Search NASA⌕ Search

SEARCH · Search NASA

Results for “damage evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Tribological behaviors of nanotwinned Al alloys

Wear-induced damages cause significant materials loss each year. Al alloys are widely used by industry but usually have low wear resistance. Here, we compare the tribological behaviors of ultrafine grained Al, a nanoprecipitate hardened Al 7075 alloy and nanotwinned Al–Ni alloys using the nanoscratch. The nanotwinned Al–Ni alloys exhibit lower coefficient of friction and much greater wear resistance than the Al and Al 7075 alloys. Additionally, the enhanced wear properties of Al–Ni alloys arise from their high strength and the evolution of nanotwinned microstructures into gradient nanograins during wear. These findings on fundamental wear mechanisms in nanotwinned alloys may advance the discovery of wear-resistant metallic materials.

36 MATERIALS SCIENCE↗

MD simulation of plastic deformation nucleation in stressed crystallites under irradiation

The investigation of plastic deformation nucleation in metals and alloys under irradiation and mechanical loading is one of the topical issues of materials science. Specific features of nucleation and evolution of the defect system in stressed and irradiated iron, vanadium, and copper crystallites were studied by molecular dynamics simulation. Mechanical loading was performed in such a way that the modeled crystallite volume remained unchanged. The energy of the primary knock-on atom initiating a cascade of atomic displacements in a stressed crystallite was varied from 0.05 to 50 keV. It was found that atomic displacement cascades might cause global structural transformations in a region far larger than the radiation-damaged area. These changes are similar to the ones occurring in the process of mechanical loading of samples. They are implemented by twinning (in iron and vanadium) or through the formation of partial dislocation loops (in copper).

36 MATERIALS SCIENCE↗

Effects cascade debris and helium bubbles on the strength of aged plutonium

The radioactive decay of aging Pu is dominated by α-decay. This persistent α-decay produces crystalline defects in the form of dislocation loops and helium bubbles that evolve with time. Comparable defects are produced in other metallic alloys when subject to neutron irradiation, and these defects are known to modify the plastic deformation of irradiated materials. Models have been developed for these irradiated materials and validated against experimental confirmations of yield strength and the concomitant microstructural evolution. In this paper, we deploy those previously developed models and apply their mechanics to plutonium aging.

Chemical elements↗

Integrated Surface Topography Characterization of Variously Polished Niobium for Superconducting Particle Accelerators

As superconducting niobium radio-frequency (SRF) cavities approach fundamental material limits, there is increased interest in understanding the details of topographical influences on realized performance limitations. Micro-and nano-roughness are implicated in both direct geometrical field enhancements as well as complications of the composition of the 50 nm surface layer in which the super-currents flow. Interior surface chemical polishing (BCP/EP) to remove mechanical damage leaves surface topography, including pits and protrusions of varying sharpness. These may promote RF magnetic field entry, locally quenching superconductivity, so as to degrade cavity performance. A more incisive analysis of surface topography than the widely-used average roughness is needed. In this study, a power spectral density (PSD) approach based on Fourier analysis of surface topography data acquired by both stylus profilometry and atomic force microscopy (AFM) is being used to distinguish the scale-dependent smoothing effects. The topographical evolution of the Nb surface as a function of different steps of EP is reported, resulting in a novel qualitative and quantitative description of Nb surface topography.

43 PARTICLE ACCELERATORS↗

Multiscale Modeling of Radiation Damage in UO 2 under Accelerated Burnup Conditions

Accelerated fuel qualification (AFQ) is a methodology by which new nuclear fuels are developed in an accelerated time frame compared with historical fuel qualification approaches. AFQ generally relies on high-fidelity physics-based modeling and simulation tools to adequately describe fuel performance as well as on revolutionary methods to accelerate burnup accumulation and collect relevant data more quickly. This report summarizes the use of advanced fuel modeling and simulation tools to evaluate microstructures from commercially irradiated fuel and microstructures from proposed MiniFuel irradiations, in which burnup accumulation is accelerated while prototypic temperature conditions are maintained. In this milestone, we used the mesoscale fuel performance code MARMOT to model the evolution of irradiated UO 2 microstructures and their potential restructuring at high burnup. The simulation conditions were informed by BISON models of both commercially irradiated fuel and MiniFuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Deformation and fracture behavior of a laser powder bed fusion processed stainless steel: In situ synchrotron x-ray computed microtomography study

Tensile plastic deformation and fracture behavior of a laser powder bed fusion processed 316L stainless steel alloy was investigated in situ using high-resolution synchrotron x-ray computed microtomography (sXCT). Three different cases were studied: (1) specimen A1, near full-density with initial porosity of 0.04%, (2) specimen B1, initial lack-of-fusion (LOF) porosity of about 3% with the major axis of defects aligned nearly perpendicular to the tensile loading direction (LD), and (3) specimen B, similar to B1 but with the major axis of LOF defects aligned nearly parallel to LD. The effects of type, density, and orientation of defects in as-printed samples on plastic deformation and failure modes were studied by analyzing sXCT image sequences and quantitative defect properties. Specifically, the evolutions of porosity, size, aspect ratio, and angle of gas pores and LOF defects were characterized as a function of applied strain. Moreover, interactions between as-printed defects and deformation-induced crack propagation were investigated. The tensile behavior of specimen A1 was comparable to that of a commercial wrought plate. Furthermore, the quantitative in-situ sXCT results showed a void-growth phenomenon in A1 but without noticeable coalescence, resulting in a ductile cup-cone failure. Specimen B1 showed damage-driven brittle failure with limited plasticity due to early and rapid propagation of open voids. On the other hand, specimen B, with a similar amount of LOF defects as B1, showed deceivingly strong and ductile tensile behavior similar to A1 without any major crack propagations due to the favorable orientation relationship between LOF defects and the LD.

36 MATERIALS SCIENCE↗

Detailed space–time variations of the seismic response of the shallow crust to small earthquakes from analysis of dense array data

SUMMARY We compute high-resolution space–time variations of subsurface seismic properties from autocorrelation functions (ACF’s) of noise and local earthquakes, recorded by the Sage Brush Flat dense array deployed around the Clark branch of the San Jacinto fault. The resolved temporal changes are referred to as apparent velocity changes because they reflect both nonlinear response and variations of material properties such as cracking and damage. Apparent velocity changes are estimated at four frequency bands (10–15, 10–20, 15–30 and 20–40 Hz) for two local earthquake data sets. In one analysis, ACF’s from P- and S-wave windows of 31 small events with magnitudes below 3.1 are used to compute the apparent velocity variations with respect to the mean ACF of each phase, and we also use the mean ACF of noise data as reference to estimate the changes. In a further analysis, the temporal evolution of properties is computed using moving time windows in continuous waveform over one-hour long data with noise and earthquake signals. The apparent velocity changes and recovery times are frequency dependent and present a strong spatial variability across the array. The resolved changes are larger and recovery time shorter with data associated with higher frequencies. At frequencies larger than 15 Hz, and using the mean ACF of noise data as a reference, the apparent average velocity changes across the array during the passage of the P and S waves from the small local events are 2.5 per cent and 6 per cent, respectively. The apparent velocity changes decrease by one order of magnitude when the earthquake data are used as a reference. The relatively large changes in response to very low ground motion have important implications on nonlinear processes involving degradation and healing of the subsurface material during common earthquake shaking.

Geochemistry & Geophysics↗

Crack tip microplasticity mediated by microstructure gradients

Abstract Traditional fracture theories infer damage at cracks (local field) by surveying loading conditions away from cracks (far field). This approach has been successful in predicting ductile fracture, but it normally assumes isotropic and homogeneous materials. However, myriads of manufacturing procedures induce heterogeneous microstructural gradients that can affect the accuracy of traditional fracture models. This work presents a microstructure‐sensitive finite element approach to explore the shielding effects of grain size and crystallographic orientation gradients on crack tip microplasticity and blunting. A dislocation density‐based crystal plasticity model conveys texture evolution, grain size effects, and directional hardening by computing the constraint from dislocation structures. The results demonstrate that the microstructure can act as a buffer between the local and far fields that affects the crack tip microplasticity variability. For nominal opening loading, grain size and texture affect the local ductility and induce a non‐negligible multiaxial plastic deformation. Furthermore, driving forces based on measuring displacements away from the crack tip are less affected by the microstructure, which suggests that traditional experimental methods smear out important crack tip variability.

Castelluccio, Gustavo M.↗

Understanding of corrosion mechanisms after irradiation: effect of ion irradiation of the oxide layers on the corrosion rate of M5 - 2016-0081

Irradiation damage in fuel cladding material is mainly caused by the neutron flux that results from fission reactions occurring in the fuel. To avoid the constraints inherent in handling radioactive material, the irradiation effects on the corrosion resistance of zirconium alloys can be studied by irradiating the materials with ions. We performed an original experiment using ion irradiation to more specifically study the influence of irradiation damage in the oxide on the corrosion rate of M5{sup R}. It has been established that irradiation with a 1.3-MeV helium ion at a fluence of 10{sup 17} cm{sup -2} results in significant modifications of oxide properties, oxygen diffusion flux, and oxidation kinetics, as evidenced by Raman spectroscopy, secondary ion mass spectrometry (SIMS) analyses, and measurements of mass gains. A newly identified Raman vibration band at 712 cm{sup -1} was linked to the presence of irradiation defects and allowed the evolution of their concentrations to be followed. The oxygen diffusion flux was significantly reduced after irradiation partly due to a surface concentration decrease of oxygen. The defects remained present in the oxide after 100 days of annealing in pressurized water reactor (PWR) conditions and were thus very stable in PWR conditions, which probably means that these defects would be stable in the reactor. According to the kinetics and in agreement with the results obtained by SIMS analyses, the oxidation rate was significantly reduced after ion irradiation, and this effect remained beyond 100 days in agreement with the high stability of irradiation defects in PWR conditions. An original model described quite well the oxidation kinetic results. (authors)

36 MATERIALS SCIENCE↗

Report on Aging and Irradiation Theoretical Model Development for Alloy 690 in Grizzly

This report describes the current efforts to implement a model to predict the engineering scale behavior of irradiated and aged Ni 2 Cr model alloy and Alloy 690 into the Grizzly software. Grizzly is a multiphysics simulation code under development at Idaho National Laboratory to simulate aging mechanisms and their effects on the integrity of critical LWR components. Engineering scale behavior of materials are strongly impacted by the underlying microstructure: the distribution and interaction of dislocations and defects within the individual grains dictates how the material will respond to loading. The evolution of these dislocations and defects determines how the engineering scale material will perform under different loading and environmental conditions. Mesoscale models can function as a bridge to connect microstructure evolution models to engineering models of the ductile-brittle transition temperature (DBTT) curve and fracture. The toughness of a material, which governs the engineering scale fracture behavior, is a function of both elastic deformation and plastic deformation. While the yield stress measurements capture the elastic contribution to a material’s toughness, information about the dislocation movement is required to understand the plastic component of toughness. Crystal plasticity models predict dislocation density evolution and thereby connect microstructure evolution to engineering scale behavior predictions. These models calculate the plastic strain within a metal as a function of dislocations and other crystal defects, including precipitates and interstitial loops, among others, by tracking dislocation movement and the interaction of these dislocations with the crystal defects. Within NiCr alloys, long-range ordered (LRO) precipitates form under aging conditions. These precipitates act as barriers to dislocation motion and are either sheared by dislocations or pin dislocations. Additional defects, such as stacking fault tetrahedra (SFTs) from irradiation damage, also impede dislocation motion in these alloys. A crystal plasticity mode for Ni 2 Cr model alloy and Alloy 690 is being currently implemented in the Grizzly code at INL. This report includes a description of the theoretical models incorporated into the Grizzly crystal plasticity code. These theoretical models include mechanisms for dislocation glade and twinning as well as dislocation-defect interaction relationship for both LRO precipitates and SFTs. We have selected these dislocation models based on the deformation mechanisms observed in experimental micropillar compression tests conducted on the Ni 2 Cr model alloy. The models are then extended to Alloy 690 with ongoing parameter fitting.

36 MATERIALS SCIENCE↗

Effect of alloying elements on defect evolution in Ni-20X binary alloys

The effect of alloying elements on radiation-induced microstructural evolution in Ni and Ni-20X (X = Fe, Cr, Mn and Pd) binary alloys was investigated using ion irradiation and cross-sectional transmission electron microscopy. The three-dimensional migration mode is identified to be the dominating migration mechanism for interstitial clusters in these binary alloys, contrary to the one-dimensional mode that dominates in the well-studied dilute alloys. The results reveal that: (1) the average size of defect clusters decreases as the solute atomic volume size factor increases. Smaller void size in Ni-20Cr is attributed to faster vacancy mobility in the near surface region, and weaker vacancy binding energy beyond the irradiation peak than Ni-20Fe. The smaller voids observed in Ni-20Mn and Ni-20Pd beyond the damage peak are due to the stronger Mn/Pd-vacancy binding effect of largely oversized solute atoms. (2) Oversized solutes can act as strong trapping sites for interstitials. The larger the solute atomic volume factor, the stronger the trapping force. This leads to a more significantly sluggish interstitial migration and smaller dislocation loop size. The average dislocation loop size in Ni-20Fe was four times larger than Ni-20Pd (atomic volume factor being 10.6% and 41.3%) but an order of magnitude lower in density. The smaller dislocation loop size in Ni-20Cr is attributed to stronger interstitial binding of Cr-Ni. In conclusion, overall, the alloying effect on defects is more significant in concentrated binary alloys than in dilute binary alloys, due to the concentration difference of alloying atoms and the interstitial dominant migration mechanisms in the main irradiated region.

36 MATERIALS SCIENCE↗

Supersonic hot jet ablative testing and analysis of boron nitride nanotube hybrid composites

Boron nitride nanotubes (BNNTs) are high-strength, high-modulus nanotubes with high thermal and oxidative stabilities. Two hybrid composites were prepared with satin weave carbon fiber (CF) and resole-type phenolic resin: one with surface layers of BNNTs and one with alternating interlayers of BNNTs. The samples were subjected to hot jet tests that simulate realistic high-pressure-temperature conditions to understand the behavior of BNNTs under high-pressure erosion. Adding BNNTs to CF/phenolic laminates enhanced the ablation resistance by reinforcing the char material and mitigated localized thermal damage. Hybrid laminates exhibited up to 14% lower weight loss, 55% increase in flexural modulus, higher thermal diffusivity, and improved char yield and microstructure compared to CF/phenolic samples. The surface layer hybrid had many surviving nanotubes reinforcing the char and crystalline oxide structures that could mitigate further oxygen diffusion. Further, various characterization methods were used to deduce possible mechanisms and their products, indicating that BNNTs could serve as growth templates for direct crystalline boron oxide formation. Overall, hybrid BNNT/CF/phenolic laminates displayed better ablation resistance and favorable microstructure evolution under high-pressure conditions.

42 ENGINEERING↗

Radiological analysis and transmutation calculation of representative castable nanostructured alloys

In this work, radiological analysis regarding the waste management was performed on two current reduced-activation ferritic-martensitic (RAFM) steels Eurofer 97 and F82H and two castable nanostructured alloys (CNAs) CNA1 and CNA3 using the European DEMO first wall spectrum. CNA1 and CNA3 are a new generation of RAFM steels, which have increased amounts of nanoscale carbonitrides and carbides precipitates, respectively, via small composition modifications. Furthermore, the increased nitrogen in CNA1 leads to higher activity at ≥50 years, and thus to the disposal concern under the current NRC regulation. However, the calculation using Fetter’s evaluation leads to reduced waste disposal rating (WDR) of down to 0.25 depending on the damage dose from ~0.05 wt percent nitrogen in CNA1, and thus less concern on the waste disposal. Contact dose rate after 10 years from the first wall replacement primarily depends on the initial Co and Nb impurity levels. Other added elements, such as V and Si in CNA1 and Ti and Mn in CNA3, do not have significant effect on the specific activity, contact dose rate, or decay heat. Composition limits of CNAs are given based on the shallow burial disposal and materials recycling. In addition, composition evolution of typical precipitates in the CNAs was calculated using the DEMO first wall and the HFIR spectra. Larger transmutation-induced composition evolution occurs in the V/Ta-rich carbonitrides in CNA1 than that in the Ti-rich carbides in CNA3.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Report on Modeling Coupled Processes in the Near Field of a Clay Repository

Clay/shale has been considered as potential host rock for geological disposal of high-level radioactive waste throughout the world. Coupled thermal, hydrological, mechanical, and chemical (THMC) processes have a significant impact on the long-term safety of a clay repository. For example, the excavation damaged zone (EDZ) near repository tunnels can modify local permeability (resulting from induced fractures), potentially leading to less confinement capability. This report documents results from three R&D activities: (1) implementation and validation of constitutive relationships, (2) development of a discrete fracture network (DFN) model for investigating coupled processes in the EDZ, and (3) development of a THM model for the FE tests at Mont Terri, Switzerland, for the purpose of model validation. The overall objective of these activities is to provide an improved understanding of EDZ evolution in clay repositories and the associated coupled processes, and to develop advanced relevant modeling capabilities.

54 ENVIRONMENTAL SCIENCES↗

Time at Temperature Abstract and Intern Poster

Current NRC regulations for BWR operations dictate that any occurrence reaching the point of Departure from Nucleate Boiling (DNB) disqualifies the use of the fuel rod for further reactor operation. That criteria does not account for duration of rate of the power increase, the corresponding effects on material properties or rewetting that may occur. Previous Anticipated Operational Occurrences (AOOs) show short durations power increase that may require limited amounts of heat removal. Industrial experience has shown evidence that fuel can reach dryout yet continue to safely operate in regular reactor conditions. The gap in research into such occurrences is the motivation for a series of experiments, including this current work. Time-at-Temperature experiments aim to identify and characterize the microstructural changes in Zircaloy-2 under oxygen-free high temperatures. This work uses the FlashDSC instrument to rapidly ramp up and down the temperature of a focus ion beam (FIB) prepared large area lift-out (LALO) of Zircaloy-2 at a rate of 10,000 K/s to desired values. The focus is to characterize the microstructure evolution, if any, of Zircaloy-2 that may impact its performance under typical BWR conditions. This characterization includes analyzing grain structure and size, secondary phase particle (SPPs) size, shape, composition, and location using Transmission Electron Microscopy (TEM). Further data collection and analysis is in progress including diffraction pattern indexing and 4D STEM processing. While current results focus on the testing and characterizing unirradiated material, future plans include expansion to irradiated material to explore the effects of rapid transition rates seen in DNB and dryout conditions on irradiationg damage and defect annealing.

36 - MATERIALS SCIENCE↗

German experiences in local fatigue monitoring

The ageing management of nuclear power plants (NPP) has gained an increasing importance in the last years. The reasons are mainly due to the international context of extending period of plants operation. Moreover, new scientific discoveries, such as the corrosive influence of the medium on the fatigue process (environmentally assisted fatigue - EAF) play an important role and influence the code development (ASME, EAF code cases). The fatigue damage process takes a central position in ageing mechanisms of components. It must be ensured through appropriate evidence that facilities are being operated under allowable boundary conditions. In the design phase of NPP, fatigue analyses are still based on theoretical considerations and empirical values, which are summarized in the design transient catalogue, necessary for licensing. These analyses aim at proving the admissibility of the loads in terms of stress and fatigue usage. These analyses will also provide the fatigue-relevant positions in the NPP and give a basis for future design improvements and optimization of operating modes. The design transients are in practice conservatively correlated with the real transients occurring during operation. Uncertainties reveal very conservative assumptions regarding forecast temperatures, temperature gradients and frequencies of events. During operation of the plant, it has to be recurrently proved, that the plant is being operated under designed boundary conditions. Moreover, operating signals are constantly acquired to enable a fatigue evaluation. For example, in Germany fatigue evaluation is based on decades of experience and regulatory requirements. The rule KTA 3201.4 [1] establishes the rules for qualified fatigue monitoring. The rule DIN 25475-3 [2] on fatigue monitoring systems is available in draft version. Experience shows that some significant differences occur between the design transients and the real occurred transients during plant operation. The reasons for it are the various manual control options and also different operating modes. It is clear that showing the covering of real loads by design loads, requires a relatively complex and well-qualified detection process. The difficulty of this task is increased due to the lack of data or incomplete information and the exclusive reliance on existing operation plant data. The strategy of employing local fatigue monitoring is a straightforward solution enabling the direct measurement of loads on the fatigue-sensitive zones. Nowadays a direct derivation of the complete stress tensor at the fatigue-relevant locations is enabled thanks to the recorded local loads and combination with finite element (FE) analyses. So, additionally to the recorded temperature curves, a representation of the time evolution of the six stress components for each monitored component is possible. This allows the application of the simplified elasto-plastic fatigue check according to design codes. The fatigue level can be realistically analyzed with a suitable cycle-counting method. Furthermore, the knowledge of the time evolution of the stresses and strains enables to take into account an environmental factor to include the corrosive fluid influence in the calculations. Without local recording, it is impossible to calculate realistic fatigue usage. AREVA offers the AREVA fatigue concept (AFC) and the new fatigue monitoring system integrated (FAMOSi), necessary tools to monitor local fatigue and to provide realistic assessment. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Rupture Jumping and Seismic Complexity in Models of Earthquake Cycles for Fault Stepovers with Off-Fault Plasticity

ABSTRACT Fault stepovers are prime examples of geometric complexity in natural fault zones that may affect seismic hazard by determining whether an earthquake rupture continues propagating or abruptly stops. However, the long-term pattern of seismicity near-fault stepovers and underlying mechanisms of rupture jumping in the context of earthquake cycles are rarely studied. Leveraging a hybrid numerical scheme combining the finite element and the spectral boundary integral methods, FEBE, we carry out fully dynamic simulations of sequences of earthquakes and aseismic slip for both compressive and tensile stepovers with off-fault plasticity. We consider a rate-and-state friction law for the fault friction and pressure-sensitive Drucker–Prager plasticity for the off-fault bulk response. We observe that the accumulation of plastic deformation, an indication of off-fault damage, is significantly different in the two cases, with more plastic deformation projected in the overlapping region for the tensile stepover. The seismic pattern for a tensile stepover is more complex than for a compressive stepover, and incorporating plasticity also increases complexity, relative to the elastic case. A tensile stepover with off-fault plasticity shows rupture segmentation, temporal clustering, and frequent rupture jumping from one fault to another. These results shed light on possible mechanisms of rupture jumping in fault stepovers as well as the long-term evolution of the fault zone.

Geochemistry & Geophysics↗

TRACER-Uncrewed Aircraft System (TRACER-UAS) Field Campaign Report

Convective processes drive the development of clouds across a variety of scales, thereby playing a central role in governing weather and climate globally. These processes help to set the stage for circulations that redistribute heat and moisture throughout the lower atmosphere, and simultaneously develop storms that supply precipitation to regions that depend on such rain events for supporting a variety of societal needs. At the same time, extreme precipitation events can result in localized flooding of low-lying areas, posing hazards to transportation and regional inhabitants, and potentially damaging structures and infrastructure. As a result, there is an inherent need to better understand the drivers and modulators of clouds and precipitation and leverage such understanding to make projections of how these important systems may evolve with a changing climate. With nearly three billion of Earth’s human inhabitants living within 200 km of a shoreline, development of such understanding is particularly important in coastal regimes. Central drivers of convective cloud development and life cycle in coastal environments include synoptic forcing, local meso- and microscale circulation regimes, microphysical evolution, and aerosol properties. Atmospheric boundary layer (ABL) development and its evolution can help drive the formation and organization of convective clouds, which then impart their own controls through dynamic processes related to latent heating and cooling (including cold-pool formation and propagation), three-dimensional radiative effects, and background environmental conditions (Fan et al. 2016). Such clouds have been contributing to record precipitation events in southeast Texas in recent years, relative to the last several decades of data from regional precipitation gauges (Fagnant et al. 2020). The greater Houston urban area has experienced particularly large increases in the frequency of extreme rainfall events, with enhanced intensity of extreme events (stretching of distribution tails) having potentially significant implications for watershed floodplain planning and mapping in greater Houston and Harris County. While the most extreme precipitation events were associated with tropical cyclones (e.g., Tropical Storm Allison and Hurricane Harvey; Blood 2014, Kao et al. 2019), strong thunderstorms can also deliver large amounts of precipitation over the area over relatively short periods.

54 ENVIRONMENTAL SCIENCES↗