Search NASA⌕ Search

SEARCH · Search NASA

Results for “INTEREST GROUPS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Characterizing GEO Titan IIIC Transtage Fragmentations Using Ground-Based and Telescopic Measurements

In a continued effort to better characterize the Geosynchronous Orbit (GEO) environment, NASA's Orbital Debris Program Office (ODPO) utilizes various ground-based optical assets to acquire photometric and spectral data of known debris associated with fragmentations in or near GEO. The Titan IIIC Transtage upper stage is known to have fragmented four times. Two of the four fragmentations were in GEO while a third Transtage fragmented in GEO transfer orbit. The forth fragmentation occurred in Low Earth Orbit. In order to better assess and characterize these fragmentations, the NASA ODPO acquired a Titan Transtage test and display article previously in the custody of the 309th Aerospace Maintenance and Regeneration Group (AMARG) in Tucson, Arizona. After initial inspections at AMARG demonstrated that the test article was of sufficient fidelity to be of interest, the test article was brought to JSC to continue material analysis and historical documentation of the Titan Transtage. The Transtage has been subject to two separate spectral measurement campaigns to characterize the reflectance spectroscopy of historical aerospace materials. These data have been incorporated into the NASA Spectral Database, the goal being to enable comparison with telescopic data and potential material identification. A LIDAR scan has been completed and a scale model has been created for use in the Optical Measurement Center for photometric analysis of an intact Transtage, including a BRDF. An historical overview of the Titan IIIC Transtage, the current analysis that has been done to date, and the future work to be completed in support of characterizing the GEO and near GEO orbital debris environment will be discussed in the subsequent presentation.

Cowardin, H.↗
NASA NTRSDate not supplied

Models, In situ, and Remote sensing of Aerosols (MIRA)

There is a natural partitioning of scientific interest amongst three specialties of aerosol research: modeling, in situ measurements, and remote sensing. The community sees enhanced measurement capabilities when these groups interact, and this strengthens the overall scientific impact on climate and air quality. The Models, In situ, and Remote sensing of Aerosols (MIRA) working group connects members of the different aerosol communities through collaborative projects. What is MIRA? MIRA is a forum that fosters international collaborations amongst the aerosol specialties. MIRA is also a collection of interdisciplinary projects with clear goals that are pursued by small working groups. Finally, MIRA projects are generally characterized by requests for additional scientific data (both observational and modeled). Why? The purpose of MIRA is to contextualize both observations and model results through the encouragement of holistic projects and collaborations. How does MIRA differ from other projects? MIRA focuses on interdisciplinarity to improve measurements and their utility, so MIRA complements the activities of other groups. For example, ensemble model runs of AeroCom could be used in a MIRA project with greater robustness than a similar effort that uses single-model analyses. We present a description of MIRA and brief descriptions of some of the current MIRA topics, which include Satellite-Assisted Particulate Matter (SAPM), Mapping of Aerosol lidar ratios for CALIPSO (MAC), Tables of Aerosol Optics (TAO), and the Harmonization of aerosol Assimilation Models and Retrievals (HAMR). Finally, we discuss the immediate science goals and organization of MIRA. See https://science.larc.nasa.gov/mira-wg/ for more information.

Travis Toth↗
DOE OSTI2017

Geothermal Play-Fairway Analysis of Washington State Prospects: Phase 2 Results

An investment of $0.7M from the Geothermal Technology Office for Phase 2 of Play Fairway Analysis in Washington State improved existing favorability models and increased model confidence. The new 1:24,000-scale geological mapping, 15 detailed geophysical surveys, 2 passive seismic surveys, and geochronology collected during this phase are coupled with updated and detailed structural modeling and have significantly improved the conceptual models of three potential blind geothermal systems/plays in Washington State: the St. Helens Shear Zone, Mount Baker, and Wind River Valley. Results of this analysis reveal the presence of commercially viable undiscovered geothermal resources in all three study areas. The analysis additionally provides a clear definition of the geothermal prospects in terms of the essential elements of a functioning geothermal system, the confidence in these assessments, and associated potential and risk of development. As a result, several groups have recently approached our organization about opportunities for large-capital moderate- to high-temperature geothermal development and are very interested in the results of Phase 3 drilling. Here, our updated models, coupled with development interest, provides a compelling basis for investment in future validation activities.

exploration risk↗
DOE OSTI2016

Dependability Assessment of Software for Safety Instrumentation and Control Systems

In its 2013 recommendations to the International Atomic Energy Agency (IAEA), the Technical Working Group on Nuclear Power Plant Instrumentation and Control (TWG-NPPIC) identified assessment and evaluation of software dependability as a topic of interest for IAEA Member States. To implement the recommendation of the TWG-NPPIC, the IAEA Scientific Secretary for the TWG initiated a consultancy activity in 2014 to develop a technical report describing a dependability assessment framework suitable for safety instrumentation and control (I and C) systems in nuclear power plants (NPPs). The development of the software dependability assessment report has involved three consultancy meetings at IAEA headquarters in Vienna, Austria. The conduct of these meetings allowed consultation among subject matter experts to generate consensus technical information that serves as the content of the report. The technical contributors consist of international experts from academia, industry, regulatory bodies and research organizations. In September 2014, a technical meeting was held in Daejeon, Republic of Korea, to present interim findings of the consultancy effort and to solicit input from representatives of IAEA Member States. The information and technical comments contributed during the technical meeting were addressed in subsequent development of the report. This paper gives an overview of key technical elements of the IAEA report. The IAEA report presents a framework by which a dependability assessment of safety software can be performed. The specified guiding principles provide the basis for establishing an assessment strategy and implementing the assessment process. The assessment framework provides a systematic, coherent structure within which to organize technical and process evidence to satisfy arguments in support of claims about software dependability properties. During the consultancy activity, the participating subject matter experts focused on high level principles, a structured approach, and identification of suitable methods and techniques. However, it was recognized that what remains is to concretize the framework through specific examples and usage experience. Thus, following publication of the report, it is recommended that case studies be performed to illustrate and more precisely define specific phases and elements of the assessment framework. For example, current national assessment approaches could be mapped into the assessment framework to serve as case studies and help to identify any aspects of the assessment framework that needs further definition or adjustment. Additionally, a challenge problem could be defined to engage stakeholders to apply the assessment framework with a common focus. This could help to better illustrate strategic options and approaches to the assessment phases. It also could serve to suggest other considerations and potential sources of evidence not fully covered in the report. Based on findings from case studies, challenge problems and country experience, it should be possible to develop generalized templates to support application of the assessment framework. These findings can be collected to serve as the basis for a User's Guide on dependability assessment of safety software. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Defect-induced states, defect-induced phase transition, and excitonic states in bent tungsten disulfide (WS 2 ) nanoribbons: Density functional vs. many body theory

Two-dimensional (2D) transition metal dichalcogenide (TMD) materials have versatile electronic and optical properties. TMD nanoribbons exhibit interesting properties due to reduced dimensionality, quantum confinement, and edge states, which make them suitable for various electronic and optoelectronic applications. In a previous work conducted by our group, we demonstrated that the edge bands evolved with bending can tune the optical properties for various widths of TMD nanoribbons. Defects are commonly present in 2D TMD materials, and can dramatically change the material properties. Here, in this following work, we investigate the interaction between the edge and the defect states in tungsten disulfide (WS 2 ) nanoribbons with lines of W- or S-atom vacancies defects under different bending conditions, using density functional theory (DFT). To gain understanding about the limits of density functional approximations, we compare results on band gaps and energies of defect states with quasiparticle GW. We reveal interesting semiconductor-metal phase transitions, suggesting potential applications in nanoelectronics or molecular electronics. We also calculate the optical absorption of the bent and defective nanoribbons with the many-body GW-BSE (Bethe-Salpeter equation) approach, revealing a tunable optical spectrum and diverse exciton states in the defective WS 2 nanoribbons.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Systematic Identification of Gene Families for Use as “Markers” for Phylogenetic and Phylogeny-Driven Ecological Studies of Bacteria and Archaea and Their Major Subgroups

With the astonishing rate that genomic and metagenomic sequence data sets are accumulating, there are many reasons to constrain the data analyses. One approach to such constrained analyses is to focus on select subsets of gene families that are particularly well suited for the tasks at hand. Such gene families have generally been referred to as “marker” genes. We are particularly interested in identifying and using such marker genes for phylogenetic and phylogeny-driven ecological studies of microbes and their communities (e.g., construction of species trees, phylogenetic based assignment of metagenomic sequence reads to taxonomic groups, phylogeny-based assessment of alpha- and beta-diversity of microbial communities from metagenomic data). We therefore refer to these as PhyEco (for phylogenetic and phylogenetic ecology) markers. The dual use of these PhyEco markers means that we needed to develop and apply a set of somewhat novel criteria for identification of the best candidates for such markers. The criteria we focused on included universality across the taxa of interest, ability to be used to produce robust phylogenetic trees that reflect as much as possible the evolution of the species from which the genes come, and low variation in copy number across taxa. We describe here an automated protocol for identifying potential PhyEco markers from a set of complete genome sequences. The protocol combines rapid searching, clustering and phylogenetic tree building algorithms to generate protein families that meet the criteria listed above. We report here the identification of PhyEco markers for different taxonomic levels including 40 for “all bacteria and archaea”, 114 for “all bacteria (greatly expanding on the ~30 commonly used), and 100 s to 1000 s for some of the individual phyla of bacteria. This new list of PhyEco markers should allow much more detailed automated phylogenetic and phylogenetic ecology analyses of these groups than possible previously.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Performance of a Drifting Acoustic Instrumentation SYstem (DAISY) for characterizing radiated noise from marine energy converters

Marine energy converters can generate electricity from energetic ocean waves and water currents. Because sound is extensively used by marine animals, the radiated noise from these systems is of regulatory interest. However, the energetic nature of these locations poses challenges for performing accurate passive acoustic measurements, particularly with stationary platforms. The Drifting Acoustic Instrumentation SYstem (DAISY) is a modular hydrophone recording system purpose-built for marine energy environments. Using a flow shield in currents and mass–spring–damper suspension system in waves, we demonstrate that DAISYs can effectively minimize the masking effect of flow noise at frequencies down to 10 Hz. In addition, we show that groups of DAISYs can utilize time-delay-of-arrival post-processing to attribute radiated noise to a specific source. Consequently, DAISYs can rapidly measure radiated noise at all frequencies of interest for prototype marine energy converters. Furthermore, the resulting information from future operational deployments should support regulatory decision-making and allow technology developers to make design adjustments that minimize the potential for acoustic impacts as their systems are scaled up for utility-scale power generation.

16 TIDAL AND WAVE POWER↗
DOE OSTI2025

Designing Cyclic Nitrogen‐Bridged Sulfonamides with Anti‐Cancer Activity

The N-bridgehead heterocyclic structure is an abundant motif in a multitude of natural products. This structural feature is of high interest because it is present in many different bioactive molecules, many of which are well-established pharmaceuticals. The introduction of a sulfone group into the N-bridgehead system yields a new core structure containing a N-bridgehead sulfonamide. While linear sulfonamides can be found in natural products, only artificial cyclic sulfonamides are known to date. Applications of related cyclic sulfonamide compounds include matrix metalloproteinase inhibitors, potential HIV and cancer therapeutics, and anti-inflammatory compounds. To explore the potential bioactivity of the N-bridgehead sulfonamide scaffold, a synthetic route toward these scaffolds is developed and their bioactivity is explored against different cancer cell lines.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Computational methods in unraveling the mechanism of metallaphotoredox catalysis

Moving from Guangzhou, China to Maryland, USA in 2017 to pursue a Ph.D. in chemistry was terrifying and exciting at the same time. However, it didn’t take me long to commit to working with a young assistant professor. As an undergraduate, I spent countless hours doing the “wet lab” research on green catalysis, where I developed a strong interest in organometallic catalysis and in using mechanistic-driven approach towards the rational design of novel catalytic systems. Not surprisingly, during the group rotation in my first semester in University of Maryland, the research focus and, in particular, the friendly group atmosphere led to my decision to join the research group of Dr. Osvaldo Gutierrez, who was just starting his 2nd year as an assistant professor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2011

Impact of Gender, Partner Status, and Race on Locoregional Failure and Overall Survival in Head and Neck Cancer Patients in Three Radiation Therapy Oncology Group Trials

Purpose: We investigated the impact of race, in conjunction with gender and partner status, on locoregional control (LRC) and overall survival (OS) in three head and neck trials conducted by the Radiation Therapy Oncology Group (RTOG). Methods and Materials: Patients from RTOG studies 9003, 9111, and 9703 were included. Patients were stratified by treatment arms. Covariates of interest were partner status (partnered vs. non-partnered), race (white vs. non-white), and sex (female vs. male). Chi-square testing demonstrated homogeneity across treatment arms. Hazards ratio (HR) was used to estimate time to event outcome. Unadjusted and adjusted HRs were calculated for all covariates with associated 95% confidence intervals (CIs) and p values. Results: A total of 1,736 patients were analyzed. Unpartnered males had inferior OS rates compared to partnered females (adjusted HR = 1.22, 95% CI, 1.09-1.36), partnered males (adjusted HR = 1.20, 95% CI, 1.09-1.28), and unpartnered females (adjusted HR = 1.20, 95% CI, 1.09-1.32). White females had superior OS compared with white males, non-white females, and non-white males. Non-white males had inferior OS compared to white males. Partnered whites had improved OS relative to partnered non-white, unpartnered white, and unpartnered non-white patients. Unpartnered males had inferior LRC compared to partnered males (adjusted HR = 1.26, 95% CI, 1.09-1.46) and unpartnered females (adjusted HR = 1.30, 95% CI, 1.05-1.62). White females had LRC superior to non-white males and females. White males had improved LRC compared to non-white males. Partnered whites had improved LRC compared to partnered and unpartnered non-white patients. Unpartnered whites had improved LRC compared to unpartnered non-whites. Conclusions: Race, gender, and partner status had impacts on both OS and locoregional failure, both singly and in combination.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2018

Solution Thermodynamics and Kinetics of Metal Complexation with a Hydroxypyridinone Chelator Designed for Thorium-227 Targeted Alpha Therapy

In this study, the solution chemistry of a chelator developed for 227 Th targeted alpha therapy was probed. The compound of interest is an octadentate ligand comprising four N-methyl-3-hydroxy-pyridine-2-one metal-binding units, two tertiary amine groups, and one carboxylate arm appended for bioconjugation. The seven pK a values of the ligand and the stability constants of complexes formed with Th(IV), Hf(IV), Zr(IV), Gd(III), Eu(III), Al(III), and Fe(III) were determined. The ligand exhibits extreme thermodynamic selectivity toward tetravalent metal ions with a ca. 20 orders of magnitude difference between the formation constant of the Th(IV) species formed at physiological pH, namely [ThL] - , and that of its Eu(III) analogue. Likewise, log β 110 values of 41.7 ± 0.3 and 26.9 ± 0.3 (T = 25 °C) were measured for [ThL] - and [Fe III L] 2- , respectively, highlighting the high affinity and selectivity of the ligand for Th ions over potentially competing endogenous metals. Single crystal X-ray analysis of the Fe(III) complex revealed a dinuclear 2:2 metal:chelator complex crystallizing in the space group P1 - . The formation of this dimeric species is likely favored by several intramolecular hydrogen bonds and the protonation state of the chelator in acidic media. L III edge EXAFS data on the Th(IV) complexes of both the ligand and a monoclonal antibody conjugate revealed the expected mononuclear 1:1 metal:chelator coordination environment. This was also confirmed by high resolution mass spectrometry. Lastly, kinetic experiments demonstrated that labeling the bioconjugated ligand with Th(IV) could be achieved and completed after 1 h at room temperature, reinforcing the high suitability of this chelator for 227 Th targeted alpha therapy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Draft genome sequences of strains CBS6241 and CBS6242 of the basidiomycetous yeast Filobasidium floriforme

The Tremellomycetes are a species-rich group within the basidiomycete fungi; however, most analyses of this group to date have focused on pathogenic Cryptococcus species within the order Tremellales. Recent genome-assisted studies of other Tremellomycetes have identified interesting features with respect to biotechnological applications as well as the evolution of genes involved in mating and sexual development. Here, we report genome sequences of two strains of Filobasidium floriforme, a species from the order Filobasidiales, which branches basally to the Tremellales, Trichosporonales, and Holtermanniales. The assembled genomes of strains CBS6241 and CBS6242 are 27.4 Mb and 26.4 Mb in size, respectively, with 8314 and 7695 predicted protein-coding genes. Overall sequence identity at nucleic acid level between the strains is 97%. Among the predicted genes are pheromone precursor and pheromone receptor genes as well as two genes encoding homedomain (HD) transcription factors, which are predicted to be part of the mating type (MAT) locus. Sequence analysis indicates that CBS6241 and CBS6242 carry different alleles for both the pheromone/receptor genes as well as the HD transcription factors. Orthology inference identified 1482 orthogroups exclusively found in F. floriforme, some of which were involved in carbohydrate transport and metabolism. Subsequent CAZyme repertoire characterization identified 267 and 247 enzymes for CBS6241 and CBS6242, respectively, the second highest number of CAZymes among the analyzed Tremellomycete species. In addition, F. floriforme contains five CAZymes absent in other species and several plant-cell-wall degrading CAZymes with the highest copy number in Tremellomycota, indicating the biotechnological potential of this species.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2017

Orientation-dependent properties of epitaxially strained perovskite oxide thin films: Insights from first-principles calculations

The structural properties, energetics, and polarizations of perovskite-based thin-film oxide systems are computed as a function of biaxial strain state and epitaxial orientation, employing an automated computational workflow based on density functional theory. In this work, a total of 14 compositions are considered, of the form ABO 3 , with A = Ba, K, Na, Pb, and Sr and B = Hf, Sn, Ti, Zr, Nb, Ta, and V site cations chosen to yield tolerance factors with values ranging between 0.95 and 1.1. Three biaxial strain states corresponding to epitaxial growth of (100)-, (110)-, and (111)-oriented films are considered, with misfit strains ranging between -4% to 4%. Results are presented for the series of perovskite-derived phases, and their corresponding symmetries, which are energetically favorable as a function of misfit strain, along with their corresponding equilibrium atomic positions, lattice parameters, and electric polarizations. The results demonstrate robust trends of in-plane polarization enhancement under tensile strain for all epitaxial orientations, and out-of-plane polarization enhancementwith compression for the (100)- and (110)-oriented films. Strains corresponding to the (111)-growth orientation lead to a wider variety of out-of-plane polarization behavior, with BaTiO 3 showing anomalous diminishing polarization with compression. Epitaxial orientation is shown to have a strong effect on the nature of strain-induced phase transitions, with (100)-oriented systems tending to have smooth, second-order transitions and (110)- and (111)-oriented systems more commonly exhibiting first-order transitions. The significance of this effect for device applications is discussed, and a number of systems are identified as potentially interesting for ferroelectric thin-film applications based on energetic stability and polarization behavior. Analysis of polarization behavior across different orientations reveals distinct groups into which compositions can be organized, some of which have polarization dependencies on misfit strain that have not been reported previously.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

TRIPOLI-4 neutronics calculations for IAEA-CRP benchmark of CEFR start-up tests using new libraries JEFF-3.3 and ENDF/B-VIII

Sodium-cooled Fast Reactors (SFR) are one of the promising Generation IV fast reactors. The China Experimental Fast Reactor (CEFR) is a 65 MWth pool-type SFR with a high neutron leakage core using high enriched uranium oxide fuel. The CEFR start-up tests in 2010 consist of series of neutronics experiments. Essential experimental data are available from the 2018 IAEA-CEFR-CRP benchmark document and useful for the validation of neutron transport codes and nuclear data libraries. The TRIPOLI-4 Monte Carlo transport code is a general-purpose neutronics code using continuous-energy nuclear data libraries. It has a rich validation database covering different computational and experimental benchmark data sets to assure the accuracy and credibility of numerical studies. Previous TRIPOLI-4 SFR core physics calculations used mainly MOX fuels. SFR control rod worth studies with TRIPOLI-4 were mainly on big-size cores. To test the modeling capability of TRIPOLI-4 on fuel loading patterns and on variable control rods positions for SFRs and to check recent nuclear data libraries, it is interesting to investigate the CEFR start-up tests in this work, including core states from subcritical to supercritical, control rods and rod group worth, point kinetics parameters, and radial foil activation measurements. TRIPOLI-4 calculation results using new data libraries JEFF-3.3, ENDF/B-VIII, and those of ENDF/B-VII.1 for different CEFR core states are reported here. By means of different options of TRIPOLI-4, control-rod SAs reactivity worth, point kinetics parameters, and radial {sup 237}Np(n,f) fission rate distribution were successfully evaluated. Both ENDF/B-VIII and JEFF-3.3 nuclear data libraries provided reliable results with a difference of 170 +/- 11 pcm in k{sub eff}.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

How To Manual - 4.56

The "how to" document is designed to help walk the analyst through difficult aspects of software usage. It should supplement both the User's manual and the Theory document, by providing examples and detailed discussion that reduce learning time for complex set ups. These documents are intended to be used together. We will not formally list all parameters for an input here — see the User's manual for this. All the examples in the "How To" document are part of the Sierra/SD test suite, and each will run with no modification. The nature of this document casts together a number of rather unrelated procedures. Grouping them is difficult. Please try to use the table of contents and the index as a guide in finding the analyses of interest.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Challenges for and Pathways Toward Solid-State Batteries

Solid-state batteries utilizing lithium metal anodes have the potential to enable batteries with a specific energy of >500 Wh/kg and an energy density of >1,500 Wh/L for thousands of cycles. When optimized they will improve the energy efficiency, operating temperature range, sustainability, and safety at a lower cost compared to projections for advanced Li-ion batteries. This improved performance is critical for the widespread adoption of electric vehicles and may enable future applications such as electric aviation. Expectations for solid-state batteries are high, there are significant materials and processing challenges that need to be overcome. Some of these challenges are well known; others are more subtle and are just becoming known. The challenges and their solutions must be clearly identified to realize high-energy solid-state Li metal batteries. In the United States, the U.S. Department of Energy (DOE) funds the majority of energy storage research and development, including solid state battery research. Web of Science publication analysis shows that worldwide DOE is second largest funder. Work on solid state batteries is distributed across different arms of DOE and is coordinated at headquarters to ensure a broad national portfolio for advanced batteries, including lithium batteries and solid-state battery devices. We note that university and national laboratory researchers in the US with a long-standing interest in solid state batteries is a small, integrated community with recognized impact for publications, patents and startup companies. The opportunity for this group to engage for research with international colleagues is growing, fostered by periodic bilateral meetings supported by DOE and by the recent joint US German research program for lithium battery interface studies. These are valuable opportunities to speed solid-state battery development. The ORNL led virtual workshop, overviewed here, confirms the community’s shared vision of the exciting advances, opportunities, and challenges. Further, we are seeing that this workshop has spawned several new informal collaborations and draft proposals. This encourages us to propose future discussion. On May 11, 2020, Oak Ridge National Laboratory (ORNL) hosted a 6-hour, on-line national workshop to discuss recent advances and most the prominent obstacles to realizing solid-state Li metal batteries. The workshop included more than 30+ experts from national laboratories, universities, and companies, all of whom have worked on solid-state batteries for multiple years. The participants shared recent advances, many not yet in print, illustrating that the community has gained significant new insights for solid-state Li battery materials over the last 5 years. In this report, the major outcomes of the workshop are organized to identify the gaps in our scientific knowledge for four core materials science areas: (1) Li metal anodes, (2) the solid electrolyte in contact with Li metal, (3) active cathode materials and solid-state composite cathodes, and (4) solid electrolytes. Illustrative examples and discussions are reported with the more comprehensive issues in the report. Discussion of additional challenges related to processing of solid-state battery materials and to the designs and architectures for mechanically robust, long-lived batteries received less attention due to time constraints. These are good themes for deeper discussion at a follow-on workshop, where a complete list of critical research topics can be identified.

25 ENERGY STORAGE↗
DOE OSTI2020

Collaborative Research and Development Program on Explosive Detection Technology

In September 2013, at the 6th Permanent Coordinating Group Meeting between the U.S Department of Energy (DOE) and the French Institut de Radioprotection et de Sureté Nucléaire (IRSN), France expressed an interest in bilateral cooperation with the United States because its newly revised regulations that require enhanced explosives detection capabilities at nuclear and radiological facilities. In the ensuing years, PNNL (DOE/NNSA) and IRSN sought to identify an area of collaboration within explosives detection that would leverage the specific technical strengths of each organization. Based upon awareness of each other’s technical acumen gleaned from the scientific literature on explosives detection, it was clear that specific organizations within each nation could provide the needed expertise to enable enhancement of explosives detection through a collaborative development effort. The French lnstitut Saint-Louis was determined to be an optimal partner for IRSN to develop a collaboration with DOE/NNSA using PNNL’s detection team in this effort. Thus, the dialog was started between the technical experts at each organization to define where complementary expertise in explosives detection could be best leveraged. The technical plans and objectives of this project were sound with promising results. In the end, the joint action sheet was not implemented. The challenge with executing the project was in the complexity of getting a signed agreement between DOE, IRSN and ISL. Most of the obstacles surrounded the ability to protect intellectual property and obtain an agreement which included all of the parties. At a high level, this report documents the interactions and attempt to develop a cooperative framework for explosives detection development from FY 2014 through FY 2020.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Sierra/SD-- How To Manual - 4.58

The “how to” document is designed to help walk the analyst through difficult aspects of software usage. It should supplement both the User’s manual and the Theory document, by providing examples and detailed discussion that reduce learning time for complex set ups. These documents are intended to be used together. We will not formally list all parameters for an input here – see the User’s manual for this. All the examples in the “How To” document are part of the Sierra/SD test suite, and each will run with no modification. The nature of this document casts together a number of rather unrelated procedures. Grouping them is difficult. Please try to use the table of contents and the index as a guide in finding the analyses of interest.

97 MATHEMATICS AND COMPUTING↗