Search NASA⌕ Search

SEARCH · Search NASA

Results for “complex oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Spatially Resolved Large Magnetization in Ultrathin BiFeO 3

Complex interactions across the interface in heterostructures can generate novel functionalities not present in the constituent materials. Here, we create a unique ferromagnetic ground state out of normally antiferromagnetic BiFeO 3 (BFO) by interleaving it with layers of ferromagnetic La 0.7 Sr 0.3 MnO 3 . Intriguingly, we found that the magnetization of BFO was aligned opposite to that of the manganite layers. Based on polarized neutron reflectometry (PNR) depth profiling of custom-designed layers, we obtained a net magnetization in the BFO layers of 275 kA/m (~1.83 B/Fe) at 10 K, which is two times larger than the previously reported values. Additionally, ferromagnetic order in the BFO persists up to 200 K, which is much higher than previously seen in BFO heterostructures. Our unprecedented understanding of the evolution of magnetism and functional coupling across the interface between antiferromagnetic and ferromagnetic layers provides a blueprint towards advanced spintronic devices.

36 MATERIALS SCIENCE↗

Long‐Range Non‐Coulombic Coupling at the LaAlO 3 /SrTiO 3 Interface

The LaAlO 3 /SrTiO 3 interface hosts a plethora of gate‐tunable electronic phases. Gating of LaAlO 3 /SrTiO 3 interfaces is usually assumed to occur electrostatically. However, increasing evidence suggests that non‐local interactions can influence and, in some cases, dominate the coupling between applied gate voltages and electronic properties. Here, quasi‐1D ballistic electron waveguides are sketched at the LaAlO 3 /SrTiO 3 interface as a probe to understand how gate tunability varies as a function of spatial separation. Gate tunability measurements reveal the scaling law to be at odds with the pure electrostatic coupling observed in traditional semiconductor systems. The non‐Coulombic gating at the interface is attributed to a long‐range nanoelectromechanical coupling between the gate and electron waveguide, possibly mediated by the ferroelastic domains in SrTiO 3 . The long‐range interactions at the LaAlO 3 /SrTiO 3 interface add unexpected richness and complexity to this correlated electron system.

36 MATERIALS SCIENCE↗

Anion Exchange Membranes: Current Status and Moving Forward

This short review is meant to provide the reader with highlights in anion exchange membrane research, describe current needs in the field, and point out promising directions for future work. Anion exchange membranes (AEMs) provide one possible route to low platinum or platinum-free fuel cells with the potential for facile oxidation of complex fuels beyond hydrogen and methanol. AEMs and related stable cationic polymers also have applications in energy storage and other electrochemical technologies such as water electrolyzers and redox flow batteries. While anion exchange membranes have been known for a long time in water treatment applications, materials for electrochemical technology with robust mechanical properties in thin film format have only recently become more widely available. High hydroxide and bicarbonate anion conductivity have been demonstrated in a range of AEM formats, but intrinsic stability of the polymers and demonstration of long device lifetime remain major roadblocks. Novel approaches to stable materials have focused on new types of cations that employ delocalization and steric shielding of the positive center to mitigate nucleophilic attack by hydroxide. A number of promising polymer backbones and membrane architectures have been identified, but limited device testing and a lack of understanding of the degradation mechanisms in operating devices is slowing progress on engineered systems with alkaline fuel cell technology. Our objective is to spur more research in this area to develop fuel cell systems that approach the costs of inexpensive batteries for large-scale applications. (c) 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 1727-1735, 2013

Hickner, MA↗

Migration Kinetics of Surface Ions in Oxygen-Deficient Perovskite During Topotactic Transitions

Oxygen diffusivity and surface exchange kinetics underpin the ionic, electronic, and catalytic functionalities of complex multivalent oxides. Towards understanding and controlling the kinetics of oxygen transport in emerging technologies, it is highly desirable to reveal the underlying lattice dynamics and ionic activities related to oxygen variation. In this study, the evolution of oxygen content is identified in real-time during the progress of a topotactic phase transition in La 0.7 Sr 0.3 MnO 3-δ epitaxial thin films, both at the surface and throughout the bulk. Using polarized neutron reflectometry, a quantitative depth profile of the oxygen content gradient is achieved, which, alongside atomic-resolution scanning transmission electron microscopy, uniquely reveals the formation of a novel structural phase near the surface. Surface-sensitive X-ray spectroscopies further confirm a significant change of the electronic structure accompanying the transition. The anisotropic features of this novel phase enable a distinct oxygen diffusion pathway in contrast to conventional observation of oxygen motion at moderate temperatures. The results provide insights furthering the design of solid oxygen ion conductors within the framework of topotactic phase transitions.

36 MATERIALS SCIENCE↗

A new interatomic potential for mixed Mg-Al-Ga-In spinels

While density functional theory (DFT) has become the de facto approach for accurate simulation of materials at the atomic scale, there are many aspects of materials that are simply out of reach of DFT methods. In particular, finite temperature properties such as diffusivities, the structure and properties of grain boundaries and interfaces, and the study of defect properties in complex alloys are computationally challenging for DFT methods. Recently, a new class of spinels in which three cations order over two sublattices was discovered. In order to predict the properties of these types of structures, classical potentials are a must. Here, in this work, we derive a new classical potential for Mg-bearing spinels in which the B cations are Al, Ga, and/or In. The potential does well in describing the DFT energetics of various spinel structures as a function of chemistry and inversion. In particular, it reproduces the thermodynamically favorable MgAlGaO 4 structure while correctly predicting that neither MgAlInO 4 nor MgGaInO 4 are stable. Further, it reproduces physical trends in elastic properties as compared against experiment.

36 MATERIALS SCIENCE↗

Evolution of electronic structure across the rare-earth RNiO 3 series

Here, the perovksite rare-earth nickelates, RNiO 3 (R = La… Lu), are a class of materials displaying a rich phase-diagram of metallic and insulating phases associated with charge and magnetic order. Being in the charge transfer regime, Ni 3+ in octahedral coordination displays a strong hybridization with oxygen to form 3d-2p mixed states, which results in a strong admixture of 3d 8 L_ into 3d 7 , where L_ denotes a hole on the oxygen. To understand the nature of this strongly hybridized ground state, we present a detailed study of the Ni and O electronic structure using high-resolution soft X-ray absorption spectroscopy (XAS). Through a comparison of the evolution of the XAS line-shape at Ni L- and O K-edges across the phase diagram, we explore the changes in the electronic signatures in connection with the insulating and metallic phases that support the idea of hybridization playing a fundamental role.

36 MATERIALS SCIENCE↗

Resolving metal binding properties within subunits of a multimeric enzyme Mnx by surface induced dissociation and native ion mobility mass spectrometry

Multi-subunit enzymes function as coordinated assemblies. Yet most enzymatic assays measure the summed output of all populations in solution and cannot easily differentiate contributions of individual subunits. Native mass spectrometry detects intact protein complexes in the gas phase. Surface induced dissociation further releases subunits from protein complexes while retaining compact conformations and bound ligands. Combined with ion mobility, the released subunits can then be carefully monitored for more in-depth structural analysis. Mnx is a unique bacterial multicopper oxidase complex that oxidizes Mn(II) to form MnO 2 minerals, and is composed of three subunits: MnxG, a multicopper oxidase containing the active site, and two accessory proteins, MnxE and MnxF which also bind copper ions. Other known multicopper oxidases do not require accessory proteins, therefore the functions of MnxE and MnxF are not well understood. Here, we use native mass spectrometry with surface induced dissociation and ion mobility to characterize the metal binding properties of Mnx with two metals, catalytic Cu(II) and Mn(II) substrate. We demonstrate our assay can detect subtle structural changes within each subunit, which are presumably related to the allosteric mechanism. We also noticed that ionic strength and solution composition can impact metal binding and must be carefully investigated for such experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impacts of ruthenium valence state on the electrocatalytic activity of ruthenium ion-complexed graphitic carbon nitride/reduced graphene oxide nanosheets towards hydrogen evolution reaction

Design and engineering of effective electrode catalysts represents a critical first step for hydrogen production by electrochemical water splitting. Nanocomposites based on ruthenium atomically dispersed within a carbon scaffold have emerged as viable candidates. In the present study, ruthenium metal centers are atomically embedded within graphitic carbon nitride/reduced graphene oxide nanosheets by thermal refluxing. Subsequent chemical reduction/oxidation leads to ready manipulation of the ruthenium valence state, as evidenced in microscopic and spectroscopic measurements, and hence enhancement/diminishment of the electrocatalytic activity towards hydrogen evolution reaction in both acidic and alkaline media. Further, this is largely ascribed to the increased/reduced contribution of the Ru valence electrons to the density of state near the Fermi level which dictates the binding and reduction of hydrogen. Results from this study highlight the significance of the valence state of metal centers in the manipulation and optimization of the catalytic performance of single atom catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical vibrational spectra and proposed crystal structure of ε-UO 3

ε-UO 3 is an exotic polymorph in the uranium trioxide system with an undetermined crystal structure and limited optical vibrational spectroscopic data. To improve understanding of this compound, we synthesize and investigate the crystal structure and optical vibrational spectra of ε-UO 3 . Infrared spectra collected for ε-UO 3 are in good agreement with previously published results, and our studies extend the available data into the low-energy (600–100 cm –1 ) regime. For the first time, Raman spectra are presented for ε-UO 3 using both 785 and 532 nm excitation wavelengths. Previous reports suggest an impurity phase may be present in ε-UO 3 produced by calcination of U 3 O 8 ; however, spectral center-of-mass calculations, principal component analyses, and Raman spectroscopic mapping employed to investigate this possibility indicate that the product of U 3 O 8 calcined in O 3 (g) in this work is likely phase-pure. A possible novel structure solution for ε-UO 3 is determined via Rietveld refinement of powder X-ray diffraction data and is triclinic, P-1, with a = 4.01 Å, b = 3.85 Å, c = 4.18 Å, and α = 98.26°, β = 90.41°, γ = 120.46° (R wp = 8.30%). The asymmetric unit of ε-UO 3 consists of U(VI) in hexagonal bipyramidal coordination with displaced equatorial oxygen. Further analysis reveals that the structure of ε-UO3 is best described by a 2 × 1 × 2 supercell structure in P-1 with a = 8.03 Å, b = 3.86 Å, c = 8.37 Å with α = 98.26°, β = 90.41°, and γ = 120.46°, although a higher-symmetry structure is possible. Optical vibrational spectroscopic and structural measurements of ε-UO 3 presented here furthers our understanding of this complex uranium oxide and clarifies the origin of reported structural similarity to U 3 O 8 .

-UO3↗

Metallic Re-Re bond formation in different MRe{sub 2}O{sub 6} (M=Fe, Co, Ni) rutile-like polymorphs: The role of temperature in high-pressure synthesis

Different polymorphs of MRe{sub 2}O{sub 6} (M=Fe, Co, Ni) with rutile-like structures were prepared using high-pressure high-temperature synthesis. For syntheses temperatures higher than {approx}1573 K, tetragonal rutile-type structures (P4{sub 2}/mnm) with a statistical distribution of M- and Re-atoms on the metal position in the structure were observed for all three compounds, whereas rutile-like structures with orthorhombic or monoclinic symmetry, partially ordered M- and Re-ions on different sites and metallic Re-Re-bonds within Re{sub 2}O{sub 10}-pairs were found for CoRe{sub 2}O{sub 6} and NiRe{sub 2}O{sub 6} at a synthesis temperature of 1473 K. According to the XPS measurements, a mixture of Re{sup +4}/Re{sup +6} and M{sup 2+}/M{sup 3+} is present in both structural modifications of CoRe{sub 2}O{sub 6} and NiRe{sub 2}O{sub 6}. The low-temperature forms contain more Re{sup +4} and M{sup 3+} than the high-temperature forms. Tetragonal and monoclinic modifications of NiRe{sub 2}O{sub 6} order with a ferromagnetic component at {approx}24 K, whereas tetragonal and orthorhombic CoRe{sub 2}O{sub 6} show two magnetic transitions: below {approx}17.5 and 27 K for the tetragonal and below 18 and 67 K for the orthorhombic phase. Tetragonal FeRe{sub 2}O{sub 6} is antiferromagnetic below 123 K. - Graphical abstract: Complex rhenium oxides MRe{sub 2}O{sub 6} crystallize in different rutile-like polymorphs depending on synthesis temperature. Low temperature modifications contain chains of edge-sharing ReO{sub 6}-octahedra with Re-Re bonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication of shape controlled Fe{sub 3}O{sub 4} nanostructure

Shape-controlled Fe{sub 3}O{sub 4} nanostructure has been successfully prepared using polyethylene glycol as template in a water system at room temperature. Different morphologies of Fe{sub 3}O{sub 4} nanostructures, including spherical, cubic, rod-like, and dendritic nanostructure, were obtained by carefully controlling the concentration of the Fe{sup 3+}, Fe{sup 2+}, and the molecular weight of the polyethylene glycol. Transmission Electron Microscope images, X-ray powder diffraction patterns and magnetic properties were used to characterize the final product. This easy procedure for Fe{sub 3}O{sub 4} nanostructure fabrication offers the possibility of a generalized approach to the production of single and complex nanocrystalline oxide with tunable morphology.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Neutron powder diffraction and magnetic study of perovskites Pb(Mn{sub 1/2}Nb{sub 1/2})O{sub 3} and Pb(Mn{sub 1/4}Fe{sub 1/4}Nb{sub 1/2})O{sub 3}

The structural and magnetic properties of the complex metal oxides Pb(Mn{sub 1/2}Nb{sub 1/2})O{sub 3} (PMNO) and Pb(Mn{sub 1/4}Fe{sub 1/4}Nb{sub 1/2})O{sub 3} (PMFNO), which belong to a class of disordered perovskites have been studied. The magnetic susceptibilities of PMNO showed hysteresis between field cooled and zero-field cooled conditions below the transition of 15 K, suggesting that the material has a spin-glass feature. Neutron diffraction patterns of PMNO showed no evidence of a long-range magnetic ordering at 1.5 K, which is consistent with spin-glass behavior. Rietveld refinements of neutron powder diffraction data collected at different temperatures between 1.5 and 700 K have been carried out in order to extract structural information. The crystal structure of this compound is cubic (space group Pm3-barm) within the whole temperature interval. The Mn and Nb ions were found to be disordered over the perovskite B-sites. The main feature of this structure is the positional disorder at the Pb site, the importance of which in connection with the ferroic transitions is briefly discussed. The Pb cations show a positional disorder shifting from their high-symmetry positions along the [1 1 1] direction. The effect of Fe-doping on PMNO has been studied. The substitution of Fe at the Mn site in PMFNO results in a small changes of the magnetic properties without significant differences in the crystal structures. The factors governing the observed structural and magnetic properties of PMNO and PMFNO are discussed and compared with those of other quaternary Mn-containing perovskites. For the PbB{sup 3+}{sub 1/2}Nb{sub 1/2}O{sub 3} series with the isomorphous substitution B{sup 3+}, graphs of average lattice parameters of the perovskite phase and the temperatures of ferroelectric and magnetic phase transitions as functions of the B{sup 3+} cation radius were constructed and are discussed. Influence of A-cation sublattice on magnetic properties is also considered.

36 MATERIALS SCIENCE↗

New type of incommensurate magnetic ordering in Mn{sub 3}TeO{sub 6}

Highlights: {yields} Mn{sub 3}TeO{sub 6} has a corundum related structure and orders magnetically below 23 K. {yields} The magnetic structure consists of several types of Mn-chains. {yields} The unique Mn site is split into two magnetically different orbits. {yields} One orbit forms a perfect helix with the spiral axis along the c-axis. {yields} The other orbit has a sine wave character along the c-axis. -- Abstract: The complex metal oxide Mn{sub 3}TeO{sub 6} exhibits a corundum related structure and has been prepared both in forms of single crystals by chemical transport reactions and of polycrystalline powders by a solid state reaction route. The crystal structure and magnetic properties have been investigated using a combination of X-ray and neutron powder diffraction, electron microscopy, calorimetric and magnetic measurements. At room temperature this compound adopts a trigonal structure, space group R3{sup -bar} with a = 8.8679(1) A, c = 10.6727(2) A. A long-range magnetically ordered state is identified below 23 K. An unexpected feature of this magnetic structure is several types of Mn-chains. Under the action of the incommensurate magnetic propagation vector k = [0, 0, 0.4302(1)] the unique Mn site is split into two magnetically different orbits. One orbit forms a perfect helix with the spiral axis along the c-axis while the other orbit has a sine wave character along the c-axis.

36 MATERIALS SCIENCE↗

Electronic structure of superconducting nickelates probed by resonant photoemission spectroscopy

We report the discovery of infinite-layer nickelate superconductors has spurred enormous interest. While the Ni 1+ cations possess nominally the same 3d 9 configuration as Cu 2+ in cuprates, the electronic structure variances remain elusive. Here, we present a soft X-ray photoemission spectroscopy study on parent and doped infinite-layer Pr-nickelate thin films with a doped perovskite reference. By identifying the Ni character with resonant photoemission and comparison with density functional theory + U (on-site Coulomb repulsion energy) calculations, we estimate U ~5 eV, smaller than the charge transfer energy Δ ~8 eV, confirming the Mott-Hubbard electronic structure in contrast to charge-transfer cuprates. Near the Fermi level (E F ), we observe a signature of occupied rare-earth states in the parent compound, which is consistent with a self-doping picture. Our results demonstrate a correlation between the superconducting transition temperature and the oxygen 2p hybridization near E F when comparing hole-doped nickelates and cuprates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Natural Circulation Patterns in the VHTR Air-Ingress Accident and Related Issues

Natural circulation patterns in the VHTR during a hypothetical air-ingress accident have been investigated using computational fluid dynamic (CFD) methods in order to compare results from the previous 1-D model which was developed using GAMMA code for the air-ingress analyses. The GT-MHR 600 MWt reactor was selected to be the reference design and modeled by a half symmetric 3-D geometry using FLUENT 6.3, a commercial CFD code. CFD simulations were carried out as the steady-state calculation, and the boundary conditions were either assumed or provided from the 1-D GAMMA code results. Totally, 12 different cases have been reviewed, and many notable results have been obtained through in this work. According to the simulations, natural circulation patterns in the reactor were quite different from the previous 1-D assumptions. A large re-circulation flow with thermal stratification phenomena was clearly observed in the hot-leg and the lower plenum in the 3-D model. This re-circulation flow provided about an order faster air-ingress speed (0.46 m/s in superficial velocity) than previously predicted by 1-D modeling (0.02~0.03 m/s). It indicates that the 1-D air-ingress modeling may significantly distort the air-ingress scenario and consequences. In addition, complicated natural circulation patterns are eventually expected to result in very complex graphite oxidations and corrosion behaviors.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗