR-3/4 Release-to-Birth Ratio Data Analysis

A series of Advanced Gas Reactor (AGR) irradiation tests is being conducted in the Advanced Test Reactor at Idaho National Laboratory in support of development and qualification of tristructural isotropic (TRISO) low enriched fuel used in the High Temperature Gas-cooled Reactor (HTGR). Each AGR test consists of multiple independently controlled and monitored capsules containing fuel compacts placed in a graphite cylinder shrouded by a steel shell. These capsules are instrumented with thermocouples embedded in the graphite enabling temperature control. AGR configuration and irradiation conditions are based on prismatic HTGR technology distinguished primarily by the use of helium coolant, a low-power-density ceramic core capable of withstanding very high temperatures, and TRISO coated particle fuel. Thus, these tests provide valuable irradiation performance data to support fuel process development, qualify fuel for normal operating conditions, and support development and validation of fuel performance and fission product transport models and codes. The release-rate-to-birth-rate ratio (R/B) for each of fission product isotopes (i.e., krypton and xenon) is calculated from release rates in the sweep gas flow measured by the germanium detectors used in the AGR Fission Product Monitoring (FPM) System installed downstream from each irradiated capsule. Birth rates are calculated based on the fission power in the experiment and fission product generation models. Thus, this R/B is a measure of the ability of fuel kernel, particle coating layers, and compact matrix to retain fission gas atoms preventing their release into the sweep gas flow, especially in the event of particle coating failures that occurred during AGR-2 and AGR-3/4 irradiations. The major factors that govern gaseous radioactive decay, diffusion, and release processes are found to be material diffusion coefficient, temperature, and isotopic decay constant. For each of all AGR capsules, ABAQUS-based three-dimensional finite-element thermal models are created to predict daily averages of fuel compact temperatures for the entire irradiation period, which are used in establishing the R/B correlation with temperature and decay constant. This correlation can be used by reactor designers to estimate fission gas release from postulated failed fuel particles in HTGR cores, which is the key safety factor for fuel performance assessment.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

3D Flow and Temperature Analysis of Filling a Plutonium Mold (Revision 1) [Poster]

The plutonium foundry at Los Alamos National Laboratory casts products for various special nuclear applications. However, plutonium’s radioactivity, material properties, and security constraints complicate the ability to perform experimental analysis of mold behavior. The Manufacturing Engineering and Technologies (MET-2) group previously developed a graphite mold to vacuum cast small plutonium disks to be used by the Department of Homeland Security as point sources for radiation sensor testing. A two-stage pouring basin consisting of a funnel and an angled cavity directs the liquid into a vertical runner. A stack of ten disk castings connect to the runner by horizontal gates. Volumetric flow rates were implemented to limit overflow into the funnel and minimize foundry returns. Models using Flow-3D computational fluid dynamics software are employed here to determine liquid Pu flow paths, optimal pour regimes, temperature changes, and pressure variations.

36 MATERIALS SCIENCE↗

Solid Radiochemistry Nuclear Diagnostic Results from Exploding Pusher Shot (N130503-002) at the National Ignition Facility

The Solid Radiochemistry (SRC) nuclear diagnostic platform has been developed for the assessment of various performance parameters, such as areal fuel density and ablator-fuel mixing, associated with the capsule implosion of DT-fuel, hohlraum based shots at the National Ignition Facility (NIF). This diagnostic is based on the collection and characterization of debris from the capsule and surrounding materials (primarily gold from the hohlraum). SRC utilizes two diagnostic instrument manipulators (DIMs), 90-78 and 0-0, to field debris collectors (maximum of four metallic and/or graphite foils per DIM) inside the NIF chamber during shots. The debris collectors are removed after a shot and transferred to the Nuclear Counting Facility (NCF) for the measurement of gold activation (Au-196m and Au-196) and capture (Au-198) products via gamma spectroscopy. The results from SRC which show a strong dependency on an independently measured neutron down scatter ratio (DSR) are utilized as part of a 1-D capsule model to determine the areal densities (ρR(DT) and ρR(CH)) during burn. This report summarizes the SRC results from the Indirect Drive Exploding Pusher shot (N130503-002) designed to produce low ρR at burn time (~40 mg/cm 2 ) leading to a significant decrease in DSR (0.23±0.07 %). As a result, this shot is considered a calibration shot for SRC nuclear diagnostic.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

AGR-2 and AGR-3/4 Release-to-Birth Ratio Data Analysis

A series of Advanced Gas Reactor (AGR) irradiation tests is being conducted in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL) in support of development and qualification of tristructural isotropic (TRISO) low enriched fuel used in the High Temperature Gas-cooled Reactor (HTGR). Each AGR test consists of multiple independently controlled and monitored capsules containing fuel compacts placed in a graphite cylinder shrouded by a steel shell. These capsules are instrumented with thermocouples embedded in the graphite enabling temperature control. AGR configuration and irradiation conditions are based on prismatic HTGR technology that is distinguished primarily through use of helium coolant, a low-power-density ceramic core capable of withstanding very high temperatures, and TRISO coated particle fuel. Thus, these tests provide valuable irradiation performance data to support fuel process development, qualify fuel for normal operating conditions, and support development and validation of fuel performance and fission product transport models and codes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Density Effects on Lock Exchange Flow During a DCC

The High Temperature Test Facility (HTTF) is a scaled, electric model at Oregon State University (OSU) of the Modular High Temperature Gas Reactor (MHTGR) by General Atomics. There are a few major differences between the design and the OSU facility. In the HTTF the reactor pressure vessel and the reactor cavity are in two separate tanks connected by a crossover duct similar to the crossover duct that would be seen between the reactor core and the steam generator in the MHTGR. This feature allows for the facility to open two main break valves simulating a Double-Ended Guillotine Break (DEGB) of the cross over duct, synonymous to a crossover duct break in the MHTGR. The density gradient driven flow phenomena in the HTTF duct can then be studied further. This break would cause a depressurization of the reactor and a loss of flow. It is called the Depressurized Loss of Forced Convection Accident (D-LOFC), also known as the Depressurized Conduction Cool-Down Event for High Temperature Gas Reactors (HTGRs) because heat removal is by conduction through the core and radiation out of the vessel. The HTTF was built and scaled to maintain the highest accuracy for the DCC. Prototypical temperatures with an inlet temperature of 259 deg. C and an outlet temperature of 687 deg. C are maintained in the HTTF. The temperature profile is also maintained in the smaller volume by using a ceramic core. The HTTF uses graphite heaters because the resistive heat produced does not change significantly with temperature . In order to produce a facility of similar temperatures within the allotted budget, sacrifices had to be made in other areas. The HTTF is scaled one-fourth in diameter, one-fourth in height and one-eighth in pressure of the MHTGR. There are also a few limitations for the HTTF. While in the MHTGR, the cavity is filled with air, the HTTF uses highly pure Nitrogen and does not have the ability to simulate a full depressurization. The DCC event is traditionally comprised of multiple stages: depressurization, molecular diffusion and natural circulation. However, this traditional interpretation ignores lock exchange flow which will occur immediately following depressurization and could have significant consequences in the reactor. It was found that the traditional model underestimates the amount of air ingress by at least 660 times according to Oh and Kim in their theoretical research of air ingress. Molecular diffusion also decreases with stratification. Any model that specifies the gases are stratified has further underestimated the air ingress of the DCC event. In addition, molecular diffusion is a much slower process, allowing the reactor to shut down and cool off considerably from operating temperatures. Thus, understanding lock exchange flow, the air ingress concentrations and the time scale is critical to MHTGR research and licensing. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Recent advances in two-dimensional materials beyond graphene

The isolation of graphene in 2004 by peeling apart the atomically-thin sheets that comprise graphite was a defining moment for the birth of a field: Two-dimensional (2D) materials. In recent years, there has been a rapidly increasing number of papers focusing on non-graphene layered materials, including transition-metal dichalcogenides (TMDs), because of the new properties and applications that emerge upon 2D confinement. Here we review significant recent advances and important new developments in 2D materials beyond graphene . We provide insight into the theoretical modeling and understanding of the van der Waals forces that hold together the 2D layers in bulk solids, as well as their excitonic properties and growth morphologies. Additionally, we highlight recent breakthroughs in TMD synthesis and characterization and discuss the newest families of 2D materials, including monoelement 2D materials (i.e., silicene, phosphorene, etc.) and transition metal carbide- and carbon nitride-based MXenes. We then discuss the doping and functionalization of 2D materials beyond graphene, which enable device applications, followed by advances in electronic, optoelectronic, and magnetic devices and theory. In conclusion, we provide perspectives on the future of 2D materials beyond graphene.

36 MATERIALS SCIENCE↗

Use of a Mylar filter to eliminate vacuum ultraviolet pulse pileup in low-energy x-ray measurements

We describe a method to reduce vacuum ultraviolet (VUV) pulse pileup (PPU) in x-ray pulse-height Silicon Drift Detector (SDD) signals. An Amptek FAST SDD, with C1 (Si 3 N 4 ) window, measures bremsstrahlung emitted from PFRC-2 plasma to extract the electron temperature (T e ) and density (n e ). The C1 window has low transmissivity for photons with energy below 200 eV though will transmit some VUV and soft x-ray photons, which PFRC-2 plasmas abundantly emit. Multi-VUV-photon PPU contaminates the interpretation of x rays with energy > 100 eV, particularly in a low-energy exponential tail. The predicted low transmissivity of ~1 μm thick Mylar [polyethylene terephthalate (PET)] to photons of energy <100 eV led to the selection of Mylar as the candidate filter to reduce VUV PPU. Experiments were conducted on an x-ray tube with a graphite target and on a quasi-Maxwellian tenuous plasma (n e ~ 10 9 cm –3 ) with effective temperatures reaching 1500 eV. A Mylar filter thickness of 850 nm is consistent with the results. The Mylar-filter-equipped SDD was then used on the PFRC-2 plasma, showing a substantial reduction in the low-energy x-ray signal, supporting our hypothesis of the importance of VUV PPU. Here, we describe the modeling and experiments performed to characterize the effect of the Mylar filter on SDD measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Improved Prediction of the Doppler Effect in TRISO Fuel

The Doppler feedback mechanism is a major contributor to the passive safety of gas-cooled, graphite-moderated High Temperature Reactors that use fuel based on TRISO particles. It follows that the correct prediction of the magnitude and time-dependence of this feedback effect is essential to the conduct of safety analyses for these reactors. Since the effect is directly dependent on the actual temperature reached by the fuel during transients, the underlying phenomena of heat transfer and temperature rise must be correctly predicted. This paper presents an improved model for the TRISO particle and its thermal behavior during transients. The improved approach incorporates an explicit TRISO heat conduction model to better quantify the time dependence of the temperature in the various layers of the TRISO particle, including its fuel central zone. There follows a better treatment of the Doppler Effect within said fuel zone. The new model is based on a 1-D analytic solution for composite media using the Green’s function technique. The modeling improvement takes advantage of some of the physical behavior of TRISO fuel under irradiation and includes a distinctive look at the physics of the neutronic Doppler Effect. The new methodology has been implemented within the coupled R-Z nodal diffusion code CYNOD-THERMIX. The new model has been applied to the analysis of earthquakes (presented in a companion paper). In this paper, the model is applied to the control rod ejection event, as specified in the OECD PBMR-400 benchmark, but with temperature dependent thermal properties. The results obtained for this transient using the enhanced code are a considerable improvement over the predictions of the original code. The incorporation of the enhanced model shows that the Doppler Effect plays a more significant role than predicted by the original unenhanced model based on the THERMIX homogenized fuel region model. The new model shows that the overall energy generation during the rod ejection transient is significantly lower than predicted by the unenhanced model. The fuel temperature reaches a slightly higher maximum, but at no time does it approach the nominal allowable TRISO fuel temperature. The analyses with the enhanced model also show that the reactor period during the cool down is larger than previously predicted with the homogenous fuel region model.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗