Search NASA⌕ Search

SEARCH · Search NASA

Results for “accelerator technology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

A dual-channel, focusing x-ray spectrograph with uniform dispersion for Z pinch plasmas measurement

A dual-channel, focusing x-ray spectrograph with uniform dispersion (i.e., the linear dispersion of this spectrograph is a constant) is described for measuring the x-ray spectra emission from the hot, dense Al Z pinch plasmas. The spectrograph uses double uniform-dispersed crystals (e.g., a Quartz 1010 crystal and a Mica 002 crystal) as dispersion elements and a double-film box as detector to achieve the simultaneous recording of the time integrated spectrum covering a wide spectral range of {approx}5-9 A. Since this spectrograph disperse the x-rays on the detector plane with uniform spacing for every wavelength, it needs not the calibration of the wavelength with spatial coordinate, thereby own the advantages of easiness and veracity for spectra identification. The design of this spectrograph and the example of experiment on the ''Yang'' accelerator are presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Thomson parabola spectrometry for gold laser-generated plasmas

The plasma generated from thin gold films irradiated in high vacuum at high intensity ({approx}10{sup 15} W/cm{sup 2}) laser shot is characterized in terms of ion generation through time-of-flight techniques and Thomson parabola spectrometry. Gold ions and protons, accelerated in forward direction by the electric field developed in non-equilibrium plasma, have been investigated. Measurements, performed at PALS laboratory, give information about the gold charge states distributions, the ion energy distributions and the proton acceleration driven as a function of film thickness, laser parameters, and angular emission. The ion diagnostics of produced plasma in forward direction permits to understand some mechanisms developed during its expansion kinetics. The role of the focal position of a laser beam with respect to the target surface, plasma properties, and the possibility to accelerate protons up to energies above 3 MeV has been presented and discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of low-cost, high-performance non-evaporable getter (NEG) pumps

Low-cost, high-performance non-evaporable getter (NEG) pumps were constructed using commercial NEG pills comprising 70 wt% Zr, 24.6 wt% V, and 5.4 wt% Fe, a conflat flange with an outer diameter of 70, 152, or 203 mm (DN 40 CF, DN 100 CF, and DN 160 CF, respectively), and a tantalum heater. After activation at 400 °C for 30 min, the pumping speeds of a DN 40 CF NEG pump measured with the orifice method were 47–40, 8–6, 24–17, and 19–15 L/s for H{sub 2}, N{sub 2}, CO, and CO{sub 2} gasses, respectively. NEG pumps using DN 100 CF and DN 160 CF were also developed, and their pumping speeds are estimated. These NEG pumps are favorable alternatives to sputtering ion pumps in VSX beamlines because they do not produce hydrocarbons except during the activation period. The NEG pumps can also be used for accelerators, front ends, end stations, and differential pumping systems.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Experimental study of the ion flux parameters and anode plasma dynamics in the Angara-5-1 facility

Results are presented from experimental studies of the anode plasma dynamics and measurements of the ion flux ejected along the axis of a high-current Z-pinch. Pinch discharges were formed by the implosion of tungsten wire arrays in the Angara-5-1 facility. It is shown that the ion energy spectrum depends on the mass and configuration of wire arrays, as well as on the diameter of the anode aperture. The shape of the ion spectrum indicates that the plasma propagates in the form of a compact plasmoid. Shadow and X-ray images of the plasma show that the axial velocity of the plasma outflowing through the anode aperture is comparable with the velocity of radial plasma compression and, for tungsten ions, can reach a value corresponding to an energy of 100 keV. The experimental data indicate that the ion energy spectrum mainly forms due to the electrodynamical acceleration of the plasma and cumulative jets. A possible mechanism for the production of compact plasma formations in the course of electrodynamic plasma acceleration is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Custom Equipment Development for Processing of Surplus Plutonium

The Strategic Laboratory Assessment (SLA), a collaborative team of SRNL and ORNL personnel, has been established to advance the objectives of the Surplus Plutonium Disposition (SPD) Project, by identifying and developing technologies to accelerate disposition, reduce life cycle costs, minimize worker radiation exposure, improve worker safety, and minimize Surplus Plutonium Disposition Program risks. [1] The SLA team has identified can cutting and plutonium (Pu) oxide size reduction as two glovebox processes where technology enhancements would be valuable. The DOESTD-3013 package currently in use for Pu downblending requires cutting two nested cans before the inner convenience can that holds the Pu oxide may be accessed for further processing. A rotary tubing-style cutter is used for opening the 3013 packages within the glovebox. Collet changeouts are required between cutting of the outer and inner cans. The SLA team is currently developing and testing an adjustable-clamp can cutter design that eliminates collet changeouts and allows cutting of the outer and inner can at the same time, resulting in significant reduction of radiological dose and process time, as well as improved ergonomics. To meet the Pu oxide particle size requirement, size reduction of Pu oxide agglomerations must be performed within the process gloveboxes. The SLA team has identified jaw crushing technology as an alternative to the currently employed rotary mill. Jaw crusher advantages include reduced dust within the glovebox, increased batch sizes, and easier integration with other glovebox processes due to the flow-through nature of jaw crushing. Commercially manufactured jaw crushers are either too large and/or too heavy for implementation in the SPD gloveboxes, so the SLA team is developing and testing a custom jaw crusher to meet the needs of the SPD Project.

Krementz, Daniel [Savannah River National Laborato↗

NDCX-II PULSED POWER SYSTEM AND INDUCTION CELLS

The Heavy Ion Fusion Science Virtual National Laboratory (HIFS-VNL) is currently finalizing the design of NDCX-II, the second phase of the Neutralized Drift Compression Experiment, which will use an ion beam to explore Warm Dense Matter (WDM) and Inertial Fusion Energy (IFE) target hydrodynamics. The ion induction accelerator will include induction cells and Blumleins from the decommissioned Advanced Test Accelerator (ATA) at Lawrence Livermore National Laboratory (LLNL). A test stand has been built at Lawrence Berkeley National Laboratory (LBNL) to test refurbished ATA induction cells and pulsed power hardware for voltage holding and ability to produce various compression and acceleration waveforms. The performance requirements, design modifications, and test results will be presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

HILL: The High-Intensity Laser Laboratory Core Team's Reply to Questions from the NNSA Experimental Facilities Panel

Question 1 - The type of physics regimes that HILL can access for weapons studies is quite interesting. The question that arises for the proposal team is what priority does this type of experimental data have versus data that can be obtained with NIF, and Z. How does HILL rank in priority compared to MARIE 1.0 in terms of the experimental data it will provide? We reiterate that isochoric heating experiments to be conducted with HILL are complementary to the high energy density physics experiments at NIF and Z and uniquely access states of matter that neither other facility can access. It is our belief that HILL will enable several important questions, e.g., as related to mix morphology, radiation transfer from corrugated surfaces, and equations of state, to be run to ground through carefully diagnosed, 'unit-physics' experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The effect of parallel electric field in shock waves on the acceleration of relativistic ions, electrons, and positrons

The effect of an electric field E{sub ||} parallel to the magnetic field B on particle acceleration in shock waves is studied. With test particle calculations, for which the electromagnetic fields of shock waves are obtained from one-dimensional, fully kinetic, electromagnetic, particle simulations, the motions of relativistic ions, electrons, and positrons are analyzed. In these simulations, the shock speed v{sub sh} is taken to be close to c cos {theta}, where {theta} is the angle between the external magnetic field and wave normal, and thus strong particle acceleration takes place. Test particle motions calculated in two different methods are compared: In the first method the total electric field E is used in the equation of motion, while in the second method E{sub ||} is omitted. The comparison confirms that in the acceleration of relativistic ions E{sub ||} is unimportant for high-energy particles. For the acceleration of electrons and positrons, however, E{sub ||} is essential.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Steady plasma channel formation and particle acceleration in an interaction of an ultraintense laser with near-critical density plasma

A well-defined near-steady plasma channel is successfully formed in an interaction of an intense short-pulse laser with a near-critical underdense plasma. The laser is well self-focused in the plasma channel. Our 2.5-dimensional particle-in-cell simulations also demonstrate a violent electron acceleration with a effective gradient of several tens of GeV/cm by a strong longitudinal charge-separated field. At the same time, a strong ion acceleration appears at the rear plasma boundary. The results present a regime for the plasma channel formation and the particle acceleration by ultrashort laser-plasma interaction.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron acceleration by Z-mode and whistler-mode waves

We carried out a series of particle simulations to study electron acceleration by Z-mode and whistler-mode waves generated by an electron ring distribution. The electron ring distribution leads to excitations of X-mode waves mainly in the perpendicular direction, Z-mode waves in the perpendicular and parallel directions, and whistler-mode waves mainly in the parallel direction. The parallel Z- and whistler-mode waves can lead to an effective acceleration of ring electrons. The electron acceleration is mainly determined by the wave amplitude and phase velocity, which in turn is affected by the ratio of electron plasma to cyclotron frequencies. For the initial kinetic energy ranging from 100 to 500 keV, the peak energy of the accelerated electrons is found to reach 2–8 times the initial kinetic energy. We further study the acceleration process by test-particle calculations in which electrons interact with one, two, or four waves. The electron trajectories in the one-wave case are simple diffusion curves. In the multi-wave cases, electrons are accelerated simultaneously by counter-propagating waves and can have a higher final energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evolution of flux ropes in the magnetotail: A three-dimensional global hybrid simulation

Flux ropes in the Earth's magnetotail are widely believed to play a crucial role in energy transport during substorms and the generation of energetic particles. Previous kinetic simulations are limited to the local-scale regime, and thus cannot be used to study the structure associated with the geomagnetic field and the global-scale evolution of the flux ropes. Here, the evolution of flux ropes in the magnetotail under a steady southward interplanetary magnetic field are studied with a newly developed three-dimensional global hybrid simulation model for dynamics ranging from the ion Larmor radius to the global convection time scales. Magnetic reconnection with multiple X-lines is found to take place in the near-tail current sheet at geocentric solar magnetospheric distances x=−30R{sub E}∼−15R{sub E} around the equatorial plane (z=0). The magnetotail reconnection layer is turbulent, with a nonuniform structure and unsteady evolution, and exhibits properties of typical collisionless fast reconnection with the Hall effect. A number of small-scale flux ropes are generated through the multiple X-line reconnection. The diameter of the flux ropes is several R{sub E}, and the spatial scale of the flux ropes in the dawn-dusk direction is on the order of several R{sub E} and does not extend across the entire section of the magnetotail, contrary to previous models and MHD simulation results and showing the importance of the three-dimensional effects. The nonuniform and unsteady multiple X-line reconnection with particle kinetic effects leads to various kinds of flux rope evolution: The small-scale flux ropes propagate earthward or tailward after formation, and eventually merge into the near-Earth region or the mid-/distant-tail plasmoid, respectively. During the propagation, some of the flux ropes can be tilted in the geocentric solar magnetospheric (x,y) plane with respect to the y (dawn-dusk) axis. Coalescence between flux ropes is also observed. At the same time, the evolution of the flux ropes in the multiple X-line reconnection layer can also lead to the acceleration and heating of ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Multi-dimensional effects in radiation pressure acceleration of ions

A laser carries momentum. On reflection from an ultra-thin overdense plasma foil, it deposits recoil momentum on the foil, i.e. exerts radiation pressure on the foil electrons and pushes them to the rear. The space charge field thus created takes the ions along, accelerating the electron-ion double layer as a single unit. When the foil has surface ripple, of wavelength comparable to laser wavelength, the radiation pressure acts non-uniformly on the foil and the perturbation grows as Reyleigh-Taylor (RT) instability as the foil moves. The finite spot size of the laser causes foil to bend. These effects limit the quasi-mono energy acceleration of ions. Multi-ion foils, e.g., diamond like carbon foil embedded with protons offer the possibility of suppressing RT instability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Control of laser-wakefield acceleration by the plasma-density profile

We show that both the maximum energy gain and the accelerated beam quality can be efficiently controlled by the plasma-density profile. Choosing a proper density gradient one can uplift the dephasing limitation and keep the phase synchronism between the bunch of relativistic particles and the plasma wave over extended distances. Putting electrons into the nth wake period behind the driving laser pulse, the maximum energy gain is increased by the factor, which is proportional to n, over that in the case of uniform plasma. Layered plasma is suggested to keep the resonant condition for laser-wakefield excitation. The acceleration is limited then by laser depletion rather than by dephasing. Further, we show that the natural energy spread of the particle bunch acquired at the acceleration stage can be effectively removed by a matched deceleration stage, where a larger plasma density is used.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-Energy Ions from Near-Critical Density Plasmas via Magnetic Vortex Acceleration

Ultraintense laser pulses propagating in near-critical density plasmas generate magnetic dipole vortex structures. In the region of decreasing plasma density, the vortex expands both in forward and lateral directions. The magnetic field pressure pushes electrons and ions to form a density jump along the vortex axis and induces a longitudinal electric field. This structure moves together with the expanding dipole vortex. The background ions located ahead of the electric field are accelerated to high energies. The energy scaling of ions generated by this magnetic vortex acceleration mechanism is derived and corroborated using particle-in-cell simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the feasibility of increasing the energy of laser-accelerated protons by using low-density targets

Optimal regimes of proton acceleration in the interaction of short high-power laser pulses with thin foils and low-density targets are determined by means of 3D numerical simulation. It is demonstrated that the maximum proton energy can be increased by using low-density targets in which ions from the front surface of the target are accelerated most efficiently. It is shown using a particular example that, for the same laser pulse, the energy of protons accelerated from a low-density target can be increased by one-third as compared to a solid-state target.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Vehicle Technologies Fiscal Year 2025 Annual Report

Research and development at NLR supports the U.S. Department of Energy's Vehicle Technologies Office in advancing low-cost, abundant, and secure energy technologies to accelerate a more affordable, reliable, efficient, and globally competitive U.S. transportation system.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

"DIANA" - A New, Deep-Underground Accelerator Facility for Astrophysics Experiments

The DIANA project (Dakota Ion Accelerators for Nuclear Astrophysics) is a collaboration between the University of Notre Dame, University of North Carolina, Western Michigan University, and Lawrence Berkeley National Laboratory to build a nuclear astrophysics accelerator facility 1.4 km below ground. DIANA is part of the US proposal DUSEL (Deep Underground Science and Engineering Laboratory) to establish a cross-disciplinary underground laboratory in the former gold mine of Homestake in South Dakota, USA. DIANA would consist of two high-current accelerators, a 30 to 400 kV variable, high-voltage platform, and a second, dynamitron accelerator with a voltage range of 350 kV to 3 MV. As a unique feature, both accelerators are planned to be equipped with either high-current microwave ion sources or multi-charged ECR ion sources producing ions from protons to oxygen. Electrostatic quadrupole transport elements will be incorporated in the dynamitron high voltage column. Compared to current astrophysics facilities, DIANA could increase the available beam densities on target by magnitudes: up to 100 mA on the low energy accelerator and several mA on the high energy accelerator. An integral part of the DIANA project is the development of a high-density super-sonic gas-jet target which can handle these anticipated beam powers. The paper will explain the main components of the DIANA accelerators and their beam transport lines and will discuss related technical challenges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On Reproducibility of Collective Acceleration of Protons in a Plasma-Anode Diode System

The article deals with the investigation of the conditions of reproducibility of the results of collective acceleration of protons in a high-current relativistic electron beam of nanosecond duration passing through a plasma bunch. A quantitative criterion of reproducibility in the system of an anode with a dielectric insert and a cylindrical cathode was the neutron yield in a nuclear reaction with the threshold about 2 MeV, which was measured by a silver-activated detector after each operation of the accelerator. Generation of an azimuthally-homogeneous electron beam and plasma in the area of the dielectric insert on the anode and the use of lenses in the region of electron beam drift resulted in the stabilization of the accelerating process. After optimization, the neutron yield scatter in a series of 30 pulses was at the level ±5% of the average value, which corresponded to the accelerated proton energy scatter ±3%. The conditions of best reproducibility coincided with those where the main group of protons reached their maximum values.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗