Search NASA⌕ Search

SEARCH · Search NASA

Results for “Repeatability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

The global context of the 14 November 2012 storm event

From 2 to 5 UT on 14 November 2012, the Van Allen Probes observed repeated particle flux dropouts during the main phase of a geomagnetic storm as the satellites traversed the post-midnight to dawnside inner magnetosphere. Each flux dropout corresponded to an abrupt change in the magnetic topology, i.e., from a more dipolar configuration to a configuration with magnetic field lines stretched in the dawn-dusk direction. Geosynchronous GOES spacecraft located in the dusk and near-midnight sectors and the LANL constellation with wide local time coverage also observed repeated flux dropouts and stretched field lines with similar occurrence patterns to those of the Van Allen Probe events. THEMIS recorded multiple transient abrupt expansions of the evening-side magnetopause ~20–30 min prior to the sequential Van Allen Probes observations. Ground-based magnetograms and all sky images demonstrate repeatable features in conjunction with the dropouts. We combine the various in-situ and ground-based measurements to define and understand the global spatiotemporal features associated with the dropouts observed by the Van Allen Probes. We discuss various proposed hypotheses for the mechanism that plausibly caused this storm-time dropout event as well as formulate a new hypothesis that explains the combined in-situ and ground-based observations: the earthward motion of magnetic flux ropes containing lobe plasmas that form along an extended magnetotail reconnection line in the near-Earth plasma sheet.

79 ASTRONOMY AND ASTROPHYSICS↗

The Intrinsic Mechanochemical Reactivity of Vinyl‐Addition Polynorbornene

Abstract Herein we report the discovery of the intrinsic mechanochemical reactivity of vinyl‐addition polynorbornene (VA‐PNB), which has strained bicyclic ring repeat units along the polymer backbone. VA‐PNBs with three different side chains were found to undergo ring‐opening olefination upon sonication in dilute solutions. The sonicated polymers exhibited spectroscopic signatures consistent with conversion of the bicyclic norbornane repeat units into the ring‐open isomer typical of polynorbornene made by ring‐opening metathesis polymerization (ROMP‐PNB). Thermal analysis and evaluation of chain‐scission kinetics suggest that sonication of VA‐PNB results in chain segments containing a statistical mixture of vinyl‐added and ROMP‐type repeat units.

Lee, Daniel C.↗

The Intrinsic Mechanochemical Reactivity of Vinyl-Addition Polynorbornene

In this paper we report the discovery of the intrinsic mechanochemical activity of vinyl-addition polynorbornene (VA-PNB), which has strained bicyclic ring repeat units along the polymer backbone. VA-PNBs with three different side chains were found to undergo ring-opening olefination upon sonication in dilute solutions. The sonicated polymers exhibited spectroscopic signatures consistent with conversion of the bicyclic norbornane repeat units to the ring-open isomer typical of polynorbornene made by ring-opening metathesis polymerization (ROMP-PNB). Thermal analysis and evaluation of chain scission kinetics suggest that sonication of VA-PNB results in chain segments containing a statistical mixture of vinyl-added and ROMP-type repeat units.

36 MATERIALS SCIENCE↗

Structures of the autoproteolytic domain from the Saccharomyces cerevisiae nuclear pore complex component, Nup145

Nuclear pore complexes (NPCs) are large, octagonally symmetric dynamic macromolecular assemblies responsible for exchange of proteins and RNAs between the nucleus and cytoplasm. NPCs are made up of at least 456 polypeptides from {approx}30 distinct nucleoporins. Several of these components, sharing similar structural motifs, form stable subcomplexes that form a coaxial structure containing two outer rings (the nuclear and cytoplasmic rings), two inner rings, and a membrane ring. The yeast (Saccharomyces cerevisiae) Nup145 and its human counterpart are unique among the nucleoporins, in that they undergo autoproteolysis to generate functionally distinct proteins. The human counterpart of Nup145 is expressed as two alternatively spliced mRNA transcripts. The larger 190 kDa precursor undergoes post-translational autoproteolysis at the Phe863-Ser864 peptide bond yielding the 92 kDa Nup98 and the 96 kDa Nup96. The smaller 98 kDa precursor is also autoproteolysed at an analogous site giving 92 kDa Nup98-N and a 6 kDa C-terminal fragment, which may form a noncovalent complex. The yeast Nup145 precursor [Fig. 1(A)] contains twelve repeats of a 'GLFG' peptide motif (FG repeats) at its N-terminus, an internal autoproteolytic domain (a region of high conservation with the homologous yeast nucleoporins Nup110 and Nup116, neither of which undergo autoproteolysis), followed by the C-terminal domain. Various forms of the FG repeats are present in nearly half of all nucleoporins; they form intrinsically disordered regions implicated in gating mechanisms that control passage of macromolecules through NPCs. Nup145 undergoes autoproteolysis at the Phe605-Ser606 peptide bond to generate two functionally distinct proteins, Nup145N and Nup145C. Subsequently, Nup145C associates with six other proteins to form the heptameric Y-complex, a component of the outer rings of the NPC. Nup145N, on the other hand, can shuttle between the NPC and the nuclear interior. It has been suggested that Nup145N, by analogy with Nup98, carries RNA between the nucleus and the NPC. Nup145 belongs to a highly conserved family of homologs found throughout eukarya. Curiously, the Phe-Ser autoproteolytic site is not always conserved, resulting in the absence of autoproteolysis for some of these closely related proteins. Our structural understanding of NPC function has benefited recently from X-ray crystal structures of segments of individual proteins. As a part of ongoing efforts at the New York SGX Research Center for Structural Genomics (www.nysgxrc.org) to determine crystal structures of distinct components of the yeast NPC, we report herein structures of Nup145N residues 443-605 [Nup145N(443-605)] from the larger autoproteolytic segment. The monomeric architecture of Nup145N(443-605) is similar to that of the autoproteolytic domain of human Nup98-N and the homologous domain of Nup116. In contrast, Nup145N(443-605) and Nup98-N show different modes of association in the crystalline state. Results of Small Angle X-ray Scattering (SAXS) in solution are consistent with the head-to-tail dimer of Nup145N(443-605), observed in two different crystal forms.

59 BASIC BIOLOGICAL SCIENCES↗

Using the red chromatic coordinate to characterize the phenology of forest canopy photosynthesis

Vegetation phenology has received increasing attention in climate change research. Near-surface sensing using digital repeat photography has proven to be useful for ecosystem-scale monitoring of vegetation phenology. However, our understanding of the link between phenological metrics derived from digital repeat photography and the phenology of forest canopy photosynthesis is still incomplete, especially for evergreen plant species. Using 49 site-years of digital images from the PhenoCam Network from eight evergreen needleleaf forest (ENF) and six deciduous broadleaf forest (DBF) sites in North America, we explored the potential of the green chromatic (GCC) and red chromatic coordinates (RCC) in tracking forest canopy photosynthesis by comparing camera-derived start- and end-of-growing season (SOS and EOS, respectively) with corresponding estimates derived from eddy covariance-derived daily gross primary productivity (GPP). We found that for DBF sites, both GCC and RCC performed comparable in capturing SOS and EOS. However, similar to earlier studies, GCC had limited potential in capturing GPP-based SOS or EOS for ENF sites. In contrast, we found RCC was a better predictor of both GPP-based SOS and EOS for ENF sites. Environmental and ecological explanations were both provided that phenological transitions derived from RCC were highly correlated with spring and autumn meteorological conditions, as well as having overall higher correlations with phenology based on LAI, a critical variable for describing canopy development. Our results demonstrate that RCC is an underappreciated metric for tracking vegetation phenology, especially for ENF sites where GCC failed to provide reliable estimates for GPP-based SOS or EOS. Our results improve confidence in using digital repeat photography to characterize the phenology of canopy photosynthesis across forest types.

54 ENVIRONMENTAL SCIENCES↗

Response of soil nutrient pools and microbiomes to recurrent wildfire disturbance and varying burn severities in a mixed conifer forest

Wildfire is a pervasive disturbance in mixed-conifer forests, yet the relative influence of fire recurrence versus burn severity on soil biogeochemistry and microbial communities remains poorly quantified. We examined a natural gradient of fire history (0–3 prior fires) and burn severity (low–high) spanning 50 yr in a mixed-conifer ecosystem to assess how repeated fire shapes soil carbon (C) and nitrogen (N) pools, their isotopic signatures, mineral and particulate fractions, microbial community composition, carbon-use, CO₂ fluxes, and vegetation cover. Successive fires produced progressively higher bare-ground percentages and lower tree cover, which were tightly linked to declines in microbial diversity and reductions bulk %C, and %N. δ 13 C increased with fire frequency, indicating preferential loss of labile C through combustion or enhanced microbial oxidation, thereby explaining the observed net soil-C decline. Conversely, δ 15 N decreased and pH increased as tree density declined, reflecting altered N cycling and reduced acidification in post-fire soils. Fire recurrence, more than severity, corresponded with a marked shift in the bacterial community: for example, Xanthobacteraceae—key N-fixers and C-cyclers—diminished, while N-fixing Bacillaceae increased, underscoring the tightly coupled nature of soil nutrient dynamics and microbiome composition after repeated burns. Our results demonstrate that fire recurrence appears to be a stronger driver of post-fire soil ecosystem responses in this mixed-conifer forest, influencing both abiotic nutrient pools and the functional potential of the soil microbiome. These findings provide a more enhanced assessment and understanding to date of the biogeochemical consequences of repeated wildfire disturbance that can be used to inform management strategies aimed at preserving soil health in fire-prone landscapes.

54 ENVIRONMENTAL SCIENCES↗

Anks3 alters the sub-cellular localization of the Nek7 kinase

Nephronophthisis (NPH) is an autosomal recessive cystic kidney disease, and a frequent cause of end-stage renal failure in children. To date, 17 NPH-associated gene products (NPHPs) have been identified. Most NPHPs participate in large multi-protein complexes that localize to the cilium and/or basal body; however, the precise composition of these complexes and their biological function remain largely unknown. We recently observed that the ankyrin repeat protein Anks3 interacts with the NPH family member Anks6. Both Anks3 and Anks6 form complexes with multiple other NPHPs, suggesting that both proteins function in similar or overlapping signaling pathways. Here, we show that Anks3, but not Anks6 interacted with the NIMA-related kinase Nek7, and was heavily modified in the presence of Nek7, resulting in an approximately 20 kD increase in molecular weight. Although mass spectrometry revealed increased serine and threonine phosphorylation of Anks3 primarily within the N-terminal ankyrin repeats also required for Nek7 interaction, the molecular weight increase occurred even in the presence of a kinase-dead Nek7 mutant, indicating that this modification was not caused by Nek7-dependent Anks3 phosphorylation. Furthermore, the Anks3 modification was specific for Nek7, and did not occur in the presence of Nek8. Importantly, Anks3 retained Nek7 in the cytoplasm, suggesting that, Nek7 triggers the modification of Anks3, which in turn prevents the nuclear localization of Nek7. - Highlights: • Anks3 interacted with Nek7 kinase, and was heavily modified in the presence of Nek7. • Anks3 N-terminal ankyrin repeats, but not SAM domain required for Nek7 interaction. • Nek7 increased Ser/Thr phosphorylation of Anks3 primarily within ankyrin domain. • Interaction with Anks3 led to cytoplasmic retention and nuclear exclusion of Nek7.

60 APPLIED LIFE SCIENCES↗

Structural Basis and Sequence Rules for Substrate Recognition by Tankyrase Explain the Basis for Cherubism Disease

The poly(ADP-ribose)polymerases Tankyrase 1/2 (TNKS/TNKS2) catalyze the covalent linkage of ADP-ribose polymer chains onto target proteins, regulating their ubiquitylation, stability, and function. Dysregulation of substrate recognition by Tankyrases underlies the human disease cherubism. Tankyrases recruit specific motifs (often called RxxPDG hexapeptides) in their substrates via an N-terminal region of ankyrin repeats. These ankyrin repeats form five domains termed ankyrin repeat clusters (ARCs), each predicted to bind substrate. Here we report crystal structures of a representative ARC of TNKS2 bound to targeting peptides from six substrates. Using a solution-based peptide library screen, we derive a rule-based consensus for Tankyrase substrates common to four functionally conserved ARCs. This 8-residue consensus allows us to rationalize all known Tankyrase substrates and explains the basis for cherubism-causing mutations in the Tankyrase substrate 3BP2. Structural and sequence information allows us to also predict and validate other Tankyrase targets, including Disc1, Striatin, Fat4, RAD54, BCR, and MERIT40.

59 BASIC BIOLOGICAL SCIENCES↗

Wi-Fi is an important threat to human health

Highlights: • 7 effects have each been repeatedly reported following Wi-Fi & other EMF exposures. • Established Wi-Fi effects, include apoptosis, oxidat. stress &: • testis/sperm dysfunct; Neuropsych; DNA impact; hormone change; Ca2+ rise. • Wi-Fi is thought to act via voltage-gated calcium channel activation. • One claim of no Wi-Fi effects was found to be deeply flawed. Repeated Wi-Fi studies show that Wi-Fi causes oxidative stress, sperm/testicular damage, neuropsychiatric effects including EEG changes, apoptosis, cellular DNA damage, endocrine changes, and calcium overload. Each of these effects are also caused by exposures to other microwave frequency EMFs, with each such effect being documented in from 10 to 16 reviews. Therefore, each of these seven EMF effects are established effects of Wi-Fi and of other microwave frequency EMFs. Each of these seven is also produced by downstream effects of the main action of such EMFs, voltage-gated calcium channel (VGCC) activation. While VGCC activation via EMF interaction with the VGCC voltage sensor seems to be the predominant mechanism of action of EMFs, other mechanisms appear to have minor roles. Minor roles include activation of other voltage-gated ion channels, calcium cyclotron resonance and the geomagnetic magnetoreception mechanism. Five properties of non-thermal EMF effects are discussed. These are that pulsed EMFs are, in most cases, more active than are non-pulsed EMFs; artificial EMFs are polarized and such polarized EMFs are much more active than non-polarized EMFs; dose-response curves are non-linear and non-monotone; EMF effects are often cumulative; and EMFs may impact young people more than adults. These general findings and data presented earlier on Wi-Fi effects were used to assess the Foster and Moulder (F&M) review of Wi-Fi. The F&M study claimed that there were seven important studies of Wi-Fi that each showed no effect. However, none of these were Wi-Fi studies, with each differing from genuine Wi-Fi in three distinct ways. F&M could, at most conclude that there was no statistically significant evidence of an effect. The tiny numbers studied in each of these seven F&M-linked studies show that each of them lack power to make any substantive conclusions. In conclusion, there are seven repeatedly found Wi-Fi effects which have also been shown to be caused by other similar EMF exposures. Each of the seven should be considered, therefore, as established effects of Wi-Fi.

54 ENVIRONMENTAL SCIENCES↗

Stability of Markers Used for Real-Time Tumor Tracking After Percutaneous Intrapulmonary Placement

Purpose: To determine the stability of markers used for real-time tumor tracking after percutaneous intrapulmonary placement. Methods and Materials: A total of 42 patients with 44 lesions, 111 markers, and {>=}2 repeat computed tomography (CT) scans were studied. The tumor on the repeat CT scans was registered with the tumor on the planning CT scan. Next, the three-dimensional marker coordinates were determined on the planning CT scan and repeat CT scans. Marker stability was analyzed by the displacement of the markers and the displacement of the center of mass (COM) of the marker configurations. In addition, we assessed the reliability of using the intermarker distance as a check for displacements in the COM of the marker configurations. Results: The median marker displacement was 1.3 mm (range, 0.1-53.6). The marker displacement was >5 mm in 12% of the markers and >10 mm in 5% of the markers. The causes of marker displacement >5 mm included marker migration (2 of 13) and target volume changes (5 of 13). Nonsynchronous tumor and marker movement during breathing might have been responsible for the displacements >5 mm in the other 6 of 13 markers. The median displacement in the COM of the marker configurations was 1.0 mm (range, 0.1-23.3). Displacements in the COM of the marker configurations of {>=}2.0 mm were detected by changes in the intermarker distance of >1.5 mm in 96% of the treatment fractions. Conclusion: The median marker displacement was small (1.3 mm). Nevertheless, displacements >5 mm occurred in 12% of the markers. Therefore, we recommend the implantation of multiple markers because multiple markers will enable a quick and reliable check of marker displacement by determining the change in the intermarker distance. A displacement in the COM of the marker configuration of {>=}2.0 mm was almost always detected (96%) by a change in the distance between the markers of >1.5 mm. This enabled the displaced marker to be disabled, such that tumor localization was not compromised.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Dose Uncertainties in IMPT for Oropharyngeal Cancer in the Presence of Anatomical, Range, and Setup Errors

Purpose: Setup, range, and anatomical uncertainties influence the dose delivered with intensity modulated proton therapy (IMPT), but clinical quantification of these errors for oropharyngeal cancer is lacking. We quantified these factors and investigated treatment fidelity, that is, robustness, as influenced by adaptive planning and by applying more beam directions. Methods and Materials: We used an in-house treatment planning system with multicriteria optimization of pencil beam energies, directions, and weights to create treatment plans for 3-, 5-, and 7-beam directions for 10 oropharyngeal cancer patients. The dose prescription was a simultaneously integrated boost scheme, prescribing 66 Gy to primary tumor and positive neck levels (clinical target volume-66 Gy; CTV-66 Gy) and 54 Gy to elective neck levels (CTV-54 Gy). Doses were recalculated in 3700 simulations of setup, range, and anatomical uncertainties. Repeat computed tomography (CT) scans were used to evaluate an adaptive planning strategy using nonrigid registration for dose accumulation. Results: For the recalculated 3-beam plans including all treatment uncertainty sources, only 69% (CTV-66 Gy) and 88% (CTV-54 Gy) of the simulations had a dose received by 98% of the target volume (D98%) >95% of the prescription dose. Doses to organs at risk (OARs) showed considerable spread around planned values. Causes for major deviations were mixed. Adaptive planning based on repeat imaging positively affected dose delivery accuracy: in the presence of the other errors, percentages of treatments with D98% >95% increased to 96% (CTV-66 Gy) and 100% (CTV-54 Gy). Plans with more beam directions were not more robust. Conclusions: For oropharyngeal cancer patients, treatment uncertainties can result in significant differences between planned and delivered IMPT doses. Given the mixed causes for major deviations, we advise repeat diagnostic CT scans during treatment, recalculation of the dose, and if required, adaptive planning to improve adequate IMPT dose delivery.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Natural Parasite Exposure Induces Protective Human Anti-Malarial Antibodies

Antibodies against the NANP repeat of circumsporozoite protein (CSP), the major surface antigen of Plasmodium falciparum (Pf) sporozoites, can protect from malaria in animal models but protective humoral immunity is difficult to induce in humans. Here we cloned and characterized rare affinity-matured human NANP-reactive memory B cell antibodies elicited by natural Pf exposure that potently inhibited parasite transmission and development in vivo. We unveiled the molecular details of antibody binding to two distinct protective epitopes within the NANP repeat. We report NANP repeat recognition was largely mediated by germline encoded and immunoglobulin (Ig) heavy-chain complementarity determining region 3 (HCDR3) residues, whereas affinity maturation contributed predominantly to stabilizing the antigen-binding site conformation. Combined, our findings illustrate the power of exploring human anti-CSP antibody responses to develop tools for malaria control in the mammalian and the mosquito vector and provide a molecular basis for the structure-based design of next-generation CSP malaria vaccines.

59 BASIC BIOLOGICAL SCIENCES↗

Local orderings in long-range-disordered bismuth-layered intergrowth structure

A series of intergrowth bismuth-layered (Bi{sub 3}TiNbO{sub 9}){sub 2}(Bi{sub 4}Ti{sub 3}O{sub 12}) (2{sub 2}3) ceramics were prepared by conventional solid-state reaction to study the characteristics of the local orderings in long-range-disordered intergrowth structures. High-resolution high-angle annular dark-field (HAADF) imaging reveals the intergrowth structure composed of mixtures of -23-, -223-, -2223- and -22- sequences, while the -223- structure is the thermodynamic stable state of this intergrowth system. It was confirmed by the crystals of recurrent -223- structure prepared by self-flux method and the nature of the local ordering was discussed from their differences in repeating units. The statistics show that when repeating units reach 4 or higher, the independent -223- intergrowth ordering emerges clearly among the competing associated orderings. We infer it is the kinetic factor that induces local compositional variance to result in long-range disordered intergrowth structures. - Graphical abstract: The long-range-disordered intergrowth structure in a (Bi{sub 3}TiNbO{sub 9}){sub 2}(Bi{sub 4}Ti{sub 3}O{sub 12}) (2{sub 2}3) grain, which is composed of various types of local orderings, such as -22-, -23- and -223-. - Highlights: • The characteristic of the long-range-disordered (Bi{sub 3}TiNbO{sub 9}){sub 2}(Bi{sub 4}Ti{sub 3}O{sub 12}) (2{sub 2}3) structure was statistically analyzed, and the ordered -223- structure was speculated to be the thermodynamic stable state of the system. • The crystals of the -223- structure were successfully prepared for the first time by self-melt method. • The lower limit of the repeating units (L) to uniquely determine an independent intergrowth structure was speculated to be L=4. • The analysis inferred that the kinetic process is the controlling factor to limit the structural continuity and induce the long-range-disordered intergrowth structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ratiometric near infrared luminescent thermometer based on lanthanide metal-organic frameworks

A near infrared luminescent MOFs thermometer (Nd{sub 0.676}Yb{sub 0.324}BTC) was prepared via a simple solvothermal method using Ln{sup 3+} (Ln=Nd, Yb) ions and 1, 3, 5-benznenetricarboxylic acid (H{sub 3}BTC), and characterized by PXRD, TGA, ICP, and photoluminescence (PL) spectrum. These results indicate that the Nd{sub 0.676}Yb{sub 0.324}BTC displays high relative sensitivity and excellent repeatability in the physiological temperature range (288–323 K), and the maximum relative sensitivity is determined to be 1.187% K{sup −1} at 323 K. These NIR luminescent MOFs may have potential applications in physiological temperature sensing. - Graphical abstract: A near infrared luminescent MOFs thermometer (Nd{sub 0.054}Yb{sub 0.946}BTC ) displays high relative sensitivity and excellent repeatability in the physiological temperature range (288–323 K). Display Omitted - Highlights: • A ratiometric near infrared luminescent MOFs thermometer (Nd{sub 0.676}Yb{sub 0.324}BTC) was prepared via a simple solvothermal method. • The maximum relative sensitivity of Nd{sub 0.676}Yb{sub 0.324}BTC is determined to be 1.187% K{sup −1} at 323 K. • Nd{sub 0.676}Yb{sub 0.324}BTC showed excellent repeatability in the physiological temperature range (288–323 K).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of netlike gold nanoparticles using ampicillin as a stabilizing reagent and its application

Graphical abstract: Electrochemical deposition of netlike gold nanoparticles (GNPs) on the surface of glassy carbon electrode and preparation of netlike GNPs in aqueous solution using ampicillin as a stabilizing reagent were proposed. The catalytic properties of netlike gold nanoparticles on the glassy carbon electrode for dopamine were demonstrated. The results indicate that the netlike gold nanoparticle modified electrode has an excellent repeatability and reproducibility. Display Omitted Highlights: ► Synthesis of netlike gold nanoparticles using ampicillin as a stabilizing reagent. ► Excellent repeatability and reproducibility of netlike gold nanoparticle modified glassy carbon electrode. ► The catalytic properties of netlike gold nanoparticle for dopamine. -- Abstract: Electrochemical deposition of netlike gold nanoparticles on the surface of glassy carbon electrode and preparation of netlike GNPs in aqueous solution using ampicillin as a stabilizing reagent were proposed. The netlike gold nanoparticles were characterized by scanning electron microscope, transmission electron microscope, infrared spectrometer, UV spectrophotometer, powder X-ray diffractometer and electrochemical analyzer. The catalysis of the netlike gold nanoparticles on the glassy carbon electrode for dopamine was demonstrated. The results indicate that the gold nanoparticle modified electrode has an excellent repeatability and reproducibility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Functional Mini-Integrase in a Two-Protein Type V-C CRISPR System

CRISPR-Cas immunity requires integration of short, foreign DNA fragments into the host genome at the CRISPR locus, a site consisting of alternating repeat sequences and foreign-derived spacers. In most CRISPR systems, the proteins Cas1 and Cas2 form the integration complex and are both essential for DNA acquisition. Most type V-C and V-D systems lack the cas2 gene and have unusually short CRISPR repeats and spacers. Here, we show that a mini-integrase comprising the type V-C Cas1 protein alone catalyzes DNA integration with a preference for short (17- to 19-base-pair) DNA fragments. The mini-integrase has weak specificity for the CRISPR array. We present evidence that the Cas1 proteins form a tetramer for integration. Our findings support a model of a minimal integrase with an internal ruler mechanism that favors shorter repeats and spacers. This minimal integrase may represent the function of the ancestral Cas1 prior to Cas2 adoption.

59 BASIC BIOLOGICAL SCIENCES↗

Long term stability of Li-S batteries using high concentration lithium nitrate electrolytes

The lithium-sulfur (Li-S) battery is a very promising candidate for the next generation of energy storage systems required for electrical vehicles and grid energy storage applications due to its very high theoretical specific energy (2500 W h kg(-1)). However, low Coulombic efficiency (CE) during repeated Li metal plating/stripping has severely limited the practical application of rechargeable Li-S batteries. In this work, a new electrolyte system based on a high concentration of LiNO3 in diglyme (G2) solvent is developed which enables an exceptionally high CE for Li metal plating/stripping and thus high stability of the Li anode in the sulfur-containing electrolyte. The tailoring of electrolyte properties for the Li anode has proven to be a highly successful strategy for improving the capacity retention and cycle life of Li-S batteries. This electrolyte provides a CE of greater than 99% for over 200 cycles of Li plating/stripping. In contrast, the Li anode cycles for less than 35 cycles (with a high CE) in the state-of-the-art 1 M LiTFSI + 0.3 M LiNO3 in 1,3-dioxolane: 1,2-dimethoxyethane (DOL:DME) electrolyte under the same conditions. The stable Li anode enabled by the new electrolyte may accelerate the applications of high energy density Li-S batteries in both electrical vehicles and large-scale grid energy storage markets.

Coulombic efficiency↗

Differential effects of cobalt and mercury on lipid metabolism in the white adipose tissue of high-fat diet-induced obesity mice

Metals and metalloid species are involved in homeostasis in energy systems such as glucose metabolism. Enlarged adipocytes are one of the most important causes of obesity-associated diseases. In this study, we studied the possibility that various metals, namely, CoCl{sub 2}, HgCl{sub 2}, NaAsO{sub 2} and MnCl{sub 2} pose risk to or have beneficial effects on white adipose tissue (WAT). Exposure to the four metals resulted in decreases in WAT weight and the size of enlarged adipocytes in mice fed a high-fat diet (HFD) without changes in liver weight, suggesting that the size and function of adipocytes are sensitive to metals. Repeated administration of CoCl{sub 2} significantly increased serum leptin, adiponectin and high-density lipoprotein (HDL) cholesterol levels and normalized glucose level and adipose cell size in mice fed HFD. In contrast, HgCl{sub 2} treatment significantly decreased serum leptin level with the down-regulation of leptin mRNA expression in WAT and a reduction in adipocyte size. Next, we tried to investigate possible factors that affect adipocyte size. Repeated exposure to HgCl{sub 2} significantly decreased the expression levels of factors upon the regulation of energy such as the PPARα and PPARγ mRNA expression levels in adipocytes, whereas CoCl{sub 2} had little effect on those genes expressions compared with that in the case of the mice fed HFD with a vehicle. In addition, repeated administration of CoCl{sub 2} enhanced AMPK activation in a dose-dependent manner in the liver, skeletal muscle and WAT; HgCl{sub 2} treatment also enhanced AMPK activation in the liver. Thus, both Co and Hg reduced WAT weight and the size of enlarged adipocytes, possibly mediated by AMKP activation in the mice fed HFD. However, inorganic cobalt may have a preventive role in obesity-related diseases through increased leptin, adiponectin and HDL-cholesterol levels, whereas inorganic mercury may accelerate the development of such diseases. These results may lead to the development of new approaches to establishing the role of metals in adipose tissue of obesity-related diseases. -- Highlights: ► The effects of metals on enlarged white adipose tissue (WAT) were studied. ► As, Hg, Mn and Co ions reduced the size of enlarged adipocytes. ► Co{sup 2+} increased serum leptin and adiponectin levels with AMPK activation in WAT. ► Hg{sup 2+} decreased serum leptin level and leptin mRNA expression in WAT. ► Metal exposure affects the adipocyte size and the function of WAT.

60 APPLIED LIFE SCIENCES↗