Search NASA⌕ Search

SEARCH · Search NASA

Results for “Supportability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

ECAR-6585 MARVEL Core Support Structure Analysis: Project #33526

Idaho National Laboratory (INL) is developing a small microreactor to produce electrical power utilizing a small nuclear core and stirling engines for power output under the Microreactor Application Research Validation and Evaluation (MARVEL) program. The MARVEL Reactor (Figure 1) will be installed in the Transient Reactor Test (TREAT) Facility. Walsh Engineering Services, PC (WES) has contracted with the INL to detail the final design. There are six main systems in the MARVEL, one of which is the Fuel and Core System (FCS). The FCS contains a subsystem–the Core Support Structures Subsystem (CSS)–that supports and orients each of the 36 nuclear fuel pins in the MARVEL Reactor System. The FCS (apart from the fixed Beryllium Oxide radial reflectors) is shown in light green and is depicted in more detail in Figure 1 and Figure 2. The main subject of this analysis is the lower grid plate, which is the principal item in the CSS which supports the fuel, see Figure 3. Additionally, the upper grid plate thermal expansion of the upper grid plate is presented in Appendix A.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Failure Mechanisms of Hollow Fiber Supported Ionic Liquid Membranes

Hollow fiber supported ionic liquid membranes (SILMs) were tested using the bubble point method to investigate potential failure modes, including the maximum transmembrane pressure before loss of the ionic liquid from the support. Porous hollow fiber supports were fabricated with different pore morphologies using Matrimid® and Torlon® as the polymeric material and 1-hexyl-3-methylimidalzolium bis(trifluoromethylsulfonyl)imide ([C6mim][Tf2N]) as the ionic liquid (IL) component. Hollow fiber SILMs were tested for their maximum pressure before failure, with pressure applied either from the bore side or shell side. It was found that the membranes exhibited one or more of three different modes of failure when pressurized: liquid loss (occurring at the bubble point), rupture, and collapse.

rupture↗

BETO 2021 Peer Review - Analytical Development & Support WBS 2.5.1.101

The objective of the Analytical Development and Support (ADS) Project is to produce and maintain the critical analytical methods and tools that enable evaluation of emerging biofuels R&D at NREL and in the broader biofuels research community. Our project is divided into two tasks: one task to develop novel analytical techniques and improve existing methods and one task to maintain existing analytical capabilities at NREL and provide outreach to the wider community. The ADS Project is world-recognized for our Laboratory Analytical Procedures (LAPS) which provide detailed procedures for compositional analysis of biomass and have been adopted as the de facto standards within the biofuels community largely due to the transparency of the methods and the high reputation of NREL's research. Our dialog with stakeholders allows us to provide robust, precise, accurate, and publicly available analytical procedures for better valuation of scientific tools such as our recent accomplishment in developing a cellulose assay to support the EPA and industry in calculation of converted cellulose during starch ethanol production. We continue to develop analytical capabilities to support BETO's directives to research cost advantaged fuels such as animal wastes and novel bioproducts like 2,3-Butane-diol.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Molecular Chemistry in a Zeolite: Genesis of a Zeolite Y-Supported Ruthenium Complex Catalyst

Dealuminated zeolite Y was used as a crystalline support for a mononuclear ruthenium complex synthesized from cis-Ru(acac){sub 2}(C{sub 2}H{sub 4}){sub 2}. Infrared (IR) and extended X-ray absorption fine structure spectra indicated that the surface species were mononuclear ruthenium complexes, Ru(acac)(C{sub 2}H{sub 4}){sub 2}{sup 2+}, tightly bonded to the surface by two Ru-O bonds at Al{sup 3+} sites of the zeolite. The maximum loading of the anchored ruthenium complexes was one complex per two Al{sup 3+} sites; at higher loadings, some of the cis-Ru(acac){sub 2}(C{sub 2}H{sub 4}){sub 2} was physisorbed. In the presence of ethylene and H{sub 2}, the surface-bound species entered into a catalytic cycle for ethylene dimerization and operated stably. IR data showed that at the start of the catalytic reaction, the acac ligand of the Ru(acac)(C{sub 2}H{sub 4}){sub 2}{sup 2+} species was dissociated and captured by an Al{sup 3+} site. Ethylene dimerization proceeded 600 times faster with a cofeed of ethylene and H{sub 2} than without H{sub 2}. These results provide evidence of the importance of the cooperation of the Al{sup 3+} sites in the zeolite and the H{sub 2} in the feed for the genesis of the catalytically active species. The results presented here demonstrate the usefulness of dealuminated zeolite Y as a nearly uniform support that allows precise synthesis of supported catalysts and detailed elucidation of their structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Increasing the Number of Oxygen Vacancies on TiO(2) By Doping With Iron Increases the Activity of Supported Gold for CO Oxidation

The addition of iron to high-area TiO{sub 2} (Degussa P25, a mixture of anatase and rutile) increases the number of oxygen defect sites that react with O{sub 2} to form peroxide and superoxide species. In the presence of gold nanoclusters on the TiO{sub 2} surface, the superoxide species become highly reactive, and the activity of the supported gold catalyst for CO oxidation is approximately twice that of the most active comparable catalysts described in the literature. Images of the catalyst obtained by scanning transmission electron microscopy combined with spectra of the catalyst measured in the working state (Raman, extended X-ray absorption fine structure, and X-ray absorption near-edge structure) indicate strong interactions of gold with the support and the presence of iron near the interfaces between the gold clusters and the TiO{sub 2} support. The high activity of the catalysts is attributed to the presence of defects in these sites that activate oxygen.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Influence of Mo- and Ga-Supported HZSM-5 Co-Catalyst Configuration in Microwave-Assisted Methane and Ethane Dehydroaromatization

Microwave (MW)-assisted dehydroaromatization (DHA) using an Mo-supported HZSM-5 catalyst (Mo/HZSM-5) enhances the value of natural gas resources by converting stranded or underutilized natural gas into value-added chemicals in modular microwave reactor systems. This approach offers the potential to generate economic value. However, natural gas mixtures often contain multiple components, including ethane (C2H6) and propane (C3H8), which complicate the reaction pathways. Ga-supported HZSM-5 (Ga/HZSM-5) catalysts are generally inactive toward CH4 but exhibit higher activity toward C2H6 and C3H8. Therefore, investigating the combination of Mo/HZSM-5 and Ga/HZSM-5 in various catalyst bed configurations is essential. This study explores different co-catalyst bed configurations and CH4/C2H6 feed compositions to determine the most effective way for enhanced natural gas conversion and benzene production.

cocatalyst bed configuration↗

Constructing Highly Durable Fuel Cell Catalysts Through Integrating Graphitic Shell‐Protected Composite Carbon Support with Gaseous Co Deposition‐Driven PtCo Intermetallics

Metal dissolution, nanoparticle agglomeration, and carbon support corrosion cause significant performance degradation of current PtCo catalysts under acidic and oxidative oxygen reduction reaction. Here, in this study, an integrated strategy is presented to design high-performance Pt 3 Co intermetallic catalysts by regulating gaseous Co deposition-driven diffusion into Pt nanoparticles supported on a composite carbon. The composite carbon is derived from ZIF-8/polyaniline, consisting of a high-surface-area (HSC) core and a protective graphitic shell (GS), which is employed to design 40 wt.% Pt/HSC@GS catalyst. The corresponding membrane electrode assemblies (MEAs) can maintain 1.09 A cm −2 at 0.7 V (20. 7% loss) after 10 000 cycles (1.0–1.5 V for carbon stability) and 1.15 A cm −2 (16.1% loss) after 150 000 cycles (0.60–0.95 V for catalyst stability). A ordered Pt 3 Co intermetallic is synthesized via a gaseous Co-deposition process, which yields a homogeneous Co-rich layer onto the Pt nanoparticles on the composite support, thereby facilitating Co diffusion into Pt crystal during subsequent ordering annealing to form the ordered intermetallic structure. This gaseous deposition leads to a thin carbon layer on PtCo nanoparticles, inhibiting particle growth during the annealing and mitigating Co dissolution under dynamic electrochemical conditions. The PtCo catalyst achieves impressive MEA performance and long-term durability (1.45 A cm −2 at 0.7 V after 120 000 cycles) under heavy-duty conditions.

30 DIRECT ENERGY CONVERSION↗

Novel Fast Cure Silicone Inks for Single-Step, Support-Free 3D Printing of Tall, Overhanging, and High Aspect Ratio Structures

Silicone elastomers have a broad variety of applications, such as soft robotics, biomedical devices, and structural metamaterials. The extrusion-based method known as direct ink write (DIW) has enabled the production of additively manufactured silicone structures. However, this method is limited to manufacturing mostly planar or pseudo-3D structures. Due to the low self-supporting capabilities of extruded strands for traditional silicone-based “inks,” obtaining tall or overhanging structures, or structures comprised by thin walls is not feasible. Here, in this study, a novel Fast Cure silicone-based ink is demonstrated that enables manufacturing of complex 3D structures. The Fast Cure ink is a two-part mixture and silicone structures are produced by inline mixing and coextrusion of a part containing a catalyst (part A) and a part containing a crosslinker (part B). By the virtue of crosslinking, the extruded strands rapidly rigidize, increasing their self-supportive capacity. Hence, structures can be obtained with superior shape retention and previously unobtainable parts are realized that are tall, with aspect ratios higher than 3, and have overhanging features, achieving inclination angles smaller than 35° with respect to the printing plane. These minimal sag parts are achieved without requiring extra curing or mechanisms, support structures, or suspension baths.

36 MATERIALS SCIENCE↗

Oxide‐Supported IrNiO x Core–Shell Particles as Efficient, Cost‐Effective, and Stable Catalysts for Electrochemical Water Splitting

Abstract Active and highly stable oxide‐supported IrNiO x core–shell catalysts for electrochemical water splitting are presented. IrNi x @IrO x nanoparticles supported on high‐surface‐area mesoporous antimony‐doped tin oxide (IrNiO x /Meso‐ATO) were synthesized from bimetallic IrNi x precursor alloys (PA‐IrNi x /Meso‐ATO) using electrochemical Ni leaching and concomitant Ir oxidation. Special emphasis was placed on Ni/NiO surface segregation under thermal treatment of the PA‐IrNi x /Meso‐ATO as well as on the surface chemical state of the particle/oxide support interface. Combining a wide array of characterization methods, we uncovered the detrimental effect of segregated NiO phases on the water splitting activity of core–shell particles. The core–shell IrNiO x /Meso‐ATO catalyst displayed high water‐splitting activity and unprecedented stability in acidic electrolyte providing substantial progress in the development of PEM electrolyzer anode catalysts with drastically reduced Ir loading and significantly enhanced durability.

Nong, Hong Nhan↗

Enhancing Activity and Reducing Cost for Electrochemical Reduction of CO 2 by Supporting Palladium on Metal Carbides

Electrochemical CO 2 reduction reaction (CO 2 RR) with renewable electricity is a potentially sustainable method to reduce CO 2 emissions. Palladium supported on cost-effective transition-metal carbides (TMCs) are studied to reduce the Pd usage and tune the activity and selectivity of the CO 2 RR to produce synthesis gas, using a combined approach of studying thin films and practical powder catalysts, in situ characterization, and density functional theory (DFT) calculations. Notably, Pd/TaC exhibits higher CO 2 RR activity, stability and CO Faradaic efficiency than those of commercial Pd/C while significantly reducing the Pd loading. In situ measurements confirm the transformation of Pd into hydride (PdH) under the CO 2 RR environment. DFT calculations reveal that the TMC substrates modify the binding energies of key intermediates on supported PdH. As a result, this work suggests the prospect of using TMCs as low-cost and stable substrates to support and modify Pd for enhanced CO 2 RR activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxide‐Supported IrNiO x Core–Shell Particles as Efficient, Cost‐Effective, and Stable Catalysts for Electrochemical Water Splitting

Abstract Active and highly stable oxide‐supported IrNiO x core–shell catalysts for electrochemical water splitting are presented. IrNi x @IrO x nanoparticles supported on high‐surface‐area mesoporous antimony‐doped tin oxide (IrNiO x /Meso‐ATO) were synthesized from bimetallic IrNi x precursor alloys (PA‐IrNi x /Meso‐ATO) using electrochemical Ni leaching and concomitant Ir oxidation. Special emphasis was placed on Ni/NiO surface segregation under thermal treatment of the PA‐IrNi x /Meso‐ATO as well as on the surface chemical state of the particle/oxide support interface. Combining a wide array of characterization methods, we uncovered the detrimental effect of segregated NiO phases on the water splitting activity of core–shell particles. The core–shell IrNiO x /Meso‐ATO catalyst displayed high water‐splitting activity and unprecedented stability in acidic electrolyte providing substantial progress in the development of PEM electrolyzer anode catalysts with drastically reduced Ir loading and significantly enhanced durability.

Nong, Hong Nhan↗

Enhancing Activity and Reducing Cost for Electrochemical Reduction of CO 2 by Supporting Palladium on Metal Carbides

Abstract Electrochemical CO 2 reduction reaction (CO 2 RR) with renewable electricity is a potentially sustainable method to reduce CO 2 emissions. Palladium supported on cost‐effective transition‐metal carbides (TMCs) are studied to reduce the Pd usage and tune the activity and selectivity of the CO 2 RR to produce synthesis gas, using a combined approach of studying thin films and practical powder catalysts, in situ characterization, and density functional theory (DFT) calculations. Notably, Pd/TaC exhibits higher CO 2 RR activity, stability and CO Faradaic efficiency than those of commercial Pd/C while significantly reducing the Pd loading. In situ measurements confirm the transformation of Pd into hydride (PdH) under the CO 2 RR environment. DFT calculations reveal that the TMC substrates modify the binding energies of key intermediates on supported PdH. This work suggests the prospect of using TMCs as low‐cost and stable substrates to support and modify Pd for enhanced CO 2 RR activity.

Wang, Jiajun↗

Boron Nitride-supported Sub-nanometer Pd 6 Clusters for Formic Acid Decomposition: A DFT Study

A periodic, self-consistent planewave DFT study was carried out to explore the potential use of Pd 6 clusters supported on a boron nitride sheet as a catalyst for the selective decomposition of formic acid (HCOOH) to CO 2 and H 2 . The competition between formate (HCOO) and carboxyl (COOH) paths on catalytic sites, with different proximities to the support, was studied. Based on energetics alone, the reaction may mainly follow the HCOO route. Slightly lower activation energies were found at the lateral sites of the cluster as compared to top face sites. This is particularly true for the bidentate to monodentate HCOO conversion. Through comparison of results with similar studies on HCOOH decomposition on extended Pd surfaces, it was demonstrated that the existence of undercoordinated sites in the sub-nanometer cluster could play a key role in preferentially stabilizing HCOO over COOH, which is a common CO precursor in this reaction. A hydrogen spillover mechanism was also investigated; migration toward the boron nitride support is not favorable, at least in the early stages of the reaction. However, hydrogen diffusion on the cluster has low barriers compared to those involved in formic acid decomposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stabilizing a Vanadium Oxide Catalyst by Supporting on a Metal-Organic Framework

NU-1000 is a robust and highly porous Zr-based metal–organic framework (Zr-MOFs) that has been confirmed to be an excellent catalyst support because of its well-defined crystal structure, protonic grafting sites on its nodes, and thermal stability, all of which advantageously offer the possibility to study the nature of the catalytic reactive sites. In this report, we introduce a vanadium-oxide catalyst supported on NU-1000 synthesized by solvothermal deposition in MOFs (SIM), namely, V-NU-1000. The catalytic activity of V-NU-1000 was investigated by studying the oxidation of 4-methoxybenzyl alcohol under an O 2 atmosphere; this catalyst showed higher conversion and higher selectivity than vanadium-oxide supported on high-surface-area zirconia (V-ZrO 2 ). The stability of V-NU-1000 was confirmed by recyclability and leaching tests, in which recycled V-NU-1000 had catalytic ability comparable to that of the fresh catalyst, and no loss in the metal loading was found in recollected V-NU-1000.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Alkene Hydrosilylation on Oxide-Supported Pt-Ligand Single–Site Catalysts

Heterogeneous single-site catalysts (SSCs), widely regarded as promising next-generation catalysts, blend the easy recovery of traditional heterogeneous catalysts with desired features of homogeneous catalysts: high fraction of active sites and uniform metal centers. We previously reported the synthesis of Pt-ligand SSCs through a novel metal-ligand self-assembly method on MgO, CeO 2 , and Al 2 O 3 . Here, we present their applications in the industrially-relevant alkene hydrosilylation reaction, with 95 % yield achieved under mild conditions. As expected, they exhibit better metal utilization efficiency than traditional heterogeneous Pt catalysts. The comparison with commercial catalysts (Karstedt and Speier) reveals several advantages of these SSCs: higher selectivity, less colloidal Pt formation, less alkene isomerization/hydrogenation, and better tolerance towards functional groups in substrates. Despite some leaching, our catalysts exhibit satisfactory recyclability and the single-site structure remains intact on oxide supports after reaction. Pt single-sites were proved to be the main active sites rather than colloidal Pt formed during the reaction. An induction period is observed in which Pt sites are activated by Cl detachment and replacement by reactant alkenes. The most active species likely involves temporary detachment of Pt from ligand or support. Catalytic performance of Pt SSCs is sensitive to the ligand and support choices, enabling fine tuning of Pt sites. This work highlights the application of heterogeneous SSCs created by the novel metal-ligand self-assembly strategy in an industrially-relevant reaction. It also offers a potential catalyst for future industrial hydrosilylation applications with several improvements over current commercial catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Global Optimization of Adsorbate Covered Supported Cluster Catalysts: The Case of Pt 7 H 10 CH 3 on α-Al 2 O 3

Determining structures of supported sub-nanometer catalytic clusters is important for finding binding sites, active sites, and reaction mechanisms. In realistic conditions, the cluster may be covered with adsorbed reactants and intermediates, which strongly affect the structure of the cluster compared to the low coverage regime. The global optimization of supported adsorbate-covered clusters is not possible with existing methods. In this paper, we present a customized Basin Hopping (BH) approach, with a core (metal cluster) – shell (adsorbates) separation scheme, and perform first applications to the search of low-energy isomers of Pt 7 /α-Al 2 O 3 at high hydrogen coverage (10H). The presence of adsorbates significantly alters the low-energy isomers compared to bare Pt 7 /α-Al 2 O 3 . Molecular dynamics simulations additionally show the different time-scales associated with the mobility of H and Pt atoms. The revised BH method with core-shell separation presents key advantages for the structural exploration of adsorbate-covered supported catalysts, relevant to realistic catalytic conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New Opportunity for Carbon-Supported Ni-based Electrocatalysts: Gas-Phase CO 2 Methanation

The cost-effectiveness and excellent performance of conductive-carbon-supported Ni-based electrocatalysts make them attractive materials for hydrogen oxidation and evolution reactions. However, they were previously unused in gas-phase hydrogenation reactions. In this work, we have expanded the applicability of commercially available advanced Ni/C, NiMo/C and NiRe/C materials from electrocatalysis to heterogeneous catalysis of CO 2 methanation. Our catalytic testing efforts indicate that the monometallic Ni/C material demonstrates the best CO 2 methanation properties, achieving an excellent CO 2 conversion of 83 % at 400 °C with nearly complete selectivity to CH 4 of 99.7 %, plus exhibiting intact performance during 90 h of time-on-stream testing. Such catalytic properties are among the highest reported to date among carbon-supported Ni-based methanation catalysts. Finally, excellent performance of Ni/C stems from the good dispersion of the Ni nanoparticles over N-containing carbon support material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionic Liquid Sheath Stabilizes Atomically Dispersed Reduced Graphene Aerogel‐Supported Iridium Complexes during Ethylene Hydrogenation Catalysis

Abstract An atomically dispersed reduced graphene aerogel (rGA)‐supported iridium catalyst having reactive ethylene ligands was synthesized at an iridium loading of 9.9 wt % and coated with an ionic liquid, 1‐ethyl‐3‐methylimidazolium acetate ([EMIM][OAc]). Continuous‐scan X‐ray absorption spectra demonstrated that the iridium remained site‐isolated in flowing equimolar C 2 H 4 and H 2 during a temperature ramp to 100 °C. The data further showed the lack of detectable iridium aggregation when the feed was H 2 ‐rich or even pure H 2 at 100 °C. An Arrhenius plot determined for ethylene hydrogenation catalysis with the sample in flowing equimolar ethylene and hydrogen showed no variation in the apparent activation energy at temperatures up to 100 °C, confirming that the active sites remained intact at the higher temperatures. The results point to opportunities for overcoming the stability limitations of atomically dispersed supported noble metal catalysts by choice of electron‐donor supports and ionic liquid sheaths.

Kurtoğlu‐Öztulum, Samira F.↗