Search NASA⌕ Search

SEARCH · Search NASA

Results for “ITERATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Solitary Waves of the MRLW Equation by Variational Iteration Method

In a recent publication, Soliman solved numerically the modified regularized long wave (MRLW) equation by using the variational iteration method (VIM). In this paper, corrected numerical results have been computed, plotted, tabulated, and compared with not only the exact analytical solutions but also the Adomian decomposition method results. Solitary wave solutions of the MRLW equation are exactly obtained as a convergent series with easily computable components. Propagation of single solitary wave, interaction of two and three waves, and also birth of solitons have been discussed. Three invariants of motion have been evaluated to determine the conservation properties of the problem.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Anomalous transport of energetic particles in ITER relevant scenarios

The anomalous transport of energetic ions in the presence of turbulent fields is investigated. Nonlinear simulations of a steady-state ITER [R. Aymar et al., Nucl. Fusion 41, 1301 (2001)] scenario have been carried out using the gyrokinetic turbulence code GENE[F. Jenko et al., Phys. Plasmas 7, 1904 (2000)], modeling the suprathermal particles as high temperature Maxwellian distributions in the passive tracer limit. Velocity space analysis shows that single particle diffusivities of ions above the critical energy are significantly larger than their neoclassical counterpart.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Present Status of the ITER-like ICRF Antenna on JET

The commissioning of the ITER-Like ICRF Antenna (ILA) on JET plasmas from May 2008 to April 2009 in various conditions (33, 42 and 47 MHz, L- and H-mode, antenna strap-plasma separatrix distances of {approx}9 to 17 cm) has provided relevant information for future antenna design and operation. The maximum power density achieved was 6.2 MW/m{sup 2} in L-mode with strap to plasma separatrix distance of {approx}9-10 cm at 42 MHz on the lower half of the ILA extrapolating to 8 MW/m{sup 2} if the full generator power had been available. Efficient (trip-free operation) ELM tolerance was obtained both at 33 and 42 MHz on a large range of ELMs with strap voltages up to 42 kV and a maximum power density of 4.1 MW/m{sup 2}. The paper reviews these achievements as well as remaining issues.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

RF Matching Feedback Control Systems on the JET ITER-Like Antenna

Ion Cyclotron Resonance Frequency (ICRF) antennas achieve maximum power transfer from RF generator to plasma load by establishing an impedance match. The JET ITER-Like Antenna (ILA) consists of 4 mutually coupled resonators that need to be matched simultaneously and whose resonant states need to be accurately controlled by several available actuators to couple maximum power and to achieve optimal ELM resilience. The operation of the matching system is described. Experimental operation revealed some phenomena and sensitivities that did not surface from simulation alone and that should be taken into account for the design of future ICRF antennae systems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulating the JET ITER-like Antenna circuit

A set of simulation/interpretation tools based on transmission line theory and on the RF model developed by M. Vrancken has been developed to study the ITER-like Antenna (ILA) at JET. For given tuning element settings, the unique solution of the equations governing the ILA circuit requires solving a system of coupled linear equations relating the voltages and currents at the antenna straps and other key locations. This computation allows cross-checking predicted values against measured experimental ones. Further more, a minimization procedure allows improving the correspondence with the quantities measured in the circuit during shots, thus coping with unavoidable errors arising from uncertainties in the measurements or from inaccuracies in the adopted RF model. Typical applications are e.g. fine-tuning of the second-stage of the ILA circuit for increased ELM-resilience, cross-checking the calibration of the measurements throughout the circuit and predicting the antenna performance and matching conditions in new plasma scenarios.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Operational Experience with the Scattering Matrix Arc Detection System on the JET ITER-Like Antenna

The Scattering Matrix Arc Detection System (SMAD) has been fully deployed on all 4 sets of Resonant Double Loop (RDL), Vacuum Transmission Line (VTL) and Antenna Pressurised Transmission Lines (APTL) of the JET ICRF ITER-Like Antenna (ILA) and this has been indispensable for operating at low (real) T-point impedance values to investigate ELM tolerance. This paper describes the necessity of the SMAD vs VSWR (Voltage Standing Wave Ratio) protection system, SMAD commissioning, problems and a number of typical events detected by the SMAD system during operation on plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterisation of the Sub-Harmonic Arc Detection System on JET ITER-Like Antenna

A Sub-Harmonic Arc Detection (SHAD) system has been installed on the transmission lines feeding the JET ICRF ITER-like-Antenna (ILA). Along with the commissioning of SHAD, extensive measurements of the RF field in the transmission lines were carried-out using fast sampling (125 Mb/s) oscilloscopes. The system is described, and the SHAD ability to detect arcs during ILA operation (in particular on ELMy H modes) is discussed. Overall, SHAD proved to be efficient, and in some conditions it can offer extra protection in complement to other arc detection systems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Status of the ITER IC H and CD System

The ITER Ion Cyclotron Heating and Current Drive system will deliver 20 MW of radio frequency power to the plasma in quasi continuous operation during the different phases of the experimental programme. The system also has to perform conditioning of the tokamak first wall at low power between main plasma discharges. This broad range of requirements imposes a high flexibility and a high availability. The paper highlights the physics and design requirements on the IC system, the main features of its subsystems, the predicted performance, and the current procurement and installation schedule.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Performance of the ITER ICRF Antenna plug as expected from TOPICA matrices

The performances of the present ICRF antenna plug design is evaluated by means of the TOPICA 24x24 matrix for plasma loading supplemented by 4-port junction (4PJ) matrices. For their interpretation these results are compared with a cruder modeling by the semi-analytical code ANTITER II. From this analysis we conclude: (1) The broadbanding effect of the service stub on the response of the 4PJ made for one triplet is maintained for the complete array for all the heating and current drive phasings. (2) For a given maximum voltage of the 8 feeding lines the radiated power capability is roughly constant in the entire frequency band. (3) The power capability of the array is significantly dependent on the distance of the antenna to the Last Closed Flux Surface, the density profile in the scrape-off layer (SOL) and on the toroidal and poloidal phasings. The dependence on phasing is stronger for wider SOL (4) For a not too optimistic plasma density profile (Sc2 shortl7) a power capability exceeding 20 MW is only obtained for the 00 {pi}{pi} heating toroidal phasing and for the co-current drive phasing in the upper part of the frequency band for a maximum voltage in the complete system of 45 kV. (5), On account of the plasma gyrotropy the quadrature poloidal phasing introduced by hybrid feeding must excite waves propagating upwards in the ITER configuration to obtain the best coupling, (6) The large power capability difference between opposite current drive phasings is attributed to the coupling between the toroidal and poloidal phasings induced by the poloidal steady magnetic field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electromagnetic Modelling of Dielectric Loads in front of an ICRH ITER Array using TOPICA and HFSS codes for comparison

The antenna scattering (S-matrix) or impedance matrix at location where the antenna is connected to the power system is of crucial importance to assess compliance with power handling requirements and to design the tuning-and-matching system. The electrical behaviour of an Ion Cyclotron Resonance Heating (ICRH) ITER antenna in front of an infinite isotropic load was assessed numerically using the HFSSR and TOPICA codes for comparison. The calculations were performed at 45 MHz, for various thicknesses of the vacuum layer, various relative permittivities {epsilon}' for dielectric medium without losses ({epsilon}'' = 0),{epsilon}' ranging from 81 to 1000 and for various conductive losses {epsilon}'' = {sigma}/{epsilon}{sub 0}{center_dot}{omega}, for electrolyte medium ({epsilon}' = 81),{epsilon}'' ranging from 0 to 1000. The numerical results obtained with TOPICA and HFSS codes show a good overall agreement in case of vacuum, dielectric and electrolyte mediums. The best absorption of the fast magneto-sonic (Alfven) waves into the loads (i.e. the minimum of the module of antenna input reflection coefficient S11) is obtained around {epsilon}' = 400 for dielectric medium and around {epsilon}'' = 400 for electrolyte case.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ITER ICRF Antenna Optimization and Broad-Banding Validation by use of a Reduced-Scale Mock-Up

The ITER ICRF antenna has been optimized by making use of numerical tools. Flexible reduced-scale mock-ups have been constructed in order to validate the results of the optimization. The different mock-ups and their purpose are briefly described. First measurements are given, including the confirmation of the broad-banding effect of the service stub. The comparison of the measurements with results of numerical simulations is the subject of a companion paper. The measurements and the response of the system in function of frequency are interpreted in the light of transmission line models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tests on a mock-up of the feedback controlled matching options of the ITER ICRH system

Automatic control of the matching of the ITER ICRH antenna array on a reference load is presently developed and tested for optimization on a low-powered scaled (1:5) mock-up. Resilience to fast load variations is obtained either by 4 Conjugate-T (CT) or 4 quadrature hybrid circuits, the latter being the reference option. The main results are (i) for the CT option: successful implementation of the simultaneous feedback control of 11 actuators for the matching of the 4 CT and for the control of the array toroidal phasing; (ii) for the hybrid option: the matching and the array current control via feedback control of the decouplers and double stub tuners. This system is being progressively implemented and the simultaneous control of matching and antenna current has already been successfully tested on half of the array for heating and current drive phasings.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Status of ITER ICH Matching System Design

Work on the design of the ITER ICH matching system is progressing. The design has been significantly improved. The system will deliver a total power of 20 MW for long-pulse (>3000 s) operation. The present matching system has hybrid combiner-splitter circuits for ELM resilience, active matching during a shot using a double-stub-tuner circuit, decouplers between the eight inputs to each antenna, water-cooled transmission lines and matching components in the unmatched section, and air-cooled transmission lines using turbulent cooling.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of the ITER ICRH Decoupling and Matching System

The reference ITER ICRH load resilient matching system uses four 3dB hybrid power splitters. It is proposed to use a 'double stub' tuner (DST) configuration for the matching on the reference load and a decoupling system placed between the antenna plug and the matching system to reduce the mutual coupling effects and also to actively control the array current spectrum while requesting the same forward power from all 4 power sources. The paper analyzes (i) the optimization of the matching layout e.g. by varying the distance between the stubs and by the use of two capacitors taking into account the role of the decouplers on the matching requirements; (ii) the practical realization of the decouplers and their insertion into the circuit; (iii) the requests in voltage and current capabilities in the different parts of the system. The paper presents solutions for saving space and to decrease the ratings of the components. The computations are done with the array loading simulated by the TOPICA matrix.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of LH Launcher Arrays (Like the ITER One) Using the TOPLHA Code

TOPLHA (Torino Polytechnic Lower Hybrid Antenna) code is an innovative tool for the 3D/1D simulation of Lower Hybrid (LH) antennas, i.e. accounting for realistic 3D waveguides geometry and for accurate 1D plasma models, and without restrictions on waveguide shape, including curvature. This tool provides a detailed performances prediction of any LH launcher, by computing the antenna scattering parameters, the current distribution, electric field maps and power spectra for any user-specified waveguide excitation. In addition, a fully parallelized and multi-cavity version of TOPLHA permits the analysis of large and complex waveguide arrays in a reasonable simulation time. A detailed analysis of the performances of the proposed ITER LH antenna geometry has been carried out, underlining the strong dependence of the antenna input parameters with respect to plasma conditions. A preliminary optimization of the antenna dimensions has also been accomplished. Electric current distribution on conductors, electric field distribution at the interface with plasma, and power spectra have been calculated as well. The analysis shows the strong capabilities of the TOPLHA code as a predictive tool and its usefulness to LH launcher arrays detailed design.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ICRF Review: From ERASMUS To ITER

This is a personal account of how I saw ICRF evolve since 1974, with a presentation that is ordered according to the topics: heating, antenna coupling, impurity generation/mitigation and system technology. The nature of the main issues is each time reviewed, recent findings are incorporated, and it is shown how the ICRF community has been able to react to sometimes rapidly changing demands and is indeed resolutely preparing ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurement of RF Mode Purity in EC Transmission Test Line for ITER

The transmission mode purity was measured at the ITER relevant transmission line for 170 GHz ECH and CD system. The measured purity of HE{sub 11} in transmission power was 73% and the other was higher order modes. The dominant higher order mode was LP{sub 11} mode (HE{sub 21}+TE{sub 01}). To improve the mode purity, the RF beam coupling in MOU was aligned because LP{sub 11} mode is generated the offset and the tilt angle of RF beam at the waveguide inlet. After the alignment, HE{sub 11} mode purity was increased to 87%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Resent Status of ITER Equatorial Launcher Development

The ITER equatorial launcher is divided into a front shield and a port plug. The front shield is composed of fourteen blanket shield modules so as to form three openings for the injection of mm-wave beams into plasma. Twenty-four waveguide transmission lines, internal shields, cooling pipes and so on are installed in the port plug. The transmission lines consist of the corrugated waveguides, miter bends and the free space propagation region utilizing two mirrors in front of the waveguide outlet. The analysis of mm-wave beam propagation in the region shows that the transmission efficiency more than 99.5% is attained. The high power experiments of the launcher mock-up have been carried out and the measured field patterns at each mirror and the outlet of the launcher are agreed with the calculations. It is concluded that the transmission line components in the launcher mock-up are fabricated as designed and the present mm-wave design in the launcher is feasible.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗