Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Effect of porous morphology on phase transition in vanadium dioxide thin films

Vanadium oxide (VO{sub 2}) thin films were prepared on Si (100) substrates by direct current magnetron sputtering at room temperature, and then, postannealing was conducted at 450 °C for 2 h in vacuum. Structural characterizations demonstrated that the thin films exhibited porous morphology upon thermal annealing and the porosity and pore size depended on the oxygen flow rate in the process of film fabrication. Raman spectra were measured in the temperature range of 303–343 K, and resistance measurement was conducted in the temperature range of 293–363 K, to study the influence of porous morphology on the phase transition in VO{sub 2} thin films. It was illustrated that the porous morphology could provide a free space to release the stress induced in the monoclinic-to-tetragonal phase transition of VO{sub 2}, and lower the transition temperature to a certain degree.

36 MATERIALS SCIENCE↗

Investigation of the structural-phase state and the impact-protective properties of optically transparent Si-Al-N coatings

The results of the study of the structural-phase state, the optical and impact-protective properties of Si-Al-N coatings with a thickness from 0.9 to 6.2 μm deposited by pulsed magnetron sputtering on a substrate made of the KV type quartz glass are presented. The formation of the nanoscale single-phase AlN (hcp) with a crystallite size up to 20 nm was discovered by the X-ray diffraction method. Coatings based on Si-Al-N are characterized by high values of microhardness (H{sub μ} ≈ 25 GPa) and the coefficient of elastic recovery (k{sub y} = 0.71–0.85). The Si-Al-N coatings are characterized by a high degree of transparency (about 80%) in the visible range of wavelengths and are completely opaque in the ultra-violet regions. The refractive index of the glass samples with coatings on the basis of Si-Al-N was determined using the transmission spectra whose value decreases from 2.04 to 1.87 with increasing thickness of coatings. The results of the study of the surface density of the craters formed on the surface of the initial quartz glass and the quartz glass with Si-Al-N coatings due to the influence of high-speed Fe particles of the micron size are described.

36 MATERIALS SCIENCE↗

Linear and nonlinear optical properties of SrBi{sub 4}Ti{sub 4}O{sub 15} thin films

Polycrystalline SrBi{sub 4}Ti{sub 4}O{sub 15} thin films with good morphology and layered perovskite structure were fabricated on fused silica substrates using r f magnetron sputtering system at various oxygen mixing percentages (25 and 50). The crystallite sizes of the particles are in 17-28 nm range. The Nonlinear optical properties were investigated by using Z-scan method at a wavelength of 800 nm with 2 ps duration pulses. The films exhibit the fast and giant optical nonlinearities having the two-photon absorption coefficient (β) with magnitude of 10{sup −8}-10{sup −9} cm/W and the nonlinear refraction coefficient of ∼10{sup −12} cm{sup 2}/W. These results indicate SrBi{sub 4}Ti{sub 4}O{sub 15} thin films are promising candidates for applications in nonlinear optical and optical signal processing devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal Stability and Catalytic Activity of Gold Nanoparticles Supported on Silica

2.5 nm gold nanoparticles were grown on a fumed silica support, using the physical vapor deposition technique of magnetron sputtering, that are thermally stable when annealed in an oxygen containing environment up to at least 500 C. Traditional Au/TiO{sub 2} catalysts rapidly sinter to form large 13.9 nm gold clusters under these annealing conditions. This surprising stability of Au/SiO{sub 2} is attributed to the absence of residual impurities (ensured by the halide-free production method) and a strong bond between gold and defects at the silica surface (about 3 eV per bond) estimated from density functional theory (DFT) calculations. The Au/SiO{sub 2} catalysts are less active for CO oxidation than the prototypical Au/TiO2 catalysts, however they can be regenerated far more easily, allowing the activity of a catalyst to be fully recovered after deactivation.

36 MATERIALS SCIENCE↗

Rhodium Catalysts in the Oxidation of CO by O 2 and NO: Shape, Composition, and Hot Electron Generation

It is well known that the activity, selectivity, and deactivation behavior of heterogeneous catalysts are strongly affected by a wide variety of parameters, including but not limited to nanoparticle size, shape, composition, support, pretreatment conditions, oxidation state, and electronic state. Enormous effort has been expended in an attempt to understand the role of these factors on catalytic behavior, but much still remains to be discovered. In this work, we have focused on deepening the present understanding of the role of nanoparticle shape, nanoparticle composition, and hot electrons on heterogeneous catalysis in the oxidation of carbon monoxide by molecular oxygen and nitric oxide. These reactions were chosen because they are important for environmental applications, such as in the catalytic converter, and because there is a wide range of experimental and theoretical insight from previous single crystal work as well as experimental data on nanoparticles obtained using new state-of-the-art techniques that aid greatly in the interpretation of results on complex nanoparticle systems. In particular, the studies presented in this work involve three types of samples: ~ 6.5 nm Rh nanoparticles of different shapes, ~ 15 nm Rh 1-x Pd x core-shell bimetallic polyhedra nanoparticles, and Rh ultra-thin film (~ 5 nm) catalytic nanodiodes. The colloidal nanoparticle samples were synthesized using a co-reduction of metal salts in alcohol and supported on silicon wafers using the Langmuir-Blodgett technique. This synthetic strategy enables tremendous control of nanoparticle size, shape, and composition. Nanoparticle shape was controlled through the use of different organic polymer capping layers. Bimetallic core-shell nanoparticles were synthesized by careful choice of metal salt precursors. Rh/TiO x and Rh/GaN catalytic nanodiodes were fabricated using a variety of thin film device fabrication techniques, including reactive DC magnetron sputtering, electron beam evaporation, and rapid thermal annealing. The combination of these techniques enabled control of catalytic nanodiode morphology, geometry, and electrical properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High frequency characteristics of FeCoAlO thin films combined the effects of stress and magnetic field

The soft magnetic FeCoAlO thin films with different response at high frequency were prepared by using RF magnetron sputtering. Two different configurations of the sputtering targets were used: the Al{sub 2}O{sub 3} chips were placed on Fe{sub 70}Co{sub 30} disk either uniformly dispersed on the sputtering area (Target-A) or dispersed on the half side of the sputtering area (Target-B). It was found that, although, the films deposited from both of Target A and B possessed good soft magnetic properties and in-plane uniaxial magnetic anisotropy, they showed different behaviors at high frequency. The films deposited by using Target-A have mean permeability of 500 and a cut-off frequency (f{sub r}) of around 780 MHz, while the films deposited by using Target-B have mean permeability of 200 and a f{sub r} of 3.4 GHz. The higher f{sub r} of the later corresponds to the higher uniaxial anisotropic field in the films deposited by using the Target-B, which due to an extra anisotropy induced by the stress resulted from gradient of the Al-O composition. By adjusting the configuration of Target-B, the permeability and f{sub r} can be tuned to satisfy the different requirements for certain industrial applications.

36 MATERIALS SCIENCE↗

Polarization Resistance of La0.85Ca0.15MnO3 Cathodes for Solid Oxide Fuel Cells (SOFCs) Measured Using Patterned Electrodes

Patterned cathodes of calcium-doped lanthanum manganite (LCM) were fabricated on polycrystalline yttria-stabilized zirconia (YSZ) substrates by RF magnetron sputtering and photolithographic techniques. Samples were generated with a constant electrode/electrolyte contact area but different three phase boundary (TPB) lengths (lTPB's). Electrochemical impedance spectroscopy (EIS) was performed in the oxygen partial pressure (pO2) and temperature range of 10-3 atm to 1.00 atm and 600-800 C respectively. The area specific polarization resistance, Rp, was found to scale linearly with the inverse of lTPB, suggesting that the TPB is the active region for oxygen reduction. The resistivity decreased with increased temperature and pO2 and showed an activation energy of 1.17 +/- 0.03 eV.

(SOFCs)↗

Room temperature ferromagnetism in pristine MgO thin films

Robust ferromagnetic ordering at, and well above room temperature is observed in pure transparent MgO thin films (<170 nm thick) deposited by three different techniques. Careful study of the wide scan x-ray photoelectron spectroscopy rule out the possible presence of any magnetic contaminants. In the magnetron sputtered films, we observe magnetic phase transitions as a function of film thickness. The maximum saturation magnetization of 5.7 emu/cm{sup 3} is measured on a 170 nm thick film. The films above 500 nm are found to be diamagnetic. Ab initio calculations suggest that the ferromagnetism is mediated by cation vacancies.

36 MATERIALS SCIENCE↗

Formation of tetragonal or monoclinic ZrO{sub 2} coatings by oxygen plasma treatment of Zr{sub 74.7}Cu{sub 19.7}Nb{sub 5.6} glassy thin films

The authors report on the production of stable nanostructured tetragonal and/or monoclinic ZrO{sub 2} nanopillars achieved by means of oxygen plasma treatment of ternary Zr{sub 74.7}Cu{sub 19.7}Nb{sub 5.6} glassy films. The Zr-based metallic glass thin films were successfully deposited by magnetron sputtering and subsequently subjected to oxygen plasma for various exposure times. The compositions of the oxidized films were determined by Auger electron spectroscopy and X-Ray photoelectron spectroscopy depth profiling while the surface morphology was evaluated by means of atomic force microscopy and scanning electron microscopy. X-Ray diffraction was used for the structural analysis. Our results show that, depending on the length of time of oxygen plasma treatment, tetragonal and/or monoclinic ZrO{sub 2} films can be formed, the surface morphology of which exhibit nanopillar structures with an increased effective surface. These findings provide an easy and efficient way for growing ZrO{sub 2} coatings with a predefined structure suitable for protective and possibly for catalytic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Acoustoelastic effect of textured (Ba,Sr)TiO{sub 3} thin films under an initial mechanical stress

Acoustoelastic (AE) analysis of initial stresses plays an important role as a nondestructive tool in current engineering. Two textured BST (Ba{sub 0.65}Sr{sub 0.35}TiO{sub 3}) thin films, with different substrate to target distance, were grown on Pt(111)/TiO{sub 2}/SiO{sub 2}/Si(001) substrate by rf-magnetron sputtering deposition techniques. A conventional “sin{sup 2} ψ” method to determine residual stress and strain in BST films by X-ray diffraction is applied. A laser acoustic waves (LA-waves) technique is used to generate surface acoustic waves (SAW) propagating in both samples. Young's modulus E and Poisson ratio ν of BST films in different propagation directions are derived from the measured dispersion curves. Estimation of effective second-order elastic constants of BST thin films in stressed states is served in SAW study. This paper presents an original investigation of AE effect in prestressed Ba{sub 0.65}Sr{sub 0.35}TiO{sub 3} films, where the effective elastic constants and the effect of texture on second and third order elastic tensor are considered and used. The propagation behavior of Rayleigh and Love waves in BST thin films under residual stress is explored and discussed. The guiding velocities affected by residual stresses, reveal some shifts which do not exceed four percent mainly in the low frequency range.

36 MATERIALS SCIENCE↗

Study of Fe-Co Nanocomposite Films

Moessbauer study of nanogranular ferromagnetic FeCo films is presented. Two ways of production of nanocomposite systems were employed: (i) hollow cathode plasma jet deposition process, and (ii) laser ablation from Fe-Co metallic targets by means of a KrF excimer laser and r.f. magnetron sputtering. Complementary information on the composition of the samples were obtained by nuclear magnetic resonance of {sup 57}Fe and {sup 59}Co nuclei, conversion electron Moessbauer spectroscopy, and high resolution transmission electron microscopy. The films contain crystalline nanoparticles, 5-20 nm in size, embedded in an amorphous matrix.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Improving the efficiency of high-power diode lasers using diamond heat sinks

Using multifunctional ion beam and magnetron sputtering systems, we have developed chemical and vacuum techniques for producing metallic coatings firmly adherent to various surfaces, with application to copper and diamond heat sinks for diode lasers. Conditions have been optimised for mounting diode lasers and bars using the proposed metallisation processes, and significant improvements in the output parameters of the devices have been achieved. The power output of cw laser diodes on diamond heat sinks increases by up to a factor of 2, the linear (working) portion of their power-current characteristic becomes markedly broader, and their slope efficiency increases by a factor of 1.5 - 2 relative to that of lasers on copper heat spreaders. The use of diamond heat sinks extends the drive current range of pulsed diode bars by a factor of 2 - 3 and enables them to operate at more than one order of magnitude longer pump pulse durations (up to milliseconds) when the pulse repetition rate is at least 10 Hz. (lasers)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dielectric properties of aluminum silver alloy thin films in optical frequency range

The dielectric properties of direct current (dc) magnetron sputtering aluminum silver alloy films in optical frequency have been quantitatively studied by variable angle spectroscopic ellipsometry. The structure and surface topography of the alloy films were characterized using scanning probe microscopy and x-ray diffraction. The Drude-Lorentz model was used to simulate the dielectric function of Al-Ag alloy films. Meanwhile, the effective medium theory has been utilized for the treatment of surface roughness. We found that the interband transition around 1.5 eV can be shifted through a variable annealing temperature and a changeable silver percentage of Al-Ag alloys.

36 MATERIALS SCIENCE↗

In-situ synchrotron x-ray studies of the microstructure and stability of In 2 O 3 epitaxial films

We report on the synthesis, stability, and local structure of In2O3 thin films grown via rf-magnetron sputtering and characterized by in-situ x-ray scattering and focused x-ray nanodiffraction. We find that In2O3 deposited onto (0 0 1)-oriented single crystal yttria-stabilized zirconia substrates adopts a Stranski-Krastanov growth mode at a temperature of 850 degrees C, resulting in epitaxial, truncated square pyramids with (1 1 1) side walls. We find that at this temperature, the pyramids evaporate unless they are stabilized by a low flux of In2O3 from the magnetron source. We also find that the internal lattice structure of one such pyramid is made up of differently strained volumes, revealing local structural heterogeneity that may impact the properties of In2O3 nanostructures and films.

36 MATERIALS SCIENCE↗

Elaboration, characterization of CrN- based coatings

Cr, CrN and CrAlN monolayers were synthesized by RF dual magnetron sputtering on AISI4140 steel and silicon substrates at 200 deg. C. Multilayers coatings based on the three mono-layers such as CrN/CrAlN and Cr/CrN/CrAlN were also synthesized only on Si. The physico-chemical and mechanical properties of the layers were determined by AFM, SEM+WDS, stress, roughness and nanoindentation measurements. The influence of the thickness on the mechanical properties of the monolayers stresses has been studied and as a consequence we compared the mono and multilayers stress state.

36 MATERIALS SCIENCE↗

Exchange Spring in a Heterostructure with Pd{sub 0.96}Fe{sub 0.04} Low-Temperature Ferromagnet

The exchange bias of the magnetic hysteresis loop and the exchange-spring effect have been observed in thin-film heterostructures comprising layers of Pd{sub 0.96}Fe{sub 0.04} low-temperature ferromagnet, metallic cobalt, and cobalt monoxide (CoO) grown on single-crystalline sapphire by methods of magnetron sputtering and molecular beam epitaxy in an ultrahigh-vacuum system. It is established that the exchange anisotropy of Pd{sub 0.96}Fe{sub 0.04} layer in Pd{sub 0.96}Fe{sub 0.04}/CoO/Co/Al{sub 2}O{sub 3} thin-film heterostructure is absent and the exchange-spring effect in this system is not manifested. In the case of a Pd{sub 0.96}Fe{sub 0.04}/Co/CoO/Al{sub 2}O{sub 3} structure, it is shown that, according to the results of magnetometric measurements, the inversion of the order of antiferromagnetic and ferromagnetic layers leads to pinning of the magnetic moment of Pd{sub 0.96}Fe{sub 0.04} layer at the interface with cobalt and to realization of the exchange-spring effect. Additional evidence in favor of this interpretation was obtained using the micromagnetic modeling of magnetic hysteresis loops.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Persistent photoconductivity due to trapping of induced charges in Sn/ZnO thin film based UV photodetector

Photoconductivity relaxation in rf magnetron sputtered ZnO thin films integrated with ultrathin tin metal overlayer is investigated. Charge carriers induced at the ZnO-metal interface by the tin metal overlayer compensates the surface lying trap centers and leads to the enhanced photoresponse. On termination of ultraviolet radiation, recombination of the photoexcited electrons with the valence band holes leaves the excess carriers deeply trapped at the recombination center and holds the dark conductivity level at a higher value. Equilibrium between the recombination centers and valence band, due to trapped charges, eventually stimulates the persistent photoconductivity in the Sn/ZnO photodetectors.

36 MATERIALS SCIENCE↗

Ion distribution measurements to probe target and plasma processes in electronegative magnetron discharges. II. Positive ions

Spectra of the ion mass and energy distributions of positive ions in reactive (Ar/O{sub 2}) and nonreactive (Ar) dc magnetron sputtering discharges have been investigated by energy-resolved mass spectrometry. The results of three sputter target materials, i.e., Cu, In, and W are compared to each other. Besides the main gas constituents, mass spectra reveal a variety of molecular ions which are dependent on the target material. In reactive mode, ArO{sup +} is always observed in Ar/O{sub 2} but molecules containing Ar and the metal were exclusively found for the Cu target. The occurrence of the different ions is explained in the context of their bond strengths obtained from density functional theory calculations. The energy spectra generally contain the known low-energy peak corresponding to the plasma potential. Differently extended high-energy tails due to sputtered material were observed for the different targets. Besides these, high-energetic ions were detected with up to several 100 eV. Their energies are significantly different for Ar{sup +} and O{sup +} with Ar{sup +} strongly depending on the target material. The spectra are discussed together with results from transport of ions in matter (TRIM) calculation to elucidate the origin of these energetic ions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗