Search NASA⌕ Search

SEARCH · Search NASA

Results for “collaborative research”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

The Institute for Sustained Performance, Energy, and Resilience Final Project Report

Over the course of the five years of the Scientific Discovery through Advanced Computation (SciDAC-3) program, computational scientists working on behalf of the Department of Energy's Office of Science (DOE SC) exploited a new generation of petascale computing resources to make previously inaccessible discoveries in a broad range of disciplines including physics, chemistry, and materials science. The computing systems underpinning this work increased in performance potential from tens to hundreds of PFlop/s, but in the process evolving significantly from architectures in 2011, when SciDAC-3 began. Although Moore's law continues unabated, the end of Dennard scaling has necessitated a fundamental shift in computer architecture focused on power efficiency. To that end, processors are increasingly varied as they strive to satisfy performance, productivity, reliability, and energy efficiency in the face of divergent computational requirements. The diversity among these machines presents a number of challenges to merely porting today's scientific applications, much less achieving good performance. Therefore, at the beginning of SciDAC-3, USC and its collaborators anticipated that both vastly increased scale (e.g., more chips, more cores per chip, wider SIMD) and heterogeneity would exacerbate performance optimization challenges while simultaneously promoting the issues of energy and heterogeneity will exacerbate performance optimization challenges while simultaneously promoting the issues of energy consumption and resilience to the forefront. To ensure that DOE's computational scientists could successfully exploit emerging high performance computing (HPC) systems, DOE SC’s Advanced Scientific Computing Research Program (ASCR) funded the SciDAC-3 Institute for Sustained Performance, Energy, and Resilience (SUPER). Led by USC, this was a broadly based project with expertise in compilers and system tools, performance engineering, energy management, and resilience. SUPER followed the successful model developed in the previous SciDAC-2 Performance Engineering Research Institute (PERI) of leveraging the research investments DOE and others have made and integrating the results to create new capabilities beyond the reach of any one group. To accomplish this, SUPER was organized into multi-institution teams conducting the research activities in performance portability, energy efficiency, exascale resilience, and overall optimization. SUPER researchers also collaborated with other SciDAC-3 institutes, 13 of the 19 Scientific Computation Application Partnerships (SAP), as well as the broader DOE computational sciences community. These collaborations both focused our research on the real challenges facing petascale scientific computing as well as ensured the broad and immediate impact of the results of our research.

97 MATHEMATICS AND COMPUTING↗

Exploiting the Use of Social Networking to Facilitate Collaboration in the Scientific Community

The goal of this project was to exploit social networking to facilitate scientific collaboration. The project objective was to research and identify scientific collaboration styles that are best served by social networking applications and to model the most effective social networking applications to substantiate how social networking can support scientific collaboration. To achieve this goal and objective, the project was to develop an understanding of the types of collaborations conducted by scientific researchers, through classification, data analysis and identification of unique collaboration requirements. Another technical objective in support of this goal was to understand the current state of technology in collaboration tools. In order to test hypotheses about which social networking applications effectively support scientific collaboration the project was to create a prototype scientific collaboration system. The ultimate goal for testing the hypotheses and research of the project was to refine the prototype into a functional application that could effectively facilitate and grow collaboration within the U.S. Department of Energy (DOE) research community.

99 GENERAL AND MISCELLANEOUS↗

The Research and Training Activities for the Joint Institute for Aeronautics and Acoustics

This proposal requests continued support for the program of activities to be undertaken by the Ames-Stanford Joint Institute for Aeronautics and Acoustics during the one-year period October 1, 1996 to September 30, 1997. The emphasis in this program is on training and research in experimental and computational methods with application to aerodynamics, acoustics and the important interactions between them. The program comprises activities in active flow control, Large Eddy Simulation of jet noise, flap aerodynamics and acoustics, high lift modeling studies and luminescent paint applications. During the proposed period there will be a continued emphasis on the interaction between NASA Ames, Stanford University and Industry, particularly in connection with the noise and high lift activities. The program will be conducted within the general framework of the Memorandum of Understanding (1976) establishing the Institute, as updated in 1993. As outlined in the agreement, the purposes of the institute include the following: To conduct basic and applied research. To promote joint endeavors between Center scientists and those in the academic community To provide training to graduate students in specialized areas of aeronautics and acoustics through participation in the research programs of the Institute. To provide opportunities for Post-Doctoral Fellows to collaborate in research programs of the Institute. To disseminate information about important aeronautical topics and to enable scientists and engineers of the Center to stay abreast of new advances through symposia, seminars and publications.

Cantwell, Brian↗

Translating Research Into Airline Practice: Case Studies In Collaboration

Airline training departments are avid customers for research that will help them enhance the effectiveness of training and the safety of flight operations. However, various factors often make it difficult for training department managers to draw upon the large body of human factors research, e.g.: research may not address the specific questions facing the training departments, the research literature may not be in a form that training managers can readily interpret, researchers' recommendations may be too expensive or impractical to implement, etc. This panel will discuss ways in which researchers can work with training departments to design research and translate findings into products that airlines can use readily. This collaboration is most effective when it is an integral part of the study from its inception. To illustrate the process of collaboration we will use as a case study the recently completed LOFT (Line Oriented Flight Training) Debriefing research project. We will summarize the findings from that study and discuss how we translated those findings into two training tools: a manual on how to facilitate LOFT debriefings and a video that illustrates facilitation techniques in a realistically enacted debriefing. In some cases, instead of starting a new research project, training department needs can be addressed by reviewing the existing research literature and using expert opinion to develop products that specifically address those needs. To illustrate this approach we will discuss a recent informal working group of scientists and airline personnel that met to develop training material to enhance situation awareness. This group reviewed scientific literature and ASRS (Aviation Safety Reporting System) reports, analyzed contributing factors, and produced a model for managing situation awareness.

Dismukes, R. Key↗

Report on the Joint EU-US Workshop on Microbial Community Dynamics: Cooperation and Competition

The European Commission (EC)-United States (US) Task Force on Biotechnology Research has a longstanding joint Working Group on Biotechnology for the Environment whose mission is to foster collaborations between researchers in the European Union (EU) and US in the field of environmental biotechnology. A special focus of the Working Group is to increase scientific interchange between early career scientists in the US and EU. Such interactions initiate a foundation of respect and trust needed to develop long-term collaborations. In order to realize the full potential for the application of modern technologies to obtain a sustainable biosphere, it is vital to create conduits for knowledge exchange among scientists worldwide engaged in environmental microbial biotechnology research. Since its formation in 1994, the Working Group has organized many activities for early career scientists designed to promote this scientific exchange, including two week courses with hands-on research experience, intensive workshops of two or three days, and research scholar exchanges of one to six months. These interactions are focused on environmental problems that respect no international boundaries.

09 BIOMASS FUELS↗

Technical Evaluation of the Department of Energy Research and Development Activities in Underground Research Laboratories - 20287

Congress created the U.S. Nuclear Waste Technical Review Board (NWTRB) in the 1987 Nuclear Waste Policy Amendments Act (Public Law 100-203) to evaluate the technical and scientific validity of activities undertaken by the Secretary of Energy to implement the Nuclear Waste Policy Act. Since 2012, DOE has collaborated in research conducted in several underground research laboratories (URLs) located in Europe and Asia. According to DOE, these international collaborations have been beneficial to its spent nuclear fuel (SNF) and high-level waste radioactive (HLW) disposal research program, particularly after the termination of the Yucca Mountain repository program when DOE began generic research on alternative host rocks (crystalline, clay, and salt) and repository environments very different from those at Yucca Mountain. In accordance with its mandate, the NWTRB is reviewing the DOE research and development (R and D) activities related to URLs. The NWTRB's review is documented in a report to Congress and the Secretary of Energy that will be released in January 2020, and this paper summarizes the NWTRB review and findings. The NWTRB held a fact-finding meeting with DOE and subsequently held a workshop on international URL collaborations in April of 2019. Based on the presentations and discussions at the workshop and at the fact-finding meeting, as well as information from reports published by DOE and others, there are four principal findings related to DoE's URL-related R and D activities. First, DOE participation in URL-related international research greatly benefits the U.S. geologic disposal R and D program by furthering its understanding of generic and site-specific disposal issues relevant to alternative repository host rocks and environments. DOE-funded R and D activities also are benefiting the URL-related research of other countries, especially in the area of complex analytical and numerical model/software development. Second, the more developed repository programs in other countries have focused on creating and strengthening their safety cases and making them transparent to the public. Repository programs in other countries use URLs to explain the technical bases underlying their safety cases, periodically reassess knowledge gaps and define new activities to strengthen the technical bases, and demonstrate the technology that will allow implementation of the proposed safety concept. Third, countries with more developed geologic disposal programs have found domestic URLs essential to their repository programs. DOE needs domestic URLs to advance geologic disposal efforts over the next decades and further its ability to train the next generation of scientists, engineers, and skilled technical workers. Fourth, DoE's international URL collaborations have advanced its generic disposal R and D program, including development of modeling capabilities recognized internationally as state-of-the-art, but further work on its coupled thermal-hydrological-mechanical-chemical models and URL- and laboratory-based research can strengthen its program. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Numerical Methods for Forward and Inverse Problems in Discontinuous Media

The research emphasis under this grant's funding is in the area of algebraic multigrid methods. The research has two main branches: 1) exploring interdisciplinary applications in which algebraic multigrid can make an impact and 2) extending the scope of algebraic multigrid methods with algorithmic improvements that are based in strong analysis.The work in interdisciplinary applications falls primarily in the field of biomedical imaging. Work under this grant demonstrated the effectiveness and robustness of multigrid for solving linear systems that result from highly heterogeneous finite element method models of the human head. The results in this work also give promise to medical advances possible with software that may be developed. Research to extend the scope of algebraic multigrid has been focused in several areas. In collaboration with researchers at the University of Colorado, Lawrence Livermore National Laboratory, and Los Alamos National Laboratory, the PI developed an adaptive multigrid with subcycling via complementary grids. This method has very cheap computing costs per iterate and is showing promise as a preconditioner for conjugate gradient. Recent work with Los Alamos National Laboratory concentrates on developing algorithms that take advantage of the recent advances in adaptive multigrid research. The results of the various efforts in this research could ultimately have direct use and impact to researchers for a wide variety of applications, including, astrophysics, neuroscience, contaminant transport in porous media, bi-domain heart modeling, modeling of tumor growth, and flow in heterogeneous porous media. This work has already led to basic advances in computational mathematics and numerical linear algebra and will continue to do so into the future.

97 MATHEMATICS AND COMPUTING↗

Decomposition of Rare Earth Loaded Resin Particles

The Fuel Cycle R and D (FCR and D) program within the Department of Energy Office of Nuclear Energy (DOE-NE) is evaluating nuclear fuel cycle options, including once-through, modified open, and fully closed cycles. Each of these scenarios may utilize quite different fuel management schemes and variation in fuel types may include high thermal conductivity UO{sub 2}, thoria-based, TRISO, metal, advanced ceramic (nitride, carbide, composite, etc.), and minor actinide (MA) bearing fuels and targets. Researchers from the US, Europe, and japan are investigating methods of fabricating high-specific activity spherical particles for fuel and target applications. The capital, operating, and maintenance costs of such a fuel fabrication facility can be significant, thus fuel synthesis and fabrication processes that minimize waste and process losses, and require less footprint are desired. Investigations have been performed at the Institute for Transuranium Elements (ITU) and the French Atomic Energy Commission (CEA) studying the impact of americium and curium on the fuel fabrication process. proof of concept was demonstrated for fabrication of MA-bearing spherical particles, however additional development will be needed for engineering scale-up. Researchers at the Paul Scherer Institute (PSI) and the Japan Atomic Energy Association (JAEA) have collaborated on research with ceramic-metallic (CERMET) fuels using spherical particles as the ceramic component dispersed in the metal matrix. Recent work at the CEA evaluates the burning of MA in the blanket region of sodium fast reactors. There is also interest in burning MA in Canada Deuterium Uranium (CANDU) reactors. The fabrication of uranium-MA oxide pellets for a fast reactor blanket or MA-bearing fuel for CANDU reactors may benefit from a low-loss dedicated footprint for producing MA-spherical particles. One method for producing MA-bearing spherical particles is loading the actinide metal on a cation exchange resin. The AG-50W resin is made of sulfonic acid functional groups attached to a styrene divinylbenzene copolymer lattice (long chained hydrocarbon). The metal cation binds to the sulfur group, then during thermal decomposition in air the hydrocarbons will form gaseous species leaving behind a spherical metal-oxide particle. Process development for resin applications with radioactive materials is typically performed using surrogates. For americium and curium, a trivalent metal like neodymium can be used. Thermal decomposition of Nd-loaded resin in air has been studied by Hale. Process conditions were established for resin decomposition and the formation of Nd{sub 2}O{sub 3} particles. The intermediate product compounds were described using x-ray diffraction (XRD) and wet chemistry. Leskela and Niinisto studied the decomposition of rare earth (RE) elements and found results consistent with Hale. Picart et al. demonstrated the viability of using a resin loading process for the fabrication of uranium-actinide mixed oxide microspheres for transmutation of minor actinides in a fast reactor. For effective transmutation of actinides, it will be desirable to extend the in-reactor burnup and minimize the number of recycles of used actinide materials. Longer burn times increases the chance of Fuel Clad Chemical or Mechanical Interaction (FCCI, FCMI). Sulfur is suspected of contributing to Irradiation Assisted Stress Corrosion Cracking (IASCC) thus it is necessary to maximize the removal of sulfur during decomposition of the resin. The present effort extends the previous work by quantifying the removal of sulfur during the decomposition process. Neodymium was selected as a surrogate for trivalent actinide metal cations. As described above Nd was dissolved in nitric acid solution then contacted with the AG-50W resin column. After washing the column, the Nd-resin particles are removed and dried. The Nd-resin, seen in Figure 1 prior to decomposition, is ready to be converted to Nd oxide microspheres.

americium↗

The Research and Training Activities for the Joint Institute for Aeronautics and Acoustics

This proposal requests continued support for the program of activities to be undertaken by the Ames-Stanford Joint Institute for Aeronautics and Acoustics during the one-year period October 1, 1997 to September 30, 1998. The emphasis in this program is on training and research in experimental and computational methods with application to aerodynamics, acoustics and the important interactions between them. The program comprises activities in active flow control, Large Eddy Simulation of jet noise, flap aerodynamics and acoustics, high lift modeling studies and luminescent paint applications. During the proposed period there will be a continued emphasis on the interaction between NASA Ames, Stanford University and Industry, particularly in connection with the noise and high lift activities. The program will be conducted within the general framework of the Memorandum of Understanding (1976) establishing the Institute, as updated in 1993. As outlined in the agreement, the purposes of the Institute include the following: (1) To conduct basic and applied research; (2) to promote joint endeavors between Center scientists and those in the academic community; (3) to provide training to graduate students in specialized areas of aeronautics and acoustics through participation in the research programs of the Institute; (4) to provide opportunities for Post-Doctoral Fellows to collaborate in research programs of the Institute; and (5) to disseminate information about important aeronautical topics and to enable scientists and engineers of the Center to stay abreast of new advances through symposia, seminars and publications.

Cantwell, Brian↗

A Summary of Recent Experimental Research on Ion Energy and Charge States of Pulsed Vacuum Arcs

The paper reviews the results of vacuum arc experimental investigations made collaboratively by research groups from Berkeley and Tomsk over the last two years, i.e. since the last ISDEIV in 2006. Vacuum arc plasma of various metals was produced in pulses of a few hundred microseconds duration, and the research focussed on three topics: (i) the energy distribution functions for different ion charge states, (ii) the temporal development of the ion charge state distribution, and (iii) the evolution of the mean directed ion velocities during plasma expansion. A combined quadruple mass-to-charge and energy ana-lyzer (EQP by HIDEN Ltd) and a time-of-flight spectrometer were employed. Cross-checking data by those complimen-tary techniques helped to avoid possible pitfalls in interpre-tation. It was found that the ion energy distribution func-tions in the plasma were independent of the ion charge state, which implies that the energy distribution on a substrate are not equal to due to acceleration in the substrate's sheath. In pulsed arc mode, the individual ion charge states fractions showed changes leading to a decrease of the mean charge state toward a steady-state value. This decrease can be re-duced by lower arc current, higher pulse repetition rate and reduced length of the discharge gap. It was also found that the directed ion velocity slightly decreased as the plasma expanded into vacuum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ohio Space Grant Funds for Scholarship/Fellowship Students

The Ohio Aerospace Institute (OAT), a consortium of university, industry, and government, was formed to promote collaborative aerospace-related research, graduate education, and technology transfer among the nine Ohio universities with doctoral level engineering programs, NASA Lewis Research Center, Air Force Wright Laboratory, and industry. OAT provides enhanced opportunities for affiliates to utilize federal government research laboratories and facilities at Lewis Research Center (LeRC) and Wright Laboratory. As a component of the graduate education and research programs, students and faculty from the member universities, LeRC engineers and scientists, and visiting investigators from industry, government and non-member universities conduct collaborative research projects using the unique facilities at LeRC, and will participate in collaborative education programs. Faculty from the member universities who hold collateral appointments at OAT, and government and industry experts serving as adjunct faculty, can participate in the supervision of student research.

Source record↗

Summer Workshops on Climate Change Impacts and Integrated Assessment of Climate Change (Final Technical Report)

This grant supported a long sequence of summer workshops in Snowmass, Colorado that began in 1996. The last workshop in this sequence was held in the summer of 2016. This annual event was a centerpiece in the Department of Energy’s support for the creation and maintenance of a community of practice in integrated multi-sector dynamics research and modeling. These workshops brought together key members of the multi-sector dynamics modeling community with other researchers engaged in relevant research on multi-sector (energy, water, land, etc., dynamics) research to participate in discussions of cutting-edge research topics and develop collaborative approaches for addressing open research challenges. This grant provided funds to leverage BER and other federal research investments in the development of appropriate multi-sector dynamics modeling methods by expanding interactions and promoting collaborations between the community of researchers engaged in this research and those involved in other energy and environmental systems research programs. This process is augmented through various outreach activities including periodic presentations and web-based and other internet-based methods for disseminating key scientific findings and to otherwise engage broader participation in pre- and post-workshop discussions and information exchange. The main goals of the summer workshop series were to: Build and support an integrated multi-sector dynamics (iMSD)research community of practice; Infuse best-in-class science into iMSD research activities; Exchange international iMSD research perspectives and information; Accelerate research integration among the iMSD, the sectoral impacts, and earth and environmental systems modeling communities; Develop collaborative scientific perspectives on significant iMSD research challenges; Build collaborations in addressing the challenges; and Develop processes to share information more broadly within the iMSD and the associated family of research communities. The funding provided for this workshop series has helped the energy and environmental systems modeling research community in general - and the multi-sector dynamics research community in particular - make progress on addressing these and other significant research and community building challenges.

54 ENVIRONMENTAL SCIENCES↗

Roadmap to the multidisciplinary design analysis and optimisation of wind energy systems

Here, a research agenda is described to further encourage the application of Multidisciplinary Design Analysis and Optimisation (MDAO) methodologies to wind energy systems. As a group of researchers closely collaborating within the International Energy Agency (IEA) Wind Task 37 for Wind Energy Systems Engineering: Integrated Research, Design and Development, we have identified challenges that will be encountered by users building an MDAO framework. This roadmap comprises 17 research questions and activities recognised to belong to three research directions: model fidelity, system scope and workflow architecture. It is foreseen that sensible answers to all these questions will enable to more easily apply MDAO in the wind energy domain. Beyond the agenda, this work also promotes the use of systems engineering to design, analyse and optimise wind turbines and wind farms, to complement existing compartmentalised research and design paradigms.

17 WIND ENERGY↗

Engineering Precisely Controlled Negative and Zero Thermal Expansion Behaviors in Metal-Organic Frameworks

Positive thermal expansion can cause significant stress or even catastrophic device failure in applications where materials are placed in confined environments. At material interfaces such as coatings, thermal expansion effects can also lead to cracking and peeling behavior. The ability to impart controlled thermal expansion properties in an array of designs via additive manufacturing technologies would mitigate such problems and bring significant value to various materials science and engineering challenges. Negative thermal expansion materials are of interest for composite material applications whereby they can compensate for the behavior of a positive thermal expansion matrix. This Truman Fellowship LDRD research project presents complimentary experimental and molecular modeling results towards the fundamental understanding and development of metal-organic framework (MOF) materials with controlled thermal expansion properties. Design strategies for imparting precisely tailored negative, zero, and positive thermal expansion regimes in MOFs are studied and the implications of these design strategies for the use of MOFs as an emergent negative thermal expansion material class are examined. Challenges towards exploiting this nanoscale behavior at length scales relevant to composite material systems are introduced. ACKNOWLEDGEMENTS I will be forever grateful to the Truman Fellowship Selection Committee for providing me with the opportunity to pursue this research project. The unique opportunity to carry out this exciting scientific research with all of the resources and support that Sandia has to offer has been a truly rewarding experience. I would like to especially thank Yolanda Moreno for her endless assistance throughout my time as a Truman Fellow. It is hard to imagine a more supportive and stimulating scientific environment to carry out this research. I would also like to thank all of my colleagues and the individuals that have collaborated with me throughout this Fellowship, both internal and external to Sandia. Many of you appear as co-authors on the publications resulting from this LDRD, including especially fruitful collaborations with researchers at the Georgia Institute of Technology and the University of Amsterdam. I cannot express enough my gratitude for the significant role that you all played in shaping my educational experience and the success during my time at Sandia as a Truman Fellow.

36 MATERIALS SCIENCE↗

Mind the gaps! Climate scientists should heed lessons in collaborative storytelling from William Shakespeare

Abstract To co‐produce locally relevant climate knowledge, climate scientists are engaging in new collaborations—with stakeholders and with scholars in the humanities, arts, and social sciences. In our work as a Shakespeare scholar‐turned‐public‐humanist and a climate scientist, we have created a methodology that allows researchers and communities to co‐produce knowledge by co‐producing narratives. We combine principles from emerging climate “storylines” research with collaborative storytelling inspired by William Shakespeare's plays and theatrical practices. Shakespeare's plays spark collaborations and interpretations, in part, because of how Shakespeare leaves gaps in the narrative. These gaps allow others to enter as collaborators, creating a “cognitive ecology” that fosters knowledge and action among all engaged. Integrating these methods into climate storyline‐making offers a radical paradigm: it upends the scientist's role as the focal storyteller and expert, and fosters, instead, partnership, equity, and a co‐exploration of multiple uncertainties. It is time for researchers to cede control to a cognitive ecology of collaborative action. This article is categorized under: Trans‐Disciplinary Perspectives > Humanities and the Creative Arts

54 ENVIRONMENTAL SCIENCES↗

IAEA coordinated research project on thermal-hydraulics of Supercritical Water-Cooled Reactors (SCWRs)

The Supercritical Water-Cooled Reactor (SCWR) is an innovative water-cooled reactor concept, which uses supercritical pressure water as reactor coolant. It has been attracting interest of many researchers in various countries mainly due to its benefits of high thermal efficiency and simple primary systems, resulting in low capital cost. The IAEA started in 2008 a Coordinated Research Project (CRP) on Thermal-Hydraulics of SCWRs as a forum to foster the exchange of technical information and international collaboration in research and development. This paper summarizes the activities and current status of the CRP, as well as major progress achieved to date. At present, 15 institutions closely collaborate in several tasks. Some organizations have been conducting thermal-hydraulics experiments and analysing the data, and others have been participating in code-to-test and/or code-to-code benchmark exercises. The expected outputs of the CRP are also discussed. Finally, the paper introduces several IAEA activities relating to or arising from the CRP. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

SU-E-E-07: An Adaptable Approach for Education On Medical Physics at Undergraduate and Postgraduate Levels

Purpose: To contribute to the professional profile of future medical physicists, technologists and physicians, and implement an adaptable educational strategy at both undergraduate and postgraduate levels. Methods: The Medical Physics Block of Electives (MPBE) designed was adapted to the Program of B.S. in Physics. The conferences and practical activities were developed with participatory methods, with interdisciplinary collaboration from research institutions and hospitals engaged on projects of Research, Development and Innovation (RDI). The scientific education was implemented by means of critical analysis of scientific papers and seminars where students debated on solutions for real research problems faced by medical physicists. This approach included courses for graduates not associated to educational programs of Medical Physics (MP). Results: The implementation of the MPBE began in September 2014, with the electives of Radiation MP and Introduction to Nuclear Magnetic Resonance. The students of second year received an Introduction to MP. This initiative was validated by the departmental Methodological Workshop, which promoted the full implementation of the MPBE. Both postgraduated and undergraduate trainees participated in practices with our DICOM viewer system, a local prototype for photoplethysmography and a home-made interface for ROC analysis, built with MATLAB. All these tools were designed and constructed in previous RDI projects. The collaborative supervision of University’s researchers with clinical medical physicists will allow to overcome the limitations of residency in hospitals, to reduce the workload for clinical supervisors and develop appropriate educational activities. Conclusion: We demonstrated the feasibility of adaptable educational strategies, considering available resources. This provides an innovative way for prospective medical physicists, technologists and radiation oncologists. This strategy can be implemented in several regions without formal programs of MP, like most of developing countries. Starting with undergraduate students would allow to reach appropriate certification faster than most of traditional or alternative approaches for education on MP. The authors acknowledge Radiation Consulting Group, LLC, an Arizona Corporation which promotes the use of ionizing radiation in the healing arts, for the “Oscar Luis Caballero” travel grant. The authors thanks to professors Meisbel Daudinot, David Adame and Alexander Pascau for the practices through imagis, imageROC and ANGIODIN PD3000 respectively.

60 APPLIED LIFE SCIENCES↗

A prototype Upper Atmospheric Research Collaboratory (UARC)

The National Collaboratory concept has great potential for enabling 'critical mass' working groups and highly interdisciplinary research projects. We report here on a new program to build a prototype collaboratory using the Sondrestrom Upper Atmospheric Research Facility in Kangerlussuaq, Greenland and a group of associated scientists. The Upper Atmospheric Research Collaboratory (UARC) is a joint venture of researchers in upper atmospheric and space science, computer science, and behavioral science to develop a testbed for collaborative remote research. We define the 'collaboratory' as an advanced information technology environment which enables teams to work together over distance and time on a wide variety of intellectual tasks. It provides: (1) human-to-human communications using shared computer tools and work spaces; (2) group access and use of a network of information, data, and knowledge sources; and (3) remote access and control of instruments for data acquisition. The UARC testbed is being implemented to support a distributed community of space scientists so that they have network access to the remote instrument facility in Kangerlussuaq and are able to interact among geographically distributed locations. The goal is to enable them to use the UARC rather than physical travel to Greenland to conduct team research campaigns. Even on short notice through the collaboratory from their home institutions, participants will be able to meet together to operate a battery of remote interactive observations and to acquire, process, and interpret the data.

Clauer, C. R.↗