Search NASA⌕ Search

SEARCH · Search NASA

Results for “Meteorologic data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Monitoring Potential Transport of Radioactive Contaminants in Shallow Ephemeral Channels: FY2017

The Desert Research Institute (DRI) is conducting a field assessment of the potential for contaminated soil to be transported from the Smoky Site Contamination Area (CA) as a result of storm runoff. This activity supports U.S. Department of Energy (DOE) Environmental Management Nevada Program (EM-NV) efforts to establish post-closure monitoring plans for the Smoky Site Soils Corrective Action Unit (CAU) 550. The work is intended to confirm the likely mechanism of transport and determine the meteorological conditions that might cause the movement of contaminated soils, as well as determine the particle size fraction that is most closely associated with transported radionuclide-contaminated soils. These data will facilitate the design of the appropriate post-closure monitoring program. In 2011, DRI installed a meteorological monitoring station on the west side of the Smoky Site CA and a hydrologic (runoff) monitoring station within the CA, near the east side. Air temperature, wind speed, wind direction, relative humidity, precipitation, solar radiation, barometric pressure, soil temperature, and soil water content are collected at the meteorological station. The maximum, minimum, and average or total values (as appropriate) for each of these parameters are recorded for each 10-minute interval. The maximum, minimum, and average water depth in the flume installed at the hydrology station are also recorded for every 10-minute interval. This report presents data collected from these stations during fiscal year (FY) 2017.

(CA)↗

Mechanisms Behind the Long‐Distance Diurnal Offshore Precipitation Propagation in Northwestern South America

Abstract Northwestern South America (NWSA) is the rainiest region on Earth, with diurnal precipitation exhibiting extensive westward offshore propagation of up to about 1,200 km in boreal spring (March‐May). The diurnal offshore precipitation propagation begins slowly (3–10 m s −1 ) near the coast of NWSA (<200 km) but accelerates significantly (∼20 m s −1 ) and shows an afternoon enhancement far from the coast (>400 km). However, the driving mechanisms behind this long‐distance precipitation propagation remain unclear. Using a new cloud tracking and classification data set, we found that mesoscale convective systems (MCSs) are the dominant precipitation contributors in the offshore region of NWSA. Cloud tracking shows that the long‐distance propagation and the afternoon enhancement of diurnal precipitation primarily originate from MCSs initiated in the early morning, either over open oceans or from the coast of Central America. Composite tendency analysis shows that MCSs initiated near the coast of Central America have significant upward cooling and moistening signals starting from the surface before initiation. Further analysis of surface diurnal perturbation fields indicates that the land breeze is the primary driving mechanism for MCS initiation. Conversely, for MCSs initiated over open oceans, a significant downward cooling signal from 400 hPa is observed ∼7 hr before initiation, corresponding to the passage of diurnal gravity waves emitted from the Andes. Additionally, our findings highlight the critical role of lower and mid‐level moisture conditions in MCS initiation, alongside the influence of gravity waves.

Hu, Jingyi [Department of Meteorology and Atmosphe↗

Distinct Turbulence Structures in Stably Stratified Boundary Layers With Weak and Strong Surface Shear

Turbulence structures and exchange of momentum and heat in the nocturnal stable boundary layer (SBL) show distinct features under different stability conditions prompting interest in their connection. Here eddy covariance data collected at four different heights on a 62-m meteorological tower over a large open flat terrain are used to characterize different SBL states and associated turbulence structures. In a SBL characterized by strong near-surface winds, turbulent eddy sizes scale with their observational heights and the SBL experiences enhanced turbulent mixing of momentum and heat throughout (a state hereafter referred to as a “coupled” state). Conversely, in a decoupled SBL, weak winds occur near the surface and turbulent eddies are depressed and detached from the boundary leading to suppressed vertical mixing and layered SBL profiles. Because the transport of momentum and heat to the surface across SBL layers is determined by turbulent eddies, cross-layer correlation and the aforementioned SBL coupling states can be delineated by distinct turbulence structures.

54 ENVIRONMENTAL SCIENCES↗

Hydrodynamic Modeling of Stratification and Mixing in a Shallow, Tropical Floodplain Lake

Abstract Floodplain lakes are widespread and ecologically important throughout tropical river systems, however data are rare that describe how temporal variations in hydrological, meteorological and optical conditions moderate stratification and mixing in these shallow lakes. Using time series measurements of meteorology and water‐column temperatures from 17 several day campaigns spanning two hydrological years in a representative Amazon floodplain lake, we calculated surface energy fluxes and thermal stratification, and applied and evaluated a 3‐dimensional hydrodynamic model. The model successfully simulated diel cycles in thermal structure characterized by buoyancy frequency, depth of the actively mixing layer, and other terms associated with the surface energy budget. Diurnal heating with strong stratification and nocturnal mixing were common; despite considerable heat loss at night, the strong stratification during the day meant that mixing only infrequently extended to the bottom at night. Simulations indicated that the diurnal thermocline up and downwelled creating lake‐wide differences in near‐surface temperatures and mixing depths. Infrequent full mixing creates conditions conducive to anoxia in these shallow lakes given their warm temperatures.

Environmental Sciences & Ecology↗

Quantifying Groundwater Response and Uncertainty in Beaver‐Influenced Mountainous Floodplains Using Machine Learning‐Based Model Calibration

Abstract Beavers ( Castor canadensis ) alter river corridor hydrology by creating ponds and inundating floodplains, and thereby improving surface water storage. However, the impact of inundation on groundwater, particularly in mountainous alluvial floodplains with permeable gravel/cobble layers overlain by a soil layer, remains uncertain. Numerical modeling across various floodplain structures considers topographic and sediment complexity and multidirectional flow, linking inundation to groundwater response. This study develops a model‐data integration workflow to address uncertainty in groundwater response to beaver‐induced inundations in a mountainous alluvial floodplain in the Upper Colorado River Basin. Uncertain factors include seasonal hydrologic dynamics, hydraulic conductivities, floodplain structures, and meteorological forcings. We employed an ensemble of groundwater models, based on geophysical and hydrologic data, with machine learning‐based calibration using a neural density estimator. This allowed us to quantify the vertical flux from the soil layer to the permeable gravel bed, the down‐valley underflow within the gravel bed, and their ratios. Results show a significant increase in the vertical flux relative to down‐valley underflow, from 2 during dry pond periods to 20 during wet periods, serving as an analogy for conditions without and with beaver ponds. The study highlights the influence of floodplain structure on groundwater storage, water balance, and water quality impacted by beaver ponds. A thick gravel bed layer, with a large down‐valley underflow, minimizes the effect of beaver‐induced inundation on water quality. We emphasize the need for field‐scale measurements of floodplain structure and improved characterization of evapotranspiration changes to reduce uncertainty in groundwater response. Plain Language Summary Beavers change the flow of water in river corridors by creating ponds, expanding wetlands, and flooding floodplains. This increases surface water area, promotes plant growth, and enhances biodiversity. However, the impact of this flooding on groundwater flow is not well understood, especially in mountainous areas with gravel layers where water moves easily beneath soil. In this study, we used numerical modeling to investigate how beaver ponds influence groundwater in a mountainous floodplain of the Upper Colorado River Basin. We adapted a machine learning method to validate our numerical models using multiple field data sets. Our findings show that beaver ponds significantly increase vertical water flow from the soil to the gravel during wet periods, compared to when the ponds are fully drained. The study also highlights the importance of floodplain structure in controlling both water flow in gravel layers along the river direction and vertical flow from the soil to the gravel with the presence of beavers. To reduce uncertainty in groundwater response, we emphasize the need for more field‐scale measurements of floodplain structure, hydraulic properties, and evapotranspiration changes. Key Points Floodplain structures and hydraulic conductivities are important for groundwater response with beaver ponds in mountainous floodplains Large down‐valley underflow in permeability‐stratified floodplains reduces beaver‐induced impacts on groundwater storage and water quality Machine learning‐based model calibration methods are effective for estimating posterior distributions of groundwater model parameters

Wang, Lijing↗

The FLUXNET2015 dataset and the ONEFlux processing pipeline for eddy covariance data

The FLUXNET2015 dataset provides ecosystem-scale data on CO2, water, and energy exchange between the biosphere and the atmosphere, and other meteorological and biological measurements, from 212 sites around the globe (over 1500 site-years, up to and including year 2014). These sites, independently managed and operated, voluntarily contributed their data to create global datasets. Data were quality controlled and processed using uniform methods, to improve consistency and intercomparability across sites. The dataset is already being used in a number of applications, including ecophysiology studies, remote sensing studies, and development of ecosystem and Earth system models. FLUXNET2015 includes derived-data products, such as gap-filled time series, ecosystem respiration and photosynthetic uptake estimates, estimation of uncertainties, and metadata about the measurements, presented for the first time in this paper. In addition, 206 of these sites are for the first time distributed under a Creative Commons (CC-BY 4.0) license. This paper details this enhanced dataset and the processing methods, now made available as open-source codes, making the dataset more accessible, transparent, and reproducible.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

A global map of urban extent from nightlights

Urbanization, one of the major human induced land-cover and land-use changes, has a profound impact on the Earth system including biodiversity, the cycling of water and carbon and exchange of energy and water between Earth’s surface and atmosphere, all affecting weather and climate. Accurate information on urban areas and their spatial distribution at the regional and global scales is important for scientific understanding of their contribution to the changing Earth system, and for practical management and policy decisions. We developed a method to map the urban extent from the Defense Meteorological Satellite Program/Operational Linescan System (DMSP/OLS) nighttime stable-light data at the global level and derived a new global map of 1-km urban extent for year 2000. Based on this map, we found that globally, urban land area is about 0.5% of total land area but ranges widely at regional level from 0.1% in Oceania to 2.3% in Europe. At the country level, urban land area varies from lower than 0.01% to higher than 10%, but is lower than 1% for most (70%) countries. Urbanization follows land mass distribution, as anticipated, with the highest concentration found between 30°N to 45°N latitude and the largest longitudinal peak around 80°W. Based on a sensitivity analysis and comparison with other global urban area products, we found that our global product of urban area provides a reliable estimate of global urban areas and offer the potential of capturing more accurately their spatial and temporal dynamics.

54 ENVIRONMENTAL SCIENCES↗

The birth of a field through a marriage of scales: urban meteorological modeling meets regional climate modeling

Urban meteorological modeling and regional climate modeling developed largely independently, with each discipline addressing different aspects of atmospheric processes across space and time. In this review, I show that urban climate modeling did not arise as a simple scaling extension of urban meteorological modeling or an add-on to regional climate modeling, but instead emerged through the selective inheritance of complementary strengths from its parents after both disciplines reached sufficient methodological maturity. By tracing the parallel evolution of these disciplines, I demonstrate that urban climate modeling inherited the physically explicit treatment of the built environment developed within urban meteorological modeling, and the hierarchical scale translation and climatological framing that matured within regional climate modeling, allowing urban effects to influence climate-relevant outcomes. Building on this synthesis, I propose an objective, and methodologically-grounded definition of urban climate modeling that distinguishes it from urban meteorological modeling. This distinction is increasingly important as urban climate data informs decisions with long-lived societal consequences, and as ambiguity in terminology risks conflating fundamentally different modeling frameworks with distinct physical meaning and decision relevance. In addition to a clarifying definition, this review outlines a research framework for advancing urban climate modeling through scale-aware coupling strategies that preserve physically consistent urban-atmosphere interactions.

regional climate↗

Measured Long-Term Solar Irradiance for Climate Studies

Solar radiation is primarily measured using high-quality radiometers (e.g., pyranometers and pyrheliometers). These instruments need to be calibrated regularly (every two years at a minimum). They are also susceptible to various sources of uncertainties. Therefore, rigorous data quality assessment is required to obtain high-confidence data from these radiometers. This is especially true when the data is used to understand climatic trends and/or extreme weather events. In this study, we attempted to create a continuous and reliable dataset by correcting the underlying data which we believe contains bias due to reference pyranometers swap procedures. These biases can be significant which can be up to two percentage points thereby influencing the interpretation of climate changes and/or extreme events. This study elaborates on the biases and methods to correct those biases.

data integrity↗

Renewable Energy Certificate Program

This project was primarily to develop and implement a curriculum which will train undergraduate and graduate students at the University seeking a degree as well as training for enrollees in a special certification program to prepare individuals to be employed in a broad range of occupations in the field of renewable energy and energy conservation. Curriculum development was by teams of Saint Francis University Faculty in the Business Administration and Science Departments and industry experts. Students seeking undergraduate and graduate degrees are able to enroll in courses offered within these departments which will combine theory and hands-on training in the various elements of wind power development. For example, the business department curriculum areas include economic modeling, finance, contracting, etc. The science areas include meteorology, energy conversion and projection, species identification, habitat protection, field data collection and analysis, etc.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Summary of the ARM activities at ECMWF from 2007-2009

The European Centre for Medium-Range Weather Forecasts (ECMWF), as one of the leading centres in numerical weather prediction, has been an active user of observations for model evaluation for many years. Many examples exist where detailed experimental studies have inspired model improvement. To establish a link between the Atmospheric Radiation Measurement (ARM) research and ECMWF's model development, funding was provided for an \u201cARM fellow\u201d at ECMWF. Furthermore, ECMWF has been working closely with ARM related projects for many years. ECMWF provides operational analysis data for the ARM stations (permanent and mobile) as background meteorological information and ECMWF has implemented the Rapid Radiative Transport Model long wave and short wave schemes as radiation codes in the operational system. These codes were developed at Atmospheric and Environmental Research Inc. with ARM support and were extensively evaluated using detailed ARM observations. This short report describes the history of the ARM-fellowship at ECMWF and summarizes the achievements over the last 3 years.

54 ENVIRONMENTAL SCIENCES↗

Aerosol Thermodynamics (Aerosol Liquid Water Concentration and Aerosol pH) at S2 during CoURAGE

These data report aerosol liquid water content (ALWC) and aerosol pH for the S2 (Mt. Airy) site during CoURAGE for April - June 2025. The ISORROPIA-II aerosol thermodynamic equilibrium model was used to compute ALWC and pH. The model was run in forward mode, with solids formation disabled (metastable mode), according to Pye et al. (Atmospheric Chemistry and Physics, 2020). Information about the model can be found at https://www.epfl.ch/labs/lapi/models-and-software/isorropia/, and in Fountoukis and Nenes (Atmospheric Chemistry and Physics, 2007). Inputs to the model were: (1) measured Temperature and relative humidity, both from the DoE ARM “metwxt” data products at S2, (2) aerosol chemical composition from the ARM ACSM, and (3) gas-phase ammonia concentrations. For ISORROPIA-II, ambient RH values above 0.995 were input to the model as 0.995; therefore, caution should be exercised interpreting ALWC when RH was above 0.995. Aerosol composition or NH3(g) concentrations below the LOD were input into the model as 0.5*LOD. Model runs were only conducted for data points at 30-min resolution with all three inputs (meteorology, ACSM, and NH3). If any of the three model inputs were missing, aerosol thermodynamic outputs are flagged as -999. Similarly, aerosol thermodynamic outputs are flagged as -999 if measured NH3(g) and aerosol ammonium (NH4+) were simultaneously below the respective LODs. The ALWC includes liquid water from inorganic aerosol components, calculated directly by ISORROPIA-II, as well as liquid water from organics, estimated from the ACSM organics assuming a kappa value of 0.12 according to Guo et al. (Atmospheric Chemistry and Physics, 2015).

Aerosol Liquid Water Content↗

An update to the Sandia method for creating Typical Meteorological Years from a limited pool of calendar years

Typical Meteorological Years (TMYs) are essential for the efficient evaluation of energy system performance. Ideally, 30 years of weather data are required to generate TMYs, but significantly fewer years are typically available due to practical limitations. To address this issue, an update to the Sandia method was developed, referred to as the Argonne method, to create TMYs from a limited number of years. Furthermore, this method enhances candidate diversity by systematically shifting original candidate months forward or backward by specific days, creating an expanded pool of candidates. The effectiveness of the Argonne method was validated through statistical testing, comparison of monthly average weather parameters, and numerical simulations. The results demonstrate a high probability of identifying at least one shifted month whose cumulative distribution functions of weather parameters closely align with long-term distributions. In 67 % of all comparisons, the monthly average weather parameters in TMYs generated using the Argonne method exhibit better agreement with long-term averages than TMY3. Moreover, in 74 % of the 318 building simulation cases, the Argonne method outperforms TMY3 in estimating long-term average building heating and cooling demands. Therefore, the Argonne method effectively diversifies the candidate pool and produces typical years that provide more accurate estimations of long-term averages compared to TMY3 when only a limited pool of calendar years (10 years or fewer) is available.

Building energy modeling↗

Terrestrial laser scanning data (Levels 0 and 1) from Urban Biogeochemistry Pilot Project sites, Knoxville, Tennessee, Jul 2024 - Jul 2025

This data package contains data from terrestrial laser scanning (TLS) at five urban park sites in Knoxville, Tennessee, USA. All parks include open-grown and/or closed-canopy trees and mixed nearby land use. These study sites were established as part of the Urban Biogeochemistry Pilot Project, which has an overall goal of better understanding how hydrobiogeochemical cycling is altered within the human environment. These five sites represent a gradient of urbanization, and were instrumented to understand hydrological and biogeochemical cycling (e.g., soil moisture, soil physical properties and biogeochemistry, tree transpiration, species type). The TLS data archived here were collected to provide detailed, three-dimensional information about forest structure. Specifically, data were collected to allow tree- and stand-level characterization of woody structure and leaf area. TLS scans were placed to capture the area around trees with sap flow sensors, and as much of a 50 m radius area around the meteorological station as possible given site property limits. Derived products will allow upscaling of water content and transpiration data. This data package contains the following data: - High-level files document further details of the campaign and data package: 1_CampaignSummary.csv provides details about the campaign and study site, 2_ScanAreasDetail.csv provides details about each separate scan area (groups of scans post-processed into a single point cloud), 3_TerrestrialLidarSensor.csv provides further technical details about the Riegl VZ-400i TLS sensor, TLS_CSV_dd.csv is a CSV Data Dictionary providing information about the fields in CSV files following the ESS-DIVE CSV File Formatting Guidelines Reporting Format, TLS_flmd.csv is a File Level Metadata file providing information about each file in the data package following the ESS-DIVE File Level Metadata Reporting Format, and README.txt is a text file describing the overall project and file structure. - Level 0 data are the raw data (.PROJ folders) as recorded by the Riegl VZ-400i TLS instrument before scan co-registration and post-processing with the Riegl's proprietary RiSCAN PRO software, which requires a license. - Level 1 data contain post-processed, co-registered data from each scan area. The "PointClouds" folder for each scan area contains a .las file with 1 cm resolution point cloud data exported from RiSCAN PRO. These are the main files likely to be of interest to most users and can be further processed with any software capable of manipulating .las files (e.g. Python, R CloudCompare). The "Project Information" folder contains log files from post-processing in RiSCAN PRO that may be of interest to users who want to see detailed records of post-processing, including all PDF reports generated by RiSCAN PRO. The "ScanPositions" folder contains information about the final position of all TLS scans, after post-processing, in multiple formats. The file ScanPositions_*.csv provides final geo-referenced scan positions, and the file SOP_backup_*.csv can be used in RiSCAN PRO to restore the co-registered scan positions if users wish to re-process raw data (Level 0 .PROJ folders) with RiSCAN PRO software (e.g., subsample to a different resolution, exclude a certain scan position, or apply different filters on reflectance or deviation values) without redoing time-consuming co-registration steps.

54 ENVIRONMENTAL SCIENCES↗

Parallel Multivariate Spatio-Temporal Clustering of Large Ecological Datasets on Hybrid Supercomputers

A proliferation of data from vast networks of remote sensing platforms (satellites, unmanned aircraft systems (UAS), airborne etc.), observational facilities (meteorological, eddy covariance etc.), state-of-the-art sensors, and simulation models offer unprecedented opportunities for scientific discovery. Unsupervised classification is a widely applied data mining approach to derive insights from such data. However, classification of very large data sets is a complex computational problem that requires efficient numerical algorithms and implementations on high performance computing (HPC) platforms. Additionally, increasing power, space, cooling and efficiency requirements has led to the deployment of hybrid supercomputing platforms with complex architectures and memory hierarchies like the Titan system at Oak Ridge National Laboratory. The advent of such accelerated computing architectures offers new challenges and opportunities for big data analytics in general and specifically, large scale cluster analysis in our case. Although there is an existing body of work on parallel cluster analysis, those approaches do not fully meet the needs imposed by the nature and size of our large data sets. Moreover, they had scaling limitations and were mostly limited to traditional distributed memory computing platforms. We present a parallel Multivariate Spatio-Temporal Clustering (MSTC) technique based on k-means cluster analysis that can target hybrid supercomputers like Titan. We developed a hybrid MPI, CUDA and OpenACC implementation that can utilize both CPU and GPU resources on computational nodes. We describe performance results on Titan that demonstrate the scalability and efficacy of our approach in processing large ecological data sets.

Sreepathi, Sarat↗

Precipitation Meteorological Instruments (PRECIPMET) Handbook

The PRECIPMET surface meteorology instrument system provides temperature, relative humidity, pressure, wind speed and direction, and precipitation data relevant to the precipitation network instruments: laser disdrometer (PARS2) and radar wind profiler (RWP). The PRECIPMET is installed at the intermediate facilities (IF) of the U.S. Department of Energy (DOE)’s Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) atmospheric observatory. The instrument system consists of a Vaisala WXT520 weather transmitter and a 12”-diameter Novalynx tipping bucket rain gauge (TBRG). The WXT520 is mounted on top of the control building at a height of approximately 4 meters. The tipping bucket is mounted on a pole level with the surrounding fencing (approximately 2 meters) to prevent physical interference with the gauge.

54 ENVIRONMENTAL SCIENCES↗

An Updated Global Grid Point Surface Air Temperature Anomaly Data Set: 1851-1990 (revised 1991) (NDP-020)

This NDP presents land-based monthly surface-air-temperature anomalies (departures from a 1951-1970 reference period mean) on a 5° latitude by 10° longitude global grid. Monthly surface-air-temperature anomalies (departures from a 1957-1975 reference period mean) for the Antarctic (grid points from 65°S to 85°S) are presented in a similar way as a separate data set. The data were derived primarily from the World Weather Records and from the archives of the United Kingdom Meteorological Office. This long-term record of temperature anomalies may be used in studies addressing possible greenhouse-gas-induced climate changes. To date, the data have been employed in producing regional, hemispheric, and global time series for determining whether recent (i.e., post-1900) warming trends have taken place. The present updated version of this data set is identical to the earlier version for all records from 1851-1978 except for the addition of the Antarctic surface-air-temperature anomalies beginning in 1957. Beginning with the 1979 data, this package differs from the earlier version in several ways. Erroneous data for some sites have been corrected after a review of the actual station temperature data, and inconsistencies in the representation of missing values have been removed. For some grid locations, data have been added from stations that had not contributed to the original set. Data from satellites have also been used to correct station records where large discrepancies were evident. The present package also extends the record by adding monthly surface-air-temperature anomalies for the Northern (grid points from 85°N to 0°) and Southern (grid points from 5°S to 60°S) Hemispheres for 1985-1990. In addition, this updated package presents the monthly-mean-temperature records for the individual stations that were used to produce the set of gridded anomalies. The periods of record vary by station. Northern Hemisphere data have been corrected for inhomogeneities, while Southern Hemisphere data are presented in uncorrected form.For access to the data files, click this link to the CDIAC data transition website: http://cdiac.ess-dive.lbl.gov/ndps/ndp020.html

54 ENVIRONMENTAL SCIENCES↗