Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETORESISTANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Geometric tuning of charge and spin correlations in manganite superlattices

We report a modulation of the in-plane magnetotransport in artificial manganite superlattice [(NdMnO{sub 3}){sub n}/(SrMnO{sub 3}){sub n}/(LaMnO{sub 3}){sub n}]{sub m} by varying the layer thickness n while keeping the total thickness of the structure constant. Charge transport in these heterostructures is confined to the interfaces and occurs via variable range hopping. Upon increasing n, the interfacial separation rises, leading to a suppression of the electrostatic screening between carriers of neighboring interfaces and the opening of a Coulomb gap at the Fermi level (E{sub F}). The high-field magnetoresistance (MR) is universally negative due to progressive spin alignment. However, at a critical thickness of n = 5 unit cells (u.c.), an exchange field coupling between ferromagnetically ordered interfaces results in positive MR at low magnetic field (H). Our results demonstrate the ability to geometrically tune the electrical transport between regimes dominated by either charge or spin correlations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetotransport properties of spin-valve structures with Mg spacer layers

A theoretical prediction by Wang et al. [Phys. Rev. B 82, 054405 (2010)] suggests the preferential transmission of majority-spin states with Δ{sub 1} symmetry across a magnesium interlayer in Fe/Mg/MgO/Fe based magnetic tunnel junctions. Here, we report experiments to probe this question in CoFe/Mg/CoFe structures. We find that the strength of the interlayer coupling decays exponentially with increasing the spacer thickness, however, a non-monotonic variation of the magnetoresistance as a function of the Mg layer is observed. These data may help revisit the role of the insertion of a Mg interface layer in MgO-based devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A comprehensive study of the magnetic, structural, and transport properties of the III-V ferromagnetic semiconductor InMnP

The manganese induced magnetic, electrical, and structural modification in InMnP epilayers, prepared by Mn ion implantation and pulsed laser annealing, are investigated in the following work. All samples exhibit clear hysteresis loops and strong spin polarization at the Fermi level. The degree of magnetization, the Curie temperature, and the spin polarization depend on the Mn concentration. The bright-field transmission electron micrographs show that InP samples become almost amorphous after Mn implantation but recrystallize after pulsed laser annealing. We did not observe an insulator-metal transition in InMnP up to a Mn concentration of 5 at. %. Instead all InMnP samples show insulating characteristics up to the lowest measured temperature. Magnetoresistance results obtained at low temperatures support the hopping conduction mechanism in InMnP. We find that the Mn impurity band remains detached from the valence band in InMnP up to 5 at. % Mn doping. Our findings indicate that the local environment of Mn ions in InP is similar to GaMnAs, GaMnP, and InMnAs; however, the electrical properties of these Mn implanted III-V compounds are different. This is one of the consequences of the different Mn binding energy in these compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Highly orientated growth and characterization of La{sub 0.7}Sr{sub 0.3}MnO{sub 3} thin films with different orientations on SrTiO{sub 3} substrates by chemical solution deposition method

La{sub 0.7}Sr{sub 0.3}MnO{sub 3} (LSMO) thin films were successfully prepared on (100), (110), and (111) oriented SrTiO{sub 3} substrates by chemical solution deposition method. The structural, magnetic, and magnetotransport properties were systematically studied. X-ray diffraction θ-2θ and ϕ-scan measurements results show that all the films have perfect crystalline orientation and in-plane alignment. Both the Curie temperature and metal-insulator transition temperature are almost the same for all the three orientations, about 339 K. The magnetoresistance value (MR value, defined as (R{sub M} − R{sub 0})/R{sub 0} × 100%, where R{sub M} and R{sub 0} are the resistivity with and without applied magnetic field) for the films reaches maximum near the Curie temperature. Both the magnetization and MR value for (100) direction LSMO are the largest, and meanwhile for (111) direction are the smallest. The saturation magnetization decreases approximately proportional to T{sup 2} at low temperature (T < T{sub c}/2) for all the oriented film. Inversely, the resistivity increases proportional to T{sup 2} in the same temperature range, which can be attributed to the electron-electron scattering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of growth conditions on exchange bias of NiMn-based spin valves

As shown in previous investigations, a correlation between a NiMn-based spin valve's thermal stability and its inherent exchange bias exists, even if the blocking temperature of the antiferromagnet is clearly above the heating temperature and the reason for thermal degradation is mainly diffusion and not the loss of exchange bias. Samples with high exchange bias are thermally more stable than samples with low exchange bias. Those structures promoting a high exchange bias are seemingly the same suppressing thermally induced diffusion processes (A. Wienecke and L. Rissing, “Relationship between thermal stability and layer-stack/structure of NiMn-based GMR systems,” in IEEE Transaction on Magnetic Conference (EMSA 2014)). Many investigations were carried out on the influence of the sputtering parameters as well as the layer thickness on the magnetoresistive effect. The influence of these parameters on the exchange bias and the sample's thermal stability, respectively, was hardly taken into account. The investigation described here concentrates on the last named issue. The focus lies on the influence of the sputtering parameters and layer thickness of the “starting layers” in the stack and the layers forming the (synthetic) antiferromagnet. This paper includes a guideline for the evaluated sputtering conditions and layer thicknesses to realize a high exchange bias and presumably good thermal stability for NiMn-based spin valves with a synthetic antiferromagnet.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Correlation between amplitude of spin accumulation signals investigated by Hanle effect measurement and effective junction barrier height in CoFe/MgO/n{sup +}-Si junctions

Correlation between the amplitude of the spin accumulation signals and the effective barrier height estimated from the slope of the log (RA) - t{sub MgO} plot (RA: resistance area product, t{sub MgO}: thickness of MgO tunnel barrier) in CoFe/MgO/n{sup +}-Si junctions was investigated. The amplitude of spin accumulation signals increases with increasing effective barrier heights. This increase of the amplitude of spin accumulation is originated from the increase of the spin polarization (P{sub Si}) in Si. The estimated absolute values of P{sub Si} using three-terminal Hanle signals are consistent with those estimated by four-terminal nonlocal-magnetoresistance (MR) and two-terminal local-MR. To demonstrate large spin accumulation in Si bulk band and enhance the local-MR through Si channel, these results indicate that the increase of the effective barrier height at ferromagnet/(tunnel barrier)/n{sup +}-Si junction electrode is important.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth-induced electron mobility enhancement at the LaAlO{sub 3}/SrTiO{sub 3} interface

We have studied the electronic properties of the 2D electron liquid present at the LaAlO{sub 3}/SrTiO{sub 3} interface in series of samples prepared at different growth temperatures. We observe that interfaces fabricated at 650 °C exhibit the highest low temperature mobility (≈10 000 cm{sup 2} V{sup −1} s{sup −1}) and the lowest sheet carrier density (≈5×10{sup 12} cm{sup −2}). These samples show metallic behavior and Shubnikov-de Haas oscillations in their magnetoresistance. Samples grown at higher temperatures (800–900 °C) display carrier densities in the range of ≈2−5×10{sup 13} cm{sup −2} and mobilities of ≈1000 cm{sup 2} V{sup −1} s{sup −1} at 4 K. Reducing their carrier density by field effect to 8×10{sup 12} cm{sup −2} lowers their mobilities to ≈50 cm{sup 2} V{sup −1} s{sup −1} bringing the conductance to the weak-localization regime.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetotransport phenomena in Bi{sub 2}Se{sub 3} thin film topological insulators grown by hybrid physical chemical vapor deposition

Intrinsic defects in Bi{sub 2}Se{sub 3} topological insulators tend to produce a high carrier concentration and current leakage through the bulk material. Bi{sub 2}Se{sub 3} thin films were grown by hybrid physical chemical vapor deposition on (0001) Al{sub 2}O{sub 3} substrates with high Se vapor pressure to reduce the occurrence of Se vacancies as the main type of defect. Consequently, the carrier concentration was reduced to ∼5.75 × 10{sup 18} cm{sup −3} comparable to reported carrier concentration in Bi{sub 2}Se{sub 3} thin films. Magnetotransport measurements were performed on the films and the data were analyzed for weak anti-localization using the Hikami-Larkin-Nagaoka model. The estimated α and l{sub ϕ} values showed good agreement with the symplectic case of 2-D transport of topological surface states in the quantum diffusion regime. The temperature and angular dependence of magnetoresistance indicate a large contribution of the 2-D surface carriers to overall transport properties of Bi{sub 2}Se{sub 3} thin film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Topological insulator thin films starting from the amorphous phase-Bi{sub 2}Se{sub 3} as example

We present a new method to obtain topological insulator Bi{sub 2}Se{sub 3} thin films with a centimeter large lateral length. To produce amorphous Bi{sub 2}Se{sub 3} thin films, we have used a sequential flash-evaporation method at room temperature. Transmission electron microscopy has been used to verify that the prepared samples are in a pure amorphous state. During annealing, the samples transform into the rhombohedral Bi{sub 2}Se{sub 3} crystalline structure which was confirmed using X-ray diffraction and Raman spectroscopy. Resistance measurements of the amorphous films show the expected Mott variable range hopping conduction process with a high specific resistance compared to the one obtained in the crystalline phase (metallic behavior). We have measured the magnetoresistance and the Hall effect at different temperatures between 2 K and 275 K. At temperatures T ≲ 50 K and fields B ≲ 1 T, we observe weak anti-localization in the MR; the Hall measurements confirm the n-type character of the samples. All experimental results of our films are in quantitative agreement with results from samples prepared using more sophisticated methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bulk crystal growth and electronic characterization of the 3D Dirac semimetal Na{sub 3}Bi

High quality hexagon plate-like Na{sub 3}Bi crystals with large (001) plane surfaces were grown from a molten Na flux. The freshly cleaved crystals were analyzed by low temperature scanning tunneling microscopy and angle-resolved photoemission spectroscopy, allowing for the characterization of the three-dimensional (3D) Dirac semimetal (TDS) behavior and the observation of the topological surface states. Landau levels were observed, and the energy-momentum relations exhibited a linear dispersion relationship, characteristic of the 3D TDS nature of Na{sub 3}Bi. In transport measurements on Na{sub 3}Bi crystals, the linear magnetoresistance and Shubnikov-de Haas quantum oscillations are observed for the first time.

36 MATERIALS SCIENCE↗

Magneto-dielectric coupling and transport properties of the ferromagnetic-BaTiO{sub 3} composites

Ferromagnetic and large magnetoresistance (MR) nanocomposites of La{sub 0.67}Sr{sub 0.33}MnO{sub 3}-BaTiO{sub 3} (LSMO-BTO) are synthesized via sol-gel route. The X-ray diffraction confirms the existence of two chemically separated phases in the composites. The maximum MR (35%) was achieved in LSMO-5% BTO (LB5). The coupling between the coexisting phases is observed from the dielectric anomaly at the ferromagnetic transition (T{sub c} = 353 K) for LB5 composition. We observed maximum magnetodielectric effect at T{sub c} of 1.18% in magnitude for LB5 and the effect of magnetic field on other composites was significant. These results are related to the large spin polarization within grains as well as at the grain boundaries and the evidence of variation in dielectric parameters with magnetic field reveal the magnetoelectric coupling in LSMO-BTO nanocomposites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magneto-transport anisotropy in epitaxially grown hybrid MnAs/GaAs multilayer

Using molecular-beam epitaxy, we grew a MnAs/GaAs multilayer on a GaAs(100) substrate and compared its magneto-transport characteristics to those of a single-layer MnAs thin film. The crystal orientation of the MnAs layers in both samples was type-B. M–H measurements revealed two-fold symmetric magnetic anisotropy on the surface with the easy and hard direction of magnetization. When the current flowed along the hard direction, the MnAs/GaAs multilayer exhibited negative magnetoresistance below Curie temperature; when the current flowed along the easy direction, it turned positive. We suggest that this peculiar anisotropic magneto-transport behavior in the multilayer originated from two-dimensional carrier confinement and spin-orbit coupling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Proposal for a graphene-based all-spin logic gate

In this work, we present a graphene-based all-spin logic gate (G-ASLG) that integrates the functionalities of perpendicular anisotropy magnetic tunnel junctions (p-MTJs) with spin transport in graphene-channel. It provides an ideal integration of logic and memory. The input and output states are defined as the relative magnetization between free layer and fixed layer of p-MTJs. They can be probed by the tunnel magnetoresistance and controlled by spin transfer torque effect. Using lateral non-local spin valve, the spin information is transmitted by the spin-current interaction through graphene channels. By using a physics-based spin current compact model, the operation of G-ASLG is demonstrated and its performance is analyzed. It allows us to evaluate the influence of parameters, such as spin injection efficiency, spin diffusion length, contact area, the device length, and their interdependence, and to optimize the energy and dynamic performance. Compared to other beyond-CMOS solutions, longer spin information transport length (∼μm), higher data throughput, faster computing speed (∼ns), and lower power consumption (∼μA) can be expected from the G-ASLG.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Heavy fermion Ce{sub 3}Co{sub 4}Sn{sub 13} compound under pressure

The non-magnetic heavy fermion compound Ce{sub 3}Co{sub 4}Sn{sub 13} was studied under pressure. We report single crystalline measurements of electrical resistivity as a function of temperature ρ(T) under pressure. Some characteristic features related to a structural transition (T{sub S}), crystalline field effects (T{sub CEF}), and a low temperature maximum (T{sub max}), possibly connected simultaneously to the onset of Kondo lattice coherence and short range magnetic correlations, were identified in the ρ(T) data. A pressure-temperature phase diagram with T{sub S} and T{sub max} was constructed by mapping these features. Like for most Ce-based heavy fermion compounds, T{sub max} moves to higher temperatures with pressure, indicating that it is related to the Kondo energy scale, due to the increase of hybridization induced by pressure. On the other hand, T{sub S}, associated to a superlattice distortion and probably combined with a charge density wave transition, decreases as a function of pressure. However, differently from the Sr{sub 3−x}Ca{sub x}Ir{sub 4}Sn{sub 13} system, where a superlattice quantum phase transition is observed [L. E. Klintberg et al., Phys. Rev. Lett. 109, 237 008 (2012)], in Ce{sub 3}Co{sub 4}Sn{sub 13} T{sub S} ∼ 154 K, at ambient pressure (P = 0), seems to stabilize at around 143 K for P ≥ 19 kilobars. We also investigated ρ(T) in external magnetic fields, at P = 0. Negative magnetoresistance and increase of T{sub max} are observed, suggesting suppression of low temperature short range magnetic correlations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Heterojunction metal-oxide-metal Au-Fe{sub 3}O{sub 4}-Au single nanowire device for spintronics

In this report, we present the synthesis of heterojunction magnetite nanowires in alumina template and describe magnetic and electrical properties from a single nanowire device for spintronics applications. Heterojunction Au-Fe-Au nanowire arrays were electrodeposited in porous aluminum oxide templates, and an extensive and controlled heat treatment process converted Fe segment to nanocrystalline cubic magnetite phase with well-defined Au-Fe{sub 3}O{sub 4} interfaces as confirmed by the transmission electron microscopy. Magnetic measurements revealed Verwey transition shoulder around 120 K and a room temperature coercive field of 90 Oe. Current–voltage (I-V) characteristics of a single Au-Fe{sub 3}O{sub 4}-Au nanowire have exhibited Ohmic behavior. Anomalous positive magnetoresistance of about 0.5% is observed on a single nanowire, which is attributed to the high spin polarization in nanowire device with pure Fe{sub 3}O{sub 4} phase and nanocontact barrier. This work demonstrates the ability to preserve the pristine Fe{sub 3}O{sub 4} and well defined electrode contact metal (Au)–magnetite interface, which helps in attaining high spin polarized current.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Induced spin polarization effect in graphene by ferromagnetic nanocontact

Chemically synthesized graphene contains large number of defects which act as localized spin moments at the defect sites. Cobalt nanosheets of variable thickness are grown on graphene surface to investigate spin/magnetotransport through graphene sheets containing large number of localized spins. Negative magnetoresistance (MR) is observed over the entire temperature range (5–300 K) for thin cobalt sheets, while a cross-over from negative to positive MR with increasing temperature is noticed for thicker cobalt sheets. The observed MR results are explained on the basis of recently reported spin polarization effect in graphene due to the presence of ferromagnetic atoms on the surface considering a spin valve like Co/graphene/Co nanostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic bead detection using domain wall-based nanosensor

We investigate the effect of a single magnetic bead (MB) on the domain wall (DW) pinning/depinning fields of a DW trapped at the corner of an L-shaped magnetic nanodevice. DW propagation across the device is investigated using magnetoresistance measurements. DW pinning/depinning fields are characterized in as-prepared devices and after placement of a 1 μm-sized MB (Dynabeads{sup ®} MyOne{sup ™}) at the corner. The effect of the MB on the DW dynamics is seen as an increase in the depinning field for specific orientations of the device with respect to the external magnetic field. The shift of the depinning field, ΔB{sub dep} = 4.5–27.0 mT, is highly stable and reproducible, being significantly above the stochastic deviation which is about 0.5 mT. The shift in the deppinning field is inversely proportional to the device width and larger for small negative angles between the device and the external magnetic field. Thus, we demonstrate that DW-based devices can be successfully used for detection of single micron size MB.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Zero-field spin torque oscillation in Co{sub 2}(Fe, Mn)Si with a point contact geometry

We show spin torque oscillation at zero external magnetic field using a point-contact giant magnetoresistance device with a highly spin-polarized Co{sub 2}Fe{sub 0.4}Mn{sub 0.6}Si (CFMS) Heusler alloy. The device emitted a high rf power (P{sub rf}) signal with a narrow spectral linewidth of 3 MHz without external magnetic field. Depending on the applied current, mode changes were clearly observed, and a large P{sub rf} of 25.7 nW was achieved. The large P{sub rf} and the high coherency of oscillation are attributable to the combination of the high spin-polarization of CFMS and the advantages of point-contact geometry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗