Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface coverage”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

A Laboratory Study of the Effect of Frost Flowers on C Band Radar Backscatter from Sea Ice

C band images of Arctic sea ice taken by the ERS 1 synthetic aperture radar show transitory regions of enhanced radar backscatter from young sea ice. Published field observations associate this increase with frost flower growth and the capture of blowing snow by the flowers. To investigate the first part of this phenomenon, we carried out a laboratory experiment on the response of C band radar backscatter to frost flowers growing on the surface of newly formed saline ice. The experiment took place in a 5 m by 7 m by 1.2 m deep saline water pool located in a two-story indoor refrigerated facility at the Cold Regions Research and Engineering Laboratory. Sodium chloride ice was grown in this pool at an air temperature of -28 C. The frost flowers first appeared on the ice surface as dendrites and then changed to needles as the ice sheet grew thicker and the surface temperatures became colder. The frost flowers reached to a height of 10-15 mm, and beneath each cluster of frost flowers a slush layer formed to a thickness of approximately 4 mm. Far-field radar measurements of the backscatter from the ice were made at incident angles from 20 C to 40 C and at approximately 6-hour intervals throughout the 3-day period of the experiment. A backscatter minimum occurred early in the flower growth at the time coincident with an abrupt doubling in the ice surface salinity. Once the full flower coverage was achieved, we removed first the crystal flowers and then the slush layer from the ice surface. The results for these cases show that the crystals have little impact on the backscatter, while the underlying slush patches yield a backscatter increase of 3-5 dB over that o f bare ice. The laboratory results suggest that this relative backscatter increase of approximately 5 dB can be used as an index to mark the full areal coverage of frost flowers.

Nghiem, S. V.↗

Implications from Near-Shoemaker Imaging of Eros for Small-Scale Structure and Surface Sampling

What we know about asteroids has always been bifurcated by the enormous gap between astronomical studies of small, distant bodies, and the close-up laboratory measurements of hand-sample sized meteorites. The gulf has been narrowed somewhat by improvements in Earth-based astronomical techniques (e.g. Hubble Space Telescope, radar, adaptive optics) and especially by spacecraft fly-bys of asteroids. But the Near Earth Asteroid Rendezvous (NEAR)-Shoemaker mission has gone considerably more in the direction of bridging the gap. Any consideration of intelligent sample-return from an asteroid must be based on the best possible knowledge of the asteroid at the spatial scales pertinent to operations at the asteroid and of the sample/s. Otherwise, we are in danger of succumbing to the 'Martian Horror Story' that Bruce Murray, in the 1960's, envisioned might impair our exploration of the surface of the red planet if we tried to land on it without first bolstering the information content of our database about Mars, especially at high resolutions. NEAR-Shoemaker is helping to bridge that gap in the case of Eros. The best resolution obtained by the Galileo spacecraft on Ida was 25 m/pixel. As of this writing, NEAR has already obtained images with resolutions at least five times better (information content 25 times better) and vastly better images may be available at the time of this Workshop from the late October low flyby. Already, we are seeing that the Martian horror story looks tame compared with Eros. Everywhere we have landed on Mars, the surface has been covered with rocks and boulders, with much higher spatial coverage than seen anywhere on the lunar surface. We have, in fact, been rather lucky that none of our Martian landers have tipped over so far, and there were justified fears in the early aftermath of last year's failure of Mars Polar Lander that it had suffered from inadequate high-resolution characterization of polar regions on Mars (the failure is now known to have had another cause). Eros looks potentially even more terrifying. Additional information is contained in the original extended abstract.

Chapman, C. R.↗

Water-Gas Shift and CO Methanation Reactions over Ni-CeO2(111) Catalysts

X-ray and ultraviolet photoelectron spectroscopies were used to study the interaction of Ni atoms with CeO{sub 2}(111) surfaces. Upon adsorption on CeO{sub 2}(111) at 300 K, nickel remains in a metallic state. Heating to elevated temperatures (500-800 K) leads to partial reduction of the ceria substrate with the formation of Ni{sup 2+} species that exists as NiO and/or Ce{sub 1-x}Ni{sub x}O{sub 2-y}. Interactions of nickel with the oxide substrate significantly reduce the density of occupied Ni 3d states near the Fermi level. The results of core-level photoemission and near-edge X-ray absorption fine structure point to weakly bound CO species on CeO{sub 2}(111) which are clearly distinguishable from the formation of chemisorbed carbonates. In the presence of Ni, a stronger interaction is observed with chemisorption of CO on the admetal. When the Ni is in contact with Ce{sup +3} cations, CO dissociates on the surface at 300 K forming NiC{sub x} compounds that may be involved in the formation of CH{sub 4} at higher temperatures. At medium and large Ni coverages (>0.3 ML), the Ni/CeO{sub 2}(111) surfaces are able to catalyze the production of methane from CO and H{sub 2}, with an activity slightly higher than that of Ni(100) or Ni(111). On the other hand, at small coverages of Ni (<0.3 ML), the Ni/CeO{sub 2}(111) surfaces exhibit a very low activity for CO methanation but are very good catalysts for the water-gas shift reaction.

03 NATURAL GAS↗

Remote Floating-Gate Field-Effect Transistor with 2-Dimensional Reduced Graphene Oxide Sensing Layer for Reliable Detection of SARS-CoV-2 Spike Proteins

Despite intensive research of nanomaterials-based field-effect transistors (FETs) as a rapid diagnostic tool, it remains to be seen for FET sensors to be used for clinical applications due to a lack of stability, reliability, reproducibility, and scalability for mass production. In this work, we propose a remote floating-gate (RFG) FET configuration to eliminate device-to-device variations of two-dimensional reduced graphene oxide (rGO) sensing surfaces and most of the instability at the solution interface. Also, critical mechanistic factors behind the electrochemical instability of rGO such as severe drift and hysteresis were identified through extensive studies on rGO–solution interfaces varied by rGO thickness, coverage, and reduction temperature. rGO surfaces in our RFGFET structure displayed a Nernstian response of 54 mV/pH (from pH 2 to 11) with a 90% yield (9 samples out of total 10), coefficient of variation (CV) < 3%, and a low drift rate of 2%, all of which were calculated from the absolute measurement values. As proof-of-concept, we demonstrated highly reliable, reproducible, and label-free detection of spike proteins of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in a saliva-relevant media with concentrations ranging from 500 fg/mL to 5 μg/mL, with an R 2 value of 0.984 and CV < 3%, and a guaranteed limit of detection at a few pg/mL. Taken together, this new platform may have an immense effect on positioning FET bioelectronics in a clinical setting for detecting SARS-CoV-2.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In adlayer mediated molecular beam epitaxial growth and properties of a-plane InN on freestanding GaN

The role of the In adlayer on the morphological and structural properties of nonpolar a-plane InN films was elucidated during the plasma-assisted molecular beam epitaxy on freestanding GaN. Reflection high energy electron diffraction during In adsorption experiments on a-plane InN surfaces revealed a stable In adlayer coverage of {approx}2 ML. This In adlayer-mediated growth was responsible for achieving atomically smooth surfaces (rms roughness of <1 nm), phase-pure material with lower x-ray rocking curve widths ({delta}{omega}<0.5 deg.), lower crystal mosaic tilt/twist, and decreased stacking fault densities, compared to N-rich conditions. The photoluminescence peak emission and band gap energy of the a-plane InN films were {approx}0.63 and {approx}0.7 eV, respectively.

36 MATERIALS SCIENCE↗

Reactions of Vinyl Groups on a Model Chromia Surface: Vinyl Chloride on Stoichiometric Alpha-Cr2O3 (1012)

The thermal reaction of vinyl chloride on nearly-stoichiometric ?-Cr2O3 View the MathML source produces gas phase acetylene, ethylene, 1,3-butadiene, and dihydrogen, and results in the deposition of chlorine adatoms. No surface carbon or combustion products (CO, CO2, H2O) are observed. Thermal desorption and spectroscopic studies indicate that the surface reaction of vinyl chloride proceeds through C-Cl bond cleavage to form Cl adatoms and surface vinyl groups which dehydrogenate to acetylene, hydrogenate to ethylene, and couple to form butadiene. Cl adatoms affect surface reactivity in two ways: (1) by increasing the barrier to vinyl dehydrogenation from 145 to 160 kJ/mol, and (2) by blocking Cr3+ sites which shuts down the surface chemistry. Selectivity to butadiene is dependent on Cl adatom coverage, where the increased stability of vinyl intermediates at lower Cl coverages gives rise to more butadiene coupling product. At higher Cl coverages, Cl appears to inhibit the mobility of surface vinyl and decreases the reaction probability for coupling. Photoemission and near edge X-ray absorption fine structure (NEXAFS) spectra show that a mixed monolayer of molecular and dissociated vinyl chloride is formed at 130 K. The polarization dependence of the NEXAFS indicates that vinyl chloride ?-bonds with the molecular plane nominally parallel to the surface, while vinyl intermediates ?-bond at Cr centers with the molecular plane nominally perpendicular to the surface, in agreement with DFT predictions of the adsorption geometries.

36 MATERIALS SCIENCE↗

Statistical geometry of a small surface patch in a developed sea

The fractal and marginal fractal regimes in surface geometry are studied. The basic notions of fractal geometry are applied to a small surface patch in a developed sea, corresponding to the equilibrium wave number spectrum. Topothesy, outer and inner boundaries of the fractal range, and a cascade pattern in surface geometry are discussed. Theoretical predictions of whitecap and foam coverage are presented. A fractal decomposition for a surface patch is developed based on the Karhunen-Loeve expansion. The resulting series formalizes the cascade process of constructing realization of a Gaussian random patch. The implications of the research for microwave remote sensing signatures are considered.

Glazman, Roman E.↗

Reactions of vinyl groups on a model chromia surface: vinyl chloride on stoichiometric alpha-Cr2O3 (101-2) .

The thermal reaction of vinyl chloride on nearly-stoichiometric {alpha}-Cr{sub 2}O{sub 3}{sub (10{bar 1}2)} produces gas phase acetylene, ethylene, 1,3-butadiene, and dihydrogen, and results in the deposition of chlorine adatoms. No surface carbon or combustion products (CO, CO{sub 2}, H{sub 2}O) are observed. Thermal desorption and spectroscopic studies indicate that the surface reaction of vinyl chloride proceeds through C-Cl bond cleavage to form Cl adatoms and surface vinyl groups which dehydrogenate to acetylene, hydrogenate to ethylene, and couple to form butadiene. Cl adatoms affect surface reactivity in two ways: (1) by increasing the barrier to vinyl dehydrogenation from 145 to 160 kJ/mol, and (2) by blocking Cr{sup 3+} sites which shuts down the surface chemistry. Selectivity to butadiene is dependent on Cl adatom coverage, where the increased stability of vinyl intermediates at lower Cl coverages gives rise to more butadiene coupling product. At higher Cl coverages, Cl appears to inhibit the mobility of surface vinyl and decreases the reaction probability for coupling. Photoemission and near edge X-ray absorption fine structure (NEXAFS) spectra show that a mixed monolayer of molecular and dissociated vinyl chloride is formed at 130 K. The polarization dependence of the NEXAFS indicates that vinyl chloride {pi}-bonds with the molecular plane nominally parallel to the surface, while vinyl intermediates {sigma}-bond at Cr centers with the molecular plane nominally perpendicular to the surface, in agreement with DFT predictions of the adsorption geometries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interaction of Mineral Surfaces with Simple Carboxylic Acids In Aqueous And / or Solution In Hexane

DRIFTS was used to investigate the adsorption of simple carboxylic acids to the surface of kaolinite clay and to alumina. Dry powder samples were examined without evacuation or blending with KBr. It was possible to determine monolayer coverage of the organic on the mineral surface from analysis of the spectra. Resolution of peaks from the organic was possible for coverage as low as 0.02 molecules / nm2. Studies were done with adsorption from aqueous solution and or solution in hexane. It should be noted that under atmospheric conditions, mineral surfaces have a surface layer of water approximately 3 molecules thick. At sub monolayer coverage, spectral features of salicylic acid deposited on gamma-alumina from hexane were not distinguishable from those deposited from water. But, greater surface loading could be achieved with adsorption from the organic solvent (hexane)and new peaks were observed. Adsorption of salicylic acid , from solution in hexane , onto kaolinite was also possible. In almost all cases, spectral features associated with the carboxyl moiety were substantially altered, indicating a significant role in the adsorption mechanism. The results using hexane as solvent compared with water suggest that the surface adsorbed hydroxyl and molecular water, present on mineral oxides under ambient conditions, are a key determinant of molecular adsorbate architecture.

Thomas, Joan↗

Two-phase flow numerical analysis of electrode geometry for alkaline water electrolyzers

Hydrogen is a promising component of a future energy-secure and efficient economy, but its competitiveness depends on reducing production costs. One strategy is to operate alkaline water electrolyzers at higher current densities to increase output. However, this intensifies performance losses due to gas bubble accumulation, which blocks transport pathways and deactivates electrochemically active surfaces. Enhancing bubble evacuation through electrode design is therefore essential. Previous studies have explored various approaches — such as modifying surface morphology, applying sonication or pressure modulation, and introducing surfactants — but these efforts have addressed a limited range of conditions due to the complexity of two-phase flow and electrode geometries. Experiments have also largely been focused on either cell level improvements, which lack the information necessary to isolate each contributing factor, or on modified geometries that are not relevant to practical cell operation. From a modeling perspective, conventional Eulerian multiphase models do not track the complex gas–liquid interfacial dynamics and often neglect surface tension and contact angle effects, reducing their predictive accuracy. To provide insights on the effects of different electrode geometries on the performance of alklaine water electrolyzers this work employs an immersed boundary volume-of-fluid method to simulate bubble behavior in 3D porous electrodes. Multiple base electrode geometries, typically used in practice, with varying porosity are evaluated under a constant surface gas generation rate. Simulation data is analyzed to quantify electrode gas coverage, bubble size dynamics and other relevant metrics. Results show that porosity strongly influences bubble accumulation on electrode surfaces, with higher porosity reducing gas coverage, and its not strictly dependent on the electrode geometry. However, the electrode’s base geometry significantly affects gas accumulation at the separator gap, independent of porosity. A foam electrode geometry resulted in the lowest gas coverage of all electrodes with a median volumetric gas coverage of 11%, but at the cost of a 70% reduction in active area compared with the largest surface area electrode, while gyroid electrodes showed the best trade-off between gas coverage, particularly at the separator surface, and electrochemically active area. In conclusion, the results highlight the need for holistic electrode design strategies.

Alkaline↗

Au-adatoms in Self-assembly of Benzenethiol on the Au(111) Surface

Self-assembly of benzenethiol at low coverage on Au(111) was studied using low-temperature scanning tunneling microscopy. Phenylthiolate species (PhS), formed by thermal dehydrogenation of the parent PhSH molecule, was found to self-assemble into surface- bonded complexes with gold adatoms. Each such complex involves two PhS species and one gold adatom. The PhS-species form either cis- or trans-geometry relative to each other. At a higher coverage the complexes coalesce, most likely due to the formation of weak C- H..S hydrogen bonds facilitated by the spatial arrangement of the PhS-groups. Our findings thus establish that the self-assembly of arenethiols on Au(111) surface is driven by gold adatom chemistry, which has recently been found to be the key ingredient in the self- assembly of alkanethiols on gold.

Maksymovych, Petro↗

Insights into the interaction of nitrobenzene and the Ag(111) surface: A DFT study

Here, this study explores the potential of nitrobenzene as an anolyte material for nonaqueous redox flow batteries (RFBs) by theoretically examining its low-coverage adsorption behavior on neutral and charged Ag(111) model electrode surfaces. At the low coverage limit, DFT calculations show a preference for nitrobenzene to adsorb parallel to the surface, with the benzene ring and nitro group centered over HCP sites. Interactions between nitrobenzene and the surface were analyzed using induced charge density analysis, Bader charge analysis, and projected density of states (PDOS). It was found that nitrobenzene adsorbs primarily through van der Waals interactions with the surface. As nitrobenzene accumulates negative charge, the strength of adsorption diminishes. Understanding the electrode-electrolyte interface is crucial for enhancing RFB electrochemical performance, and this study sheds light on nitrobenzene's interaction with a model Ag electrode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface segregation of gold for Au/Pd(111) alloys measured by low-energy electron diffraction and low-energy ion scattering

The surface composition of a Au/Pd(111) alloy formed by depositing five monolayers of gold onto clean Pd(111) at 300 K in an ultrahigh vacuum and heating to various temperatures is measured from an analysis of the low-energy electron diffraction (LEED) inten- sity versus energy curves and by low-energy ion scattering (LEIS). The LEIS and LEED data yield values of the outer-layer gold cov- erage that are in good agreement and LEED shows that the second-layer gold concentration is intermediate between that of the surface and bulk. Plotting the gold coverage versus the bulk gold mole fraction estimated using Auger spectroscopy, clearly indicates that gold preferentially segregates to the surface and can be modeled by a simple Langmuir McClean equation. A fit to the experimental data yields a value of the equilibrium constant for segregation of 3.2 ñ 0.4, in good agreement with the value of 5.4 ñ 0.2 obtained for Au/Pd(111) alloys grown on Mo(11 0) substrates.

36 MATERIALS SCIENCE↗

Dynamic Characterization of Dendrite Deposition and Growth in Li-Surface by Electrochemical Impedance Spectroscopy

The evolution of dendrite formation is characterized by DC and AC electrochemical techniques. Interfacial mechanisms for lithium deposition are described and quantified by electrochemical impedance spectroscopy (EIS) between a lithium electrode and a graphite electrode. The initiation and growth of dendrites in the lithium surface due to the cathodic polarization conditions following anodic dissolution emulate long term cycling process occurring in the lithium electrodes. The dendrite initiation at the lithium/organic electrolyte interface is proposed to be performed through a combination of layering and interfacial reactions during different cathodic conditions. The growth is proposed to be performed by surface geometrical deposition. In this work, we use EIS in galvanostatic mode to assess the initiation and growth stages of dendrites by the accumulation of precipitates formed under different current conditions. The lithium/organic solvent experimental system using frequency domain techniques is validated by the theoretical approach using a deterministic model that accounts for the faradaic processes at the interface assuming a coverage fraction of the electrodic surface affected by the dendritic growth. (C) 2015 The Electrochemical Society. All rights reserved.

Hernandez-Maya, R↗

Effect of hydrogen coverage on hydrogenation of o -cresol on Pt(111)

The conversion of phenolics over metal catalysts is an important process for upgrading biofuels. With density functional calculations, hydrogenation of o-cresol on the hydrogen-covered Pt(111) surface was investigated. Here, the results show that the coverage of hydrogen plays a significant role in the reaction rate while it does not affect the reaction selectivity. The reaction barriers of the hydrogenation process leading to the formation of both 2-methyl-cyclohexanone (the intermediate product) and 2-methyl-cyclohexanol (the final product) at high H coverages (~ 1 ML) are found to be smaller by 0.14–0.69 eV than those at lower H coverages (~ 1/25 ML). After both hydrogen and cresol are adsorbed on Pt(111) from their initial gas phase state, the reaction energy of each hydrogenation step on the surface is also dependent on the hydrogen coverage. On the H-covered Pt(111) surface, most steps of hydrogenation involve exothermic reactions when the hydrogen coverage is high while they are endothermic reactions at low hydrogen coverages. The differences in reaction rate and reaction energy between high and low H coverages can be understood with the coverage-dependent bonding strength and configurations.

08 HYDROGEN↗

Potassium-induced effect on structure and chemical activity of Cu x O/Cu(111) (x≤2) surface: A combined scanning tunneling microscopy and density functional theory study

Potassium (K) plays an essential role in promoting catalytic reaction in many established industrial catalytic processes. Here, we report a combined study using scanning tunneling microscopy (STM) and density functional theory (DFT) in understanding the effect of depositing K on the atomic and electronic structures as well as chemical activities of Cu x O/Cu(111) (x≤2). The DFT calculations observe a pseudomorphic growth of K on Cu x O/Cu(111) up to 0.19 monolayer (ML) of coverage, where K binds the surface via strong ionic interaction with chemisorbed oxygen and the relatively weak electrostatic interactions with copper ions, lower and upper oxygen on the Cu x O rings. The simulated STM pattern based on the DFT results agrees well with the experimental observations. The deposited K displays great impact on the surface electronic structure of Cu x O/Cu(111), which induces significant reduction in work function and leads to a strong electron polarization on the surface. The promotion of K on the surface binding properties is selective. It varies depending on the nature of adsorbates. According to our results, K has little effect on surface acidity, while it enhances the surface basicity significantly. As a consequence, the presence of K does not help for CO adsorption on Cu x O/Cu(111), but being able to accelerate the activation of CO 2 . Thus, such promotion strongly depends on the combinations from both geometric and electronic effects. Our results highlight the origin of promoting effect of alkalis in the design of catalysts for the complex reactions.

30 DIRECT ENERGY CONVERSION↗