Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Alloying and oxidation of in situ produced core-shell Al@Yb nanoalloy particles—An “on-the-fly” study

Core-shell-structured nanoalloy particles with an Al-dominated interior covered by few Yb monolayers have been fabricated using a vapor-aggregation method involving magnetron sputtering. The radially segregated structure of the Yb-Al nanoparticles has been disclosed by “on-the-fly” photoelectron spectroscopy monitoring of the nanoparticle beam in Yb 4f and Al 2p electron binding energy regions. Both, the binding energy values and the electron microscopy images taken on the deposited nanoparticles, allow estimating their dimensions to be in the 5–10 nm range. The photoelectron spectroscopy results suggest that in these nanoparticles no trivalent Yb – the typical case for the macroscopic Yb-Al alloy – is present. The oxidation of preformed Yb-Al nanoparticles was successfully attempted, leading to the appearance of divalent Yb surface oxide – in contrast to the bulk macroscopic Yb which is trivalent in the oxide. Our results suggest that at intermediate oxygen exposures “sandwich-like” nanoparticles of YbO/Yb/Al were synthesized. At higher O{sub 2} exposures, the oxygen seems to penetrate all the way to the Yb-Al interface. The results of the present study have to be considered when photonic applications of Yb-doped garnet nanoparticles are planned.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of oxygen partial pressure, deposition temperature, and annealing on the optical response of CdS:O thin films as studied by spectroscopic ellipsometry

Ex-situ spectroscopic ellipsometry measurements are made on radio frequency magnetron sputtered oxygenated cadmium sulfide (CdS:O) thin films. Films are deposited onto glass substrates at room temperature and at 270 °C with varying oxygen to total gas flow ratios in the sputtering ambient. Ellipsometric spectra from 0.74 to 5.89 eV are collected before and after annealing at 607 °C to simulate the thermal processes during close-space sublimation of overlying cadmium telluride in that solar cell configuration. Complex dielectric function (ε = ε{sub 1} + iε{sub 2}) spectra are extracted for films as a function of oxygen gas flow ratio, deposition temperature, and post-deposition annealing using a parametric model accounting for critical point transitions and an Urbach tail for sub-band gap absorption. The results suggest an inverse relationship between degree of crystallinity and oxygen gas flow ratio, whereas annealing is shown to increase crystallinity in all samples. Direct band gap energies are determined from the parametric modeling of ε and linear extrapolations of the square of the absorption coefficient. As-deposited samples feature a range of band gap energies whereas annealing is shown to result in gap energies ranging only from 2.40 to 2.45 eV, which is close to typical band gaps for pure cadmium sulfide.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical and electrical properties of transparent conducting B-doped ZnO thin films prepared by various deposition methods

B-doped ZnO (BZO) thin films were prepared with various thicknesses up to about 500 nm on glass substrates at 200 deg. C by dc or rf magnetron sputtering deposition, pulsed laser deposition (PLD), and vacuum arc plasma evaporation (VAPE) methods. Resistivities of 4-6 x 10{sup -4}{Omega} cm were obtained in BZO thin films prepared with a B content [B/(B + Zn) atomic ratio] around 1 at. % by PLD and VAPE methods: Hall mobilities above 40 cm{sup 2}/Vs and carrier concentrations on the order of 10{sup 20} cm{sup -3}. All 500-nm-thick-BZO thin films prepared with a resistivity on the order of 10{sup -3}-10{sup -4}{Omega} cm exhibited an averaged transmittance above 80% in the wavelength range of 400-1100 nm. The resistivity in BZO thin films prepared with a thickness below about 500 nm was found to increase over time with exposure to various high humidity environments. In heat-resistance tests, the resistivity stability of BZO thin films was found to be nearly equal to that of Ga-doped ZnO thin films, so these films were judged suitable for use as a transparent electrode for thin-film solar cells.

36 MATERIALS SCIENCE↗

Preparation and characterization of Co single-crystal thin films with hcp, fcc and bcc structures

Co crystals with three different structures are realized in the form of single-crystal thin films hetero-epitaxially grown on single-crystal substrates by ultrahigh vacuum rf magnetron sputtering. hcp-, fcc-, and bcc-Co single-crystal films are formed on Cr(211){sub bcc}, Cu(100){sub fcc}, and GaAs(110){sub B3}, respectively. The film growth process is studied by RHEED, and the lattice constants of these Co films are determined by x-ray diffraction. The magnetization properties of these thin films are reflecting the magnetocrystalline anisotropies of Co crystals with the easy magnetization axes along hcp<0001>, fcc<111>, and bcc<100> directions.

36 MATERIALS SCIENCE↗

Influence of deposition pressure and pulsed dc sputtering on pumping properties of Ti-Zr-V nonevaporable getter films

The performance of a UHV vessel can be improved with a new CERN technology nonevaporable getter (NEG) coating, which is already widely used for accelerator vacuum chambers. Better understanding of the processes involved in NEG film deposition, activation, and poisoning should allow optimization and engineering of the film properties, which are necessary for a particular application. Ti-Zr-V NEG films were created by magnetron sputtering from a single Ti-Zr-V target, and the NEG performance and morphology dependence on deposition pressure, sputtering conditions, and substrate surface roughness have been investigated. It was found that the average grain size of the Ti-Zr-V film was 5-6 nm and was broadly independent of the substrate material and deposition conditions. However, film topography and density were shown to depend very much on the substrate surface roughness and deposition conditions. Rough substrates, high working pressures, and the absence of ion bombardment produced open columnar structures, whereas smooth substrates, ion assistance, and low pressures produced much denser layers. X-ray photoelectron spectroscopy studies have shown that full regeneration occurred at 300 degree sign C but film activation started at temperatures of as low as 160 degree sign C. The CO sticking probability reaches its maximum after activation at 250 degree sign C and is found to be up to 0.3 with a pumping capacity in the range of 0.8-1.2 ML. The samples activated at 160 degree sign C have a reduced pumping speed and capacity by an order of magnitude.

36 MATERIALS SCIENCE↗

Effects of deposition and annealing temperatures on the electrical and optical properties of Ag{sub 2}O and Cu{sub 2}O-Ag{sub 2}O thin films

Ag{sub 2}O and Ag{sub 2}O-Cu{sub 2}O films were deposited on glass substrates by magnetron sputtering of Ag and Cu targets at various substrate temperatures. After deposition, some of these films were annealed using a rapid thermal annealing system, with the variation of temperature. An UV-VIS-NIR photometer and a Hall measurement system were used to characterize the optical and electrical properties of these films. On annealing, Ag{sub 2}O (hexagonal) phase would slowly change to Ag+Ag{sub 2}O (cubic) phases when the annealing temperature is greater than 200 deg. C When the annealing temperature was higher than 450 deg. C, the Ag{sub 2}O phase would transform into a metallic Ag phase completely. Accordingly, the band gap of these films will change, along with the optical and electrical properties. In the study of Ag{sub 2}O-Cu{sub 2}O films, it is found that these two-phase composite films could exist obviously when deposited at room temperature. The photoinduced current of these composite films could be increased significantly, compared with that of a single Cu{sub 2}O phase. This is most likely due to that a large band gap semiconductor (Cu{sub 2}O) is coupled with a small band gap semiconductor (Ag{sub 2}O).

36 MATERIALS SCIENCE↗

Charge storage and tunneling mechanism of Ni nanocrystals embedded HfO{sub x} film

A nano-floating gate memory structure based on Ni nanocrystals (NCs) embedded HfO{sub x} film is deposited by means of radio-frequency magnetron sputtering. Microstructure investigations reveal that self-organized Ni-NCs with diameters of 4-8 nm are well dispersed in amorphous HfO{sub x} matrix. Pt/Ni-NCs embedded HfO{sub x}/Si/Ag capacitor structures exhibit voltage-dependent capacitance-voltage hysteresis, and a maximum flat-band voltage shift of 1.5 V, corresponding to a charge storage density of 6.0 × 10{sup 12} electrons/cm{sup 2}, is achieved. These capacitor memory cells exhibit good endurance characteristic up to 4 × 10{sup 4} cycles and excellent retention performance of 10{sup 5} s, fulfilling the requirements of next generation non-volatile memory devices. Schottky tunneling is proven to be responsible for electrons tunneling in these capacitors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron scattering mechanisms in Cu-Mn films for interconnect applications

Electrical properties and corresponding structural features of Cu-Mn alloy films with potential application as barrier and interconnect layers were studied. Cu-Mn films were deposited by DC magnetron sputtering at room temperature on SiO{sub 2} substrates. Electrical resistivity measurements were made as a function of film composition and temperature. The specific resistivity varies linearly with the Mn content showing a maximum of 205 μΩcm at 80 at. % Mn. The temperature coefficient of resistance (TCR) of all alloy films is low, showing non-metallic conductivity for most compositions. Also a minimum TCR has been observed in the 40–80 at. % Mn range which was attributed to a magnetic transformation around 200–300 K. Electrical resistivity measurements are correlated with the film structure revealed by transmission electron microscopy to clarify the phase regions throughout the composition range. In the 20–40 at. % and 70–80 at. % Mn ranges, two-phase structures were identified, where Cu- or Mn-rich solid solution grains were surrounded by a thin amorphous covering layer. Based on the revealed phase regions and morphologies electron scattering mechanisms in the system were evaluated by combining the Matthiessen's rule and the Mayadas-Schatzkes theory. Grain boundary reflectivity coefficients (r = 0.6–0.8) were calculated from fitting the model to the measurements. The proposed model indicates that, in a binary system, the special arrangement of the two phases results in new scattering mechanisms. The results are of value in optimizing the various parameters needed to produce a suitable barrier layer.

36 MATERIALS SCIENCE↗

Luminescent down shifting effect of Ce-doped yttrium aluminum garnet thin films on solar cells

Ce-doped yttrium aluminum garnet (YAG:Ce) thin films as luminescent down shifting (LDS) materials are introduced into the module of crystalline silicon solar cells. The films are deposited by RF magnetron sputtering on the lower surface of the quartz glass. They convert ultraviolet and blue light into yellow light. Experiments show that the introduction of YAG:Ce films improves the conversion efficiency from 18.45% of the cells to 19.27% of the module. The increasing efficiency is attributed to LDS effect of YAG:Ce films and the reduced reflection of short wavelength photons. Two intentionally selected samples with similar reflectivities are used to evaluate roughly the effect of LDS alone on the solar cells, which leads to a relative increase by 2.68% in the conversion efficiency.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Epitaxial BaTiO{sub 3}(100) films on Pt(100): A low-energy electron diffraction, scanning tunneling microscopy, and x-ray photoelectron spectroscopy study

The growth of epitaxial ultrathin BaTiO{sub 3} films on a Pt(100) substrate has been studied by scanning tunneling microscopy (STM), low-energy electron diffraction (LEED), and x-ray photoelectron spectroscopy (XPS). The films have been prepared by radio-frequency-assisted magnetron sputter deposition at room temperature and develop a long-range order upon annealing at 900 K in O{sub 2}. By adjusting the Ar and O{sub 2} partial pressures of the sputter gas, the stoichiometry was tuned to match that of a BaTiO{sub 3}(100) single crystal as determined by XPS. STM reveals the growth of continuous BaTiO{sub 3} films with unit cell high islands on top. With LEED already for monolayer thicknesses, the formation of a BaTiO{sub 3}(100)-(1 x 1) structure has been observed. Films of 2-3 unit cell thickness show a brilliant (1 x 1) LEED pattern for which an extended set of LEED I-V data has been acquired. At temperatures above 1050 K the BaTiO{sub 3} thin film starts to decay by formation of vacancy islands. In addition (4 x 4) and (3 x 3) surface reconstructions develop upon prolonged heating.

36 MATERIALS SCIENCE↗

Work functions of hafnium nitride thin films as emitter material for field emitter arrays

The work functions of hafnium nitride thin films prepared by radio-frequency magnetron sputtering were investigated in vacuum, before and after surface cleaning processes, with a view of improving the properties of as-fabricated field emitter arrays comprising hafnium nitride emitters. The measurement of the work function was first performed for the as-deposited films and then for films subjected to surface cleaning process, either thermal treatment or ion bombardment. Thermal treatment at a maximum temperature of 300 °C reduced the work function by 0.7 eV. Once the film was heated, the work function maintained the reduced value, even after cooling to room temperature. A little change in the work function was observed for the second and third thermal treatments. The ion bombardment was conducted by exposing the sample to a thin plasma for different sample bias conditions and processing times. When the sample was biased at −10 V, the work function decreased by 0.6 eV. The work function reduction became saturated in the early stage of the ion bombardment. When the sample was biased at −50 V, the work function exhibited different behaviors, that is, first it decreased rapidly and then increased in response to the increase in processing time. The lowest attainable work function was found to be 4.00 eV. It should be noted that none of the work function values reported in this paper were obtained using surfaces that were demonstrated to be free from oxygen contamination. The present results suggest that the current–voltage characteristics of a field emitter array can be improved by a factor of 25–50 by the examined postprocesses.

36 MATERIALS SCIENCE↗

A p-type Heusler compound: Growth, structure, and properties of epitaxial thin NiYBi films on MgO(100)

Epitaxial semiconducting NiYBi thin films were directly prepared on MgO(100) substrates by magnetron sputtering. The intensity ratio of the (200) and (400) diffraction peaks, I(200)/I(400) = 2.93, was close to the theoretical value (3.03). The electronic structure of NiYBi was calculated using wien2k, and a narrow indirect band gap of width of 210 meV was found. The valence band spectra of the films obtained by linear dichroism in hard x-ray photoelectron spectroscopy exhibit clear structures that are in good agreement with the calculated band structure of NiYBi.

36 MATERIALS SCIENCE↗

Effects of rapid thermal annealing on properties of Ga-doped Mg{sub x}Zn{sub 1−x}O films and Ga-doped Mg{sub x}Zn{sub 1−x}O/AlGaN heterojunction diodes

This study investigated the thermal annealing effects of Ga-doped Mg{sub x}Zn{sub 1−x}O (GMZO) films and GMZO/AlGaN heterojunction diodes. GMZO films were deposited using a radio-frequency magnetron sputtering system with a 4-in. ZnO/MgO/Ga{sub 2}O{sub 3} target. In addition, the Hall results, X-ray diffraction, transparent performance, and X-ray photoelectron spectroscopy (XPS) spectra were measured. The as-grown GMZO film deposited in this study exhibited a high transparency with transmittances over 95% in the visible region (360–700 nm) and a sharp absorption edge in the UV region (275–350 nm). The phenomenon of phase separation in the GMZO films was investigated based on the XPS spectra, revealing that an increase in the O-Zn signal accompanied a decline in the O-Ga signal after the thermal annealing. Moreover, the current-voltage (I-V) characteristics of the GMZO/AlGaN n-p junction diodes were examined at different annealing temperatures. The light emission derived from the forward-biased junction and near-ultraviolet (near-UV) light emission was evident at all p-n junctions. The n-GMZO/p-AlGaN diode annealed at 800 °C exhibited a brighter near-UV emission compared with the other diodes. In addition, the spectrum of diode annealed at 800 °C exhibited a broad peak at 474 nm (2.62 eV) and a tail of the emission spectrum extending to 850 nm. Based on these findings, the GMZO films are suitable for forming transparent contact layers in optoelectronic devices, and the n-GMZO/p-AlGaN junction diode is a feasible alternative in near-UV light emission devices.

36 MATERIALS SCIENCE↗

Growth and characterization of ZnO{sub 1−x}S{sub x} highly mismatched alloys over the entire composition

Alloys from ZnO and ZnS have been synthesized by radio-frequency magnetron sputtering over the entire alloying range. The ZnO{sub 1−x}S{sub x} films are crystalline for all compositions. The optical absorption edge of these alloys decreases rapidly with small amount of added sulfur (x ∼ 0.02) and continues to red shift to a minimum of 2.6 eV at x = 0.45. At higher sulfur concentrations (x > 0.45), the absorption edge shows a continuous blue shift. The strong reduction in the band gap for O-rich alloys is the result of the upward shift of the valence-band edge with x as observed by x-ray photoelectron spectroscopy. As a result, the room temperature bandgap of ZnO{sub 1−x}S{sub x} alloys can be tuned from 3.7 eV to 2.6 eV. The observed large bowing in the composition dependence of the energy bandgap arises from the anticrossing interactions between (1) the valence-band of ZnO and the localized sulfur level at 0.30 eV above the ZnO valence-band maximum for O-rich alloys and (2) the conduction-band of ZnS and the localized oxygen level at 0.20 eV below the ZnS conduction band minimum for the S-rich alloys. The ability to tune the bandgap and knowledge of the location of the valence and conduction-band can be advantageous in applications, such as heterojunction solar cells, where band alignment is crucial.

36 MATERIALS SCIENCE↗

Sputtered indium tin oxide as a recombination layer formed on the tunnel oxide/poly-Si passivating contact enabling the potential of efficient monolithic perovskite/Si tandem solar cells

We focus on utilizing sputtered indium tin oxide (ITO) as a recombination layer, having low junction damage to an n-type silicon solar cell with a front-side tunnel oxide passivating electron contact, thereby enabling the development of a high efficiency monolithic perovskite/Si tandem device. High transparency and low resistivity ITO films are deposited via low power DC magnetron sputtering at room temperature onto a front-side thin SiO x /n + poly-Si contact in a complete Cz n-Si cell with a back-side Al 2 O 3 /SiN x passivating boron-diffused p + -emitter on a random pyramid textured surface. We report the cell characteristics before and after ITO sputtering, and we find a cure at 250 °C in air is highly effective at mitigating any sputtering induced damage. Our ITO coated sample resulted in an implied open-circuit voltage (iV oc ) of 684.7 ± 11.3 mV with the total saturation current density of 49.2 ± 14.8 fA/cm 2 , an implied fill factor (iFF) of 81.9 ± 0.8%, and a contact resistivity in the range of 60 mΩ-cm 2 to 90 mΩ-cm 2 . After formation of a local Ag contact to the rear emitter and sputtered ITO film as the front-side contact without grid fingers, the pseudo-efficiency of 20.2 ± 0.5% was obtained with the V oc of 670.4 ± 7 mV and pseudo FF of 77.3 ± 1.3% under simulated one sun with the calculated short-circuit current density of 30.9 mA/cm 2 from the measured external quantum efficiency. Furthermore, our modelling result shows that efficiency exceeding 25% under one sun is practically achievable in perovskite/Si tandem configuration using the ITO recombination layer connecting a perovskite top cell and a poly-Si bottom cell.

14 SOLAR ENERGY↗

Nb3Sn Superconducting Radiofrequency Cavity Fabricated by Sputter Deposition from a Stoichiometric Target

Nb$_3$Sn is a promising coating material for superconducting radiofrequency cavities in next-generation accelerators due to its higher superconducting transition temperature (~18.3 K) and superheating field (~400 mT), offering the potential to surpass the intrinsic performance limits of bulk niobium. We developed a sputter coating technique employing a stoichiometric target to fabricate Nb$_3$Sn films on the inner surfaces of niobium cavities. A Nb$_3$Sn tube target, prepared by growing a >20 m thick Nb$_3$Sn coating on the surface of a Nb tube via a Sn vapor diffusion process, was used in a DC cylindrical magnetron sputtering system. Approximately 170 nm thick Nb-Sn films were sputter-coated onto flat Nb substrates positioned to replicate the beam tube and equator regions of a 2.6 GHz cavity, followed by annealing at 950 °C for 3 hours to form Nb$_3$Sn. The composition, morphology, and structure of the annealed Nb$_3$Sn films were examined. Then, a ~1.2 m-thick film was sputter-coated onto the interior of a 2.6 GHz Nb cavity following the procedure developed for the flat samples. The cavity was subsequently annealed under the same conditions used for the flat samples. Cryogenic RF testing of the sputter-coated cavity demonstrated a T$_c$ of approximately 17.8 K, consistent with Nb$_3$Sn layer. Subsequently, the cavity underwent a light Sn recoating followed by a vapor diffusion Nb$_3$Sn coating process, achieving a quality factor of approximately 8.5 × 10$^9$ and an accelerating gradient of up to 11.3 MV/m at 4.2 K.

Shakel, Md Sharifuzzaman [Old Dominion U.; Jeffers↗

Structural, mechanical, and magnetic properties of GaFe{sub 3}N thin films

Using the density-functional theory, the structural, mechanical, and magnetic properties were investigated for different GaFe{sub 3}N configurations: ferromagnetic, ferrimagnetic, paramagnetic, and nonmagnetic. Ferrimagnetic and high-spin ferromagnetic states exhibit the lowest energy and are the competing ground states as the total energy difference is 0.3 meV/atom only. All theoretically predicted values could be fully confirmed by experiments. For this, the authors synthesized phase pure, homogeneous, and continuous GaFe{sub 3}N films by combinatorial reactive direct current magnetron sputtering. Despite the low melting point of gallium, the authors succeeded in the growth of GaFe{sub 3}N films at a temperature of 500 °C. Those thin films exhibit a lattice parameter of 3.794 Å and an elastic modulus of 226 ± 20 GPa. Magnetic susceptibility measurements evidence a magnetic phase transitions at 8.0 ± 0.1 K. The nearly saturated magnetic moment at ±5 T is about 1.6 μB/Fe and is close to the theoretically determined magnetic moment for a ferrimagnetic ordering (1.72 μB/Fe).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Diffusion behavior of Ag in TiO2 nanofilms

Highlights: • We prepared Ag/TiO{sub 2} bilayer nanofilms and heat treatment at 400 °C lead to the formation of Ag nanoparticles, which evenly distributed inside TiO{sub 2} nanofilms. • Ag is not oxidized during the heat treatment. • The morphology and size of Ag nanoparticles after heat treatment is temperature related, higher temperature lead to larger Ag nanoparticles on the surface of the film. • The diffusion process is of Ag much easier in amorphous than in anatase structure. - Abstract: Using magnetron sputtering, Ag/TiO{sub 2} bilayer nanofilms were deposited on glass substrates. Heat-treating the Ag/TiO{sub 2} nanofilms at 400 °C led to the formation of Ag nanoparticles, which dispersed inside the TiO{sub 2} films as well as the free surface of the TiO{sub 2} films. After heat treatment the sample at 500 °C, larger Ag nanoparticles could be observed on the surface, which means the particle size after heat treatment is temperature related. Anatase TiO{sub 2} phase was formed after the Ag/TiO{sub 2} films were heat-treated at 400 °C. SEM and TEM were used to investigate the morphology and structure of the films and it was found that Ag was not oxidized during heat treatment. The diffusion process of Ag in TiO{sub 2} film is also related to the order of Ag layer and TiO{sub 2} layer on glass substrate. Moreover, the diffusion process is much easier in amorphous than that in anatase structure.

77 NANOSCIENCE AND NANOTECHNOLOGY↗