Search NASA⌕ Search

SEARCH · Search NASA

Results for “STRONG FORCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Excluded volume effects in compressed polymer brushes: A density functional theory

A classical density functional theory (DFT) is applied to investigate the behavior of compressed polymer brushes composed of hard-sphere chains. The excluded volume interactions among the chain segments are explicitly treated. Two compression systems are used to study the behavior of brush-wall and brush-brush interactions. For the brush-brush systems, an obvious interpenetration zone has been observed. The extent of the interpenetration depends strongly on the grafting density. Furthermore, the repulsive force between the brush and wall or between the two brushes has been obtained as a function of the compression distance. Compared to the prediction of the analytic self-consistent field theory, such force increases more rapidly in the brush-wall compression with high polymer grafting densities or at higher compressions. In the brush-brush compression system, the interpenetration between the two compressed brushes creates a “softer” interaction. The influence of hard-sphere solvents on the behavior of compressed brushes is also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-principles assessment of thermoelectric properties of CuFeS 2

Composed of inexpensive and naturally abundant elements, the chalcopyrite mineral CuFeS 2 has received attention as a potentially useful thermoelectric. We use first-principles electronic structure and Boltzmann transport theory calculations to investigate thermoelectric properties of n -doped CuFeS 2 . We find that energy-dependent carrier lifetimes that are inversely proportional to the electronic density-of-states are crucial for reproducing experimental data on the transport properties, including the measured values of the Seebeck coefficient, α. The heavy-effective-mass conduction band promotes high values of α, but it also leads to low mobility due to strong electron-acoustic-phonon scattering. Low mobility forces one to rely on high carrier concentration to achieve high conductivity, which decreases α and limits the achievable power factor. Our calculations predict that ideally doped CuFeS 2 that has been nanostructured to an average grain size d≈20nm can attain thermoelectric figures of merit z T=0.25 to 0.8 for T=300 to 700 K, respectively, due to a reduction in the lattice thermal conductivity.

36 MATERIALS SCIENCE↗

Deep learning of dynamically responsive chemical Hamiltonians with semiempirical quantum mechanics

Conventional machine-learning (ML) models in computational chemistry learn to directly predict molecular properties using quantum chemistry only for reference data. While these heuristic ML methods show quantum-level accuracy with speeds several orders of magnitude faster than traditional quantum chemistry methods, they suffer from poor extensibility and transferability; i.e., their accuracy degrades on large or new chemical systems. Incorporating quantum chemistry frameworks into the ML models directly solves this problem. Here we take the structure of semiempirical quantum mechanics (SEQM) methods to construct dynamically responsive Hamiltonians. SEQM methods use empirical parameters fitted to experimental properties to construct reduced-order Hamiltonians, facilitating much faster calculations than ab initio methods but with compromised accuracy. By replacing these static parameters with machine-learned dynamic values inferred from the local environment, we greatly improve the accuracy of the SEQM methods. Trained on molecular energies and atomic forces, these dynamically generated Hamiltonian parameters show a strong correlation with atomic hybridization and bonding. Trained with only about 60,000 small organic molecular conformers, the resulting model retains interpretability, extensibility, and transferability when testing on much larger chemical systems and predicting various molecular properties. Overall, this work demonstrates the virtues of incorporating physics-based descriptions with ML to develop models that are simultaneously accurate, transferable, and interpretable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mixing in magnetized turbulent media

Turbulent motions are essential to the mixing of entrained fluids and are also capable of amplifying weak initial magnetic fields by small-scale dynamo action. Here we perform a systematic study of turbulent mixing in magnetized media, using three-dimensional magnetohydrodynamic simulations that include a scalar concentration field. We focus on how mixing depends on the magnetic Prandtl number, Pm, from 1 to 4 and the Mach number, M, from 0.3 to 2.4. For all subsonic flows, we find that the velocity power spectrum has a k {sup –5/3} slope in the early kinematic phase, but steepens due to magnetic back reactions as the field saturates. The scalar power spectrum, on the other hand, flattens compared to k {sup –5/3} at late times, consistent with the Obukohov-Corrsin picture of mixing as a cascade process. At higher Mach numbers, the velocity power spectrum also steepens due to the presence of shocks, and the scalar power spectrum again flattens accordingly. Scalar structures are more intermittent than velocity structures in subsonic turbulence, whereas for supersonic turbulence, velocity structures appear more intermittent than the scalars only in the kinematic phase. Independent of the Mach number of the flow, scalar structures are arranged in sheets in both the kinematic and saturated phases of the magnetic field evolution. For subsonic turbulence, scalar dissipation is hindered in the strong magnetic field regions, probably due to Lorentz forces suppressing the buildup of scalar gradients, whereas for supersonic turbulence, scalar dissipation increases monotonically with increasing magnetic field strength. At all Mach numbers, mixing is significantly slowed by the presence of dynamically important small-scale magnetic fields, implying that mixing in the interstellar medium and in galaxy clusters is less efficient than modeled in hydrodynamic simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

CONSTRAINTS ON THE IONIZING EFFICIENCY OF THE FIRST GALAXIES

Observations of the Ly{alpha} forest and of high-redshift galaxies at z {approx} 6-10 imply that there were just enough photons to maintain the universe in an ionized state at z {approx} 5-6, indicating a 'photon-starved' end to reionization. The ionizing emissivity must have been larger at earlier times in order to yield the extended reionization history implied by the electron scattering optical depth constraint from Wilkinson Microwave Anisotropy Probe (WMAP). Here we address the possibility that a faint population of galaxies with host halo masses of {approx}10{sup 8-9} M{sub Sun} dominated the ionizing photon budget at redshifts z {approx}> 9, due to their much higher escape fractions. Such faint, early galaxies, would not have formed in ionized regions due to suppression by heating from the UV background, and would therefore not contribute to the ionizing background at z {approx}< 6, after reionization is complete. Our model matches: (1) the low escape fractions observed for high-redshift galaxies, (2) the WMAP constraint of {tau}{sub es} {approx} 0.09, (3) the low values for the UVB at z < 6, and (4) the observed star formation rate density inferred from Lyman break galaxies. A top-heavy initial mass function from Pop III stars is not required in this scenario. We compare our model to recent ones in the literature that were forced to introduce an escape fraction that increases strongly toward high redshift and show that a similar evolution occurs naturally if low-mass galaxies possess high escape fractions.

79 ASTRONOMY AND ASTROPHYSICS↗

A Step in Understanding the Hubble Tension

As cosmological data have improved, tensions have arisen. One such tension is the difference between the locally measured Hubble constant H 0 and the value inferred from the cosmic microwave background (CMB). Interacting radiation has been suggested as a solution, but studies show that conventional models are precluded by high-ℓ CMB polarization data. It seems at least plausible that a solution may be provided by related models that distinguish between high- and low-ℓ multipoles. When interactions of strongly-coupled radiation are mediated by a force-carrier that becomes non-relativistic, the dark radiation undergoes a "step" in which its relative energy density increases as the mediator deposits its entropy into the lighter species. If this transition occurs while CMB-observable modes are inside the horizon, high- and low-ℓ peaks are impacted differently, corresponding to modes that enter the horizon before or after the step. Here, these dynamics are naturally packaged into the simplest supersymmetric theory, the Wess-Zumino model, with the mass of the scalar mediator near the eV-scale. We investigate the cosmological signatures of such "Wess-Zumino Dark Radiation" (WZDR) and find that it provides an improved fit to the CMB alone, favoring larger values of H 0 . If supernovae measurements from the SH0ES collaboration are also included in the analysis, the inferred value of H 0 is yet larger, but the preference for dark radiation and the location of the transition is left nearly unchanged. Utilizing a standardized set of measures, we compare to other models and find that WZDR is among the most successful at addressing the H 0 tension and the best of those with a Lagrangian formulation.

79 ASTRONOMY AND ASTROPHYSICS↗

Quantum Monte Carlo Calculations in Nuclear Theory

To a remarkable extent, atomic nuclei can be described as collections of point-like particles whose dynamics are dictated by a nonrelativistic Hamiltonian involving two- and three-nucleon potentials.Ab initio approaches are aimed at solving the many-body Schr$ \overline{o} $dinger equation associated with the nuclear Hamiltonian, which is a highly non-trivial problem because of the nonperturbative nature and the strong spin-isospin dependence of the nuclear forces. Within this framework it is possible to disentangle the theoretical uncertainty coming from modeling the nuclear potential and currents from that due to the approximations that are usually inherent in many-body techniques.Our many-body method of choice is quantum Monte Carlo (QMC), in particular Green’s function Monte Carlo (GFMC), which allows solving the nuclear Schrodinger equation with the required 1%accuracy level for both the ground- and the low-lying excited states of A ≤ 12 (A is the number of nucleons) nuclei. Since 2000 we have been achieving excellent agreement with experiment for nuclei with increasing number of nucleons by using the Argonne V18 two-nucleon interaction and the Illinois three-nucleon interactions (AV18+IL7). During this period many other groups have been developing chiral effective field theory (χEFT) potentials; these are generally nonlocal and notsuitable for QMC methods. We and collaborators have recently developed a local χEFT potential including the Δ-isobar degrees of freedom which can be used with QMC.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

KCl-UCl 3 molten salts investigated by Ab Initio Molecular Dynamics (AIMD) simulations: A comparative study with three dispersion models

Ab Initio Molecular Dynamics (AIMD) simulations are performed on molten KCl-UCl 3 salt mixtures to determine energies, heat capacities, and densities. The density-dependent energy correction (DFT-dDsC), Grimme et al.’s DFT-D3, and Langreth & Lundqvist (vdW-cx) models are used for dispersion forces and combined with the Perdew-Burke-Ernzerhof (PBE) exchange-correlation potential with a Hubbard U param eter for the 5$f$ electrons of uranium. After validating predictions for the end-member systems to literature data, KCl-UCl 3 mixtures are studied at select temperatures. Densities and energies both deviate from ideal solution behavior, with the maximum deviation occurring around 36% UCl 3 for mixing energies and slightly lower (29% UCl 3 ) for densities. Compared to the NaCl-UCl 3 system, which was previously investigated using the same simulation methodologies, the KCl-UCl 3 density and mixing energy deviations from ideal solution behavior are larger by almost a factor of two. No deviation from ideal solution behavior for heat capacity was observed. The AIMD predictions for mixing energies and densities agree qualitatively with experimental data, though the spread in data obtained from the various dispersion force models utilized, measurements, and empirical estimates makes strong conclusions difficult. The dependence of thermodynamic and thermophysical properties on composition is correlated with the local chemistry of the solution phase, in particular, the tendency of UCl 3 to form network structures.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The significant impact of aerosol vertical structure on lower atmosphere stability and its critical role in aerosol–planetary boundary layer (PBL) interactions

The aerosol–planetary boundary layer (PBL) interaction was proposed as an important mechanism to stabilize the atmosphere and exacerbate surface air pollution. Despite the tremendous progress made in understanding this process, its magnitude and significance still have large uncertainties and vary largely with aerosol distribution and meteorological conditions. In this study, we focus on the role of aerosol vertical distribution in thermodynamic stability and PBL development by jointly using micropulse lidar, sun photometer, and radiosonde measurements taken in Beijing. Despite the complexity of aerosol vertical distributions, cloud-free aerosol structures can be largely classified into three types: well-mixed, decreasing with height, and inverse structures. The aerosol–PBL relationship and diurnal cycles of the PBL height and PM 2.5 associated with these different aerosol vertical structures show distinct characteristics. The vertical distribution of aerosol radiative forcing differs drastically among the three types, with strong heating in the lower, middle, and upper PBL, respectively. Such a discrepancy in the heating rate affects the atmospheric buoyancy and stability differently in the three distinct aerosol structures. Absorbing aerosols have a weaker effect of stabilizing the lower atmosphere under the decreasing structure than under the inverse structure. As a result, the aerosol–PBL interaction can be strengthened by the inverse aerosol structure and can be potentially neutralized by the decreasing structure. Moreover, aerosols can both enhance and suppress PBL stability, leading to both positive and negative feedback loops. This study attempts to improve our understanding of the aerosol–PBL interaction, showing the importance of the observational constraint of aerosol vertical distribution for simulating this interaction and consequent feedbacks.

54 ENVIRONMENTAL SCIENCES↗

A 1.3 centimeter wavelength interferometric study of Jupiter

Maps of the brightness distribution of Jupiter at 1.3 cm wavelength are reported for the two orthogonal linear polarizations; one approximately parallel to the equator and one approximately parallel to the pole. The synthesized beam is 6.0 arc sec by 12.0 arc sec, which provides about 55 picture elements over the visible disk. The two maps do not differ significantly. There are no small real features of the size of one resolution element with brightness greater than 6 K. The disk brightness is approximately uniform, which is consistent with saturated ammonia vapor as the source of opacity in the atmosphere. Uniformly mixed ammonia, molecular hydrogen, and methane are strongly excluded as major sources of the opacity. Forcing the maps to have symmetry about the pole, as expected for the rapidly rotating planet, reduces the residual noise level in the maps so that there appears to be a small amount of limb darkening along the equator and a small amount of brightening at the poles.

Valdes, F.↗

Visual and postural motion aftereffects following parabolic flight

Postural and visual motion aftereffects may be experienced after exposure to alternating periods of free fall and increased gravitoinertial force in parabolic flight. In an aftereffect, the body feels as if it is again undergoing periodic changes in force level because of motion of the substrate; strong apparent postural motion is also accompanied by visual motion of the surroundings. The aftereffects are discussed according to: (1) their character, (2) their time course, (3) secondary symptoms associated with them, (4) conditions favoring their occurrence, (5) their relation to the inducing frequency, (6) fragments of the complete pattern, (7) their duration, and (8) the importance of contact cues.

Lackner, J. R.↗

Backlash-Free Locking Hinge

Tight joints achieved without precisely machined parts. Hinge for foldable structures locked with minimum force by human operator. Once locked, hinge makes strong, tight joint. Loose fit, or joint slop, common to commercial locking hinges eliminated. Despite tight fit, new hinge concept does not impose close tolerances on manufacture of its parts. Developed for erecting unfoldable structures in space, hinge used on collapsible scaffolds and similar terrestrial structures.

Wessekski, Clarence J.↗

Effect of large amplitude pitching motions on the unsteady aerodynamic characteristics of flat-plate wings

Large-amplitude unsteady motion effects on the aerodynamic force and stability characteristics of flat-plate wings were investigated in a wind tunnel for the cases of two delta wings with respective leading edge sweeps of 70 and 45 deg, and a rectangular wing whose aspect ratio was equal to that of the 70-deg delta wing. Attention was given to the effects of reduced frequency and mean angle of attack. It is found that lags in vortex burst location and separation/reattachment of flow on the upper surface of the wing produced large overshoots and hysteresis loops in normal force and pitching moment coefficients that were a strong function of mean oscillation angle and reduced frequency.

Brandon, Jay M.↗

The role of frictional stress in misfit dislocation generation

An evaluation is undertaken of the implications of the friction and frictionless models of misfit dislocation generation in view of: (1) experimental measurements of the critical thickness above which misfit dislocation generation occurs; and (2) the amount of strain relaxation that occurs as a function of layer thickness, time, and temperature. Some of the frictional force terms that were expected to exhibit a strong temperature dependence are shown to be independent of temperature.

Jesser, William A.↗

Nonlinear evolution of the coronal magnetic field under reconnective relaxation

Recently, Vekstein et al. (Vekstein, Priest, & Steele 1993) have developed a model for coronal heating in which the corona responds to photospheric footpoint motions by small-scale reconnection events that bring about a relaxed state while conserving magnetic helicity but not field-line connectivity. Vekstein et al. consider a partially open field configuration in which magnetic helicity is ejected to infinity on open field lines but retained in the closed-field region. Under this scheme, they describe the evolution of an initially potential field, in response to helicity injection, in the linear regime. The present work uses numerical calculations to extend the model of Vekstein et al. into the fully nonlinear regime. The results show a rise and bulging of the field lines of the closed-field region with increasing magnetic helicity, to a point where further solutions are impossible. We interpret these solution-sequence endpoints as indicating a possible loss of equilibrium, in the sense that a relaxed equilibrium state may no longer be available to the corona when sufficient helicity has been injected. The rise and bulging behavior is reminiscent of what is observed in a helmet streamer just before the start of a coronal mass ejection (CME), and so our model suggests that a catastrophic loss of magnetic equilibrium might be the initiation mechanism for CMEs. We also find that some choices of boundary conditions can result in qualitative changes in the magnetic topology, with the appearance of magnetic islands. Whether or not this behavior occurs depends on the relative strengths of the fields in the closed- and open-field regions; in particular, island formation is most likely when the open field (which is potential) is strong and thus acts to confine the force-free closed field. Finally, we show that the energy released through reconnective relaxation can be a substantial fraction of the magnetic energy injected into the corona through footpoint motions and may be sufficient for heating the corona above active regions.

Wolfson, R.↗

Sulfur during the Transition from Anoxic to Oxic Atmospheres

The invention of oxygenic photosynthesis was likely accompanied by the introduction of large amounts of O2 and complementary reduced gases (chiefly CH4) into the atmosphere. To first approximation the venting of O2 and CH4 are stochiometrically linked. We therefore present a suite of numerical photochemical models that address the anoxic-oxic transition in an atmosphere driven by large linked inputs of biogenic 02 and CH4. We find in general that, in steady state, there are two solutions, one oxic and the other anoxic. The anoxic solution appears to be linearly stable. If volcanic SO2 fluxes are large, S disproportionates into oxidized (H2S04) and reduced (S8) exit channels. As elemental sulfur is insoluble it provides a means of preserving photochemical mass-independent fractionation (MIF). On the other hand, if the source of volcanic SO2 is smaller than today, all S can leave the atmosphere as S8. Under these conditions there would be no MIF signal. The oxic solution appears to be linearly unstable. In the oxic solutions S is invariably oxidized to sulfate, and the MIF signal would be absent. The transitional atmosphere is relatively unstable and is also the most photochemically active. Consequently it is the transitional atmosphere, not the oxic or anoxic atmospheres, that has the lowest CH4 levels and weakest greenhouse warming. As a practical matter we expect the transitional atmospheres to vary strongly in response to diurnal and seasonal biological forcing.

Zahnle, Kevin↗

Future Climate Impacts of Direct Radiative Forcing Anthropogenic Aerosols, Tropospheric Ozone, and Long-lived Greenhouse Gases

Long-lived greenhouse gases (GHGs) are the most important driver of climate change over the next century. Aerosols and tropospheric ozone (O3) are expected to induce significant perturbations to the GHG-forced climate. To distinguish the equilibrium climate responses to changes in direct radiative forcing of anthropogenic aerosols, tropospheric ozone, and GHG between present day and year 2100, four 80-year equilibrium climates are simulated using a unified tropospheric chemistry-aerosol model within the Goddard Institute for Space Studies (GISS) general circulation model (GCM) 110. Concentrations of sulfate, nitrate, primary organic (POA) carbon, secondary organic (SOA) carbon, black carbon (BC) aerosols, and tropospheric ozone for present day and year 2100 are obtained a priori by coupled chemistry-aerosol GCM simulations, with emissions of aerosols, ozone, and precursors based on the Intergovernmental Panel on Climate Change (IPCC) Special Report on Emissions Scenario (SRES) A2. Changing anthropogenic aerosols, tropospheric ozone, and GHG from present day to year 2100 is predicted to perturb the global annual mean radiative forcing by +0.18 (considering aerosol direct effects only), +0.65, and +6.54 W m(sup -2) at the tropopause, and to induce an equilibrium global annual mean surface temperature change of +0.14, +0.32, and +5.31 K, respectively, with the largest temperature response occurring at northern high latitudes. Anthropogenic aerosols, through their direct effect, are predicted to alter the Hadley circulation owing to an increasing interhemispheric temperature gradient, leading to changes in tropical precipitation. When changes in both aerosols and tropospheric ozone are considered, the predicted patterns of change in global circulation and the hydrological cycle are similar to those induced by aerosols alone. GHG-induced climate changes, such as amplified warming over high latitudes, weakened Hadley circulation, and increasing precipitation over the Tropics and high latitudes, are consistent with predictions of a number of previous GCM studies. Finally, direct radiative forcing of anthropogenic aerosols is predicted to induce strong regional cooling over East and South Asia. Wintertime rainfall over southeastern China and the Indian subcontinent is predicted to decrease because of the increased atmospheric stability and decreased surface evaporation, while the geographic distribution of precipitation is also predicted to be altered as a result of aerosol-induced changes in wind flow.

Chen, Wei-Ting↗

SPOT Program

A Spacecraft Position Optimal Tracking (SPOT) program was developed to process Global Positioning System (GPS) data, sent via telemetry from a spacecraft, to generate accurate navigation estimates of the vehicle position and velocity (state vector) using a Kalman filter. This program uses the GPS onboard receiver measurements to sequentially calculate the vehicle state vectors and provide this information to ground flight controllers. It is the first real-time ground-based shuttle navigation application using onboard sensors. The program is compact, portable, self-contained, and can run on a variety of UNIX or Linux computers. The program has a modular objec-toriented design that supports application-specific plugins such as data corruption remediation pre-processing and remote graphics display. The Kalman filter is extensible to additional sensor types or force models. The Kalman filter design is also strong against data dropouts because it uses physical models from state and covariance propagation in the absence of data. The design of this program separates the functionalities of SPOT into six different executable processes. This allows for the individual processes to be connected in an a la carte manner, making the feature set and executable complexity of SPOT adaptable to the needs of the user. Also, these processes need not be executed on the same workstation. This allows for communications between SPOT processes executing on the same Local Area Network (LAN). Thus, SPOT can be executed in a distributed sense with the capability for a team of flight controllers to efficiently share the same trajectory information currently being computed by the program. SPOT is used in the Mission Control Center (MCC) for Space Shuttle Program (SSP) and International Space Station Program (ISSP) operations, and can also be used as a post -flight analysis tool. It is primarily used for situational awareness, and for contingency situations.

Smith, Jason T.↗