Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNET SYSTEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Measurements of field-aligned currents in a multiple auroral arc system

A rocket-borne experiment to study the currents associated with a system of multiple auroral arcs was conducted at Poker Flat, Alaska, at 1122 UT on Feb. 2, 1972. The magnetic field in the vicinity of the auroral system was measured with a cesium vector magnetometer. Possible configurations were inferred by constructing model current systems that reproduced the magnetic field variations measured along the flight path. The data are interpreted in terms of a model current system consisting of two eastward electrojets and one westward electrojet and three pairs of oppositely directed Birkeland sheet currents, all lying in a plane approximately parallel to the auroral arcs. Sheet thicknesses ranged from 20 to 60 km and current densities from 10 to 45 microampere/sq m; the electrojet currents ranged from 1000 to 2000 A. A possible alternate model consisted of four pairs of sheets whose thicknesses range from 10 to 40 km with current densities from 10 to 90 microampere/sq m. There was quite good agreement between the locations of the visual arcs and the upward current sheets. The overall current configuration is discussed in view of the theoretical models constructed by Atkinson and Sato and Holzer and of other observations.

Sesiano, J.↗

Integration of magnetic bearings in the design of advanced gas turbine engines

Active magnetic bearings provide revolutionary advantages for gas turbine engine rotor support. These advantages include tremendously improved vibration and stability characteristics, reduced power loss, improved reliability, fault-tolerance, and greatly extended bearing service life. The marriage of these advantages with innovative structural network design and advanced materials utilization will permit major increases in thrust to weight performance and structural efficiency for future gas turbine engines. However, obtaining the maximum payoff requires two key ingredients. The first key ingredient is the use of modern magnetic bearing technologies such as innovative digital control techniques, high-density power electronics, high-density magnetic actuators, fault-tolerant system architecture, and electronic (sensorless) position estimation. This paper describes these technologies. The second key ingredient is to go beyond the simple replacement of rolling element bearings with magnetic bearings by incorporating magnetic bearings as an integral part of the overall engine design. This is analogous to the proper approach to designing with composites, whereby the designer tailors the geometry and load carrying function of the structural system or component for the composite instead of simply substituting composites in a design originally intended for metal material. This paper describes methodologies for the design integration of magnetic bearings in gas turbine engines.

Storace, Albert F.↗

Overview of a flywheel stack energy storage system

The concept of storing electrical energy in rotating flywheels provides an attractive substitute to batteries. To realize these advantages the critical technologies of rotor design, composite materials, magnetic suspension, and high efficiency motor/generators are reviewed in this paper. The magnetically suspended flywheel energy storage system, currently under development at the University of Maryland, consisting of a family of interference assembled rings, is presented as an integrated solution for energy storage.

Kirk, James A.↗

A low temperature gravitational radiation detector

The beginning design of an experiment is discussed for studying gravitational radiation by using massive detectors which are cooled to ultralow temperatures in order to improve the signal to noise ratios and the effective range and stability of the detectors. The gravitational detector, a low detection system, a cooled detector, magnetic support, superconducting shielding, and superconducting accelerometer detector are described.

Hamilton, W. O.↗

Design study for a high reliability five-year spacecraft tape transport

Following the establishment of the overall transport concept, a study of all of the life limiting constraints associated with the transport were analyzed using modeling techniques. These design techniques included: (1) a response analysis from which the performance of the transport could be determined under operating conditions for a variety of conceptual variations both in a new and aged condition; (2) an analysis of a double cone guidance technique which yielded an optimum design for maximum guidance with minimum tape degradation; (3) an analysis of the tape pack design to eliminate spoking caused by negative tangential stress within the pack; (4) an evaluation of the stress levels experienced by the magnetic tape throughout the system; (5) a general review of the bearing and lubrication technology as applied to satellite recorders and hence the recommendation for using standard load carrying antifriction ball bearings; and (6) a kinetic analysis to determine the change in kinetic properties of the transport during operation.

Benn, G. S. L.↗

Solid-state controller

Attitude controllers are used to guide roll, pitch, and yaw of vehicle in flight. Controllers enclose multitude of switches, gears, cams, and other hardware needed to transmit pilot's commands to attitude control systems. New design, using magnetic coupled transducers, eliminates many mechanical parts, improving reliability and reducing maintenance.

Bailey, C. L.↗

Determining distance to lightning strokes from a single station

Apparatus is described for determining the distance to lightning strokes from a single station. The apparatus includes a first loop antenna system for sensing the magnetic field produced by the lightning which is filtered, square rooted, and fed into a peak voltage holding circuit. A second antenna is provided for sensing the electric field produced by the lightning which is fed into a filter, an absolute value meter, and to a peak voltage holding circuit. A multivibrator gates the magnetic and electric signals through the peak holding circuits to a ratio meter which produces a signal corresponding to the ratio between the magnetic component and the electric component. The amplitude of this signal is proportional to the distance from the apparatus to the lightning stroke.

Ruhnke, L. H.↗

Changes in the fibrinogen-fibrin system following a 20-hour exposure of rabbits to a magnetic field

Prolonged exposure of animals to a constant magnetic field resulted in a sharp increase in the amount of fibrinogen. The addition of EACA to the plasma of experimental rabbits as well as protamine sulfate caused an additional increase in the amount of fibrinogen. A 20-hour exposure was accompanied by phenomena of paralysis of the pelvic limbs and death of some of the animals.

Matskevichene, V. B.↗

High energy gamma ray results from the second small astronomy satellite

A high energy (35 MeV) gamma ray telescope employing a thirty-two level magnetic core spark chamber system was flown on SAS 2. The high energy galactic gamma radiation is observed to dominate over the general diffuse radiation along the entire galactic plane, and when examined in detail, the longitudinal and latitudinal distribution seem generally correlated with galactic structural features, particularly with arm segments. The general high energy gamma radiation from the galactic plane, explained on the basis of its angular distribution and magnitude, probably results primarily from cosmic ray interactions with interstellar matter.

Fichtel, C. E.↗

Research on materials for advanced electronic and aerospace application

Development and understanding of materials most suitable for use in compact magnetic and optical memory systems are discussed. Suppression of metal deterioration by hydrogen is studied. Improvement of mechanical properties of polymers is considered, emphasizing low temperature ductility and compatibility with high modulus fiber materials.

Source record↗

Nonlinear analysis and performance evaluation of the Annular Suspension and Pointing System (ASPS)

The Annular Suspension and Pointing System (ASPS) can provide high accurate fine pointing for a variety of solar-, stellar-, and Earth-viewing scientific instruments during space shuttle orbital missions. In this report, a detailed nonlinear mathematical model is developed for the ASPS/Space Shuttle system. The equations are augmented with nonlinear models of components such as magnetic actuators and gimbal torquers. Control systems and payload attitude state estimators are designed in order to obtain satisfactory pointing performance, and statistical pointing performance is predicted in the presence of measurement noise and disturbances.

Joshi, S. M.↗

On the relationship of the polar cap current system to the north-south component of the interplanetary magnetic field

The daily magnetic variation at the Resolute Bay polar cap station is examined for its dependence on the N-S component Bz of the IMF. The magnetic variations are found to be approximately in the same direction in the nightside polar cap for both northward and southward IMF, the amplitudes of the perturbations being larger for southward IMF. In the dayside, significant differences between the northward and southward IMF cases are observed. It is suggested that the overall pattern consists of two standard two-cell current patterns placed in juxtaposition such that the interface between them is the site of the antisunward current (sunward convection). Within the centers of each of these two patterns the currents are sunward (convection is antisunward).

Horwitz, J. L.↗

A new concept for the daytime magnetosphere of Venus

A different type of interaction between the solar wind and the ionosphere of a non-magnetized planet suggested by the Pioneer Venus magnetic field measurements is presented. They found that the magnetic field of the shocked solar wind does not penetrate the ionosphere, and it appears that the latter acts approximately as a superconductor, excluding any substantial penetration of interplanetary magnetic field. Just beyond the ionopause is a magnetized region with little plasma whose magnetic pressure is approximately equal to the impact pressure of the solar wind. This suggests an interaction where the current system associated with the enhanced magnetic field region flows along the ionopause and is closed by currents in the shocked solar wind plasma, where the J times B forces slow down the plasma approaching the stagnation region and accelerate the plasma flowing away from it. Thus, the lack of magnetic constraint in the ionosphere would allow ionospheric plasma to flow freely from the day to the night side, and this flow could probably maintain the nighttime ionosphere.

Johnson, F. S.↗

Further laboratory measurements of the beam-plasma discharge

The paper presents laboratory measurements of the beam-plasma discharge (BPD) produced when an energetic electron beam traverses an initially neutral gas. The results show that the critical beam current is related to energy, magnetic field, and the system length by an empirical relationship at pressures below 2 times 10 to the -5th power torr. This relationship describes the accumulation of ambient plasma density collisionally produced by the beam to a critical value at which ignition occurs. Additional measurements of the narrow-band cyclotron-related waves observed at beam currents below BPD threshold do not clearly establish whether this instability is a precursor to the BPD.

Bernstein, W.↗