Search NASA⌕ Search

SEARCH · Search NASA

Results for “Synthesis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Comparison of T-piece and concentric mixing systems for continuous flow synthesis of anatase nanoparticles in supercritical isopropanol/water

T-piece and concentric counter-flow mixing systems are compared in continuous flow supercritical solvothermal synthesis of TiO{sub 2} at identical system parameters. The phase pure anatase nanoparticle products were characterized with powder X-ray diffraction (PXRD), transmission electron microscopy (TEM) and small angle X-ray scattering (SAXS), and the particle size, size distribution and absolute crystallinity mapped as a function of temperature, precursor concentration, flow rate and pressure for the two different continuous flow reactors. The particles synthesized with the T-piece geometry are smaller with a narrower size distribution, possibly indicating a more effective mixing, than particles synthesized at the same conditions with concentric counter-flow geometry. In general, an increased synthesis temperature leads to an increase in absolute crystallinity. For the particles synthesized with the concentric reactor geometry crossing of the critical point of the solvent causes a decrease in the particle size and size distribution, and conditions just above the critical temperature are demonstrated to be optimal for continuous solvothermal synthesis of anatase. - Grapical Abstract: Direct experimental comparison of T-piece and concentric mixing geometries in supercritical continuous flow synthesis of anatase nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Role of SrMoO{sub 4} in Sr{sub 2}MgMoO{sub 6} synthesis

Here we investigate the elemental and phase compositions during the solid-state synthesis of the promising SOFC-anode material, Sr{sub 2}MgMoO{sub 6}, and demonstrate that molybdenum does not notably evaporate under the normal synthesis conditions with temperatures up to 1200 {sup o}C due to the formation of SrMoO{sub 4} as an intermediate product at low temperatures, below 600 {sup o}C. However, partial decomposition of the Sr{sub 2}MgMoO{sub 6} phase becomes evident at the higher temperatures ({approx}1500 {sup o}C). The effect of SrMoO{sub 4} on the electrical conductivity of Sr{sub 2}MgMoO{sub 6} is evaluated by preparing a series of Sr{sub 2}MgMoO{sub 6} samples with different amounts of additional SrMoO{sub 4}. Under the reducing operation conditions of an SOFC anode the insulating SrMoO{sub 4} phase is apparently reduced to the highly conductive SrMoO{sub 3} phase. Percolation takes place with 20-30 wt% of SrMoO{sub 4} in a Sr{sub 2}MgMoO{sub 6} matrix, with a notable increase in electrical conductivity after reduction. Conductivity values of 14, 60 and 160 S/cm are determined at 800 {sup o}C in 5% H{sub 2}/Ar for the Sr{sub 2}MgMoO{sub 6} samples with 30, 40 and 50 wt% of added SrMoO{sub 4}, respectively. -- Graphical abstract: SrMoO{sub 4} is formed at low temperatures during the synthesis of Sr{sub 2}MgMoO{sub 6}, which prevents the volatilization of Mo from typical precursor mixtures of this promising SOFC anode material. SrMoO{sub 4} is insulating and it is often found as an impurity in Sr{sub 2}MgMoO{sub 6} samples. It is however readily reduced to highly conducting SrMoO{sub 3}. Composites of Sr{sub 2}MgMoO{sub 6} and SrMoO{sub 3} show increased electrical conductivities compared to pure Sr{sub 2}MgMoO{sub 6} under the reductive operation conditions of an SOFC anode. Display Omitted Highlights: {yields} Sr{sub 2}MgMoO{sub 6} is a promising SOFC anode material. {yields} During the Sr{sub 2}MgMoO{sub 6} synthesis SrMoO{sub 4} is formed at low temperatures. {yields} Formation of SrMoO{sub 4} effectively prevents volatilization of Mo at high temperatures. {yields} Insulating SrMoO{sub 4} reduces to highly conductive SrMoO{sub 3} under SOFC-anode conditions. {yields} Composites of Sr{sub 2}MgMoO{sub 6} and SrMoO{sub 3} show high electrical conductivities.

36 MATERIALS SCIENCE↗

Fe{sub 3}O{sub 4}–CNTs nanocomposites: Inorganic dispersant assisted hydrothermal synthesis and application in lithium ion batteries

Fe{sub 3}O{sub 4}–CNTs nanocomposites with a particle size of ∼80 nm have been synthesized through an organic-free hydrothermal synthesis strategy by using Sn(OH){sub 6}{sup 2−} as an inorganic dispersant, and served as anode materials of lithium ion batteries. Nano-sized and micro-sized Fe{sub 3}O{sub 4} without CNTs have also been prepared for comparison. The cycle performances of the as-obtained Fe{sub 3}O{sub 4} are highly size-dependent. The Fe{sub 3}O{sub 4}–CNTs nanocomposites can deliver reversible discharge capacity of ∼700 mA h/g at a current density of 50 mA/g after 50 cycles. The discharge capacity of the micro-sized Fe{sub 3}O{sub 4} decreased to 171 mA h/g after 50 cycles. Our work not only provides new insights into the inorganic dispersant assisted hydrothermal synthesis of metal oxides nanocrystals but also gives guidance for finding new nanocomposites as anode materials of lithium ion batteries. - Graphical abstract: Fe{sub 3}O{sub 4}–CNTs nanocomposites have been prepared through an inorganic dispersant assisted hydrothermal synthesis strategy, and served as anode materials of lithium ion batteries with enhanced performance. - Highlights: • Sn(OH){sub 6}{sup 2−} is a good inorganic dispersant for the hydrothermal synthesis of nano Fe{sub 3}O{sub 4}. • The cycle performances of nano Fe{sub 3}O{sub 4} anode are much better than that of micro Fe{sub 3}O{sub 4} anode. • Compositing CNTs can enhance the cycle performances of nano Fe{sub 3}O{sub 4} anode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly dispersive α″-Fe{sub 16}N{sub 2} particle synthesis using hydroxyapatite coating

Alpha″-Fe{sub 16}N{sub 2} nanoparticles (NPs) with high magnetic crystalline anisotropy are useful for practical applications such as recording media. However, due to their strongly aggregated and/or sintered form, which occurs during synthesis, the utilization of the NPs has been limited thus far. Here, we report a method for synthesizing highly dispersive α″-Fe{sub 16}N{sub 2} NPs using hydroxyapatite (HAp). The chemically and thermally stable structure of the HAp coating results in the isolation of individual NPs, such that sintering is prevented during synthesis. Additionally, the acicular shape of the HAp crystal did not hinder gas diffusion during the gas reaction. Finally, HAp can be removed by a chelating agent without deteriorating the magnetic properties, resulting in highly dispersive α″-Fe{sub 16}N{sub 2} NPs. - Graphical abstract: Synthesis process of highly dispersive α″-Fe{sub 16}N{sub 2} particles using hydroxyapatite coating and SEM images of nanoparticles. - Highlights: • Highly dispersed α″-Fe{sub 16}N{sub 2} NPs were synthesized using hydroxyapatite (HAp). • HAp coating was stable chemically and thermally during gas reaction of α″-Fe{sub 16}N{sub 2} synthesis. • The magnetic property of the resultant Fe{sub 16}N{sub 2} NPs are M{sub s} of 170 emu/g and H{sub C} of 2450 Oe.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low temperature synthesis and characterization of Na–M–(O)–F phases with M=Ti, V

Na{sub 5}Ti{sub 3}O{sub 3}F{sub 11} was prepared by the microwave assisted method, and presents a chiolite related structure with cell parameters a=10.5016(5), b=10.4025(5), and c=10.2911(5) Å and Cmca (no. 64) space group. From solvothermal synthesis at 100 °C the cryolite Na{sub 3−δ}VO{sub 1−δ}F{sub 5+δ} was prepared, which crystallizes in the monoclinic system with a=5.5403(2), b=5.6804(2), c=7.9523(2) Å, β=90.032(7)° cell parameters and P2{sub 1}/n (no. 14) space group. Under similar synthesis conditions but with higher HF concentration the chiolite-type phase Na{sub 5−δ}V{sub 3}F{sub 14} was achieved, which exhibits a=10.5482(2), b=10.4887(1) and c=10.3243(1) Å cell parameters and Cmc2{sub 1} (no. 36) space group. A single crystal also having the chiolite structure was synthesized at 200 °C which exhibits tetragonal symmetry (a=7.380(3) and c=10.381(11) Å and space group P4{sub 2}2{sub 1}2 (no. 94)). Bond valence sum indicates that it contains V{sup 4+} and therefore can be formulated as Na{sub 5}V{sub 3}O{sub 3}F{sub 11}. - Graphical abstract: Na{sub 5}M{sub 3}(O,F){sub 14} with M=Ti and V having chiolite structure and Na{sub 3−δ}VO{sub 1−δ}F{sub 5+δ} cryolite were prepared by means of microwave-assisted and solvothermal synthesis. - Highlights: • Na{sub 5}Ti{sub 3}O{sub 3}F{sub 11} chiolite was prepared by a microwave assisted method and characterized. • Na{sub 3−δ}VO{sub 1−δ}F{sub 5+δ} and Na{sub 5−δ}V{sub 3}F{sub 14} were prepared by solvothermal synthesis. • The compounds were structurally characterized by diffraction techniques. • O/F distribution was estimated by applying Pauling’s second rule.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis of Zn–Fe layered double hydroxides via an oxidation process and structural analysis of products

The synthesis of Zn–Fe(III) layered double hydroxides was attempted, employing different pathways using either Fe(II) or Fe(III) species together with Zn as the initial reagents. The product derived from the synthesis employing Fe(II) was found to transition to a Zn–Fe(III) layered double hydroxides phase following oxidation process. In contrast, the product obtained with Fe(III) did not contain a layered double hydroxides phase, but rather consisted of simonkolleite and hydrous ferric oxide. It was determined that the valency of the Fe reagent used in the initial synthesis affected the generation of the layered double hydroxides phase. Fe(II) species have ionic radii and electronegativities similar to those of Zn, and therefore are more likely to form trioctahedral hydroxide layers with Zn species. - Graphical abstract: The synthesis of Zn–Fe(III) layered double hydroxides was attempted, employing different pathways using either Fe(II) or Fe(III) species together with Zn as the initial reagents. - Highlights: • Iron valency affected the generation of Zn–Fe layered double hydroxides. • Zn–Fe layered double hydroxides were successfully synthesized using Fe(II). • Fe(II) species were likely to form trioctahedral hydroxide layers with Zn species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Peculiarities of formation of phase composition, porous structure, and catalytic properties of tungsten oxide-based macroporous materials fabricated by sol–gel synthesis

The method of template sol–gel synthesis of tungsten oxide-based macroporous materials using ‘core–shell’ latex particles as colloid templates is described. The chemical composition and structural characteristics of the synthesized macroporous oxide systems have been investigated. The peculiarities of formation of material phase composition and macroporous structure under different template thermal destruction conditions have been revealed. An optimal method of a targeted synthesis of the crystalline tungsten(VI) oxide having a defect-free macroporous structure (average pore size 160 nm) and efficient catalytic properties under organic liquid phase oxidation conditions has been suggested. The prospects of the fabricated material application as catalysts of hydrothermal oxidation of radionuclide organic complexes at radioactive waste decontamination have been demonstrated. - Highlights: • Macroporous tungsten oxides were fabricated via sol–gel process. • The correlation between synthesis conditions and composition was determined. • Influence of synthesis conditions on porous structure has been explained. • The effects of template thermodestruction have been set up. • High potential of such materials for catalysis applications has been shown.

36 MATERIALS SCIENCE↗

Controlling the sol–gel process of nano-crystalline lithium-mica glass-ceramic by its chemical composition and synthesis parameters

This paper aims to explore the impact of the parameters such as pH of the system, refluxing temperature, water quantity and chemical composition on the sol–gel synthesis of lithium-mica glass-ceramic nano-powder. The synthesis process was accomplished using two chemical composition formula (Li{sub (1+x)}Mg{sub 3}AlSi{sub 3(1+x)}O{sub 10+6.5x}F{sub 2} and LiMg{sub 3}AlSi{sub 3(1+x)}O{sub 10+6x}F{sub 2}). X-ray diffraction, Brunauer–Emmett–Teller surface area measurement and scanning electron microscopy techniques were applied to evaluate a variety of as-synthesized samples. Consequently, a transparent homogeneous sol was obtained under the conditions as pH ≤ 4, synthesis temperature ≤ 50 °C, and mol ratio of water to chemicals ≤ 2. The prepared nano-powders under such conditions were in the range of 60–100 nm. The results also revealed that the mica glass-ceramics prepared based on the composition Li{sub (1+x)}Mg{sub 3}AlSi{sub 3(1+x)}O{sub 10+6.5x}F{sub 2} possessed finer powders due to their slow hydrolysis process. Moreover, any reduction in the stoichiometric deviation of lithium mica (x) leads to acquiring finer powders. - Highlights: • A transparent homogeneous sol leads to prepare nanopowders in the range of 60–100 nm. • The particles synthesized at lower temperatures possess finer sizes. • The acquired product which is prepared with excessive water offers larger sizes. • Any reduction in stoichiometric deviation leads to acquiring finer powders. • Taking synthesis composition as Li{sub (1+x)}Mg{sub 3}AlSi{sub 3(1+x)}O{sub 10+6.5x}F{sub 2} offers finer powders.

36 MATERIALS SCIENCE↗

Quantitative phase analysis and microstructure characterization of magnetite nanocrystals obtained by microwave assisted non-hydrolytic sol–gel synthesis

An innovative preparation procedure, based on microwave assisted non-hydrolytic sol–gel synthesis, to obtain spherical magnetite nanoparticles was reported together with a detailed quantitative phase analysis and microstructure characterization of the synthetic products. The nanoparticle growth was analyzed as a function of the synthesis time and was described in terms of crystallization degree employing the Rietveld method on the magnetic nanostructured system for the determination of the amorphous content using hematite as internal standard. Product crystallinity increases as the microwave thermal treatment is increased and reaches very high percentages for synthesis times longer than 1 h. Microstructural evolution of nanocrystals was followed by the integral breadth methods to obtain information on the crystallite size-strain distribution. The results of diffraction line profile analysis were compared with nanoparticle grain distribution estimated by dimensional analysis of the transmission electron microscopy (TEM) images. A variation both in the average grain size and in the distribution of the coherently diffraction domains is evidenced, allowing to suppose a relationship between the two quantities. The traditional integral breadth methods have proven to be valid for a rapid assessment of the diffraction line broadening effects in the above-mentioned nanostructured systems and the basic assumption for the correct use of these methods are discussed as well. - Highlights: • Fe{sub 3}O{sub 4} nanocrystals were obtained by MW-assisted non-hydrolytic sol–gel synthesis. • Quantitative phase analysis revealed that crystallinity up to 95% was reached. • The strategy of Rietveld refinements was discussed in details. • Dimensional analysis showed nanoparticles ranging from 4 to 8 nm. • Results of integral breadth methods were compared with microscopic analysis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the formation of Mo{sub 2}C nanocrystals by a novel system through microwave assisted combustion synthesis

This research is devoted to microwave assisted combustion synthesis of Mo{sub 2}C nanoparticles. The ternary system of MoO{sub 3}–Zn–C was used as a novel approach for the in-situ synthesis of Mo{sub 2}C in which the zincothermic reduction of MoO{sub 3} was responsible for the combustion to take place. Results showed that the formation of Mo{sub 2}C was assisted by the zincothermic reaction, although further microwave heating up to 6 min was necessary to complete the reaction. The effects of the microwave heating and mechanical activation on the reaction progress were investigated. X-ray powder diffraction was used to examine the synthesis progress. Final products (Mo{sub 2}C and ZnO) were successfully separated from each other and the synthesized carbide was characterized by transmission electron microscopy (TEM), showing the formation of Mo{sub 2}C hexagonal nanocrystals during combustion process. - Highlights: • Hexagonal β-Mo{sub 2}C nanocrystals were successfully synthesized. • MoO{sub 3}–Zn–C powder mixture was selected as the initial mixture for the in-situ synthesis of Mo{sub 2}C. • 30 min of mechanical activation was necessary for the carbide formation to be completed. • The zincothermic reduction of MoO{sub 3} by Zn was responsible for the combustion. • The final products included of Mo{sub 2}C and ZnO in which ZnO was removed by acid leaching.

36 MATERIALS SCIENCE↗

Direct hydrothermal synthesis of hydroxyapatite/alumina nanocomposite

Hydrothermal synthesis offers numerous advantages such as: control over product homogeneity, nucleation, growth and aging. This leads to the control of particle aggregation, size uniformity and morphology over conventional and non-conventional ceramic synthesis methods. In the present work, a novel procedure for the direct synthesis of Hydroxyapatite (HAp)/alumina nanocomposite in a hydrothermal vessel with continuous stirring was investigated, where the effects of different concentration of aluminium nitrate were also studied. The optimized concentration of starting material for the characteristic formation of HAp/alumina composite (hexagonal HAp and monoclinic alumina phases) was determined by X-ray diffraction (XRD) study. The size distribution of HAp/alumina composite was found as 100 nm by electron microscopy and EDAX revealed that the concentration of alumina in the HA4 was ~ 10%, which is more suitable for biomedical implant. Further, the cytotoxicity study against MG 63 cells showed that HA4 was biocompatible even at higher concentration (200 μg/ml). Hence, the direct synthesis of HAp/alumina composite without the formation of any intermediate like calcium aluminate could be used as a novel approach to prepare HAp based biomedical implants.

36 MATERIALS SCIENCE↗

Rapid microwave synthesis of indium filled skutterudites: An energy efficient route to high performance thermoelectric materials

Graphical abstract: Filled skutterudites are promising thermoelectric materials. We report the microwave assisted synthesis of CoSb{sub 3} and In{sub 0.2}Co{sub 4}Sb{sub 12}. This method reduces the calcination time for skutterudite phase formation from 2 days to 2 min, thereby significantly reducing the time and energy needed to produce materials suitable for property and device testing. Highlights: Black-Right-Pointing-Pointer The microwave assisted solid state synthesis of CoSb{sub 3} and In{sub 0.2}Co{sub 4}Sb{sub 12} is reported. Black-Right-Pointing-Pointer This method allows the calcination time to be reduced from 2 days to 2 min. Black-Right-Pointing-Pointer Physical properties of microwave samples match those prepared conventionally. -- Abstract: Filled skutterudites are promising thermoelectric materials due to reduced thermal conductivity upon inserting a guest atom or 'rattler' into the CoSb{sub 3} structure. By using an indium rattler dimensionless Figure of Merit (ZT) values >1 at 650 K have been reported. The conventional synthesis of these compounds typically takes several days ({approx}3 days) to obtain the final well-sintered material for property measurements. We report here a microwave-assisted synthesis method that reduces the initial calcination time from 2 days to 2 min. This route significantly reduces the time needed to produce materials suitable for property and device testing.

36 MATERIALS SCIENCE↗

Mechanochemical synthesis of layered hydroxy salts

Highlights: ► Ultrafast synthesis method was developed for the synthesis of layered hydroxy salts. ► Preparation of hydroxy single salt by this method requires only one minute. ► Hydroxy salts with variable Ni/Zn ratio could be synthesized by varying the metal contents of the starting mixture. ► This synthesis method is solvent free and environment friendly. -- Abstract: A simple one minute synthesis method was adapted for the preparation of layered hydroxy salts of copper, zinc, nickel and cadmium by grinding the metal salts with sodium hydroxide in a mortar. This solvent free method is environment friendly and fast. This method could be extended to the preparation of Ni/Zn hydroxy double salts. The Ni/Zn ratio could be varied from 1.2 to 1.9 by varying the metal contents of the precursor salts without the formation of any impurities in the sample. The prepared compounds had similar characteristics as that of the samples prepared by precipitation route. No sign of carbonate contamination was observed in any of the prepared samples.

36 MATERIALS SCIENCE↗

Synthesis and characterization of mixed phases in the Ca–Co–O system using the Pechini method

Highlights: ► We have prepared mixed Ca–Co–O phases using the Pechini method. ► Reaction times are reduced relative to conventional solid-state synthesis. ► Products have high surface area suitable for ceramic processing. ► Product composition is dictated by both kinetic and thermodynamic control. ► A revised phase diagram of the Ca–Co–O system is proposed. - Abstract: The synthesis of mixed phases in the Ca–Co–O system using the Pechini method was investigated. The phases CaCo{sub 2}O{sub 4}, Ca{sub 3}Co{sub 4}O{sub 9} and Ca{sub 3}Co{sub 2}O{sub 6}, which can be expressed in terms of the molar ratios of the binary oxides (CaO:Co{sub 2}O{sub 3}) as (1:1), (3:2) and (3:1) respectively, were obtained in pure form. Powder X-ray diffraction data showed they are comparable with materials obtained by conventional solid-state synthesis. The mild synthesis conditions of the Pechini method allowed the evolution of the Ca–Co–O phases to be studied as a function of temperature and heating time. Both variables have a strong influence on the composition of the products, indicating that both kinetic and thermodynamic factors play a role, with the former being of more importance at lower temperatures. The (1:1) phase, previously not identified in the phase diagram of the Ca–Co–O system, was obtained preferentially across the composition range below ca. 650 °C. The (3:2) phase was preferred until ca. 800 °C. At even higher temperatures, the (3:1) phase is obtained. The upper thermal stability limit of mixed phases in the Ca–Co–O system increases with the Ca:Co ratio. An updated phase diagram for the Ca–Co–O system is proposed.

36 MATERIALS SCIENCE↗

Synthesis and modification of nano-sized TiO{sub 2} for photo-degradation process under visible light irradiation; a Placket–Burman experimental design

Graphical abstract: - Highlights: • Nanosized TiO{sub 2} doped with nitrogen and iron was produced by sol-gel method. • Linear models were derived to relate the phase and particle size to synthesis factors. • High photocatalytic activity was observed for acetaldehyde degradation. - Abstract: In this research, nitrogen and iron (III) co-doped nano TiO{sub 2} (N-Fe-TiO{sub 2}) was prepared by sol-gel method using ammonium chloride and iron chloride solutions as nitrogen and iron sources, respectively. The effect of synthesis parameters (weight ratios of N/TiO{sub 2} and Fe/TiO{sub 2}, synthesis temperature, calcination time and temperature) was simultaneously investigated on the quality of the N-Fe-TiO{sub 2} product by a two-level Placket–Burman experimental design. The synthesized powders were characterized by XRD, XPS and UV–Vis spectroscopy techniques. The mean crystal size and anatase content were determined and evaluated as the linear functions of so-called synthesis parameters by the statistical analysis and regression. The 2%N-1%Fe-TiO{sub 2} product by 11 nm mean crystal size and 78% anatase content, synthesized at 35 °C and calcined at 500 °C during 2 h, exhibited the most significant activity during the photo-degradation of acetaldehyde under visible light irradiation and its efficiency was obtained about four times more than photocatalytic activity of Degussa TiO{sub 2}-P25.

36 MATERIALS SCIENCE↗

Template-free synthesis of CoMoO{sub 4} rods and their characterization

Graphical abstract: - Highlights: • Template-free synthesis of rods of CoMoO{sub 4} was achieved under hydrothermal conditions. • The width of the rods is about 100 nm and the length varies from 1 to 5 μm. • Low temperature and pressure of synthesis favour the formation of longer rods. - Abstract: The effect of pressure and temperature on the synthesis of cobalt-molybdenum oxides and their characterisation is herein reported. The synthesis was performed under hydrothermal conditions without any template. It was found that the experimental conditions affect the physical properties of the CoMoO{sub 4}. SEM images demonstrate that the synthesised powder is comprised of rods, and the width of the structures is about 100 nm but the length varies from about 5 μm to less than 1 μm. Low temperature and pressure favour the formation of longer rods.

36 MATERIALS SCIENCE↗

Sonochemical and hydrothermal synthesis of PbTe nanostructures with the aid of a novel capping agent

Graphical abstract: - Highlights: • PbTe nanostructures were prepared with the aid of Schiff-base compound. • Sonochemical and hydrothermal methods were employed to fabricate PbTe nanostrucrues. • The effect of preparation parameters on the morphology of PbTe was investigated. - Abstract: In this work, a new Schiff-base compound derived from 1,8-diamino-3,6-dioxaoctane and 2-hydroxy-1-naphthaldehyde marked as (2-HyNa)-(DaDo) was synthesized, characterized, and then used as capping agent for the preparation of PbTe nanostructures. To fabricate PbTe nanostructures, two different synthesis methods; hydrothermal and sonochemical routes, were applied. To further investigate, the effect of preparation parameters like reaction time and temperature in hydrothermal synthesis and sonication time in the presence of ultrasound irradiation on the morphology and purity of the final products was tested. The products were analyzed with the aid of SEM, TEM, XRD, FT-IR, and EDS. Based on the obtained results, it was found that pure cubic phased PbTe nanostructures have been obtained by hydrothermal and sonochemical approaches. Besides, SEM images showed that cubic-like and rod-like PbTe nanostructures have been formed by hydrothermal and sonochemical methods, respectively. Sonochemical synthesis of PbTe nanostructures was favorable, because the synthesis time of sonochemical method was shorter than that of hydrothermal method.

36 MATERIALS SCIENCE↗

One-step synthesis of dense and spherical nanostructured V{sub 2}O{sub 5} particles for cathode of lithium batteries and their electrochemical properties

Graphical abstract: Dense and spherical nanostructured V{sub 2}O{sub 5} particles. - Highlights: • One-step synthesis of dense, spherical, nanostructured V{sub 2}O{sub 5} particles was achieved. • As-prepared V{sub 2}O{sub 5} consists of primary particles of approximately 100 nm size. • The electrochemical performance of spherical nanostructured V{sub 2}O{sub 5} was investigated. • The potential range affects to the discharge capacity and cyclability of V{sub 2}O{sub 5}. - Abstract: A one-step synthesis of V{sub 2}O{sub 5} was directly achieved via ultrasonic spray pyrolysis at various synthesis temperatures ranging from 500 to 700 °C. The V{sub 2}O{sub 5} prepared at 500 °C is dense and spherical nanostructured particles, which consist of primary particles with a size of approximately 100 nm. The morphology change remarkably progresses with increasing synthesis temperatures from 500 to 700 °C. The electrochemical performance of a cathode comprising dense and spherical nanostructured V{sub 2}O{sub 5} particles prepared at 500 °C was investigated by galvanostatic discharge–charge cycling and cyclic voltammetry. From the discharge–charge cycling, the initial discharge capacity of the cathode was found to be about 403 mAh g{sup −1} in the potential range of 1.5–4.0 V, but it decreased owing to inherent phase changes with repeated cycling. The potential range significantly affects the cycle performance, and the V{sub 2}O{sub 5} cathode showed good cycle performance in the potential range of 2.5–4.0 V.

36 MATERIALS SCIENCE↗