SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Brazing effective technique for joining ordinary structural metals to brittle, low-thermal-expansion refractory metals. Specifically, brazing process established for joining copper or nickel flanges to ends of vacuum-plasma-sprayed tungsten tubes and for joining stainless-steel flanges to ends of tubes made of alloy of molybdenum with 40 percent of rhenium.
Since the first plasma realized in 2020, a series of key systems on HL-3 (known as HL-2M before) tokamak have been equipped/upgraded, including in-vessel components (the first wall, lower divertor, and toroidal cryogenic/water-cooling/baking/glow discharge systems, etc.), auxiliary heating system of 11 MW, and 28 diagnostic systems (to measure the plasma density, electron temperature, radiation, magnetic field, etc.). Magnet field systems were commissioned firstly for divertor plasma discharges. During the 2nd experimental campaign of HL-3 tokamak, several great progresses have been achieved. Firstly, the successful operation with plasma current larger than 1 MA was achieved under a divertor configuration. Secondly, the advanced divertor concept with two distinct snowflake configurations was realized. It is found that the distribution of ion saturation current and heat flux on bottom plate becomes wide due to magnetic surface expansion, demonstrating the advantage of such configuration in the heat flux mitigation. In addition, using the combination of NBI, ECRH and LHCD, the standard sawtoothing high confinement mode of megampere plasma was firstly accessed on the HL-3. The successful commissioning of HL-3 is beneficial for the initial operation of ITER.
The investigation of substorm effects in the inner magnetosphere with CRRES data looked in detail at over 50 substorms relative to signatures of onset and early expansion phases. The accomplishments of the project are: Determined perpendicular Poynting flux at CRRES in the inner magnetosphere at substorm onset, including primary direction is azimuthal, not radial, indicating a local source, no obvious signal from the magnetotail to trigger onset, strongly supports substorm onset location near the inner edge of the plasma sheet and process is local and a strong function of Magnetosphere-ionosphere (MI) coupling. We also developed near geosynchronous onset (NGO) model for substorm onset and expansion.
We report that resonant three-wave coupling is an important mechanism via which waves interact in a nonlinear medium. When the medium is a magnetized warm-fluid plasma, a previously unknown formula for the coupling coefficients is derived by solving the fluid-Maxwell's equations to second order using multiscale perturbative expansions. The formula is not only general but also evaluable, whereby numerical values of the coupling coefficient can be determined for any three resonantly interacting waves propagating at arbitrary angles. To illustrate how the general formula can be applied, coupling coefficient governing laser scattering is evaluated as one example. In conditions relevant to magnetized inertial confinement fusion, Raman and Brillouin instabilities are replaced by scattering from magnetized plasma waves when lasers propagate at oblique angles. As another example, coupling coefficient between two Alfvén waves via a sound wave is evaluated. Lastly, in conditions relevant to solar corona, the decay of a parallel Alfvén wave only slightly prefers exact backward geometry.
We describe a new model for the study of weakly collisional, magnetised plasmas derived from exploiting the separation of the dynamics parallel and perpendicular to the magnetic field. This unique system of equations retains the particle dynamics parallel to the magnetic field while approximating the perpendicular dynamics through a spectral expansion in the perpendicular degrees of freedom, analogous to moment-based fluid approaches. In so doing, a hybrid approach is obtained that is computationally efficient enough to allow for larger-scale modelling of plasma systems while eliminating a source of difficulty in deriving fluid equations applicable to magnetised plasmas. We connect this system of equations to historical asymptotic models and discuss advantages and disadvantages of this approach, including the extension of this parallel-kinetic-perpendicular moment beyond the typical region of validity of these more traditional asymptotic models. This paper forms the first of a multi-part series on this new model, covering the theory and derivation, alongside demonstration benchmarks of this approach that include shocks and magnetic reconnection.
The equations of gas dynamics are extensively used to describe atmospheric loss from solar system bodies and exoplanets even though the boundary conditions at infinity are not uniquely defined. Using molecular-kinetic simulations that correctly treat the transition from the continuum to the rarefied region, we confirm that the energy-limited escape approximation is valid when adiabatic expansion is the dominant cooling process. However, this does not imply that the outflow goes sonic. Rather large escape rates and concomitant adiabatic cooling can produce atmospheres with subsonic flow that are highly extended. Since this affects the heating rate of the upper atmosphere and the interaction with external fields and plasmas, we give a criterion for estimating when the outflow goes transonic in the continuum region. This is applied to early terrestrial atmospheres, exoplanet atmospheres, and the atmosphere of the ex-planet, Pluto, all of which have large escape rates.
Abstract In this paper we present a high repetition rate experimental platform for examining the spatial structure and evolution of Biermann-generated magnetic fields in laser-produced plasmas. We have extended the work of prior experiments, which spanned over millimeter scales, by spatially measuring magnetic fields in multiple planes on centimeter scales over thousands of laser shots. Measurements with magnetic flux probes show azimuthally symmetric magnetic fields that range from 60 G at 0.7 cm from the target to 7 G at 4.2 cm from the target. The expansion rate of the magnetic fields and evolution of current density structures are also mapped and examined. Electron temperature and density of the laser-produced plasma are measured with optical Thomson scattering and used to directly calculate a magnetic Reynolds number of $1.4\times {10}^4$ , confirming that magnetic advection is dominant at $\ge 1.5$ cm from the target surface. The results are compared to FLASH simulations, which show qualitative agreement with the data.
The impact of a large cosmic body with typical size R approximately = 1 km (mass M approximately = 4-10 Gt for a stony or icy body) moving with velocity V approximately = 50-70 km/s (kinetic energy of the order of 10 exp 21 J or 10 exp 6 Mt of TMT) on the Earth's surface leads to a full vaporization of a body and of a significant part of substance of the upper layers of the Earth and even to the ionization of this vapor cloud. As a result, a hypersonic jet of air and erosion plasma is formed. The kinetic energy E sub J is far above the total energy of the geomagnetic field of the Earth (approximately equivalent to the energy of 100 Mt) and the total mass of a fast-moving part of the jet M sub j approximately = 10 exp 12 kg is far above the mass of atmosphere in the jet expansion cone. Thus, the jet will propagate practically inertially with the constant mean velocity U approximately = 10-20 km/s and even higher. The interaction of this plasma jet with the Earth's magnetic field causes magnetodynamic effects similar to those which are produced by cosmic nuclear explosions but of a larger scale. The preliminary results of experimental and numerical modeling of the plasma jet-magnetosphere interaction are presented.
We propose a spectral method for the 1D-1V Vlasov–Poisson system where the discretization in velocity space is based on asymmetrically-weighted Hermite functions, dynamically adapted via a scaling α and shifting u of the velocity variable. Specifically, at each time instant an adaptivity criterion selects new values of α and u based on the numerical solution of the discrete Vlasov–Poisson system obtained at that time step. Once the new values of the Hermite parameters α and u are fixed, the Hermite expansion is updated and the discrete system is further evolved for the next time step. The procedure is applied iteratively over the desired temporal interval. The key aspects of the adaptive algorithm are: the map between approximation spaces associated with different values of the Hermite parameters that preserves total mass, momentum and energy; and the adaptivity criterion to update α and u based on physics considerations relating the Hermite parameters to the average velocity and temperature of each plasma species. For the discretization of the spatial coordinate, we rely on Fourier functions and use the implicit midpoint rule for time stepping. The resulting numerical method possesses intrinsically the property of fluid-kinetic coupling, where the low-order terms of the expansion are akin to the fluid moments of a macroscopic description of the plasma, while kinetic physics is retained by adding more spectral terms. Moreover, the scheme features conservation of total mass, momentum and energy associated in the discrete, for periodic boundary conditions. A set of numerical experiments confirms that the adaptive method outperforms the non-adaptive one in terms of accuracy and stability of the numerical solution.
When a dense plasma consisting of a cold and a sufficiently warm electron population expands, a rarefaction shock forms [Bezzerides et al., 1978]. In the expansion of the polar wind in the magnetosphere, it has been previously shown that when a sufficiently warm electron population also exists, in addition to the usual cold ionospheric one, a discontinuity forms in the electrostatic potential distribution along the magnetic field lines [Barakat and Schunk, 1984]. Despite the lack of spatial resolution and the assumption of quasi-neutrality in the polar wind models, such discontinuities have been called double layers (DLs). Recently similar discontinuities have been invoked to partly explain the auroral acceleration of electrons and ions in the upward current region [Ergun et al., 2000]. By means of one-dimensional Vlasov simulations of expanding plasmas, for the first time we make here the connection between (1) the rarefaction shocks, (2) the discontinuities in the potential distributions, and (3) DLs. We show that when plasmas expand from opposite directions into a deep density cavity with a potential drop across it and when the plasma on the high-potential side contains hot and cold electron populations, the temporal evolution of the potential and the plasma distribution generates evolving multiple double layers with an ,extended density cavity between them. One of the DLs is the rarefaction-shock (RFS) and it forms by the reflections of the cold electrons coming from the high-potential side; it supports a part of the potential drop approximately determined by the hot electron temperature. The other DLs evolve from charge separations arising either from reflection of ions coming from the low-potential side or stemming from plasma instabilities; they support the rest of the potential drop. The instabilities forming these additional double layers involve electron-ion (e-i) Buneman or ion-ion (i-i) two-stream interactions. The electron-electron two-stream interactions on the high-potential side of the RFS generate electron-acoustic waves, which evolve into electron phase-space holes. The ion population originating from the low-potential side and trapped by the RFS is energized by the e-i and i-i instabilities and it eventually precipitates into the high-potential plasma along with an electron beam. Applications of these findings to the auroral plasma physics are discussed.
We develop a model for laser propagation and heating in a subcritical foam (homogeneous electron density as a fraction of critical n e,0 /n c <1). Our model describes the partition of energy between ions and electrons in an expanding foam element irradiated by a laser, and we solve for the plasma conditions generated by burning down the foam microstructure. We find that a substantial fraction of laser energy goes into breaking down and homogenizing the foam microstructure, which slows down the laser heat front. We also find that the ion temperature in a plasma generated by burning down a foam can exceed the electron temperature. This is because laser energy is deposited into the expansion kinetic energy of ions as the foam microstructure burns down explosively. The higher ion temperature increases ion-acoustic wave damping which reduces stimulated Brillouin scattering (SBS). We test our model against data from an experiment that shot a subcritical foam with a high intensity laser pulse on the Janus laser facility at LLNL. We find that by modeling the effect of the foam microstructure, we can explain both the experimentally measured laser propagation velocity and the backscattered SBS power.
We consider the evolution of electromagnetic fields coupled to conduction currents during the reheating era after inflation, and prior to the establishing of the proton-electron plasma. We assume that the currents may be described by second order causal hydrodynamics. The resulting theory is not conformally invariant. The expansion of the Universe produces temperature gradients which couple to the current and generally oppose Ohmic dissipation. Although the effect is not strong, it suggests that the unfolding of hydrodynamic instabilities in these models may follow a different pattern than in first order theories, and even than in second order theories on non expanding backgrounds.
The object was to conduct large scale simulations of electron beams injected into space. The study of active injection of electron beams from spacecraft is important since it provides valuable insight into beam-plasma interactions and the development of current systems in the ionosphere. However, the beam injection itself is not simple, being constrained by the ability of the spacecraft to draw return current from the ambient plasma. The generation of these return currents is dependent on several factors, including the density of the ambient plasma relative to the beam density, the presence of neutrals around the spacecraft, the configuration of the spacecraft, and the motion of the spacecraft through the plasma. Two dimensional particle simulations with collisional processes included are used to show how these different and often coupled processes can be utilized to enhance beam propagation from the spacecraft. To understand the radical expansion of mechanism of an electron beam from a highly charged spacecraft, two dimensional particle in cell simulations were conducted for a high density electron beam injected parallel to magnetic fields from an isolated equipotential conductor into a cold background plasma. The simulations indicate that charge buildup at the beam stagnation point causes the beam to expand radially to the beam electron gyroradius.
The design of high-current density magnetically insulated transmission line (MITL) is a difficult problem of current large-scale Z-pinch device. In particular, a thorough understanding of the MITL electrode surface evolution process under high current density is lacking. On the “QiangGuang-I” accelerator, the load area possesses a low inductance short-circuit structure with a diameter of 2.85 mm at the cathode, and three reflux columns with a diameter of 3 mm and uniformly distributed circumference at the anode. The length of the high density MITL area is 20 mm. A laser interferometer is used to assess and analyze the state of the MITL cathode and anode gap, and their evolution process under high current density. Experimental results indicate that evident current loss is not observed in the current density area at pulse leading edge, and peak when the surface current density reaches MA/cm. Analysis on electrode surface working conditions indicates that when the current leading edge is at 71.5% of the peak, the total evaporation of MITL cathode structure can be realized by energy deposition caused by ohmic heating. The electrode state changes, and diffusion conditions are reflected in the laser interferometer image. The MITL cathode area mainly exists in metal vapor form. The metal vapor density in the cathode central region is higher than the upper limit of laser penetration density (∼4 × 10{sup 21}/cm{sup 3}), with an expansion velocity of ∼0.96 km/s. The metal vapor density in the electrode outer area may lead to evident distortion of fringes, and its expansion velocity is faster than that in the center area (1.53 km/s).
Balmer-α light emission from the extraction region of the LHD one-third ion source has shown a characteristic Doppler broadening in the wavelength spectrum detected by a high resolution spectrometer. The spectrum resembles Gaussian distribution near the wavelength of the intensity peak, while it has an additional component of a broader foot. The measured broadening near the wavelength of the intensity peak corresponds to 0.6 eV hydrogen atom temperature. The spectrum exhibits a larger expansion in the blue wing which becomes smaller when the line of sight is tilted toward the driver region from the original observation axis parallel to the plasma grid. A surface collision simulation model predicts the possibility of hydrogen reflection at the plasma grid surface to form a broad Balmer-α light emission spectrum.
A non-equilibrium model for laser-generated plasmas is used to represent collinear dual nano-second-pulse interactions. In the specific case considered, the breakdown is initiated with an ultraviolet (UV) laser pulse at 266 nm, which pre-ionizes the gas, and it is followed by a near-infrared (NIR) pulse at 1064 nm, which deposits significant energy into the ionized mixture. The model is validated against corresponding experiments, and simulation results are interrogated to understand key features of the plasma-kernel dynamics and the post-discharge hydrodynamics. The hydrodynamics of the non-equilibrium plasma is governed by the two-temperature Navier–Stokes equations accounting for both multiphoton ionization and inverse bremsstrahlung. The interaction between the laser beam and the plasma is modeled based on the radiative transfer equation. The temporal and spatial offsets of the two pulses can generate ionization kernels with different topology and dynamics. It is shown that the UV pre-ionization pulse can tailor the plasma region, leading to a larger ionized volume than would occur for a single-pulse breakdown, and it increases the efficiency of the energy deposition for the following NIR discharge. Vorticity in the early post-discharge phase is generated via baroclinic torque from the misalignment of the radial gradient of density (sudden gas expansion) and the strong pressure gradient (initiated by energy deposition from the laser beam). It is predicted that the collinear dual pulse can be designed to specify the plasma kernel size, shape, and maximum temperature in the breakdown phase, and the initial post-breakdown vorticity and plasma-core decay.
The proposed Shuttle-based short tether experiments with hollow cathodes have the potential for providing important data that will not be obtained in long tether experiments. A critical property for hollow cathode effectiveness as a plasma contactor is the cross magnetic field conductivity of the emitted plasma. The different effects of hollow cathode cloud overlap in the cases of motion-driven and battery-driven operation are emphasized. The calculations presented on the size and shape of the hollow cathode cloud improve the qualitative picture of hollow cathodes in low Earth orbit and provide estimates of time constants for establishing the fully-expanded cloud. The magnetic boundary value problem calculations indicate the way in which the magnetic field will effect the shape of the cloud by resisting expansion in the direction perpendicular to the field. The large-scale interactions of the system were also considered. It was concluded that recent plasma chamber experiments by Stenzel and Urrutia do not model an electrodynamic tether well enough to apply the results to tethered system behavior. Orbiting short tether experiments on hollow cathodes will provide critical information on hollow cathode performance and the underlying physics that cannot be obtained any other way. Experiments should be conducted as soon as funding and a suitable space vehicle are available.
Ulysses observations have revealed a new class of forward-reverse shock pairs in the solar wind that appears to be restricted to high heliographic latitudes. Shock pairs in this new class of events are produced by over-expansion (i.e., expansion driven by a high internal pressure) of coronal mass ejections, CMEs, that have speeds comparable to that of the surrounding solar wind plasma. Here we compare low- and high-latitude observations of an event observed both near Earth by IMP 8 and at high latitudes by Ulysses. At the time of these observations Ulysses was at 3.53 AU and was situated 47.2 deg south and 11.4 deg west of Earth (in the sense of planetary motion about the Sun). A fast CME that departed from the Sun on February 20, 1994 produced both a major (forward) shock wave disturbance in the ecliptic plane at 1 AU (and a large geomagnetic storm) and a forward reverse shock pair associated with over-expansion of the CME at high heliographic latitudes. The combined measurements provide a graphic illustration of how the same fast CME can produce totally different types of disturbances at low and high latitudes. Differences in the disturbances generated by the CME at high and low latitudes are due primarily to the different speeds initially prevailing in the ambient solar wind ahead of it. These observations are consistent with the results of simple numerical simulations of the event.