Search NASA⌕ Search

SEARCH · Search NASA

Results for “Module”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Modulation and coding for satellite and space communications

Several modulation and coding advances supported by NASA are summarized. To support long-constraint-length convolutional code, a VLSI maximum-likelihood decoder, utilizing parallel processing techniques, which is being developed to decode convolutional codes of constraint length 15 and a code rate as low as 1/6 is discussed. A VLSI high-speed 8-b Reed-Solomon decoder which is being developed for advanced tracking and data relay satellite (ATDRS) applications is discussed. A 300-Mb/s modem with continuous phase modulation (CPM) and codings which is being developed for ATDRS is discussed. Trellis-coded modulation (TCM) techniques are discussed for satellite-based mobile communication applications.

Yuen, Joseph H.↗

Wideband Phase-Locked Angle Modulator

Modified configuration for phase-locked angle modulator circuit makes possible to design filters in modulating portion of circuit independently of filter in phase-locked-loop portion. Bandwidth of phase- or frequency-modulated output not limited by low-pass nature of loop filter.

Nguyen, Lim↗

Utilization of the Spacehab module as a microgravity carrier

Spacehab Incorporated has proposed the use of its mid-deck augmentation module as a near term microgravity test bed. The orbital flight dynamics and payload accommodation capabilities of a Space Shuttle with the Spacehad module were investigated to assess this proposal. It was found that the module will provide a 1 microG (32.2 x 10(exp 6) ft/sq sec) quasi-steady state environment for limited periods of time when the shuttle is actively controlled. A passively stable attitude will provide a 4 microG environment for longer periods. Shuttle imposed constraints on the composite payload center of gravity, however, severely limit the possibilities for co-manifesting additional payloads. The analysis leading to those conclusions are detailed.

Sasamoto, Washito A.↗

Algorithms for a very high speed universal noiseless coding module

The algorithmic definitions and performance characterizations are presented for a high performance adaptive coding module. Operation of at least one of these (single chip) implementations is expected to exceed 500 Mbits/s under laboratory conditions. Operation of a companion decoding module should operate at up to half the coder's rate. The module incorporates a powerful noiseless coder for Standard Form Data Sources (i.e., sources whose symbols can be represented by uncorrelated non-negative integers where the smaller integers are more likely than the larger ones). Performance close to data entropies can be expected over a Dynamic Range of from 1.5 to 12 to 14 bits/sample (depending on the implementation).

Rice, Robert F.↗

Development of a stable electro-optical modulator

The electrical/optical characteristics of longitudinal KD*P (KD2PO4) modulators were studied to determine what physical construction would be best for use in the MSFC (Marshall Space Flight Center) vector magnetograph. Obtaining high quality KD*P modulators that could withstand the DC modulation requirement of the MSFC vector magnetograph has, in the past, been at best a game of chance. A study is summarized which investigated problems that were seen in these devices and the conclusions that were reached are presented.

Abushagur, Mustafa A. G.↗

Evidence of a transverse Langmuir modulational instability in a space plasma

The auroral ionosphere Langmuir-wave electric field amplitude modulation observations presented may be accounted for by a transverse modulational instability that is resonant with lower hybrid of ion Bernstein waves. In independent observations, the modulation frequencies were near the characteristic frequencies of perpendicular modes. These data strongly suggest the need for two- or three-dimensional model descriptions of nonlinear Langmuir wave evolution in the low-beta plasma.

Ergun, R. E.↗

Cosmic ray transport - Modulation and the anomalous component

Cosmic ray transport research is reviewed for the 1987-1990 time period, focusing on diffusive transport. Problems discussed include the diffusion model, anomalous components, radial gradient and north south anisotropy, short term modulation, long-term solar modulation, and charge sign dependent modulation.

Evenson, Paul↗

On multilevel block modulation codes

The multilevel (ML) technique for combining block coding and modulation is investigated. A general formulation is presented for ML modulation codes in terms of component codes with appropriate distance measures. A specific method for constructing ML block modulation codes (MLBMCs) with interdependency among component codes is proposed. Given an MLBMC C with no interdependency among the binary component codes, the proposed method gives an MLBC C-prime that has the same rate as C, a minimum squared Euclidean distance not less than that of C, a trellis diagram with the same number of states as that of C, and a smaller number of nearest-neighbor codewords than that of C. Finally, a technique is presented for analyzing the error performance of MLBMCs for an additive white Gaussian noise channel based on soft-decision maximum-likelihood decoding.

Kasami, Tadao↗

Effect Of Phase Unbalance In Product Modulator

Paper presents theoretical study of effect of phase unbalance in product modulator of phase-modulation transmitter in deep-space telemetry system upon performance of system. Mathematical model of product modulator used to derive equations for relative strengths of desired suppressed-carrier component and undesired residual-carrier component of transmitted signal. Also addresses effects of unsuppressed-carrier component on carrier-tracking phase-locked loop and bit detector in receiver.

Nguyen, Tien M.↗

Multi-stage decoding of multi-level modulation codes

Various types of multi-stage decoding for multi-level modulation codes are investigated. It is shown that if the component codes of a multi-level modulation code and types of decoding at various stages are chosen properly, high spectral efficiency and large coding gain can be achieved with reduced decoding complexity. Particularly, it is shown that the difference in performance between the suboptimum multi-stage soft-decision maximum likelihood decoding of a modulation code and the single-stage optimum soft-decision decoding of the code is very small, only a fraction of dB loss in signal to noise ratio at a bit error rate (BER) of 10(exp -6).

Lin, Shu↗

Jitter model and signal processing techniques for pulse width modulation optical recording

A jitter model and signal processing techniques are discussed for data recovery in Pulse Width Modulation (PWM) optical recording. In PWM, information is stored through modulating sizes of sequential marks alternating in magnetic polarization or in material structure. Jitter, defined as the deviation from the original mark size in the time domain, will result in error detection if it is excessively large. A new approach is taken in data recovery by first using a high speed counter clock to convert time marks to amplitude marks, and signal processing techniques are used to minimize jitter according to the jitter model. The signal processing techniques include motor speed and intersymbol interference equalization, differential and additive detection, and differential and additive modulation.

Liu, Max M.-K.↗

Complex Burn Region Module (CBRM) update

Presented here is a Complex Burn Region Module (CBRM) update for the Solid Rocket Internal Ballistics Module (SRIBM) Program for the Advanced Solid Rocket Motor (ASRM) design/performance assessments. The goal was to develop an improved version of the solid rocket internal ballistics module program that contains a diversified complex region model for motor grain design, performance prediction, and evaluation.

Adams, Carl L.↗

NASA. Lewis Research Center Advanced Modulation and Coding Project: Introduction and overview

The Advanced Modulation and Coding Project at LeRC is sponsored by the Office of Space Science and Applications, Communications Division, Code EC, at NASA Headquarters and conducted by the Digital Systems Technology Branch of the Space Electronics Division. Advanced Modulation and Coding is one of three focused technology development projects within the branch's overall Processing and Switching Program. The program consists of industry contracts for developing proof-of-concept (POC) and demonstration model hardware, university grants for analyzing advanced techniques, and in-house integration and testing of performance verification and systems evaluation. The Advanced Modulation and Coding Project is broken into five elements: (1) bandwidth- and power-efficient modems; (2) high-speed codecs; (3) digital modems; (4) multichannel demodulators; and (5) very high-data-rate modems. At least one contract and one grant were awarded for each element.

Budinger, James M.↗

The measurement system of pulse modulated carrier frequency stability and timing jitter

The definition of pulse modulated carrier frequency stability and timing jitter as well as the configuration and synchronous acquisition measurement method of its measurement system. Frequency stability of the pulse modulated carrier is measured with a discrimination technique. The pulse modulated carrier under testing is mixed with a reference frequency synthesizer. A delay line is used to convert the frequency fluctuation mixed IF signal to the voltage fluctuation. The system has the capability to make the phase noise measurement of two port devices on a pulsed carrier using a phase bridge. The noise voltage mentioned above is applied to the data acquisition and processing unit by PC to realize stability measurement. The data acquisition is in the form of pulse synchronization so that the measurement system accuracy is increased. The pulse width is more than 0.3 microseconds. The phase fluctuation variance, sigma, is less than 0.017. The time interval measuring system with high resolution is used to make interpulse timing and pulse width jitters automatic measurement. The pulse width is less than 0.2 ns. The resolution is 0.1 ns. The system is successfully applied to radar measurement.

Li Cheng-Fu↗

Convective stability in the Rayleigh-Benard and directional solidification problems - High-frequency gravity modulation

The effect of vertical, sinusoidal, time-dependent gravitational acceleration on the onset of solutal convection during directional solidification is analyzed in the limit of large modulation frequency. When the unmodulated state is unstable, the modulation amplitude required to stabilize the system is determined by the method of averaging. When the unmodulated state is stable, resonant modes of instability occur at large modulation amplitude. These are analyzed using matched asymptotic expansions to elucidate the boundary-layer structure for both the Rayleigh-Benard and directional solidification configurations. Based on these analyses, a thorough examination of the dependence of the stability criteria on the unmodulated Rayleigh number, Schmidt number, and distribution coefficient, is carried out.

Wheeler, A. A.↗

Modulation for terrestrial broadcasting of digital HDTV

The digital modulation methods used by the DigiCipher, DSC-HDTV, ADTV, and ATVA-P digital high-definition television (HDTV) systems are discussed. Three of the systems use a quadrature amplitude modulation method, and the fourth uses a vestigial sideband modulation method. The channel equalization and spectrum sharing of the digital HDTV systems is discussed.

Kohn, Elliott S.↗

The simulated features of heliospheric cosmic-ray modulation with a time-dependent drift model. I - General effects of the changing neutral sheet over the period 1985-1990

A time-dependent drift model is used to simulate the heliospheric modulation of galactic cosmic rays, with emphasis on the effects of the wavy heliospheric neutral sheet (HNS) as a function of time during the period 1985-1990. The model predicted a clearly defined time difference between the time when minimum modulation occurred at earth and at radial distances farther away from the sun, indicating that the HNS plays an important part in establishing this observed time delay. The movements of the Voyager 1 and 2 and Pioneer 10 spacecraft were simulated in order to calculate instantaneous radial and latitudinal gradients. The time dependencies of these gradients were found to follow the observations well. The model study indicates that the HNS cannot be ignored, especially during periods of low to moderate solar activity, when the modulation of cosmic rays is described.

Potgieter, M. S.↗

Intensity variations in the interplanetary magnetic field measured by Voyager 2 and the 11-year solar cycle modulation of galactic cosmic rays

New evidence is presented to support the hypothesis that the 11-yr solar cycle modulation of galactic cosmic rays is caused by strong diffusion inside long-lived merged interaction regions. To test this hypothesis, the 1D force-field approximation of the cosmic ray modulation equation is solved. It is assumed that a constant solar wind speed convects magnetic field compressions and rarefactions unchanged through a model heliosphere. The result is a reasonable simulation of the integrated high-energy cosmic ray intensity profile from about 1982 to mid-1989. This period encompasses both the full recovery portion of the last profile from about 1982 to mid-1989. This model responds to the Voyager 2 magnetic field data by correctly timing the beginning of the new modulation cycle in late 1987. It is concluded that the present hypothesis is consistent with the results of this simulation.

Perko, J. S.↗